Self-assembled reduced graphene oxide/sulfur composite encapsulated by polyaniline for enhanced electrochemistry performance

Reduced graphene oxide/sulfur/polyaniline (referred to RGO/S/PANI) composite was self-assembled through in situ synthesis and used to investigate the electrochemical properties of lithium/sulfur cells. The RGO/S/PANI composite possessed 809.3/801.9 mAh g^?1 of initial charge/discharge capacities, higher than 588.3/588.2 mAh g^?1 for reduced graphene oxide/sulfur (referred to RGO/S) and 681.4/669.9 mAh g^?1 for sulfur/polyaniline (referred to S/PANI) at similar conditions. The RGO/S/PANI composite obtained 400 mAh g^?1 at 2 C and good reversible capacities of 605.5 and 600.8 mAh g^?1 at 100th charge/discharge cycle at 0.1 C, in comparison with low electrochemical performance of RGO/S and S/PANI. The improved properties could be attributed to the collaboration of RGO and PANI. Co-generation of RGO and sulfur acted as seeds for their depositions, stimulated their uniform distributions, and restricted the agglomeration of sulfur particles in situ synthesis. Polyaniline coated RGO/S and stabilized the nanostructure of RGO/S/PANI in repeated charge/discharge cycles. In addition, RGO and PANI provided many electron channels to enhance sulfur conductivity and sufficient void space for sulfur swelling during charge/discharge cycles.     

Microstructural and Potential Dependence Studies of Urease-Immobilized Gold Nanoparticles–Polypyrrole Composite Film for Urea Detection

Gold nanoparticle–polypyrrole nanocomposite film was electrochemically deposited in a single-step polymerization of pyrrole in the presence of 3-mercaptopropionic acid (MPA)-capped gold nanoparticles (GNPs) and p-toluenesulfonic acid (pTSA) on the surface of an indium tin oxide (ITO)-coated glass plate. The carboxyl functional groups surrounding the GNPs within the polymer matrix were utilized for the immobilization of urease enzyme through carbodiimide coupling reaction for the construction of a Urs/GNP(MPA)–PPy/ITO-glass bioelectrode for urea detection in Tris–HCl buffer. The resulting bioelectrode film was characterized by atomic force microscopy (AFM), high-resolution transmission electron microscopy (HRTEM), contact angle measurement, Fourier transform infrared spectroscopy (FTIR), and electrochemical techniques. The potentiometric response of the bioelectrode made of polymer nanocomposite films of two different thicknesses prepared at 100 and 250 mC cm^?2 charge densities, respectively, was studied towards the urea concentration in Tris–HCl buffer (pH 7.4). The thin polymer nanocomposite film-based bioelectrode prepared at 100 mC cm^?2 charge density exhibited a comparatively good potentiometric response than a thick 250 mC cm^?2 charge density film with a linear range of urea detection from 0.01 to 10 mM with a sensitivity of 29.7 mV per decade.     

Synthesis of spherical porous carbon by spray pyrolysis and its application in Li-S batteries

A spherical porous carbon (SPC) with high specific surface area is prepared by spray pyrolysis at 800 °C followed by removing silica template. The prepared SPC is employed as a conductive matrix in the sulfur cathode (S-SPC) for lithium–sulfur secondary batteries. The BET surface area of the prepared SPC sample is as high as 1,133 m² g^?1 and the total pore volume is 2.75 cm³ g^?1. The electrochemical evaluations including charge–discharge tests, cyclic voltammograms (CV), and electrochemical impedance spectrum suggest that the prepared S-SPC composite presents superior electrochemical stability when compared to the S-SP cathode. The as-prepared S-SPC composite shows improved cycle performance. The reversible discharge capacity is about 637 mAh g^?1 after 50 cycles, which is much better than that of the as-prepared sulfur–Super P carbon black composite. It may be attributed to the high porosity and excellent conductive structure of the SPC.     

A facile method to prepare graphene-coat cotton and its application for lithium battery

The free-standing and binder-free electrode materials, cotton/graphene (CGN) composites were prepared via a simple “dipping and freeze-drying” process using raw cotton as the supporting body (platform) and graphene oxide (GO) as the suspension. Then the cotton/GO (CGO) composites were annealed at 1000 °C under an Ar flow conditions to obtain CGN composites. The results show that the CGN structure can protect the cotton framework and have better thermal stable property than the cotton alone. Galvanostatic charge–discharge tests demonstrated that the GO concentration had great effects on their electrochemical performances. The CGN (for the GO with 3 and 5 mg ml^?1) provide reversible discharge capacity of 160 mAh g^?1 after 100 cycles, which is about 1.5 times higher than that of the cotton alone (115 mAh g^?1 after 100 cycles). Excellent electrochemical properties of CGN can be ascribed to its controllable structure with more lithium ion storage sites, high electronic conductivity, and fast ion diffusion velocity. The results suggest that this work develops a simple, cheap, and suitable large-scale production method in the lithium-ion batteries.     

NiO/CNTs derived from metal-organic frameworks as superior anode material for lithium-ion batteries

In this work, porous NiO microspheres interconnected by carbon nanotubes (NiO/CNTs) were successfully fabricated by the pyrolysis of nickel metal-organic framework precursors with CNTs and evaluated as anode materials for lithium-ion batteries (LIBs). The structures, morphologies, and electrochemical performances of the samples were characterized by X-ray diffraction, N₂ adsorption-desorption, field emission scanning electron microscopy, cyclic voltammetry, galvanostatic charge/discharge tests, and electrochemical impedance spectroscopy, respectively. The results show that the introduction of CNTs can improve the lithium-ion storage performance of NiO/CNT composites. Especially, NiO/CNTs-10 exhibits the highest reversible capacity of 812 mAh g^?1 at 100 mA g^?1 after 100 cycles. Even cycled at 2 A g^?1, it still maintains a stable capacity of 502 mAh g^?1 after 300 cycles. The excellent electrochemical performance of NiO/CNT composites should be attributed to the formation of 3D conductive network structure with porous NiO microspheres linked by CNTs, which benefits the electron transfer ability and the buffering of the volume expansion during the cycling process.     

SnO2 sheet/graphite composite as anode material with improved electrochemical performance for lithium-ion batteries

The SnO₂ sheet/graphite composite was synthesized by a hydrothermal method for high-capacity lithium storage. The microstructures of products were characterized by XRD and FE-SEM. The electrochemical performance of SnO₂ sheet/graphite composite was measured by galvanostatic charge/discharge cycling and EIS. The first discharge and charge capacities are 1,072 and 735 mAh g^?1 with coulombic efficiency of 68.6 %. After 40 cycles, the reversible discharge capacity is still maintained at 477 mAh g^?1. The results show that the SnO₂ sheet/graphite composite displays superior Li-battery performance with large reversible capacity and good cyclic performance.     

Polymer template-assisted microemulsion synthesis of large surface area, porous Li2MnO3 and its characterization as a positive electrode material of Li-ion cells

Lithium-rich manganese oxide (Li₂MnO₃) is prepared by reverse microemulsion method employing Pluronic acid (P123) as a soft template and studied as a positive electrode material. The as-prepared sample possesses good crystalline structure with a broadly distributed mesoporosity but low surface area. As expected, cyclic voltammetry and charge–discharge data indicate poor electrochemical activity. However, the sample gains surface area with narrowly distributed mesoporosity and also electrochemical activity after treating in 4 M H₂SO₄. A discharge capacity of about 160 mAh g^?1 is obtained. When the acid-treated sample is heated at 300 °C, the resulting porous sample with a large surface area and dual porosity provides a discharge capacity of 240 mAh g^?1. The rate capability study suggests that the sample provides about 150 mAh g^?1 at a specific discharge current of 1.25 A g^?1. Although the cycling stability is poor, the high rate capability is attributed to porous nature of the material.     

Morphology and performance of CoOOH films synthesized via electrochemical oxidation: substrate effects

In the present work, CoOOH films are synthesized from the electrochemical oxidation of α-Co(OH)₂ as precursor. The substrate influences on the material electrochemical properties are studied. The samples are structural and morphologically characterized using techniques of X-ray diffraction (XRD) and scanning electronic microscopy (SEM). The cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy techniques are used for the electrochemical characterization. The films deposited on steel substrate grew in the vertical hexagonal platelet form. Meanwhile, films on Ti plate presented morphology in agglomerated sphere form. After electrochemical oxidation, the film initial morphology is maintained. The films deposited on steel plate have a structure which favors charge storage showing a high specific capacity value (110.92 mA h g^?1) and cyclic stability of 92% after 1000 cycles. Finally, the relaxation time constant value calculated was 5.6 s. This fact is making this material as a possible good candidate for application as electrode material or additive for other materials, in energy storage devices.     

Lithium garnet based free-standing solid polymer composite membrane for rechargeable lithium battery

Electrolytes with high lithium-ion conductivity, better mechanical strength and large electrochemical window are essential for the realization of high-energy density lithium batteries. Polymer electrolytes are gaining interest due to their inherent flexibility and nonflammability over conventional liquid electrolytes. In this work, lithium garnet composite polymer electrolyte membrane (GCPEM) consisting of large molecular weight (W_avg ~?5?×?10⁶) polyethylene oxide (PEO) complexed with lithium perchlorate (LiClO₄) and lithium garnet oxide Li_6.28Al_0.24La₃Zr₂O₁₂ (Al-LLZO) is prepared by solution-casting method. Significant improvement in Li⁺ conductivity for Al-LLZO containing GCPEM is observed compared with the Al-LLZO free polymer membrane. Maximized room temperature (30 °C) Li⁺ conductivity of 4.40?×?10^?4 S cm^?1 and wide electrochemical window (4.5 V) is observed for PEO₈/LiClO₄?+?20 wt% Al-LLZO (GCPEM-20) membrane. The fabricated cell with LiCoO₂ as cathode, metallic lithium as anode and GCPEM-20 as electrolyte membrane delivers an initial charge/discharge capacity of 146 mAh g^?1/142 mAh g^?1 at 25 °C with 0.06 C-rate.     

One-step hydrothermal synthesis of flower-like SnO2/carbon nanotubes composite and its electrochemical properties

In this work, flower-like SnO₂/carbon nanotubes (CNTs) composite was synthesized by one-step hydrothermal method for high-capacity lithium storage. The microstructures of products were characterized by XRD, FESEM and TEM. The electrochemical performance of the flower-like SnO₂/CNTs composite was measured by cyclic voltammetry and galvanostatic charge/discharge cycling. The results show that the flower-like SnO₂/CNTs composite displays superior Li-battery performance with large reversible capacity and high rate capability. The first discharge and charge capacities are 1,230 and 842 mAh g^?1, respectively. After 40 cycles, the reversible discharge capacity is still maintained at 577 mAh g^?1 at the current densities of 50, 100 and 500 mA g^?1, indicating that it’s a promising anode material for high performance lithium-ion batteries.     

Nickel foam as interlayer to improve the performance of lithium–sulfur battery

In this report, a porous, electronically conductive nickel foam foil (NFF), which is rolled for smooth surface, is introduced as an interlayer placed between the sulfur electrode and the separator to suppress the loss of active material and self-discharge behavior in lithium–sulfur (Li–S) systems. The electrodes are characterized by scanning electron microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic charge–discharge test. The cell with the rolled NFF interlayer shows superior performance in terms of capacity utilization, reversibility, and enhanced rate capability. It exhibits reversible discharge capacity of 604 mAh g^?1 after 80 cycles at 0.2 C, which is much higher than that of pristine sulfur without NFF (424 mAh g^?1). The improvement on electrochemical performance is attributed to the 3D architecture of nickel foam foil as lithium–sulfur batteries interlayer, which can provide a good conductive network with structural stability and the porous architecture accommodating the migrating polysulfide to reduce the shuttling phenomenon during the charge–discharge processes.     

Mesoporous carbon/sulfur composite with N-doping and tunable pore size for high-performance Li-S batteries

Mesoporous carbons (MCs) were used as the matrixes to load sulfur for lithium sulfur (Li-S) batteries, and pore sizes were tuned by heat treatment at different high temperatures. The cathode material shows the highest discharge capacity of 1158.2 mAh g^?1 at the pore size of 4.1 nm among as-prepared nitrogen-free materials with different sizes. Meanwhile, the nitrogen doping of mesoporous carbon helps to inhibit the diffusion of polysulfide species via an enhanced surface adsorption. The carbon/sulfur containing N (4.56%) shows a high initial discharge capacity of 1315.8 mAh g^?1 and retains about 939 mAh g^?1 after 100 cycles at 0.2 C. The improved electrochemical performance is ascribed to the proper pore size, surface chemical property, and conductivity of the N-doped carbon material.     

Self-assembled films based on polypyrrole and carbon nanotubes composites for the determination of Diuron pesticide

In this work, polypyrrole (PPy) and its respective composite with functionalized multi-walled carbon nanotubes (MWCNT) were obtained by chemical polymerization of the monomer pyrrole in aqueous solution. The obtained PPy as well as its composite (PPy-MWCNT) were characterized by Fourier transform infrared spectroscopy (FTIR) and were used to produce nanostructured self-assembled (SA) films deposited onto glass substrates covered with indium tin oxide (ITO). The SA films were produced with alternated layers of polystyrene sulphonated (PSS) and were characterized by UV-visible, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM) analyses. The applicability of the SA films was evaluated by square wave voltammetry (SWV) with standard additions of aliquots of Diuron pesticide in Britton-Robinson buffer solutions (pH = 2.0). The results showed an oxidation peak at 0.23 V which increases in function of the Diuron concentration for both the SA films. It was also observed that the SA film based on the composite (PPy-MWCNT/PSS) showed a peak current intensity about ten times higher in comparison with its unmodified counterpart (PPy/PSS) for a Diuron concentration of 4.29 × 10^?5 mol L^?1, indicating a synergic effect between PPy and MWCNT in the composite. The limits of quantification (LOQ) and limits of detection (LOD) were respectively 8.6 × 10^?7 mol L^?1 and 2.6 × 10^?7 mol L^?1.     

Pyrrolic nitrogen-doped carbon sandwiched monolayer MoS<Subscript>2</Subscript> vertically anchored on graphene oxide for high-performance sodium-ion battery anodes

In this work, a novel pyrrolic nitrogen-doped carbon sandwiched monolayer MoS₂ hybrid was prepared. This sandwiched hybrid vertically anchors on graphene oxide as anode materials for sodium-ion batteries. Such electrode was fabricated by facile ionic liquid-assisted reflux and annealing methods. Owing to rational structure and enhancement from pyrrolic nitrogen dopant, this unique MoS₂/C-graphene hybrid exhibits reversible specific capacity of 486 mAh g^?1 after 1000 cycles with a low average fading capacity of 0.15 mAh g^?1 (fading cyclic rate of ca. 0.03% per cycle). A capacity of 330 mAh g^?1 is remained at the current densities of 10.0 A g^?1. The proposed strategy provides a convenient way to create new pyrrolic nitrogen-doped hybrids for energy field and other related applications.     

Electrochemical properties of LaY2Ni9 hydrogen storage alloy,used as an anode in nickel-metal hydride batteries

The electrochemical properties of LaY₂Ni₉ alloy used as an anode in nickel-metal hydride batteries were investigated at ambient and at different temperatures. Several techniques, such as the galvanostatic charging and discharging, the constant potential discharge, and the potentiodynamic polarization, were applied to characterize these electrochemical properties. The discharge capacity of the LaY₂Ni₉ alloy increases to reach 258 mAh g^?1 after 5 cycles and decreases to 140 mAh g^?1 after 100 cycles then stabilizes around this same value indicating good cycling held. The hydrogen diffusion coefficient D _H in the bulky alloy is estimated to be (1.02?±?0.11)?×?10^?11 cm² s^?1 correlated with the good stability of electrochemical capacity after 100 cycles. The evolution of the ratio \( \frac{D_{\mathrm{H}}}{a^2} \) and the corrosion current density and potential are correlated with the evolution of the electrochemical capacity during the activation and for a long cycling. The enthalpy, the entropy, and the apparent activation energy of the LaY₂Ni₉ hydride formation are evaluated. The calculated results show that the enthalpy change, the entropy change, and the activation energy are (?42.64?±?1.08), (56.85?±?2.11), and (14.84?±?0.35)?kJ mol^?1, respectively.     

Intensified electrochemical hydrogen storage capacity of multi-walled carbon nanotubes supported with Ni nanoparticles

The electrochemical hydrogen storage properties of Ni-supported multi-walled carbon nanotube (Ni/MWCNT) electrodes were investigated using charge/discharge (C&D) and cyclic voltammetry (CV) techniques. Nickel NPs were deposited on the MWCNT surface, which was first chemically oxidized by H₂SO₄ and HNO₃ (3:1, v/v). Hydrogen storage was carried out by using the Ni/MWCNT electrode as the working electrode in the electrochemical cell. A set of various current densities were applied to the cell to produce (C&D) cycles, and it became optimum corresponding to 1.5 mA current. According to the electrochemical test results, the highest electrochemical discharge capacity of 1625 mAh g^?1 was obtained for the electrode with ratio of 4:1 (MWCNTs to Ni) in the initial cycle, which corresponded to 6.07 wt% H₂. The storage capacity was increased and reached to 4909 mAh g^?1 (18.34 wt% H₂) after 20 cycles, and the electrode maintained the specific capacity as cycling continued. Thus, the Ni/MWCNT electrode displays an excellent cycle stability and a high capacity reversibility. CV measurements also showed that the electrochemical adsorption and desorption amount of hydrogen was increased by Ni loading onto the CNTs and indicated that the electrochemical hydrogen adsorption of the electrode has an activated period.     

Mn<Subscript>3</Subscript>O<Subscript>4</Subscript>/carbon nanotubes nanocomposites as improved anode materials for lithium-ion batteries

Mn₃O₄ and Mn₃O₄ (140)/CNTs have been investigated as high-capacity anode materials for lithium-ion batteries (LIBs) applications. Nanoparticle Mn₃O₄ samples were synthesized by hydrothermal method using Mn(Ac)₂ and NH₃·H₂O as the raw materials and characterized by XRD, TG, EA, TEM, and SEM. Its electrochemical performances, as anode materials, were evaluated by galvanostatic discharge-charge tests. The Mn₃O₄ (140)/CNTs displays outstanding electrochemical performances, such as high initial capacity (1942 mAh g^?1), stable cycling performance (1088 mAh g^?1 and coulombic efficiency remain at 97% after 60 cycles) and great rate performance (recover 823 mAh g^?1 when return to initial current density after 44 cycles). Compared to pure Mn₃O₄ (140), the improving electrochemical performances can be attributed to the existence of very conductive CNTs. The Mn₃O₄ (140)/CNTs with excellent electrochemical properties might find applications as highly effective materials in electromagnetism, catalysis, microelectronic devices, etc. The process should also offer an effective and facile method to fabricate many other nanosized metallic oxide/CNTs nanocomposites for low-cost, high-capacity, and environmentally benign materials for LIBs.     

Optical,electrical, and electrochemical behavior of p-type nanostructured SnO<Subscript>2</Subscript>:Ni (NTO) thin films

The physical and electrochemical properties of sol-gel synthesized nickel-doped tin oxide (NTO) thin films were investigated. The X-ray diffraction results showed that NTO samples exhibited a tetragonal structure. The average crystallite size and the unit cell volume of the films were reduced by Ni increment, while the stacking fault probability was increased. Furthermore, the field-emission scanning electron microscopy images clearly displayed that the worm-like surface morphology of the SnO₂ thin films was altered to the spherical feature in 3 and 10 mol% NTO samples. Moreover, by virtue of Ni incorporation, the average transparency of the SnO₂ thin films rose up from 67 to 85% in the visible region; also, the optical band gap of the SnO₂ sample (3.97 eV) increased and the thin film with 3 mol% dopant concentration showed a maximum value of 4.22 eV. The blue/green emission intensities of photoluminescence spectra of SnO₂ thin film changed via Ni doping. The Hall effect measurements revealed that by Ni addition, the electrical conductivity of tin oxide thin films altered from n- to p-type and the carrier concentration of the films decreased due to the role of Ni²⁺ ions which act as electron acceptors in NTO films. In contrast, 20 mol% Ni-doped sample had the highest mobility about 9.65 cm² (V s)^?1. In addition, the cyclic voltammogram of NTO thin films in KOH electrolyte indicated the charge storage capacity and the surface total charge density of SnO₂ thin films enhanced via Ni doping. Moreover, the diffusion constant of the samples increased from 2?×?10^?15 to 6.5?×?10^?15 cm² s^?1 for undoped and 5 mol% dopant concentration. The electrochemical impedance spectroscopy of the NTO thin films in two different potentials showed the different electrochemical behaviors of n- and p-type thin films. It revealed that the 20 mol% NTO thin film had maximum charge transfer at lower applied potential.     

Capacity of graphene anode in ionic liquid electrolyte

The graphene anode was investigated in an ionic liquid electrolyte (0.7 M lithium bis(trifluoromethanesulfonyl)imide (LiNTf₂)) in room temperature ionic liquid (N-methyl-N-propylpyrrolidinium bis(trifluoromethanesulfonyl)imide (MPPyrNTf₂)). SEM and TEM images suggested that the electrochemical intercalation/deintercalation process in the ionic liquid electrolyte without vinylene carbonate (VC) leads to small changes on the surface of graphene particles. However, a similar process in the presence of VC results in the formation of a coating (SEI—solid electrolyte interface) on the graphene surface. During charging/discharging tests, the graphene electrode working together with the 0.7 M LiNTf₂ in MPPyrNTf₂ electrolyte lost its capacity, during cycling and stabilizes at ca. 200 mAh g^?1 after 20 cycles. The addition of VC to the electrolyte (0.7 M LiNTf₂ in MPPyrNTf₂?+?10 wt.% VC) considerably increases the anode capacity. Electrodes were tested at different current regimes: ranging between 50 and 1,000 mA g^?1. The capacity of the anode, working at a low current regime of 50 mA g^?1, was ca. 1,250 mAh g^?1, while the current of 500 mA g^?1 resulted in capacity of 350 mAh g^?1. Coulombic efficiency was stable and close to 95 % during ca. 250 cycles. The exchange current density, obtained from impedance spectroscopy, was 1.3?×?10^?7 A cm^?2 (at 298 K). The effect of the anode capacity decrease with increasing current rate was interpreted as the result of kinetic limits of the electrode operation.     

Enhancing effect of boron trifluoride diethyl etherate electrolytes on capacitance performance of electropolymerized poly[poly(<Emphasis Type="Italic">N</Emphasis>-vinyl-carbazole)] films

In this paper, poly[poly(N-vinyl-carbazole)] (PPVK) films electrodeposited in tetrahydrofuran (THF) containing 12 % boron trifluoride diethyl etherate (BFEE) were studied as electrode active material for supercapacitors. The morphology and thermal property were characterized by SEM, atomic force microscopy (AFM), and thermogravimetry (TG), respectively. The electrochemical capacitive behaviors of the PPVK films were also investigated by cyclic voltammetry, galvanostatic charge/discharge, and electrochemical impedance spectroscopy. The electrochemical results showed that the specific capacitance of PPVK films in CH₃CN solution was about 126 mF cm^?2 at 1.5 mA cm^?2 and the capacitance retention was only 14.4 % after 1000 cycles. It was exciting to improve the specific capacitance up to 169.3 mF cm^?2 at 1.5 mA cm^?2 and to make the cyclic stability increase to 81.8 % capacitance retention after 5000 cycles when the equivalent BFEE was added into the CH₃CN solution containing 0.05 M Bu₄NBF₄ electrolyte. These results clearly demonstrated that BFEE was an efficient promoter for the enhancement of the capacitance performance of PPVK films. Therefore, with the help of BFEE electrolyte, the PPVK films have potential application as capacitive materials in high-performance energy storage devices.