Fabrication of vesicular polyaniline using hard templates and composites with graphene for supercapacitor

Vesicular polyaniline (VPANI) has been fabricated for the first time via a facile two-step method, which uses high-quality multilamellar vesicular SiO₂ as hard templates. The graphene-wrapped VPANI (VPANI@RGO) composites were prepared by self-assembling graphene oxide onto VPANI and subsequently conducting the hydrothermal reduction process. The morphological characterization of the composites confirms the uniform wrapping of the graphene sheets on the VPANI. The structural characterization of the composites reveals a strong π–π electron and hydrogen bond interaction in the composites. The VPANI@RGO composites exhibit an excellent supercapacitor performance with an enhanced specific capacitance (573 F g^?1) and a good cycling stability, which maintains its capacity of up to 85.7 % over 1000 cycles at 1 A g^?1.     

石墨烯/还原氧化石墨烯/聚苯胺复合材料的制备及在超级电容器中的应用

本研究以低成本、易规模化的亲水性石墨烯/氧化石墨烯为前驱体,通过原位聚合的方法制备石墨烯/氧化石墨烯/聚苯胺复合材料,经过化学还原后制备得到石墨烯/还原氧化石墨烯/聚苯胺复合材料.采用扫描电子显微镜(SEM)、透射电子显微镜(TEM)和傅里叶红外变化光谱仪(FT-IR)对制备的材料进行了结构和形貌的表征.运用循环伏安法...     

Carbon fiber-bridged polyaniline/graphene paper electrode for a highly foldable all-solid-state supercapacitor

Journal of Solid State Electrochemistry - A simple, scalable approach is developed to fabricate a flexible hybrid paper electrode composed of the polyaniline/graphene and the carbon fiber...     

A flexible solid-state supercapacitor based on graphene/polyaniline paper electrodes

The direct coating of graphene sheets obtained by electrochemical exfoliation on commercial paper renders the preparation of highly conductive flexible paper substrate for subsequent deposition of polyaniline(PANi) nanorods via electrochemical polymerization. The deposition of PANi can be well-controlled by adjusting the electrochemical polymerization time, leading to the formation of PANi coated graphene paper(PANi-GP). The as-prepared electrode exhibited high areal capacitance of 176 mF cm~(-2) in threeelectrode system at a current density of 0.2 mA cm~(-2), which is around 10 times larger than that of pristine graphene paper due to the pseudocapacitive behavior of PANi. In-situ Raman test was used to determine the molecular changes during redox process of PANi. More importantly, all-solid-state symmetric capacitor assembled with two PANi-GP electrodes in a polymer electrolyte delivered an areal capacitance of 123 mF cm~(-2), corresponding to an areal energy density of 17.1 μWh cm~(-2) and an areal power density of 0.25 m W cm~(-2). The symmetric capacitor held a capacitive retention of 74.8% after 500 bending tests from 0 to 120°, suggesting the good flexibility and mechanical stability. These results showed the great promising application in flexible energy-storage devices.     

Transition metal ions-doped polyaniline/graphene oxide nanostructure as high performance electrode for supercapacitor applications

Journal of Solid State Electrochemistry - Polyaniline/graphene oxide (PANI/GO) co-doped with Zn2+ and Fe3+ was synthesized via a simple and low cost one-step chronoamperometry method on stainless...     

Fabrication of novel solid-state supercapacitor using a Nafion polymer membrane with graphene oxide/multiwalled carbon nanotube/polyaniline

In the current work, the effect of aniline concentration on the polymerization process and supercapacitive behavior of graphene oxide/multiwalled carbon nanotubes/polyaniline (GMP) nanocomposites were studied. Based on the obtained results, GMP nanocomposite with 0.5 M aniline (GMP5) was selected as the optimum concentration in terms of high current density and high specific capacitance. Nafion-based ionic polymer-free metal composite (IPFMC) supercapacitor was fabricated for the GMP5 nanocomposite. Solid-state symmetric supercapacitor was made after spraying of GMP5 in. on both sides of Nafion membrane. The electrochemical properties were investigated by cyclic voltammetry (CV), galvanostatic charge–discharge (CD), and electrochemical impedance spectroscopy (EIS) techniques in 0.5 M Na₂SO₄.The specific capacitance of 383.25 F g^?1 (326 mF cm^?2) and 527.5 F g^?1 (42 mF cm^?2) was obtained for the GMP5 in solid-state supercapacitor and three-electrode cell at a scan rate of 10 mV s^?1, respectively. The maximum energy and power densities of 53.64 and 1777.4 W kg^?1 were obtained for the IPFMC-based supercapacitor.

Open image in new window

Graphical abstract Schematic of the solid-state supercapacitor based on the GMP5 nanocomposite

     

Poypyrrole/molybdenum trioxide/graphene nanoribbon ternary nanocomposite with enhanced capacitive performance as an electrode for supercapacitor

A polypyrrole/molybdenum trioxide/graphene nanoribbon (PPy/MoO₃/GNR) ternary nanocomposite was successfully synthesized via an in situ method. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analyses show that MoO₃ was successfully combined with the GNRs. The one-dimensional morphology was observed using field emission scanning electron microscopy and transmission electron microscopy. The electrochemical tests show that the PPy/MoO₃/GNR ternary nanocomposite exhibits the highest specific capacitance (844 F g^?1) among the investigated materials and exhibits good cycling stability for 1000 cycles. These results collectively demonstrate that the combination of each component can efficiently increase the specific capacitance and cycling stability. As such, the method reported herein represents a promising approach for fabricating supercapacitor electrode materials.     

High-performance supercapacitor based on ultralight and elastic three-dimensional carbon foam/reduced graphene/polyaniline nanocomposites

A novel supercapacitor based on ultralight and elastic three-dimensional porous melamine foam-derived macroporous carbon/reduced graphene oxide/polyaniline nanocomposites were fabricated, which showed great electrical performance and cycle performance.     

Hybrid material of polyaniline incorporated industrial waste of fly ash to enhance the electrode performance of polyaniline in supercapacitor application

Journal of Solid State Electrochemistry - The existing high market potential for supercapacitors in electric vehicles created enthusiasm for the development of safer and high-performance...     

A novel polyaniline/mesoporous carbon nano-composite electrode for asymmetric supercapacitor

<正>A novel nano-composite of polyaniline/mesoporous carbon(PANI/CMK-3) was prepared with mesoporous carbon(CMK-3) serving as the support.Electrochemical asymmetric capacitors have been successfully designed by using PANI/CMK-3 composite and CMK-3 as positive and negative electrode,respectively.The results showed that the discharge capacity of the asymmetric capacitor could reach 87.4 F/g under the current density of 5 mA/cm~2 and cell voltage of 1.4 V.The energy density of the asymmetric capacitor was up to 23.8 Wh/kg with a power density of 206 W/kg.Furthermore,PANI/CMK-3-CMK-3 asymmetric capacitor using this PANI/CMK-3 nano-composite could be activated quickly and possess high charge-discharge efficiency.     

Electrochemical capacitance performance of polyaniline/tin oxide nanorod array for supercapacitor

Journal of Solid State Electrochemistry - A binary nanocomposite of polyaniline/tin oxide nanorod array (PANI/SnO2 NRA) was developed as an electrode material for energy storage. SnO2 NRA supported...     

MnO2/polyaniline hybrid nanostructures on carbon cloth for supercapacitor electrodes

Journal of Solid State Electrochemistry - A facile two-step strategy is developed for synthesis of MnO2/polyaniline (PANI) hybrid nanostructures on carbon cloth (CC). Vertically aligned PANI...     

Effect of thickness on the capacitive behavior and stability of ultrathin polyaniline for high speed super capacitors

In this work four polyaniline (PANI) film electrode with different thickness were synthesized by electrochemical method on the surface of glassy carbon (GC) electrode. Four polymer films with various thicknesses from 0.5 to 11 μm were synthesized. Electropolymerization occurs in low monomer concentration. Morphology study of electrode shows that surface structure of polymers depends on film thickness. Capacitance of electrode was studied by CV and charge-discharge (CD) methods. Specific capacitance (SC) of electrodes using cyclic voltammetry were calculated 620, 247 F g^–1 for thinnest and thickest polymer film, respectively. Stability of electrodes was studied during 1000 voltammogram cycles. Results show that with the increase of thickness the stability of electrodes enhanced and reach to a maximum and then decreased.     

A renewable bamboo carbon/polyaniline composite for a high-performance supercapacitor electrode material

A high-performance conducting polymer-activated carbon composite electrode material was prepared by potentiostatic deposition of aniline on a hierarchically porous carbon, which was carbonized from the natural bamboo. The obtained composite combined the contribution of the unique properties of the activated carbon and pseudocapacitance of the deposited polyaniline layer. This active material possessed excellent rate capability and good cycle performance, over 92% of the original capacitance is retained after 1,000 cycles. The energy density of the composite can reach 47.5 W h kg⁻¹ calculated only by active mass. It can be a good candidate for high-performance supercapacitor.     

CeO2 nanoparticles/graphene nanocomposite-based high performance supercapacitor

CeO(2) nanoparticles/graphene nanocomposite is fabricated by depositing CeO(2) nanoparticles onto three-dimensional graphene material and its supercapacitor performance is further investigated. The nanocomposite shows a high specific capacitance and power density, demonstrating a strong synergistic effect possibly contributed from improved conductivity of CeO(2) and better utilization of graphene.     

Physicochemical properties and supercapacitor behavior of electrochemically synthesized few layered graphene nanosheets

Journal of Solid State Electrochemistry - The study emphasizes on the scalable production and comparison of few layered graphene nanosheets (FLGNSs). The FLGNSs have been electrochemically...     

One-step electrochemical synthesis of MoS2/graphene composite for supercapacitor application

Journal of Solid State Electrochemistry - In this study, an MoS2/graphene composite is fabricated from bulk MoS2 and graphite rod via a facile electrochemical exfoliation method. The as-prepared...     

Synthesis of ternary polypyrrole/Ag nanoparticle/graphene nanocomposites for symmetric supercapacitor devices

In this study, novel ternary synthesis of reduced graphene oxide (rGO) sheets via intercalation of Ag nanoparticles (Ag) and polypyrrole (PPy) was obtained for supercapacitor evaluations. The synthesis procedure of nanocomposite is simple, cheap, and ecologically friendly. The nanocomposites were analyzed by Fourier transform infrared-attenuated transmission reflectance (FTIR-ATR) and scanning electron microscopy-energy dispersion X-ray analysis (SEM-EDX). In addition, electrochemical performances of electrode active materials (rGO/Ag/PPy) of the samples were tested by means of galvanostatic charge/discharge (GCD), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The highest specific capacitance and energy density of rGO/Ag/PPy nanocomposite were obtained as C_sp = 1085.22 F/g and E = 36.92 Wh/kg for [rGO]_o/[Py]_o = 1/5 at 4 mV/s in 1 M H₂SO₄ solution. Under the optimized preparation conditions in different initial feed ratios ([rGO]_o/[Py]_o = 1/1, ½, 1/5, and 1/10) of rGO/Ag/PPy, nanocomposites acquired a high Coulombic efficiency, and a retention of 66% of its initial capacitance for [rGO]_o/[Py]_o = 1/10 after 1000 cycles. GCD and EIS measurements of rGO/Ag/PPy nanocomposite electrode active material allowed for supercapacitor applications.     

Plasma-based preparation of polyaniline/graphene and polypyrrole/graphene composites for dye-sensitized solar cells as counter electrodes

This study presents the preparation of graphene (GR) nanocomposites with polyaniline (PANI) and polypyrrole (PPy) through the fast, versatile and environmentally friendly process of radio frequency (RF)-plasma polymerization. Morphological characterization of the nanocomposites is performed using scanning electron microscopy (SEM) and shows that the PANI and PPy conducting polymers coated the GR surface. The surface properties of the GR nanocomposites are determined using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD). The prepared GR nanocomposites are then used as counter electrodes in dye-sensitized solar cells (DSSCs). The conversion cell efficiencies for iodine-doped DSSC samples are found to be 0.086%, 5.41%, and 5.60% for I₂-PANI, I₂-PANI-GR and I₂-PPy-GR, respectively, while the corresponding undoped samples reaches power conversion efficiencies of 3.82%, 1.30%, and 0.077% for PPy-GR, PANI-GR and PANI, respectively. The incident photon-to-current efficiency (IPCE) of iodine-doped composite-based DSSCs is significantly enhanced.