Structural phase transitions in BaV6O11

BaV₆O₁₁ was synthesized under high pressures and crystallizes in a structure closely related to magnetoplumbite. [V(1)O₆]-octahedra share common edges and form a Kagomé lattice normal to the hexagonal [0 0 1] direction. The layers are connected in the direction of c via trigonal [V(3)O₅]-bipyramids and [V(2)O₆]-octahedra, which share common faces. The Ba-atoms are incorporated into cavities of the vanadium oxide framework and are coordinated by 12 oxygen atoms in the shape of a dodecahedron.Three magnetic anomalies at approximately 250, 115 and 75 K were detected in this compound. All of them are accompanied by anomalies in the specific heat measurement. To characterize possible structural transitions and determine the response of the structure to the magnetic anomalies, single crystal X-ray diffraction studies were carried out in the temperature range from 293 to 80 K. At 250 K the compound undergoes a structural phase transition. The space group above the transition temperature is P6₃/mmc, at lower temperature the symmetry reduces to P6₃mc. For the refinements in P6₃mc an inversion twin model was used, this way accounting for the loss of the center of symmetry. The structural phase transition is characterized by a small displacement of the V(1)-atom (forming the Kagomé lattice) out of its central position in the octahedra. As a consequence part of the octahedral edges/angles are increased, while the opposite ones are decreased. One limiting surface of the octahedral sheet is corrugated, while the other one is smoothened with respect to the high-temperature structure. This deformation of the octahedral sheets leads to the corresponding geometrical changes in the other coordination polyhedra.The structural response to the magnetic anomaly at 115 K is weak and mainly observable in the geometric parameters concerning the [V(1)O₆]-octahedra and [V(3)O₅]-bipyramids. This may serve as a first indication that the corresponding central atoms play an important role in the mechanism of the magnetic phase transition.     

Heat capacity and thermodynamic functions of MnBr2 · 4H2O and MnCl2 · 4H2O

The heat capacities of MnBr₂ · 4H₂O and MnCl₂ · 4H₂O have been experimentally determined from 10 to 300 K. The smoothed heat capacity and the thermodynamic functions (H°_TH°₀) andS°_T are reported for the two compounds over the temperature range 10 to 300 K. The error in these data is thought to be less than 1%. A subtle heat capacity anomaly was observed in MnCl₂ · 4H₂O over the temperature range 52 to 90 K. The entropy associated with the anomaly is of the order 0.4 J/mole K.     

Heat capacity and thermodynamic functions of MnBr2 · 4D2O and MnCl2 · 4D2O

The heat capacities of MnBr₂ · 4D₂O and MnCl₂ · 4D₂O have been experimentally determined from 1.4 to 300 K. The smoothed heat capacity and thermodynamic functions (H°_TH°₀) and S°_T are reported for the two compounds over the temperature range 10 to 300 K. The error in the thermodynamic functions at 10 K is estimated to be 3%. Additional error in the tabulated values arising from the heat capacity data above 10 K is thought to be less than 1%. A λ-shaped heat capacity anomaly was observed for MnCl₂ · 4D₂O at 48 K. The entropy associated with the anomaly is 1.2 ± 0.2 J/mole K.     

Heat capacity and thermodynamic functions of ferrocenemethanol

The heat capacity (C _{p, m}) of ferrocenemethanol (FM) C₅H₅FeC₅H₄CH₂OH have been measured by the low-temperature adiabatic calorimetry method in the range 6–371 K. The triple point temperature, the enthalpy of fusion, and the purity of the substance under consideration have been determined. The ideal gas thermodynamic functions of FM—absolute entropy S _m(g) ⁰ and change in the enthalpy Δ ₀ ^T H _m at 298.15 K—have been derived from the heat capacity data and the known values of the saturation vapor pressure and enthalpy of sublimation. The ideal gas thermodynamic functions C _{p, m} ⁰ and S _m(g) ⁰ and the enthalpy of formation of FM have been calculated by the empirical difference method at T = 298.15 K. The experimental and calculated values of the thermodynamic functions are consistent within error limits, which proves their reliability.     

Heat capacity and thermodynamic properties of crystalline ornidazole (C7H10ClN3O3)

The molar heat capacities of 1-(2-hydroxy-3-chloropropyl)-2-methyl-5-nitroimidazole (Ornidazole) (C₇H₁₀ClN₃O₃) with purity of 99.72 mol% were measured with an adiabatic calorimeter in the temperature range between 79 and 380 K. The melting-point temperature, molar enthalpy, Δ_fusH_m, and entropy, Δ_fusS_m, of fusion of this compound were determined to be 358.59±0.04 K, 21.38±0.02 kJ mol⁻¹ and 59.61±0.05 J K⁻¹ mol⁻¹, respectively, from fractional melting experiments. The thermodynamic function data relative to the reference temperature (298.15 K) were calculated based on the heat capacities measurements in the temperature range from 80 to 380 K. The thermal stability of the compound was further investigated by DSC and TG. From the DSC curve an intensive exothermic peak assigned to the thermal decomposition of the compound was observed in the range of 445-590 K with the peak temperature of 505 K. Subsequently, a slow exothermic effect appears when the temperature is higher than 590 K, which is probably due to the further decomposition of the compound. The TG curve indicates the mass loss of the sample starts at about 440 K, which corresponds to the decomposition of the sample.     

Heat capacity and thermodynamic functions of cadmium fluoride

Adiabatic calorimetry was used to measure heat capacities of cadmium fluoride in the range 5–340 K. Spline smoothing of the heat capacity versus temperature data allowed thermodynamic functions to be calculated within the range of the measurement temperatures. The thermal behavior of CdF₂ was studied and showed no phase transitions within 300–723 K.     

Heat capacity and thermodynamic functions of LuPO4 in the range 0-320 K

The heat capacity of LuPO₄ was measured in the temperature range 6.51-318.03 K. Smoothed experimental values of the heat capacity were used to calculate the entropy, enthalpy and Gibbs free energy from 0 to 320 K. Under standard conditions these thermodynamic values are: (298.15 K) = 100.0 ± 0.1 J K⁻¹ mol⁻¹, S⁰(298.15 K) = 99.74 ± 0.32 J K⁻¹ mol⁻¹, H⁰(298.15 K) − H⁰(0) = 16.43 ± 0.02 kJ mol⁻¹, −[G⁰(298.15 K) − H⁰(0)]/T = 44.62 ± 0.33 J K⁻¹ mol⁻¹. The standard Gibbs free energy of formation of LuPO₄ from elements Δ_fG⁰(298.15 K) = −1835.4 ± 4.2 kJ mol⁻¹ was calculated based on obtained and literature data.     

Pressure-induced phase transitions in Al2(WO4)3

The high pressure behavior of aluminum tungstate [Al₂(WO₄)₃] has been investigated up to ∼18 GPa with the help of Raman scattering studies. Our results confirm the recent observations of two reversible phase transitions below 3 GPa. In addition, we find that this compound undergoes two more phase transitions at ∼5.3 and ∼6 GPa before transforming irreversibly to an amorphous phase at ∼14 GPa.     

NMR study of the order-disorder phase transitions of KHCO3 and KDCO3 single crystals

KHCO₃ and its deuterated analogue KDCO₃ are typical materials that undergo order-disorder phase transitions at 318 and 353 K, respectively. The spin-lattice relaxation times, T₁, spin-spin relaxation times, T₂, and the number of resonance lines for the ¹H, ²D, and ³⁹K nuclei of these crystals were investigated using NMR spectrometer. These materials are known to exhibit anomalous decreases in T₁ near T_C, which have been attributed to a structural phase transition. Additionally, changes in the symmetry of the (HCO₃)₂²⁻ (or (DCO₃)₂²⁻) dimers in these materials are associated with large changes in T₁, T₂, and the number of resonance lines. Here we found that the resonance lines for ¹H, ²D, and ³⁹K nuclei decrease in number as the temperature is increased up to T_C, indicating that the orientations of the (HCO₃)₂²⁻ (or (DCO₃)₂²⁻) dimers and the environments of the K ions change at T_C. Moreover, based on number of resonance lines, the results further indicate that the (HCO₃)₂²⁻ (or (DCO₃)₂²⁻) dimers reorientate to approximately parallel to the directions of the hydrogen bonds (or deuteron bonds) and the direction of the a-axis. The transitions at 318 and 345 K of the two crystals are of the order-disorder type. The present results therefore indicate that the orientations of the (HCO₃)₂²⁻ and (DCO₃)₂²⁻ dimers and the environment of the K ion play a significant role in these phase transitions.     

Crystal structure and phase transitions in perovskite-like C(NH2)3SnCl3

X-ray single-crystal diffraction, high-temperature powder diffraction and differential thermal analysis at ambient and high pressure have been employed to study the crystal structure and phase transitions of guanidinium trichlorostannate, C(NH₂)₃SnCl₃. At 295 K the crystal structure is orthorhombic, space group Pbca, Z=8, a=7.7506(2) Å, b=12.0958(4) Å and c=17.8049(6) Å, solved from single-crystal data. It is perovskite-like with distorted corner-linked SnCl₆ octahedra and with ordered guanidinium cations in the distorted cuboctahedral voids. At 400 K the structure shows a first-order order-disorder phase transition. The space group is changed to Pnma with Z=4, a=12.1552(2) Å, b=8.8590(2) Å and c=8.0175(1) Å, solved from powder diffraction data and showing disordering of the guanidinium cations. At 419 K, the structure shows yet another first-order order-disorder transformation with disordering of the SnCl₃⁻ part. The space group symmetry is maintained as Pnma, with a=12.1786(2) Å, b=8.8642(2) Å and c=8.0821(2) Å. The thermodynamic parameters of these transitions and the p-T phase diagram have been determined and described.     

Heat capacity and characteristic thermodynamic functions of dysprosium boride DyB62 in the temperature range of 2 to 300 K

Heat capacity at constant pressure C _p (T) of a dysprosium boride DyB₆₂ single crystal obtained by zone melting was studied experimentally in the temperature range of 2 to 300 K. Abnormally high values of dysprosium boride heat capacity were revealed in the range of 2–20 K, due to the magnetic contribution and the effect of disorder in the boride lattice. Temperature changes in DyB₆₂ enthalpy, entropy, Gibbs energy, and standard values of these thermodynamic functions were calculated.     

“Unusual” phase transitions in CeAlO3

High-resolution time-of-flight neutron powder diffraction was carried out to investigate the crystal structures of CeAlO₃ over a wide temperature range between 4.2 and 1423 K. Confirming the recent result of X-ray powder diffraction, the room temperature structure is tetragonal with the space group I4/mcm (tilt system (a⁰a⁰c⁻)). The tetragonal structure persists down to 4.2 K. However, above room temperature CeAlO₃ undergoes three phase transitions: first to the orthorhombic Imma structure (tilt system (a⁰b⁻b⁻)) at, e.g., 373 K, then to the rhombohedral structure (tilt system (a⁻a⁻a⁻)) at, e.g., 473 K, and finally, to the primitive cubic structure which exists above 1373 K. The sequence of phases, , which occurs in CeAlO₃ is a rare one in oxide perovskites.     

Structural and electronic phase transitions in Sr1−xCexMnO3 perovskites

The structures of eight members of the series Sr_1−xCe_xMnO₃ with 0.075?x?0.4 have been established using synchrotron X-ray powder diffraction. These exhibit the sequence of structures

     

Crystal data and phase transitions of KLiWO4 and KLiMoO4

Crystal data and phase transitions of KLiWO₄ and KLiMoO₄ were investigated using a high-temperature X-ray powder diffractometer. Phase transitions were observed at 350°C for KLiWO₄ and at 360°C for KLiMoO₄. It was found that the room temperature phases were isostructural with stuffed derivatives of tridymite and the high-temperature phases were isostructural with stuffed derivatives of cristobalite.     

Structural phase transitions in the relaxor ferroelectric Pb2Bi4Ti5O18

The relaxor ferroelectric Pb₂Bi₄Ti₅O₁₈ has been studied by Rietveld refinement of powder neutron diffraction data collected at temperatures of 100, 250 and 400 °C. Our refinements are compatible with the ‘average’ crystal structure of Pb₂Bi₄Ti₅O₁₈ undergoing the phase transition sequence F2mm→I4mm→I4/mmm as a function of increasing temperature, with the latter phase being observed above the known ferroelectric Curie temperature, T_m, and the intermediate phase consistent with a previously observed dielectric anomaly around 207 °C. The results are, however, in conflict with both observation of a symmetry lowering (to space group B2eb) in the lowest temperature phase, observed by electron diffraction, and also with electrical property measurements, which suggest both a- and c-axis polarisation up to T_m. Nevertheless, these crystallographic results are consistent with the observation of relaxor behaviour in this material, and underline the importance of considering ‘long-range’ versus ‘local’ structural effects in relaxor materials.     

Heat capacity of MnAs0.88P0.12 from 10 to 500 K: Thermodynamic properties and transitions

The heat capacity of MnAs_0.88P_0.12 has been measured by adiabatic shield calorimetry from 10 to 500 K. It is shown that very small energy changes are connected with two magnetic order-order transitions, indicating that these can be regarded as mainly “noncoupled” magnetic transitions. At higher temperatures contributions to the excess heat capacity arises from a magnetic order-disorder transition, a conversion from low- to high-spin state for manganese, and a MnP- to NiAs-type structural transition. The observed heat capacity is resolved into contributions from the different physical phenomena, and the character of the transitions is discussed. In particular it is substantiated that the dilational contribution, which includes magnetoelastic and magnetovolume terms as well as normal anharmonicity terms, plays a major role in MnAs_0.88P_0.12. The entropy of the magnetic order-disorder transition is smaller than should be expected from a complete randomization of the spins, assuming a purely magnetic transition. Thermodynamic functions have been evaluated and the respective values of C_p, {S^O_m(T) - S^O_m(0)}, and -{G^O_m(T) - H^O_m(0)}/T at 298.15 K are 68.74, 72.09, and 32.30 J K⁻¹ mole⁻¹, and at 500 K 56.05, 108.12, and 56.64 J K⁻¹ mole⁻¹.     

Structural studies of the disorder and phase transitions in the double perovskite Sr2YTaO6

The evolution of the crystal structure of the double perovskite Sr₂YTaO₆ from room temperature to 1250 °C has been studied using powder neutron and synchrotron X-ray diffraction. At room temperature Sr₂YTaO₆ crystallises in a monoclinic superstructure with the space group P2₁/n. The tilting of the octahedra evident in the room temperature structure is progressively lost on heating, resulting in a sequence of phase transitions that ultimately yields the cubic structure in space group Fm3?m. The high temperature tetragonal and cubic phases are characterised by strongly anisotropic displacements of the anions. The amount of defects in the crystal structure of Sr₂YTaO₆ is found to be sensitive to the preparative method.     

Crystal structures and phase transitions of Sr2CrSbO6

Sr₂CrSbO₆ was synthesized by the conventional solid-state reaction process. X-ray powder diffraction (XRPD) and neutron powder diffraction (NPD) has been used to reinvestigate the structure at room temperature and to study the phase transitions at high- and low-temperature. Rietveld analysis revealed that Sr₂CrSbO₆ crystallizes at room temperature in a monoclinic system having a space group I2/m, with a=5.5574(1) Å; b=5.5782(1) Å; c=7.8506(2) Å and β=90.06(2), no P2₁/n space group as was previously reported. The high-temperature study (300-870 K) has shown that the compound presents the following temperature induced phase-transition sequence: I2/m-I4/m-Fm-3m. The low-temperature study (100-300 K) demonstrated that the room-temperature I2/m monoclinic symmetry seems to be stable down to 100 K.     

Structural phase transitions in Zn(CN)2 under high pressures

High pressure behavior of zinc cyanide (Zn(CN)₂) has been investigated with the help of synchrotron-based X-ray diffraction measurements. Our studies reveal that under pressure this compound undergoes phase transformations and the structures of the new phases depend on whether the pressure is hydrostatic or not. Under hydrostatic conditions, Zn(CN)₂ transforms from cubic to orthorhombic to cubic-II to amorphous phases. In contrast, the non-hydrostatic pressure conditions drive the ambient cubic phase to a partially disordered crystalline phase, which eventually evolves to a substantially disordered phase. The final disordered phase in the latter case is distinct from the amorphous phase observed under the hydrostatic pressures.