乙酰丙酮铜(Ⅱ)引发淀粉与甲基丙烯酸甲酯接枝共聚合的研究

<正> 淀粉与丙烯酸酯类单体的接枝共聚物有可能作为生物降解塑料,而被应用于农业、医药及食品等各个方面。因此寻求价廉、高效的引发剂,以用于引发淀粉与烯类单体的接枝共聚,已引起了人们的极大兴趣。 过渡金属离子与β二酮的配合物,如乙酰丙酮铁(Ⅲ)、乙酰丙酮锰(Ⅲ)、乙酰丙酮铜(Ⅱ)等是一类引起注目的新型引发剂,已在羊毛、蚕丝、纤维素等天然大分     

过硫酸铵-尿素引发丙烯酸甲酯与明胶接枝共聚

接枝共聚合反应;过硫酸铵-尿素引发丙烯酸甲酯与明胶接枝共聚     

Synthesis and characterization of a novel polymeric hydrogel based on hydroxypropyl methyl cellulose grafted with polyacrylamide

A novel hydrogel has synthesized by grafting polyacrylamide chains onto hydroxypropyl methylcellulose in presence of potassium persulphate as initiator using solution polymerization technique. The reaction was carried out in homogeneous aqueous medium. The effect of reaction parameters on percentage of grafting (% G) and grafting efficiency (% GE) were discussed. The parameters were varied systematically to achieve the best hydrogel. Developed hydrogels were characterized by various materials characterization techniques. The dynamic and equilibrium swelling properties of hydrogels were investigated as a function of pH and time in various buffer solutions similar to that of gastric and intestinal fluid. Results showed that with increase in % G and % GE, the rate of swelling decreases, which can opens the door for further study of their utilization as matrices for controlled/sustained/targeted drug delivery.     

Preparation and characterization of vinyltriethoxysilane grafted ethylene propylene diene terpolymer/linear low density polyethylene (EPDM‐g‐VTES/LLDPE) blends

Graft polymerization of vinyltriethoxysilane (VTES) onto ethylene‐propylene‐diene terpolymer (EPDM) was carried out in toluene using dicumylperoxide (DCP) as initiator. Effects of various parameters (EPDM content, VTES content, reaction time, reaction temperature and initiator concentration) on the grafting efficiency of VTES onto EPDM were investigated. At the optimum grafting efficiency conditions, EPDM‐g‐VTES was developed by melt mixing in a twin screw extruder and then linear (l), statically vulcanized (s) and dynamically vulcanized (d) blends of EPDM‐g‐VTES with linear low‐density polyethylene (LLDPE) with varying percentage compositions were prepared by melt mixing in the twin screw extruder. The grafting of VTES onto EPDM and its crosslinking was confirmed by FT‐IR. The characterization of mechanical properties such as tensile strength, elongation at break, Young's modulus and hardness, differential scanning calorimetry (DSC) analysis and morphology were studied and compared for the EPDM‐g‐VTES/LLDPE blends. The study reveals that the dynamically vulcanized blend improves the mechanical and thermal properties due to the presence of efficient interaction between component polymers when compared with other blends. Copyright © 2005 John Wiley & Sons, Ltd.     

Graft copolymerization of methacrylic acid onto carboxymethyl chitosan

Carboxymethyl chitosan (CMCTS) was prepared and characterized by FTIR, ¹H NMR, and elemental analysis. The graft copolymerization of methacrylic acid (MAA) onto CMCTS using ammonium persulfate (APS) as an initiator was carried out in an aqueous solution. Evidence of grafting was obtained by comparison of FTIR spectra of CMCTS and the grafted copolymer as well as solubility characteristics of the products. The effects of APS, MAA, reaction temperature and time on graft copolymerization were studied by determining the grafting parameters such as grafting percentage and grafting efficiency. With keeping other conditions constant, the optimum conditions were shown as following: [APS]=8 mmol/l, [MAA]=2.4 mol/l, reaction temperature=60-70 °C, reaction time=120 min.     

无规聚丙烯接枝甲基丙烯酸的合成

采用溶液聚合的方法将无规聚丙烯 (APP)与甲基丙烯酸 (MAA)接枝共聚制得接枝共聚物APP -g -MAA。讨论了反应温度、反应时间、引发剂BPO浓度、单体MAA浓度对接枝率的影响。结果表明 :当聚合反应温度低于是 12 0℃时 ,接枝率随温度升高而降低。延长反应时间有利于提高接枝率。最适宜的引发剂浓度为 1% ,MAA/APP配比为 0 .2 5/1。利用红外光谱证实了接枝物APP-g -MAA的存在。     

Grafting of Acrylamide On 1, 1, 2, 2-Tetra-Chloroethane Preswelled Polyethylene Terephthalate) Films Using Azobisisobutyronitrile Initiator

Abstract

Graft polymerization of acrylamide (AAm) on 1, 1, 2, 2 tetrachloro-ethane (TCE) preswelled poly(ethylene terephthalate) (PET) films were performed with chemical initiation method using asobisiso-butyronitrile (AIBN) initiator. Temperature was found to have a greater effect on the swelling then the swelling time. Variation of the graft yield with polymerization temperature, time, AIBN concentration, AAm concentration, AIBN and AAm inclusion times were investigated. The optimum temperature for grafting was found to be 70°CC. The graft yield was observed to increase with polymerization time, AAm concentration, initiator and monomer diffusion time up to a saturation graft yield and then leveled off. An increase in AIBN concentration first enhanced the percent grafting then showed a decrease. The addition of some salts (Ni²⁺, Cr³⁺, Co²⁺, Cu²⁺) on the rate of grafting was also investigated. From the temperature dependence of the initial rate of grafting, the overall activation energy was found to be 4. 1 kcal/mol and relevant rate equation have been derived. The effect of grafting on film propities, such as water absorption capacity, intrinsic viscosity were determined. Grafted films were characterized by FTIR spectros-copy and scanning electron microscopy (SEM).     

Synthesis and characterization of anhydride-functional polycaprolactone

Polycaprolactone-graft-maleic anhydride (PCL-g-MA) copolymer was prepared by grafting maleic anhydride onto PCL in a batch mixer and in an extruder using dicumyl peroxide as the initiator. The graft content was determined with the volumetric method by converting the anhydride functions to acid groups and then titrating with ethanolic potassium hydroxide. The grafted polymer was extracted with xylene to remove any unreacted monomer before the estimation step. The effect of temperature and the various concentrations of the initiator and monomer used for the grafting reaction were investigated. The presence of residual initiator in the reaction product was checked using thin-layer chromatography. Molecular weight determination was carried out for the pure and grafted polymer using gel permeation chromatography to determine if chain scission was present. Results indicate that maleic anhydride is grafted onto PCL using free radical initiators. The grafting reaction was confirmed by FTIR and NMR techniques. FTIR spectra showed absorption bands around 1785 and 1858 cm⁻¹. NMR spectra gave signals for methine proton at 3.47 ppm. For a given peroxide level, a higher temperature or residence (reaction) time gave higher percentage of grafted MA. There was an optimum temperature and initiator concentration after which the percentage of MA grafted on PCL decreased. The number-average molecular weight, tensile strength, and the percent elongation of PCL-g-MA were comparable to those of PCL before grafting. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1139–1148, 1997     

Potassium diperiodatonickelate‐initiated graft copolymerization of methyl acrylate onto organophilic montmorillonite

Using potassium diperiodatonickelate (Ni (IV)) as an efficient initiator, the graft copolymerization of methyl acrylate (MA) onto organophilic montmorillonite (OMMT) was successfully performed in an alkaline medium. Three grafting parameters were systematically evaluated as functions of the temperature, the initiator concentration, reaction time, pH value, and the ratio of MA to OMMT substrate. The structure of the titled graft copolymers (OMMT‐g‐PMA) were confirmed by Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), differential scanning calorimetry (DSC), and thermo‐gravimetric analysis (TGA). It was found that Ni (IV) was a highly efficient initiator for graft copolymerization of the MA onto OMMT, i.e., grafting efficiency is as high as 95% and grafting percentage can be facilely controlled within 700% in this study. In addition, the highest grafting efficiency and grafting percentage were obtained when temperature adopted was over 40°C and pH was about 10.3. A single‐electron‐transfer mechanism was proposed to illustrate the formation of radicals and the initiation reaction. Copyright © 2008 John Wiley & Sons, Ltd.     

Ceric Ion-Initiated Grafting of Poly(Methyl Acrylate) onto Chitin

Abstract

Poly(methy1 acrylate) was grafted onto chitin in an aqueous medium by using the ceric ion as a redox initiator in the presence of 10^?4 M nitric acid and oxygen from the atmosphere. The grafting percentage turned out to be dependent on reaction temperature, time, and initiator concentration, but it was found to be independent of monomer concentration. In the course of the grafting reaction, homopolymerization of methyl acrylate occurs. The percentage of homopolymer was found to depend only on the reaction temperature. The apparent activation energy for the grafting reaction was estimated to be 11 kcal/mol. The grafted chitin is insoluble in solvents for chitin but shows enhanced swelling in some organic solvents.     

铬酸引发丙烯酸正丁酯与淀粉接枝共聚反应

作为淀粉改性方法之一 ,不饱和酸及其酯与淀粉接枝共聚反应是一个较新的研究领域 ,其中以 Ce4 +离子作为引发剂的较多[1,2 ] ,也有用Mn3+-H2 SO4 体系 [3]和 Mn[( H2 P2 O7) 3]3-引发体系的[4 ] 。铬酸是一种具有强氧化性的强酸 ,虽然它单独存在时并不引发乙烯类单体的聚合 ,有报道[5] 铬酸可以引发丙烯腈与苎麻纤维素接枝共聚 ,淀粉和纤维素同属于碳水化合物。本文对铬酸引发丙烯酸正丁酯与淀粉接枝共聚反应进行了研究 ,考察了反应条件对接枝反应的影响。1　实验部分1 .1　原料可溶性淀粉 (北京奥特生物技术责任有限公司 ) ,丙烯酸正丁…     

Modification of deproteinized natural rubber via grafting polymerization with maleic anhydride

Modification of natural rubber (NR) via grafting polymerization with maleic anhydride (MA) has received wide attention as it could improve the hydrophilicity of NR and extend its application to a wider application field. However, the grafting efficiency of MA onto NR in either the molten state or solution state is low and is accompanied with undesired high gel content in the grafts. In this work a novel technical route was developed in that a deproteinization operation was conducted before carrying out the grafting process and a differential microemulsion polymerization technique was applied for the grafting reaction. The effects of initiator and monomer concentration, reaction temperature, and reaction time on the grafting efficiency and gel fraction were investigated, and a comparison of the reaction performance was conducted for deproteinized NR (DPNR) and NR. The results indicated that the deproteinization operation could significantly improve the grafting efficiency and reduce the gel content, and a 29% yield of MA grafted onto the rubber backbone could be achieved at a condition of a DPNR:MA:initiator ratio of 85:9:6 (wt%) at 60 °C for 8 h.     

聚乙烯—丙烯酸与聚（2—乙基—2—恶唑啉）接枝共聚物的合成及表征

选用聚乙烯－丙烯酸（ＥＡＡ）为接枝母体,首先摸索出２－乙基－２－恶唑啉阳离子开环聚合的规律,得到高转化率端基为活性翁离子的聚（２－乙基－２－恶唑啉）（ＰＥＯＸ）,再与ＥＡＡ羟基侧基进行接枝反应,考察了开环聚合条件及接枝反应条件对接枝率的影响,在一定的条件下得到了接枝率〉２５％的聚乙烯－丙烯酸与聚（２－乙基－２－恶唑啉）的接枝共聚物（ＥＡＡ－ｇ－ＰＥＯＸ）。该接枝物用于聚对苯二甲酸丁醇酯／聚丙烯（Ｐ     

聚乙烯丙烯酸与聚(2-乙基-2-噁唑啉)接枝共聚物的合成及表征

选用聚乙烯 丙烯酸 (EAA)为接枝母体 ,首先摸索出 2 乙基 2 唑啉阳离子开环聚合的规律 ,得到高转化率端基为活性离子的聚 ( 2 乙基 2 唑啉 ) (PEOX) ,再与EAA羟基侧基进行接枝反应 ,考察了开环聚合条件及接枝反应条件对接枝率的影响 ,在一定的条件下得到了接枝率 >2 5%的聚乙烯 丙烯酸与聚 ( 2 乙基 2 唑啉 )的接枝共聚物 (EAA g PEOX) .该接枝物用于聚对苯二甲酸丁二醇酯 /聚丙烯 (PBT/PP)共混体系中作相容剂 ,可提高两者的相容性 .     

Graft Copolymerization of Methyl Methacrylate onto Chitosan Initiated by Potassium Ditelluratocuprate(III)

A novel redox system, potassium ditelluratocuprate(III) (DTC)–chitosan, was employed to initiate the graft copolymerization of methyl methacrylate (MMA) onto chitosan in alkali medium. The effects of reaction variables, such as the initiator concentration, ratio of monomer to chitosan, the pH value, as well as reaction temperature and time were investigated, and the grafting conditions were optimized. Graft copolymers with both high grafting efficiency (>90%) and percentage of grafting were obtained, and the rate of polymerization is higher, which indicated that the DTC–chitosan redox system is an efficient initiator for this graft copolymerization. The structures and the thermal property of chitosan and chitosan–g–PMMA were characterized by infrared spectroscopy (IR), X‐ray diffraction and thermogravimetric analysis (TGA). A mechanism is proposed to explain the generation of radicals and the initiation. The graft copolymer was used as the compatibilizer in blends of terpolyamide and chitosan. The scanning electron microscope (SEM) photographs indicated that the graft copolymer improved the compatibility of the blend.     

Grafting onto Wool. IX. Graft Copolymerization of Vinyl Monomers by Use of Vanadium Oxyacetylacetonate as Initiator

Methyl methacrylate (MMA), acrylic acid (AAc), and vinyl acetate (VAc) were graft copolymerized onto Himachali wool in an aqueous medium by using vanadium oxyacetyl acetonate as initiator. Graft copolymerization was studied at 45, 55, 65, and 75°C for various reaction periods. The percentage of grafting was determined as functions of concentration of monomers, concentration of initiator, time, and temperature. The maximum percentage of grafting with each monomer occurred at 55°. Several grafting experiments were carried out in the presence of various additives which include HNO3, DMSO, and pyridine. Nitric acid was found to promote grafting of MMA. All these additives had adverse effects on grafting of VAc and AAc. MMA, VAc, and AAc were found to differ in reactivity toward grafting and followed the order MMA > AAc > VAc.     

含噁唑烷酮基团丙烯酰单体在纤维素纤维表面的接枝反应

饮用水的水质状况与人体健康的关系十分密切,但是当前世界上的清洁水资源越来越紧缺．水的处理和净化成为人类健康的重要保障,研制一种经济、简便、实用的水处理的材料具有巨大社会效益和经济效益．     

纤维素与己内酰胺的接枝共聚反应

以过硫酸铵和过硫酸钾为引发剂,在碱性环境下进行纤维素与己内酰胺的接枝共聚反应.采用红外光谱仪(FT-IR)、扫描电子显微镜(SEM)及X射线衍射仪(XRD)对接枝共聚物的分子结构、表观形貌和结晶性进行了表征.通过单因素实验重点考察了单体用量、引发剂浓度、反应温度和反应时间等对接枝共聚物接枝率的影响.结果表明:以3 g纤...     

Graft-copolymerization of styrene on polypropylene in the solid phase

The graft-copolymerization of styrene on PP in the solid phase has been studied under various reaction conditions using a radical initiator. Polymerization kinetics were investigated by DSC experiments and reactions in glass ampoules. The conversion rate and grafting efficiency of styrene appeared to be strongly influenced by the presence of the PP matrix and the styrene/PP ratio. From reactions in a lab scale reactor the concentrations of styrene and initiator, the dosing rate and the temperature were investigated to be critical parameters determining the grafting efficiency and the average length and number of grafts. The phenomena observed were explained by describing the process in relative rates of diffusion and polymerization, including swelling of the polymer by styrene monomer and diffusion limitations (Trommsdorff effect).     

4-烯丁氧基-2-羟基丙磺酸钠接枝改性聚乙烯醇的研究

以水为溶剂,过硫酸铵(APS)为引发剂,将4-烯丁氧基-2-羟基丙磺酸钠(AGES)与聚乙烯醇(PVA)进行自由基接枝反应,对改性反应生成物进行分离得到了AGES-g-PVA接枝物。对AGES-g-PVA接枝物用IR、XRD、DTA和TG进行了结构表征。结果表明:随着引发剂浓度增大、AGES用量提高、反应时间延长及反应温度的升高,AGES对PVA接枝率增大。