Spectroscopic study of the interaction of actinomycin D with oligonucleotides carrying the central base sequences -XGCY- and -XGGCCY- using multivariate methods

The interactions of actinomycin D (ACTD) with the oligonucleotides 5′-CAAAGCTTTG-3′, 5′-CATGGCCATG-3′ and 5′-TATGGCCATA-3′ were investigated by means of acid–base titrations and mole-ratio and melting experiments monitored by molecular absorption and circular dichroism (CD) spectroscopies. For each experiment, CD and molecular absorption spectra were recorded at each point in the experiment, and later analyzed via appropriate multivariate data analysis methods. The study of the interactions between these oligonucleotides and ACTD at 25 °C showed the formation of an interaction complex with a stoichiometry of 1:1 (ACTD:duplex) and values for the log(formation constant) of 5.1 ± 0.3, 6.4 ± 0.2, and 5.6 ± 0.2, respectively. An additional interaction complex at higher temperatures was also detected, which might be related to the single-stranded forms of the oligonucleotides. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Electrophoresis of colloidal α-alumina

Measurements of the electrophoretic mobility (u _E) of particles of colloidal α-alumina were made as a function of pH, electrolyte concentration and electrolyte type (NaCl, NaNO₃ and KCl) using two similar instrumental techniques. Significant differences (50% or less) in the values of u _E of particles in NaCl were obtained from the two instruments; however, the isoelectric points (IEPs) (the pH at which u _E=0), estimated from the two sets of measurements, occurred at 7.5 ± 0.3 and 7.8 ± 0.05 and were not significantly different. The latter estimate corresponds with those for particles in KCl and NaNO₃ of 8.05 ± 0.11 and 7.95 ± 0.18, respectively, made using the same instrument and indicate that the IEP was a weak function of electrolyte type. When cations acted as counterions (pH > IEP), the absolute magnitudes and the ranges of u _E with electrolyte concentration were found to be significantly less than when anions acted as counterions (IEP > pH). Estimates of the zeta potential (ζ), made using various procedures, showed variations of up to 25% at low ratios of electrical-double-layer thickness (κ ⁻¹) to particle radius (a) (κa∼10) and were of a similar scale to differences in u _E, but no significant variations (95% confidence) in ζ were obtained at high values (κa∼200). Received: 12 July 2000 Accepted: 17 October 2000     

Quantification of luminally released serotonin in rat proximal colon by capillary electrophoresis with laser-induced fluorescence detection

Serotonin (5-hydroxytryptamine, 5-HT) plays vital roles in regulating gastrointestinal functions. Thus, the detection of 5-HT in the gastrointestinal tract is of great importance for biomedical research, medical diagnosis, and pharmaceutical therapy. This paper presents a simple, sensitive, and fast method for the quantification of luminally released serotonin in the feces and tissues of the rat proximal colon by means of capillary electrophoresis with laser-induced fluorescence detection. 5-Carboxyfluorescein N-succinimidyl ester was used for precolumn derivatization of serotonin. The optimal separation and detection conditions were obtained with an electrophoretic buffer containing 60 mM borate (pH 8.90) and an air-cooled argon-ion laser (excitation at 488 nm, emission at 520 nm). The serotonin concentrations in the feces and tissues of proximal colons were analyzed with this method, and the average values of serotonin in the feces samples were 1.951 ± 0.446 ng/mg (male) and 2.095 ± 0.533 ng/mg (female) and 1.397 ± 0.267 ng/mg in rat proximal colon tissues. The results demonstrate that this method can accurately determine luminally released 5-HT in rats.     

Identification and analysis of stereoselective drug interactions with low-density lipoprotein by high-performance affinity chromatography

Columns containing immobilized low-density lipoprotein (LDL) were prepared for the analysis of drug interactions with this agent by high-performance affinity chromatography (HPAC). R/S-Propranolol was used as a model drug for this study. The LDL columns gave reproducible binding to propranolol over 60 h of continuous use in the presence of pH 7.4 0.067 M potassium phosphate buffer. Experiments conducted with this type of column through frontal analysis indicated that two types of interactions were occurring between R-propranolol and LDL, while only a single type of interaction was observed between S-propranolol and LDL. The first type of interaction, which was seen for both enantiomers, involved non-saturable binding; this interaction had an overall affinity (nK _a) of 1.9 (±0.1) × 10⁵ M⁻¹ for R-propranolol and 2.7 (±0.2) × 10⁵ M⁻¹ for S-propranolol at 37 °C. The second type of interaction was observed only for R-propranolol and involved saturable binding that had an association equilibrium constant (K _a) of 5.2 (±2.3) × 10⁵ M⁻¹ at 37 °C. Similar differences in binding behavior were found for the two enantiomers at 20 °C and 27 °C. This is the first known example of stereoselective binding of drugs by LDL or other lipoproteins. This work also illustrates the ability of HPAC to be used as a tool for characterizing mixed-mode interactions that involve LDL and related binding agents.     

Effect of pH and ionic strength on the interaction of humic acid with aluminium oxide

The effect of pH and neutral electrolyte on the interaction between humic acid/humate and γ-AlOOH (boehmite) was investigated. The quantitative characterization of surface charging for both partners was performed by means of potentiometric acid–base titration. The intrinsic equilibrium constants for surface charge formation were logK _a,1 ^int=6.7±0.2 and logK _a,2 ^int = 10.6±0.2 and the point of zero charge was 8.7±0.1 for aluminium oxide. The pH-dependent solubility and the speciation of dissolved aluminium was calculated (MINTEQA2). The fitted (FITEQL) pK values for dissociation of acidic groups of humic acid were pK ₁ = 3.7±0.1 and pK ₂ = 6.6±0.1 and the total acidity was 4.56 mmol g⁻¹. The pH range for the adsorption study was limited to between pH 5 and 10, where the amount of the aluminium species in the aqueous phase is negligible (less than 10⁻⁵ mol dm⁻³) and the complicating side equilibria can be neglected. Adsorption isotherms were determined at pH ∼ 5.5, ∼8.5 and ∼9.5, where the surface of adsorbent is positive, neutral and negative, respectively, and at 0.001, 0.1, 0.25 and 0.50 mol dm⁻³ NaNO₃. The isotherms are of the Langmuir type, except that measured at pH ∼ 5.5 in the presence of 0.25 and 0.5 mol dm⁻³ salt. The interaction between humic acid/humate and aluminium oxide is mainly a ligand-exchange reaction with humic macroions with changing conformation under the influence of the charged interface. With increasing ionic strength the surface complexation takes place with more and more compressed humic macroions. The contribution of Coulombic interaction of oppositely charged partners is significant at acidic pH. We suppose heterocoagulation of humic acid and aluminium oxide particles at pH ∼ 5.5 and higher salt content to explain the unusual increase in the apparent amount of humic acid adsorbed. Received: 20 July 1999 /Accepted in revised form: 20 October 1999     

Complexation Studies of N,N′-ethylenedi-L-cysteine with Some Metal Ions

As part of a search for environmentally friendly metal chelating ligands, the stability constants of N, N′-ethylenedi-L-cysteine (EC) complexes with Ca(II), Cu(II), Mg(II) and Mn(II) were determined by potentiometry with a glass electrode in aqueous solutions containing 0.1 mol⋅L⁻¹ KCl at 25 °C. Final models are proposed. For the Ca(II)–EC system, the overall stability constants are log ₁₀ β _CaHL=14.53±0.03, log ₁₀ β _CaL=4.79±0.01 and log ₁₀ β _CaL2=8.38±0.04. For the M(II)–EC systems, where M=Cu(II) or Mg(II), the overall stability constants are log₁₀ β _CuHL=31.19±0.02 and log ₁₀ β _CuL=27.02±0.06 for Cu(II), and are log ₁₀ β _MgHL=14.84±0.02 and log ₁₀ β _MgL=6.164±0.008 for Mg(II). For the Mn(II)–EC system, the overall stability constant is log ₁₀ β _MnL=10.12±0.01. Metal–chelate speciations simulations showed that EC is an efficient chelating agent for Cd(II), Co(II), Cu(II), Ni(II), Pb(II) and Zn(II) for pH≥7.     

Polydisperse fractal aggregate formation in clay mineral and iron oxide suspensions, pH and ionic strength dependence

pH- and ionic-strength-dependent aggregation of permanently and conditionally charged clay mineral (montmorillonite) and iron oxide (magnetite) particles was investigated by means of dynamic light scattering and rheology. An indifferent electrolyte (NaCl) was used. The surface charging of solids was determined by acid–base titration. The point of zero charge (PZC) of magnetite seemed to be at pH 8.0 ± 0.1. The permanent negative charges on the basal plane of montmorillonite influence the interfacial distribution of H⁺ and Na⁺ ions. The pH dependence of the electrophoretic mobility showed directly the dominance of negative charges on montmorillonite lamellae independently of pH, while for magnetite the sign of the mobility reversed at pH ˜ 8.0. Montmorillonite particles formed stable suspensions; coagulation did not take place below 35 mM 1:1 electrolyte independently of pH. The aggregation of magnetite sol becomes significant near the pH of the PZC even at low ionic strength. Colloidal stability in composite systems was investigated at pH ˜ 4, where oxide and clay mineral particles are oppositely charged. At the lowest NaCl concentrations (1, 5 mM) the mixed systems remained stable and aggregation of oppositely charged particles could not be observed at all. Heterocoagulation of dissimilar particles needed a definite amount of dissolved electrolytes (about 8 mM). Mixed clay mineral and oxide systems are more sensitive to electrolyte under acidic conditions than those separately. Rheological investigation of the mixed clay mineral–oxide suspensions at pH ˜ 4 provided proof for the absence of attractive particle interaction at low ionic strength (2 mM). A physical network of oppositely charged particles could form only at higher salt concentration, for example, in the presence of 10 mM NaCl. The yield value of plastic systems showed a significant maximum at 1:15 magnetite/montmorillonite mass ratio. Received: 21 November 2000 Accepted: 20 December 2000     

Synthesis of some azacrown derivatives and fabrication of their nanofilms on the glassy carbon surface

The modification of N-phenyl-aza-15-crown-5 (PA15C5) and N-(4-aminophenyl)-aza-15-crown-5 (4APA15C5) on glassy carbon (GC) electrode was performed by the electrochemical oxidation of the corresponding azacrown derivatives in anhydrous acetonitrile media. The electrochemical behavior of the resulting modified GC electrode was investigated in the presence of electroactive redox probes and these results, together with the X-ray photoelectron spectroscopy (XPS) and reflection-absorption infrared spectroscopy were used to confirm the attachment of these molecules onto the GC surface. The ellipsometric thicknesses of PA15C5 and 4APA15C5 films at the GC surface was obtained around 9.28 ± 0.40 and 10.50 ± 1.10 nm, respectively. Azacrown modified nanoscale surfaces serve as alkali metal sensor specific for their cavity in the crown ring.     

High-performance affinity chromatography and the analysis of drug interactions with modified proteins: binding of gliclazide with glycated human serum albumin

This study used high-performance affinity chromatography (HPAC) to examine the binding of gliclazide (i.e., a sulfonylurea drug used to treat diabetes) with the protein human serum albumin (HSA) at various stages of modification due to glycation. Frontal analysis conducted with small HPAC columns was first used to estimate the number of binding sites and association equilibrium constants (K _a) for gliclazide with normal HSA and glycated HSA. Both normal and glycated HSA interacted with gliclazide according to a two-site model, with a class of high-affinity sites (average K _a, 7.1–10 × 10⁴ M⁻¹) and a group of lower-affinity sites (average K _a, 5.7–8.9 × 10³ M⁻¹) at pH 7.4 and 37 °C. Competition experiments indicated that Sudlow sites I and II of HSA were both involved in these interactions, with the K _a values for gliclazide at these sites being 1.9 × 10⁴ and 6.0 × 10⁴ M⁻¹, respectively, for normal HSA. Two samples of glycated HSA had similar affinities to normal HSA for gliclazide at Sudlow site I, but one sample had a 1.9-fold increase in affinity at this site. All three glycated HSA samples differed from normal HSA in their affinity for gliclazide at Sudlow site II. This work illustrated how HPAC can be used to examine both the overall binding of a drug with normal or modified proteins and the site-specific changes that can occur in these interactions as a result of protein modification.     

High Level Expression of an Acid-Stable Phytase from <Emphasis Type="Italic">Citrobacter freundii</Emphasis> in <Emphasis Type="Italic">Pichia pastoris</Emphasis>

To obtain a high level expression of phytase with favorable characteristics, a codon-optimized phytase gene from Citrobacter freundii was synthesized and transferred into Pichia pastoris. Small-scale expression experiments and activity assays were used to screen positive colonies. After purified by Ni²⁺–NTA agarose affinity column, the characterizations of the recombinant phytase were determined. The recombinant phytase (r-phyC) had two distinct pH optima at 2.5 and 4.5 and an optimal temperature at 50 °C. It retained more than 80% activity after being incubated under various buffer (pH 1.5–8.0) at 37 °C for 1 h. The specific activity, Km, and Vmax values of r-phyC for sodium phytate were 2,072 ± 18 U mg⁻¹, 0.52 ± 0.04 mM, and 2,380 ± 84 U mg⁻¹ min⁻¹, respectively. The enzyme activity was significantly improved by 1 mM of K⁺, Ca²⁺, and Mg²⁺. These characteristics contribute to its potential application in feed industry.     

Capillary array isoelectric focusing with laser-induced fluorescence detection: milli-pH unit resolution and yoctomole mass detection limits in a 32-channel system

We report a multiplexed capillary electrophoresis system employing an array of 32 capillaries with a micromachined sheath-flow cuvette as the detection chamber. The sample streams were simultaneously excited with a 473-nm laser beam, and the fluorescence emission was imaged on a CCD camera with a pair of doublet achromat lens. The instrument produced mass detection limits of 380 ± 120 yoctomoles for fluorescein in zone electrophoresis. Capillary isoelectric focusing of fluorescent standards produced peaks with an average width of 0.0029 ± 0.0008 pH. Capillary coating stability limits the reproducibility of the analysis.     

First results on Fe solid-phase extraction from coastal seawater using anatase TiO2 nano-particles

This paper describes the application of TiO₂ nano-particles (anatase form) for the solid-phase extraction of iron from coastal seawater samples. We investigated the adsorption processes by infra-red spectroscopy. We compared in batch and on-(mini)column extraction approaches (0.1 and 0.05 g TiO₂ per sample, respectively), combined to external calibration and detection by inductively coupled plasma mass spectrometry at medium mass resolution. Globally, this titania phase was slightly more efficient with seawater than with ultra-pure water, although between pH 2 and pH 7, the Fe retention efficiency progressed more in ultra-pure water than in seawater (6.9 versus 4.8 times improvement). Different reaction schemes are proposed between Fe(III) species and the two main categories of titania sites at pH 2 (adsorption of [FeL _x ]^{(3 − x)+} via possibly the mediation of chlorides) and at pH 7 (adsorption of [Fe(OH)₂]⁺ and precipitation of [Fe(OH)₃]⁰). Under optimised conditions, the inlet system was pre-cleaned by pumping 6% HCl for ∼2 h, and the column was conditioned by aspirating ultra-pure water (1.7 g min⁻¹) and 0.05% ammonia (0.6 g min⁻¹) for 1 min. Then 3 g seawater sample was loaded at the same flow rate while being mixed on-line with 0.05% ammonia at 0.6 g min⁻¹ to adjust the pH to 7. The iron retained on the oxide powder was then eluted with 3 g 6% HCl (<0.002% residual salinity in the separated samples). The overall procedural blank was 220 ± 46 (2 s, n = 16) ng Fe kg⁻¹ (the titania was renewed in the column every 20 samples, with 2-min rinsing in between samples with 6% HCl at 1.5 g min⁻¹). The recovery estimated from the Canadian certified reference material CASS-2 was 69.5 ± 7.6% (2 s, n = 4). Typically, the relative combined uncertainty (k = 2) estimated for the measurement of ∼1 μg Fe kg⁻¹ (0.45 μm filtered and acidified to pH 1.5) of seawater was ∼12%. We applied our method to a similar sample, from the coastal region of the North Sea. The agreement well within stated uncertainties of our result with the value obtained independently by isotope dilution mass spectrometry further validated our method.     

Adsorption of neutral polymers on negatively charged liposomes. A novel quantitative method to measure the rate of polymer adsorption on the liposomal surface

We studied the adsorption of two neutral polymers [poly(vinyl pyrrolidone) and poly(vinyl alcohol) (PVA)] on negatively charged liposomes composed of 25:2:3 (molar ratio) soy lecithin/dicetyl phosphate/cholesterol.The liposomes were prepared in buffered solution at pH 7.4 and were mixed with the solution of the polymers in the desired polymer/lipid ratios. Adsorption was measured by determination of the equilibrium bulk concentration of the polymer. Protamine hydrochloride was used to aggregate the liposomes with polymers adsorbed on their surface and to facilitate their separation from the equilibrium bulk solution. In the case of PVA, quantitative adsorption measurements with a specific reagent were possible. Adsorption isotherms were recorded at 25 ± 0.2 °C. It was concluded that adsorbed and nonadsorbed PVA molecules are in equilibrium even at low polymer/lipide ratios. The results were confirmed by dynamic laser light scattering, X-ray diffraction and thermal activity monitoring experiments. Received: 13 October 2000 Accepted: 8 March 2001     

In situ UV-Vis and ex situ IR spectroelectrochemical investigations of amorphous and crystalline electrochromic Nb2O5 films in charged/discharged states

Niobium oxide (Nb₂O₅) films and powders have been obtained via the sol-gel route from an NbCl₅ precursor. XRD spectra revealed that films with pseudohexagonal (TT-phase) and orthorhombic (T-phase) structure were formed at 500  °C and 800  °C, respectively, while at 300  °C films were amorphous. Infrared (IR) and Raman spectra of powders and films of Nb₂O₅ in different polymorphic forms were detected, and vibrational band assignments were made. Electrochromic properties of amorphous films and films with the TT-phase were established from in situ ultraviolet visible (UV-Vis) spectroelectrochemical measurements and correlated with ex situ IR transmission spectra of charged films. Ex situ IR spectra revealed that charging of amorphous films is accompanied by variations of the Nb-O stretching mode intensity, while, for films with the TT- and T-phase, splitting of the Nb₃-O stretching modes and the appearance of polaron absorption were noted with Li⁺ ion insertion. Ex situ X-ray diffraction (XRD) spectra of charged films with the TT-phase showed changes of the unit cell dimensions with charging. The influence of the polaron absorption on the ex situ near-grazing incidence angle (NGIA) IR reflection-absorption spectra of charged/discharged films is discussed in detail. Received: 21 August 1997 / Accepted: 9 October 1997     

Degradation kinetics of the Alternaria mycotoxin tenuazonic acid in aqueous solutions

The degradation kinetics of the Alternaria mycotoxin tenuazonic acid (l-TA) in aqueous buffer were studied over a period of 4 months at different pH levels (3.5 and 7.0) and temperatures (4, 25 and 40 °C). l-TA and its degradation products were quantified by newly developed high-performance liquid chromatography methods with UV or electrospray multistage mass spectrometry detection. At pH 3.5, significant degradation occurred at 25 and 40 °C, the respective l-TA half-lives being 73.8 ± 0.4 and 14.0 ± 0.1 days. Two degradation processes, epimerization and hydrolysis, were evaluated kinetically. The hydrolytically formed iso-deacetyl TA (iso-DTA, epimeric mixture) was found to be the stable end product of l-TA degradation under the conditions of this study. This indicates that iso-DTA as well as the l-TA epimer u-TA are formed in aqueous beverage matrices.     

Analysis of domperidone in pharmaceutical formulations and wastewater by differential pulse voltammetry at a glassy-carbon electrode

The redox characteristics of the drug domperidone at a glassy-carbon electrode (GCE) in aqueous media were critically investigated by differential-pulse voltammetry (DPV) and cyclic voltammetry (CV). In Britton–Robinson (BR) buffer of pH 2.6–10.3, an irreversible and diffusion-controlled oxidation wave was developed. The dependence of the CV response of the developed anodic peak on the sweep rate (ν) and on depolizer concentration was typical of an electrode-coupled chemical reaction mechanism (EC) in which an irreversible first-order reaction is interposed between the charges. The values of the electron-transfer coefficient (α) involved in the rate-determining step calculated from the linear plots of E _p,a against ln (ν) in the pH range investigated were in the range 0.64 ± 0.05 confirming the irreversible nature of the oxidation peak. In BR buffer of pH 7.6–8.4, a well defined oxidation wave was developed and the plot of peak current height of the DPV against domperidone concentration at this peak potential was linear in the range 5.20 × 10⁻⁶ to 2.40 × 10⁻⁵ mol L⁻¹ with lower limits of detection (LOD) and quantitation (LOQ) of 6.1 × 10⁻⁷ and 9.1 × 10⁻⁷ mol L⁻¹, respectively. A relative standard deviation of 2.39% (n = 5) was obtained for 8.5 × 10⁻⁶ mol L⁻¹ of the drug. These DPV procedures were successfully used for analysis of domperidone in the pure form (98.2 ± 3.1%), dosage form (98.35 ± 2.9%), and in tap (97.0 ± 3.6%) and wastewater (95.0 ± 2.9%) samples. The method was validated by comparison with standard titrimetric and HPLC methods. Acceptable error of less than 3.3 % was also achieved. Figure In aqueous media at pH 7.6- 8.4, the DPV and cyclic voltammetry of the drug domperidone (I) at GCE showed an irreversible and diffusion controlled oxidation wave. The values of the electron transfer coefficient (α) involved in the rate determining step were found in the range 0.64± 0.05 confirming the irreversible nature of the peak. The analysis of the drug in pure form and in wastewater samples was successfully achieved     

Separation of molecular tracers sorbed onto atmospheric particulate matter by flash chromatography

In to order increase sensitivity and to reduce the background induced by matrix effects, a method was developed that uses flash chromatography to separate various compounds present in atmospheric aerosol samples prior to their analysis with different analytical techniques (GC–MS, GC–FID, HPLC). For this purpose, flash chromatography using a 4 g silica gel column crossed by eluent at a flow rate of 20 mL min⁻¹ was used. An eluent with enhanced polarity is needed to separate nonpolar (linear and branched alkanes), semipolar (PAH, nitro-PAH and cholesterol) and polar (methoxyphenols, alkanoic acids, and levoglucosan) compounds. Three combinations of solvents were used: hexane for the nonpolar fraction (F1), toluene/hexane for the semipolar fraction (F2) and dimethylformamide for the polar fraction (F3). The use of different eluents for each fraction allows separation of the sample to be accomplished with good repeatability and satisfying yields [85 ± 5% for F1, 81 ± 8% (PAHs), 89 ± 6% (nitro-PAHs) and 74 ± 7% (cholesterol) for F2 and 79 ± 7% (n-alkanoic acids), 40 ± 11% (methoxyphenols) and 77 ± 6% (levoglucosan) for F3]. The methoxyphenol yields were low due to losses during the concentration/evaporation step. This method was then applied to analyse the organic composition of particles collected at an urban site in Strasbourg (France).     

"Dilute-and-shoot" triple parallel mass spectrometry method for analysis of vitamin D and triacylglycerols in dietary supplements

A method is demonstrated for analysis of vitamin D fortified dietary supplements that eliminates virtually all chemical pretreatment prior to analysis, which is referred to as a “dilute-and-shoot” method. Three mass spectrometers, in parallel, plus a UV detector, an evaporative light-scattering detector (ELSD), and a corona charged aerosol detector (CAD) were used to allow a comparison of six detectors simultaneously. Ultraviolet data were analyzed using internal standard, external standard, and response factor approaches. The contents of gelcaps that contained 2,000 IU (50 μg) vitamin D₃ in rice bran oil, diluted to 100 mL, were analyzed without the need for lengthy saponification and extraction. Vitamin D₃ was analyzed using UV detection, extracted ion chromatograms, selected ion monitoring (SIM) atmospheric pressure chemical ionization mass spectrometry (APCI-MS), and two transitions of multiple reaction monitoring (MRM) APCI-MS. The internal standard, external standard, and response factor methods gave values of 0.5870 ± 0.0045, 0.5893 ± 0.0041, and 0.5889 ± 0.0045 μg/mL, respectively, by UV detection. The values obtained by MS were 0.6117 ± 0.0140, 0.6018 ± 0.0244, and 0.5848 ± 0.0146 μg/mL by SIM and two transitions of MRM, respectively. The triacylglycerols in the oils were analyzed using full-scan APCI-MS, electrospray ionization (ESI) MS, up to MS⁴, an ELSD, and a CAD. The method proved to be very sensitive for vitamin D₃, as well as triacylglycerols (TAGs), allowing identification of intact TAGs containing fatty acids up to 28 carbons in length. LC-ESI-MS of glycerin polymers is also demonstrated.     

Depolymerization of Chitosan with a Crude Cellulase Preparation from <Emphasis Type="Italic">Aspergillus Niger</Emphasis>

A crude cellulase preparation from Aspergillus niger was used to depolymerize chitosan. The depolymerization process was followed by measuring the apparent viscocity and the intrinsic viscosity. The optimum conditions for enzymatic hydrolysis were investigated. On the selected optimum conditions (pH 5.0, temperature 50 °C, and an enzyme to substrate ratio of 1:5), chitosan was hydrolyzed for 1, 4, 8, and 24 h, its viscosity-average molecular weights were 3.49 × 10⁴, 1.18 × 10⁴, 5.83 × 10³, and 1.13 × 10³, respectively. Compared with chitosan having viscosity-average molecular weight of 5.18 × 10⁵ before enzymatic hydrolysis, the crude cellulase preparation had rather apparent effect on depolymerization of chitosan. Through the comparison of different origin of cellulases, the prepared cellulase has good ability of enzymatic hydrolysis. The reproducibility and reversibility for enzymatic hydrolysis was appraised. The data are of value for the production of low-molecular weight chitosans and chitooligomers of medical and biotechnological interest.     

Inhibitor screening of pharmacological chaperones for lysosomal β-glucocerebrosidase by capillary electrophoresis

Pharmacological chaperones (PCs) represent a promising therapeutic strategy for treatment of lysosomal storage disorders based on enhanced stabilization and trafficking of mutant protein upon orthosteric and/or allosteric binding. Herein, we introduce a simple yet reliable enzyme assay using capillary electrophoresis (CE) for inhibitor screening of PCs that target the lysosomal enzyme, β-glucocerebrosidase (GCase). The rate of GCase-catalyzed hydrolysis of the synthetic substrate, 4-methylumbelliferyl-β-d-glucopyranoside was performed using different classes of PCs by CE with UV detection under standardized conditions. The pH and surfactant dependence of inhibitor binding on recombinant GCase activity was also examined. Enzyme inhibition studies were investigated for five putative PCs including isofagomine (IFG), ambroxol, bromhexine, diltiazem, and fluphenazine. IFG was confirmed as a potent competitive inhibitor of recombinant GCase with half-maximal inhibitory concentration (IC ₅₀ ) of 47.5 ± 0.1 and 4.6 ± 1.4 nM at pH 5.2 and pH 7.2, respectively. In contrast, the four other non-carbohydrate amines were demonstrated to function as mixed-type inhibitors with high micromolar activity at neutral pH relative to acidic pH conditions reflective of the lysosome. CE offers a convenient platform for characterization of PCs as a way to accelerate the clinical translation of previously approved drugs for oral treatment of rare genetic disorders, such as Gaucher disease.