Surfactant solvation effects and micelle formation in ionic liquids

The formation of micelles in 1-butyl-3-methyl imidazolium chloride (BMIM-Cl) and hexafluorophosphate (BMIM-PF6) were explored using different surfactants and the solvation behavior of the new micellar-ionic liquid solutions examined using inverse gas chromatography.     

Binary ionic liquid mixtures as gas chromatography stationary phases for improving the separation selectivity of alcohols and aromatic compounds

Binary mixtures of two ionic liquids (ILs), 1-butyl-3-methylimidazolium chloride (BMIM-Cl) and 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide (BMIM-NTf2), have been studied for the first time as gas chromatographic stationary phases. The two ILs differ only in the nature of the associated anion. The solvation parameter model was used to examine the change of solvation interactions with the IL stationary phase composition. The hydrogen bond basicity increased linearly as the stationary phase was enriched with the BMIM-Cl IL. The retention factor of short-chained alcohols increased by as much as 1100% when performing the separation on a column containing an IL mixture of 25% BMIM-NTf2/75% BMIM-Cl compared to that of the neat BMIM-NTf2 IL column. By tuning the composition of the IL-stationary phase, the separation selectivity and resolution factors of alcohols and aromatic compounds were improved. A reversal of elution order was observed for specific classes of analytes with enhancements in the stationary phase hydrogen bond basicity.     

The micellar shuttle: thermoreversible, intact transfer of block copolymer micelles between an ionic liquid and water

Poly(1,2-butadiene-block-ethylene oxide) (PB-PEO) block copolymer micelles are found to partition reversibly between an ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]) and water, thereby functioning as micellar shuttles controlled simply by temperature. The micelle size and structure are preserved during this reversible phase transfer. This phenomenon offers a simple means to transport chemicals back and forth between two immiscible phases.     

Study of the interactions between phenolic compounds and micellar media using micellar solid-phase microextraction/gas chromatography

Solid-phase microextraction coupled to gas-chromatography with mass-spectrometry detection has been employed to establish the sensitivity indexes as well as to study the partition coefficients of phenols into ionic and nonionic micelles. The sensitivity indexes values can be used to estimate qualitatively the affinity between phenols and micelles. The studied phenols, some of them with high environmental interest, include chloro-, alkyl-, and methoxy-phenols. The results obtained in this work, using 85 microm polyacrylate fiber and anionic (sodium dodecyl sulphate), cationic (cetyltrimethylammonium bromide), and nonionic (Triton X-100 and polyoxyethylene-10-lauryl ether) surfactants, indicate that SPME is a viable method for estimating the micelle partition coefficients.     

Effect of Confinement on Proton‐Transfer Reactions in Water Nanopools

Proton transfer from the photoacid 8‐hydroxy‐1,3,6‐pyrenetrisulfonic acid (HPTS) to water is studied in reverse micelles with ionic (AOT=sodium dioctyl sulfosuccinate) and non‐ionic (BRIJ‐30=polyoxyethylene(4)lauryl ether) surfactants. The dynamics are studied by probing the transient electronic absorption and transient vibrational absorption, both with sub‐picosecond resolution. The reverse micelle sizes range from approximately 1.6 to 5.5 nm in diameter. For both surfactants it is found that the rate of proton transfer decreases with decreasing reverse micelle size, regardless of surfactant. In addition, for AOT reverse micelles, a fraction of the photoacid molecules exhibit non‐radiative decay, preventing proton transfer.     

离子液体表面活性剂1-丁基-3-甲基咪唑烷基硫酸酯的合成及其在水溶液中的聚集行为

采用离子交换法,由1-丁基-3甲基咪唑氯盐（C4mimCl）和烷基硫酸钠合成了一系列无卤素的阴离子表面活性离子液体—1-丁基-3-甲基咪唑烷基硫酸酯[C4mim][CnH2n 1SO4](n=8,12,16),利用表面张力仪、稳态荧光光谱等手段考察了表面活性离子液体在水溶液表面及体相中的聚集行为,结果表明,与传统无机反离子相比,有机咪唑阳离子[C4mim] 作为反离子的离子液体型表面活性剂具有较高的表面活性,[C4mim] 产生的氢键引起的抑制分子规则排列的作用小于其促进分子有序排列的疏水作用。长烷基链的阴离子是界面膜及胶束的主要组成成分,阴离子疏水烷基碳链的增长虽然可促进胶束的形成,但却在一定程度上抑制[C4mim] 离子参与界面或胶束的形成;阴离子所带烷基链越长,越不利于阳离子[C4mim]＋参与界面膜或胶束的形成,界面膜或胶束中表面活性剂排布越松散,即界面张力越大,体系中胶束聚集数较小。     

Aqueous-mixed ionic liquid system: phase transitions and synthesis of gold nanocrystals

Micelle-vesicle-micelle (MVM) transitions are observed in the aqueous-mixed ionic liquid (1-butyl-3-methylimidazolium octyl sulfate and 3-methyl-1-octylimidazolium chloride) system. The surface activity of mixed ILs, phase behavior, and solution structures in the system have been thoroughly characterized using conductometry, tensiometry, fluorimetry, dynamic light scattering (DLS), viscometry, turbidity, atomic force microscopy (AFM), transmission electron microscopy (TEM), and (1)H NMR techniques. Synergetic interactions between the two ILs in monolayers at the air/water interface and in micelles/vesicles have been determined using the regular solution approach, and the origins of spontaneous vesicle formation in this novel system are discussed. Using a photoreduction method, the formation of stable gold nanoparticles (GNPs) and microscale nanosheets of different shapes and sizes in the micellar and vesicle solutions has been reported. The studies show the potential of a mixed IL system in constructing stable micelles/supramolecular assemblies, such as bilayer vesicles, which are effective in the preparation of the desired nanomaterials.     

Catalytic degradation of lignin model compounds in acidic imidazolium based ionic liquids: Hammett acidity and anion effects

Ionic liquids based on the 1-methylimidazolium cation with chloride, bromide, hydrogen sulfate, and tetrafluoroborate counterions along with 1-butyl-3-methylimidazolium hydrogen sulfate were employed to degrade two lignin model compounds, guaiacylglycerol-β-guaiacyl ether and veratrylglycerol-β-guaiacyl ether. The acidity of each ionic liquid was approximated using 3-nitroaniline as an indicator to measure the Hammett acidity (H₀). While all of the tested ionic liquids were strongly acidic (H₀ between 1.48 and 2.08), the relative acidity did not correlate with the ability of the ionic liquid to catalyze β-O-4 ether bond hydrolysis. The reactivity of the model compounds in the ionic liquids is dependent not only on the acidity, but also on the nature of the ions and their interaction with the model compounds.     

Dynamics of solvent and rotational relaxation of coumarin-153 in room-temperature ionic liquid 1-butyl-3-methyl imidazolium tetrafluoroborate confined in poly(oxyethylene glycol) ethers containing micelles

We have investigated solvent and rotational relaxation of coumarin 153 (C-153) in room-temperature ionic liquid (RTILs) 1-butyl-3-methyl-imidazolium tetrafluoroborate ([bmim][BF(4)]) and the ionic liquid confined in alkyl poly(oxyethylene glycol) ethers containing micelles. We have used octaethylene glycol monotetradecyl ether (C(14)E(8)) and octaethylene glycol monododecyl ether (C(12)E(8)) as surfactants. In the [bmim][BF(4)]-C(14)E(8) micelle, we have observed only a 22% increase in solvation time compared to neat [bmim][BF(4)], whereas in the [bmim][BF(4)]-C(12)E(8) system, we have observed approximately 57% increase in average solvation time due to micelle formation. However, the slowing down in solvation time on going from neat RTIL to RTIL-confined micelles is much smaller compared to that on going from water to water confined micellar aggregates. The 22-57% increase in solvation time is attributed to the slowing down of collective motions of cations and anions in micelles. The rotational relaxation times become faster in both the micelles compare to neat [bmim][BF(4)].     

Self-assembly of block copolymer micelles in an ionic liquid

Four amphiphilic poly((1,2-butadiene)-block-ethylene oxide) (PB-PEO) diblock copolymers were shown to aggregate strongly and form micelles in an ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF(6)]). The universal micellar structures (spherical micelle, wormlike micelle, and bilayered vesicle) were all accessed by varying the length of the corona block while holding the core block constant. The nanostructures of the PB-PEO micelles formed in an ionic liquid were directly visualized by cryogenic transmission electron microscopy (cryo-TEM). Detailed micelle structural information was extracted from both cryo-TEM and dynamic light scattering measurements, with excellent agreement between the two techniques. Compared to aqueous solutions of the same copolymers, [BMIM][PF(6)] solutions exhibit some distinct features, such as temperature-independent micellar morphologies between 25 and 100 degrees C. As in aqueous solutions, significant nonergodicity effects were also observed. This work demonstrates the flexibility of amphiphilic block copolymers for controlling nanostructure in an ionic liquid, with potential applications in many arenas.     

Compressed CO2-enhanced solubilization of 1-butyl-3-methylimidazolium tetrafluoroborate in reverse micelles of Triton X-100

We carried out the first study about the effect of a compressed gas on the properties of reverse micellar solutions with ionic liquid (IL) polar cores. And the properties of compressed CO2/cyclohexane/1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4])/Triton X-100 (TX-100) system were investigated at 288.2, 293.2, 298.2, 308.2 K and different pressures by using phase behavior measurement, small-angle x-ray scattering, and UV-Vis techniques. The concentration of the surfactant in the solution was 0.3 mol/l (M). It was found that compressed CO2 could enhance solubilization of the IL in the reverse micelles considerably at suitable pressures, and formation of the reverse micelles could be controlled easily by pressure. Increase of CO2 pressure resulted in decrease of the micellar sizes at fixed [bmim][BF4]-to-surfactant molar ratios (w), and the size of the reverse micelles increased with the increase of w values. The polarity of the IL cores increased continuously with increasing w value.     

Aerosol-OT in water forms fully-branched cylindrical direct micelles in the presence of the ionic liquid 1-butyl-3-methylimidazolium bromide

A recent investigation on the sodium bis(2-ethylhexyl)sulfosuccinate/water/1-butyl-3-methylimidazolium tetrafluoborate (NaAOT/W/bmimBF(4)) system showed that the anionic two-tailed surfactant NaAOT, that is known to form reverse micelles or planar interfaces (typically lamellar liquid crystals), can originate discrete spherical micelles of normal curvature because of strong interactions with the ionic liquid. The goal of the present paper was to detect macro- and microscopic modifications within such a system upon substitution of the ionic liquid's counter-ion tetrafluoroborate with bromide. Firstly, the phase diagram of the NaAOT/water/bmimBr system was determined. Then, the monophasic regions were investigated by means of NMR self-diffusion and SAXRD experiments. The results obtained proved this system to be surprisingly different from that containing bmimBF(4). This study focused mainly on the characterization of the micellar region, which turned out to be constituted of a bicontinuous nanostructure. This finding can be accounted for suggesting a decreasing of the NaAOT effective surfactant packing parameter, as in the case of NaAOT/water/bmimBF(4) system, although the effect in the presence of Br(-) is less pronounced. Data modeling showed the same degree of interfacial adsorption for the bmim(+) cation in both systems, regardless of the particular counterion used-either BF(4)(-) or Br(-). Thus, the remarkable differences between the two systems appear to be mainly due to a specific counterion effect. This result highlights once again the ions specificity, which is found ubiquitously in chemistry and biology.     

Binding constants and partial molar volumes of primary alcohols in sodium dodecylsulfate micelles

The densities of methanol, ethanol, 1-propanol, 1-butanol and 1-hexanol were measured in aqueous solutions of sodium dodecylsulfate at 25°C. The partial molar volumes of the alcohols at infinite dilution in the aqueous surfactants solutions were calculated and discussed using a mass-action model for the alcohol distribution between the aqueous and the micellar phase. The partial molar volumes of the alcohols in the aqueous and in the micellar phases, and the ratios between the binding constant and the aggregation number, were calculated. The partial molar volume for all the alcohols in micellar phase is 10 cm³-mol^–1 smaller than that in octane. This can be related to the strong hydrophilic interaction between the head groups of the alcohol and the micellized surfactant. From the extrapolated values of the distribution constant and the partial molar volumes in the aqueous and micellar phases, the standard partial molar volume of heptanol in micellar solutions was found to decrease with increasing surfactant concentration. The standard free energy of transfer of alcohols from water to micelles was rationalized in terms of hydrophilic and hydrophobic contributions. A model is proposed in which the empty space around each solute is assumed to be the same in the gas and liquid phases, and is used to explain the behavior of micelles in the presence of amphiphilic solutes.     

Dynamics of solvent and rotational relaxation of coumarin 153 in room-temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate confined in Brij-35 micelles: a picosecond time-resolved fluorescence spectroscopic study

The dynamics of solvent and rotational relaxation of Coumarin 153 (C-153) in ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]) and in the ionic liquid confined in Brij-35 micellar aggregates have been investigated using steady-state and time-resolved fluorescence spectroscopy. We observed slower dynamics in the presence of micellar aggregates as compared to the pure IL. However, the slowing down in the solvation time on going from neat IL to IL-confined micelles is much smaller compared to that on going from water to water-confined micellar aggregates. The increase in solvation and rotational time in micelles is attributed to the increase in viscosity of the medium. The slow component is assumed to be dependent on the viscosity of the solution and involves large-scale rearrangement of the anions and cations while fast component is assumed to originate from the initial response of the anions during excitation. The slow component increases due to the increase in the viscosity of the medium and increase in fast component is probably due to the hydrogen bonding between the anions and polar headgroup of the surfactant. The dynamics of solvent relaxation was affected to a small extent due to the micelle formation.     

Ionic liquids as surfactants in micellar liquid chromatography

This paper is devoted to application of ionic liquids as surfactants in LC of organic compounds, derivatives of 1,4‐thiosemicarbazides. According to HPLC requirements the most advantageous conditions such as transparency for ultraviolet light, low CMC, additional inorganic salt additives, and appropriate organic solvent were established. The CMC was determined using conductivity measurements. Suitability of two different stationary phases: RP‐C18 and cyanopropyl bonded phase was examined under micellar conditions. Chosen ionic liquid surfactant was compared to common traditional amphiphilic reagent – SDS. Elaborated on chromatographic micellar conditions were tested as a pilot technique for prediction of distribution coefficients of organic analytes in ionic liquid‐based aqueous two‐phase system.     

Extraction of rare earth elements with phosphoryl-containing lariat crown ether in the presence of ionic liquids

Interfacial distribution of rare earth elements (REE) La, Ce, Pr, Nd, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, and Y between aqueous solutions of their nitrates and solutions of the lariat crown ether 1,4,10,13-tetraoxa-7,16-diaza(diphenylphosphinylmethyl)cyclooctadecane in dichloroethane was studied in the presence of the ionic liquids 1-butyl-3-methylimidazolium hexafluorophosphate and 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide. The stoichiometry of extracted complexes was determined; the effect of HNO₃ concentration in the aqueous phase and the nature of extractant and ionic liquid on the extraction efficiency of REE(III) was considered.     

Synthesis of Nanotitania on the Surface of Titanium Metal in Ionic Liquids: Role of Water Additions

The anodic oxidation of a titanium metal electrode in two ionic liquids was studied of amorphous titania nanostructures were obtained. The nanostructures are formed only in the case where a hydrophilic ionic liquid (1-butyl-3-methylimidazolium chloride) with addition of some water is used as the electrolyte. The role of water is to provide a sort of construction material (source of oxygen) for titania nanostructures. In the hydrophobic ionic liquid (1-butyl-3-methylimidazolium), the thickness of the anodic oxide increases and no nanostructures are formed.     

Effect of added ionic liquid on aqueous Triton X-100 micelles

Addition of ionic liquids to aqueous surfactant solutions can alter/modify physicochemical properties of such systems in favorable manner. Changes in the properties of aqueous solutions of a useful nonionic surfactant Triton X-100 (TX-100) are assessed upon addition of 2.1 wt% of a common and popular ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6). It is shown that the solubility of 'hydrophobic' bmimPF6 in aqueous TX-100 increases with TX-100 concentration. This observation combined with the conductivity data strongly indicates partitioning of bmimPF6 into TX-100 micellar phase. Behavior of a variety of molecular absorbance [methyl orange, phenol blue, and N,N-diethyl-4-nitroaniline] and fluorescence [phenyl on the TX-100, pyrene, pyrene-1-carboxaldehyde, 2-(p-toluidino)naphthalene-6-sulfonate, and 1,3-bis-(1-pyrenyl)propane] probes further confirm this observation. Statistically insignificant increase in critical micelle concentration (cmc) and decrease in aggregation number (N(agg)) of TX-100 micelles are observed upon addition of 2.1 wt% bmimPF6. Based on the overall data, it is inferred that ionic liquid bmimPF6 partitions into the TX-100 micellar phase; presence of bmimPF6 both close to the core as well as in the palisade layer of TX-100 micelles is suggested. Presence of favorable interactions (e.g., H-bonding, dipole-induced dipole, among others) between bmimPF6 and TX-100 is proposed to be the reason for these observations.     

Ternary cubic phases containing ionic liquid

The phase diagram of 1-butyl-3-methylimidazolium tetrafluoroborate (bmim-BF(4)) in aqueous solutions of oleyl polyoxyethylene (20) ether (C(18:1)E(20)) was determined at 25 degrees C by a combination of visual inspection and small-angle X-ray scattering (SAXS). The micellar cubic Im3m liquid crystalline phase found in the ternary system was investigated by means of SAXS and rheological techniques. The cubic samples show highly elastic gel-like properties indicated by their mechanical and discrete relaxation spectra. Moreover at a constant C(18:1)E(20)/bmim-BF(4) ratio, with decreasing water content the network strength increases. The internal structure apparently becomes more stable, as indicated by an increase in the storage and loss moduli and a decrease in the lattice parameter alpha and interfacial area of per surfactant a(S). Furthermore, investigations on the representative micellar Im3m cubic phases formed in a relatively hydrophobic ionic liquid bmim-PF(6) with C(18:1)E(20) and water ternary system (P(1)), a C(18:1)E(20)/water binary system (J(1)), and C(18:1)E(20)/water/bmim-BF(4) system (B(1)) were made in comparison. It can be clearly seen that appreciably different mechanical spectra and relaxation spectra are shown by the cubic phases investigated. B(1) exhibits a typical gel-like dynamic rheogram while P(1) exhibits fluid-like viscoelastic properties to some extent, and J(1) shows traits of the general Maxwell model. These differences are analyzed through SAXS data as the employment of ionic liquids and their different location in the cubic phases.     

Stereoselective halogenations of alkenes and alkynes in ionic liquids

[reaction: see text]. Room-temperature ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate, 1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium bromide, and 1-butyl-3-methylimidazolium chloride, are used as "green" recyclable alternative to chlorinated solvents for the stereoselective halogenation of alkenes and alkynes.