Effect of pH on the binding of alkyl sulfates to gelatin

A surfactant-selective eletrode in which the membrane is an o-nitrotoluene phase containing a dissolved complex of cetyltrimethylammonium-dodecyl sulfate has been applied to investigations of the interaction between gelatin and alkyl sulfates as well as gelatin and alkyltrimethylammoniumions in dilute aqueous solutions.The binding isotherms were obtained by comparing emf-values obtained for surfactant in water to the electrode potentials in gelatin solutions plotted in terms of surfactant concentration.The binding of alkyl sulfates was measured as a function of pH at constant free surfactant concentration. At pH values 7 the degree of binding is indpendent of the pH of the solution. The level of binding of alkyl sulfates to gelatin increases strongly with increasing chain length of the alkyl sulfate. At pH values 6 the extent of binding increases steeply with decreasing pH. Octyl sulfate shows a very low level of binding even at low pH. Cationics show much weaker interactions with gelatin than anionic surfactants of comparable alkyl chain length.     

Solubilization properties of aqueous solutions of alkyltrimethylammonium halides toward a water-insoluble dye

The solubility of a water-insoluble dye, Sudan Red B, in aqueous sodium halide solutions of tetradecyl-, cetyl-, and stearyltrimethylammonium halides has been measured at different surfactant and salt concentrations, and the dependence of solubilization properties on alkyl chain length has been discussed with reference to the micelle size and shape. At low ionic strengths where only spherical micelles exist, the solubilization power of micellar surfactant slightly increases with increasing the ionic strength, but it sharply increases at high ionic strengths above the threshold value of sphere-rod transition. However, the solubilization power becomes independent of the ionic strength, if their rodlike micelles are sufficiently long. The solubilization capacity increases linearly with increasing the molecular weight, almost independent of counterion species, but the rod-like micelle has a higher solubilization capacity than the spherical micelle. The solubilization capacity is larger for a surfactant with longer alkyl chain, indicating that the dye is solubilized more readily in a larger hydrophobic core. The solubilized dye is situated in a rodlike micelle of alkyltrimethylammonium halides, on average, 4.5–7.5 nm apart from each other.     

Estimation of the critical micelle concentrations and the aggregation numbers of sodium alkyl sulfates by capillary-type isotachophoresis

The analytical procedure for the separation and quantification of bulk and micellar phases for sodium alkyl sulfates has been investigated by a capillary-type isotachophoresis using a potential gradient detector. Monomer solutions were distinguished from micellar solutions at pH 5.5–6.0; hydrochloric acid — L-Histidine mixture was used as the leading electrolyte and 2-(N-Morpholino) ethanesulfonic acid as the terminating electrolyte.The potential unit value (PU value) due to the monomer solutions was larger than that due to the micellar solutions. The zone length due to monomer solutions increased with increasing concentration of surfactant until a given concentration (CMC); beyond this point the values became constant. On the other hand, the zone length due to micellar solutions increased from this point. We report an applicability of capillary-type isotachophoresis to determination of the CMC's and aggregation number for various sodium alkyl sulfates.     

Conformational change of poly(L-lysine) and poly(L-ornithine) and cooperative binding of sodium alkanesulfonate surfactants with different chain length

Conformations of poly(L-lysine) (PLL) and poly(L-ornithine) (PLO) were examined in aqueous solutions of sodium alkanesulfontates (C_nSO₃Na, n=9, 10, 11, 12) in the presence of 0.02 M NaCl by circular dichroism (CD) spectroscopy. These surfactants induce the-structure for PLL and the-helix for PLO. The binding of surfactants on the polypeptides was measured potentiometrically with a surfactant ion electrode and was found to be highly cooperative. The cooperativity increases with increasing chain length of surfactant. The behavior accompanying the surfactant binding and the conformational change indicated that the conformational change requires a certain amount of bound surfactants in the case of C₉SO₃Na and starts immediately on binding of surfactant in the case of C_{1 2}SO₃Na. The clustering of bound surfactants due to the cooperative binding as well as neutralization of polypeptides contributes to their conformational change. A slow conformational change of PLO was found in the time scale of hours, sometimes days, for C₉- and C₁₀SO₃Na at low concentrations, but the binding process reached the equilibrium quickly. This slow mode might occur due to the slow interaction between surfactant/polypeptide complexes.     

Effect of alkyl chain length and size of the headgroups of the surfactant on solvent and rotational relaxation of Coumarin 480 in micelles and mixed micelles

The effect of alkyl chain length and size of the headgroups of the surfactant on the solvation dynamics and rotational relaxation of Coumarin 480 (C-480) has been investigated using dynamic Stokes' shift of C-480 in different types of alkyltrimethylammonium bromide micelles and mixed micelles. The rotational relaxation time increases with increase in alkyl chain length of the surfactant. The increase in the number of alkyl chains of the surfactant leads to the more close packed micelles, hence the microviscosity of the micelles increases and consequently rotational relaxation time increases. Solvation time also increases due to the increase in number of alkyl chains of the surfactant. The change in solvation and rotational relaxation time is more prominent in micelles compared to mixed micelles. The solvation and rotational relaxation time also increase with the increase in size of the headgroup of the surfactant.     

Hemimicelle shape and size

Based on the assumption of spherical hemimicelle with a hydrophobic core of diameter of maximum hydrocarbon chain length of surfactant, the aggregation numbers of hemimicelles have been calculated for several values ofn, the carbon atoms of surfactant alkyl chain. The results are in reasonable good agreement with the hemimicelle aggregation number from experimental data for several corresponding systems. The other possibilities of the hemimicelle shape which allow to incorporate a larger number of hydrocarbon chains in a hemimicelle have also been discussed.On leave from Department of Chemistry, Peking University, Beijing, China     

Interaction of adenosine with alkyltrimethylammonium bromides

The interaction of adenosine with alkyltrimethylammonium bromides, C_mH_2m+1N(CH₃)₃Br(m=16, 14, 12, 10, 8, and 6), has been studied by 1 H NMR spectroscopy. When surfactants exist as monomer units, the adenine ring of adenosine preferentially associates with the middle portion of the alkyl chain of the surfactants. The interaction is less specific with surfactants of shorter alkyl chains. When surfactants form micelles, no specific interaction between the adenine ring and the alkyl chain of the surfactant can be detected. A coordination of the cationic part of the surfactants with the adenine ring is suggested. The degree of association was evaluated from association constants. Similar results were obtained for purine and alkyltrimethylammonium bromide.     

Thermodynamics of surfactant-dye complex formation in aqueous solutions II. Sodium dodecyl sulfate and some azo oil dye systems

Spectrophotometric and thermodynamic investigations are reported of the interactions between anionic surfactant (sodium dodecyl sulfate) and six azo oil dyes (benzene azo naphthalene type) which have an amino group at 4-position of naphthalene. A pronounced spectral change in the dye solution occurs on addition of surfactant. For increasingly surfactant concentrations (below the CMC), the interaction between dye and surfactant is so sharp that the systems may be said to exhibit an isosbestic point; then a new absorption band appears at longer wavelengths. The spectral data can be quantitatively interpreted in terms of a complex formation. The equilibrium coefficients of the complex formation are determined at different temperatures. The thermodynamic parameters of the complex formations (the free energy change (G), enthalpy change (H) and change in entropy (S) are also calculated. The reaction of complex formation is exothermic (H negative).G is dependent on the hydrophobic nature andpKa of the dye. These complexes will form due to hydrophilic-hydrophilic interaction and will become more stable due to hydrophobic-hydrophobic interaction.With increasing amounts of complex, the infinite adsorption, the exhaustion and the rate constant of dyeing for nylon decrease.     

Fading phenomena of azo oil dye in anionic-nonionic surfactant solutions II. Effects of alkyl and/or oxyethylene groups in nonionic surfactant on the fading rate

The effects of alkyl and/or oxyethylene groups in a nonionic surfactant on the fading phenomena of 4-phenylazo-1-naphthol (4-OH), which occur in aqueous solutions of anionic-nonionic surfactant systems, are described; these systems are sodium dodecyl sulfate (SDS) — alkyl poly(oxyethylene) ethers (C_mPOE_n, m=12,14,16, and 18 at n=20; n=10, 20, 30, and 40 at m=16). The fading phenomenon is observed when 4-OH is added to the anionic-nonionic mixed surfactant solutions at a molar ratio of 11. A singlet oxygen, which is caused by the hydrophilic-hydrophilic interaction between two surfactants, is thought to attack the tautomer of 4-OH. The fading rate of 4-OH accelerates with increasing alkyl chain length or with decreasing oxyethylene chain length in the nonionic surfactant molecule. The effect on the fading behavior of 4-OH would be larger for a system which can easily form a mixed micelle than for a system in which two kinds of micelles coexist.     

Microcalorimetric study on micellization of nonionic surfactants with a benzene ring or adamantane in their hydrophobic chains

The micellization of a novel family of nonionic surfactants poly(oxyethylene) glycol alkyl ethers has been studied by microcalorimetry. One of the surfactants has adamantane, and the other nonionic surfactants have a benzene ring in their hydrophobic chains, which moves from the terminal of the hydrophobic chain toward the headgroup. Moreover, the alkyl chain of the nonionic surfactants is straight or branched. Both the critical micelle concentration (cmc) and the thermodynamic parameters associated with the micelle formation have been obtained. The cmc decreases and the enthalpy of micelle formation (deltaH(mic)) becomes less positive gradually as the length of hydrophobic chain increases, whereas the values of cmc and deltaH(mic) tend to increase for the surfactants with a longer ethylene oxide chain. However, the deltaH(mic) value of the surfactant with seven carbon atoms in a hydrophobic chain is more positive than that of the surfactant with six carbon atoms in a hydrophobic chain. Comparing with the nonionic surfactant with a methylene hydrophobic chain, the surfactants with benzene rings and adamantane groups have larger cmc values and the cmc values increase with the size of the groups. Furthermore, moving the phenyl group from the terminal of the hydrophobic chain to the neighbor of the hydrophilic headgroup leads to the decreased cmc. Both the variation of hydrophobic interaction from the movement of phenyl group and pi-pi interaction among adjacent phenyl groups affect deltaH(mic) values.     

Thermochemistry of dissolution of sodium alkylsulfonates

The effect of temperature on the solubility of ionic surfactants was interpreted in terms of standard enthalpy and entropy of dissolution at reference temperature by considering the change in the heat capacity. The significant value of the latter quantity causes the curvature of the function logarithm of equilibrium constant (or solubility) vs. the reciprocal thermodynamic temperature. The solubility data for several sodium n-alkylsulfonates, published by Saito, Moroi, and Matuura, were interpreted by nonlinear regression analysis. It was found that both the enthalpy and entropy of dissolution decrease with the chain length. The heat capacity increases in the course of the dissolution process.     

Adsorption of anionic surfactants on positively charged polystyrene particles II

In the case of cationic polystyrene latex, the adsorption of anionic surfactants involves a strong electrostatic interaction between both the particle and the surfactant, which may affect the conformation of the surfactant molecules adsorbed onto the latex-particle surface. The adsorption isotherms showed that adsorption takes place according to two different mechanisms. First, the initial adsorption of the anionic surfactant molecules on cationic polystyrene surface would be due to the attractive electrostatic interaction between both ionic groups, laying the alkyl-chains of surfactant molecules flat on the surface as a consequence of the hydrophobic interaction between these chains and the polystyrene particle surface, which is predominantly hydrophobic. Second, at higher surface coverage the adsorbed surfactant molecules may move into a partly vertical orientation with some head groups facing the solution. According to this second mechanism the hydrophobic interactions of hydrocarbon chains play an important role in the adsorption of surfactant molecules at high surface coverage. This would account for the very high negative mobilities obtained at surfactant concentration higher than 5×10^–7 M. Under high surface-coverage conditions, some electrophoretic mobility measurements were performed at different ionic strength. The appearance of a maximum in the mobility-ionic strength curves seems to depend upon alkyl-chain length. Also the effects of temperature and pH on mobilities of anionic surfactant-cationic latex particles have been studied. The mobility of the particles covered by alkyl-sulphonate surfactants varied with the pH in a similar manner as it does with negatively charged sulphated latex particles, which indicates that the surfactant now controls the surface charge and the hydrophobic-hydrophilic character of the surface.Dedicated to the memory of Dr. Safwan Al-Khouri IbrahimPresented at the Euchem Workshop on Adsorption of Surfactants and Macromolecules from Solution, Åbo (Turku), Finland, June 1989     

表面活性剂与高分子链混合体系的模拟

计算机模拟了高分子链对表面活性剂胶束形成过程的影响，以及高分子链构象性质随胶束化过程的变化.结果表明,当高分子链与表面活性剂之间的相互作用强度超过临界值后，高分子链的存在有利于表面活性剂胶束的形成.临界聚集浓度（CAC）与临界胶束浓度（CMC）的比值CAC/CMC随高分子链长的增大和相互吸引作用的增强而减小.在CAC之前，高分子链与表面活性剂分子只有动态的聚集；但在CAC之后，表面活性剂胶束随表面活性剂浓度X的增加而增大，并静态地吸附在高分子链上，形成表面活性剂/高分子聚集体.随着表面活性剂分子的加入，高分子链的均方末端距和平均非球形因子先保持恒定；从X略小于CAC开始， 和快速减小，至极小值后又逐渐增大.模拟结果支持高分子链包裹在胶束表面的实验模型.     

Kinetics of adsorption and desorption of sodium alkyl sulfates to and from nylon particles

The desorption rate of surfactant ions from nylon particles was investigated at the concentrations below the critical micelle concentration by applying the stopped-flow method. A mixing cell of stopped-flow spectrophotometer was modified with platinum electrodes for electric conductivity detection. The change in electric conductivity with time in the desorption process was monitored by a memory-recorder system. The surfactants used were sodium decyl, sodium dodecyl, sodium tetradecyl, and sodium hexadecyl sulfates. The desorption rate was independent of the surfactant concentration and the rate constants were obtained by applying the first-order reaction scheme. The adsorption rate constants were estimated from the experimental desorption rate constants and equilibrium constants assuming the second-order kinetics. The desorption rate constants were determined to be 1–6 sec^–1 and the adsorption rate constants to be 2–8×10⁴ mol^–1 dm³ sec^–1; the former decreased and the latter increased with increasing number of carbon atoms in alkyl chain of the surfactants.     

Solution properties of mixed surfactant systems (IV)

Electric properties of mixed anionic-nonionic surfactant systems in aqueous solutions above the CMC have been studied in terms of pNa values, electrical conductivities, and dielectric constants; these systems are sodium 3, 6, 9-trioxaicosanoate (ECL) — alkyl polyoxyethylene ethers (C_mPOE; m=12, 14, 16, and 18). The degree of ionic dissociation of mixed micelle increases with increasing the number of carbon atoms of the alkyl group in the nonionic surfactant. The electrical conductivity increases with increasing the alkyl chain length in the nonionic surfactant, in spite of the increase of the activation energy for conduction. The size of mixed micelles also increases with increasing alkyl chain length. This may be attributed to the fact that the mixed micelle is formed more easily by a nonionic surfactant including long alkyl chains than for one having shorter alkyl chains.     

Effect of pH on colloidal properties of native ovalbumin aqueous systems

The effect of pH on the molecular shape and dispersed state of native ovalbumin molecules in 20 mM phosphate and acetic acid buffer solutions has been studied using small-angle x-ray scattering (SAXS) and a rheological method The degree of association of the OA molecule at the 0.5% colloid system increases slightly with decreasing pH, i.e., 2.10 at pH 7.0, and 2.88 at pH 4.0, and the radius of the OA molecule decreases slightly with decreasing pH, i.e., 24.5 Å at pH 7.0, and 22.0 Å at pH 4.0.The OA colloid shows apparent yield stress and rigidity which are due to a certain ordered arrangement of the molecules. The yield stress and the rigidity increase abruptly at a pH value near to an isoelectric point (ca. pH 4.4). In the dilute system this increment is attributed to the change in the ordered arrangement or in the interparticle interaction, and not to the change in the association state of the OA molecules. The values of the yield stress and the rigidity remain almost constant over a wide concentration range and this feature (an auto-controlled mechanism) is kept over a certain range of pH.     

Precipitation of surfactant salts III. Metal perfluoroalkanecarboxylates

Precipitation of perfluorocarboxylic acids (n-C₃H₇OOH, n-C₇H₁₅COOH, and n-C₉F₁₉COOH) in aqueous solutions of different metal nitrates (K⁺, Ag⁺, Ca²⁺, Ba²⁺, Zn²⁺, Al³⁺, La³⁺) was studied by solubility and calorimetric measurements. The free energy of precipitation per single surfactant chain was found to depend on the chain length but not on the charge of the reacting cation. It was shown that the precipitation of perfluorocarboxylates of multivalent cations was governed by positive entropy change and a low enthalpic contribution, whereas the soaps of monovalent cations exhibited the opposite behavior. The entropy of precipitation was not affected by the chain length of the surfactants in the presence of monovalent cations, but it increased for cations of higher charge.Supported by the NSF Grant CHE-8619509.This paper is dedicated to Professor Armin Weiss on the occasion of his 60th birthday. One of the authors (E. M.) particularly appreciates many years of cooperation with Professor Weiss in editing Colloid and Polymer Science, as well as in many other scientific interactions.     

Fluorescence and viscometry study of complexation of poly(acrylic acid) with poly(acrylamide) and hydrolysed poly(acrylamide)

Interpolymer complexation of poly(acrylic acid) with poly(acrylamide) and hydrolysed poly(acrylamide) was studied by fluorescence spectroscopy and viscometry in dilute aqueous solutions. Changes in chain conformation and flexibility due to the interpolymer association are reflected in the intramolecular excimer fluorescence of pyrene groups covalently attached to the polymer chain. Both poly(acrylamide) and hydrolysed poly(acrylamide) form stable complexes with poly(acrylic acid) at low pH. The molecular weight of poly(acrylic acid) and solution properties such as pH and ionic strength were found to influence the stability and the structure of the complexes. In addition, the polymer solutions mixing time showed an effect on the mean stoichiometry of the complex. The intrinsic viscosity of the solutions of mixed polymers at low pH suggested a compact polymer structure for the complex.     

The spinnability of viscoelastic solutions of tetradecyl- and hexadecyl-trimethylammonium salicylates

The spinnability was measured for aqueous viscoelastic solutions of tetradecyl- and hexadecyltrimethylammonium salicylates (C₁₄TASal, C₁₆TASal) in the absence and presence of sodium salicylate (NaSal) and sodium bromide (NaBr). The spinnability is classified into two types, D and C. While the intrinsic drawing length in type D is proportional to the drawing velocity, the drawing intrinsic length in type C decreases with the drawing velocity or is independent of it. The spinnability changes from type D to C, as the drawing velocity and the surfactant concentration increase, and the temperature lowers. The effect of salt is different between NaSal and NaBr. It can be assumed that a pseudo-network structure composed of rod-like micelles is formed in viscoelastic and spinnable surfactant solutions. Then, the spinnability depends on the balance between the elasticity and the viscosity in which the structure results.     

Interaction between the water soluble poly{1,4-phenylene-[9,9-bis(4-phenoxy butylsulfonate)]fluorene-2,7-diyl} copolymer and ionic surfactants followed by spectroscopic and conductivity measurements

The interaction has been studied in aqueous solutions between a negatively charged conjugated polyelectrolyte poly{1,4-phenylene-[9,9-bis(4-phenoxybutylsulfonate)]fluorene-2,7-diyl} copolymer (PBS-PFP) and several cationic tetraalkylammonium surfactants with different structures (alkyl chain length, counterion, or double alkyl chain), with tetramethylammonium cations and with the anionic surfactant sodium dodecyl sulfate (SDS) by electronic absorption and emission spectroscopy and by conductivity measurements. The results are compared with those previously obtained on the interaction of the same polymer with the nonionic surfactant C12E5. The nature of the electrostatic or hydrophobic polymer-surfactant interactions leads to very different behavior. The polymer induces the aggregation with the cationic surfactants at concentrations well below the critical micelle concentration, while this is inhibited with the anionic SDS, as demonstrated from conductivity measurements. The interaction with cationic surfactants only shows a small dependence on alkyl chain length or counterion and is suggested to be dominated by electrostatic interactions. In contrast to previous studies with the nonionic C12E5, both the cationic and the anionic surfactants quench the PBS-PFP emission intensity, leading also to a decrease in the polymer emission lifetime. However, the interaction with these cationic surfactants leads to the appearance of a new emission band (approximately 525 nm), which may be due to energy hopping to defect sites due to the increase of PBS-PFP interchain interaction favored by charge neutralization of the anionic polymer by cationic surfactant and by hydrophobic interactions involving the surfactant alkyl chains, since the same green band is not observed by adding either tetramethylammonium hydroxide or chloride. This effect suggests that the cationic surfactants are changing the nature of PBS-PFP aggregates. The nature of the polymer and surfactant interactions can, thus, be used to control the spectroscopic and conductivity properties of the polymer, which may have implications in its applications.