2-甲基-4-羟基-6-苯基嘧啶和2-甲基-4-羟基-5-溴-6-苯基嘧啶的高效液相色谱法分离测定

采用ODS-C18色谱柱和紫外检测器,对2-甲基-4-羟基-6-苯基嘧啶和2-甲基-4-羟基-5-溴-6-苯基嘧啶的含量进行HPLC分离测定.以甲醇水=4555为流动相,紫外检测波长为237 nm,样品线性范围为0.001～0.1 mg/mL.2-甲基-4-羟基-6-苯基嘧啶的RSD为0.5%;2-甲基-4-羟基-5-溴-6-苯基嘧啶的RSD为1.0%.     

2-甲氧基-3-氟-4-碘吡啶的合成

2-甲氧基-3-氟-4-碘吡啶是一个重要的医药化工中间体,其合成路线未见文献报道。以2-甲氧基-3-氟-5-氯吡啶为起始原料,经氢解和碘代两步反应合成标题化合物,总收率62.8%,其结构经¹H NMR, ¹³C NMR和MS确证。     

4-甲基-苯磺酸-2-氧-2-[3-(5-芳基-[1,3,4]噁二唑-2-基)-硫脲]-乙基酯的合成及生物活性研究

合成了12个未见文献报道的4-甲基-苯磺酸2-氧-2-[3-(5-芳基-[1,3,4]噁二唑-2-基)-硫脲]-乙基酯, 其结构经元素分析、¹H NMR和IR确证. 初步活性测试结果表明: 部分化合物有较好的杀菌活性.     

卤代-2-(3-甲基-5-取代-4H-1,2,4-三唑-4-基)-苯甲酸的合成

邻氮基苯甲酸;缩合反应;卤代-2-(3-甲基-5-取代-4H-1;2;4-三唑-4-基)-苯甲酸的合成     

稳定烯醇结构3-氯-2-羟基-4-羰基-4-对甲苯基-2-丁烯酸乙酯的合成

以甲苯为起始原料,通过傅克-酰基化、Aldol反应合成了具有稳定烯醇结构的3-氯-2-羟基-4-羰基-4-对甲苯基-2-丁烯酸乙酯,反应过程生成了中间体3,3-二氯-2-羟基-4-羰基-4-对甲苯基丁酸乙酯,采用红外、核磁共振谱、HRMS产品进行了测定和结构表征。对反应机理进行了初步探讨。     

(±)-12-乙基-13-甲氧基-8,11,13-罗汉松三烯-7-酮和(±)-12-乙基-13-甲氧基-8,11,13-罗汉松三烯的全合成

以α-环柠檬醛(1)为A环合成子,以季盐(2)为C环合成子,经缩合及分子内环化反应得到关键中间体(5).为引入乙基,进行了Friedel-Crafts反应和脱氧反应等,共经7步反应得到了(±)-12-乙基-13-甲氧基-8,11,13-罗汉松三烯-7-酮[(±)-nimbonone](9)及(±)-12-乙基-13-甲氧基-8,11,13-罗汉松三烯(10).     

3-甲基-1-戊烯-4-炔-3-醇的合成

以甲基乙烯酮为原料,用乙炔基格氏试剂对其加成,然后水解得到目标物3-甲基-1-戊烯-4-炔-3-醇。研究了温度对反应的影响,发现在25℃的反应温度下,目标化合物的气相色谱产率为50%,减压蒸馏纯化后收率为30%。目标产物用1HNMR、IR进行了表征。     

2-烷基氨基-3-芳基-5-苄基-1-咪唑啉-4-酮的合成及杀菌活性

咪唑啉酮衍生物;反应;2-烷基氨基-3-芳基-5-苄基-1-咪唑啉-4-酮的合成及杀菌活性     

3-甲基-2-戊烯-4-炔醛的合成新方法

化合物3-甲基-2-戊烯-4-炔-1-醛两端均为活性官能团,在分子连接及成环反应中能够起到非常重要的作用,是合成轮烯酮[1-7],脱落酸[8]和二苯基二苯并环辛烯[9]等的重要中间体.     

(3E)-胆甾-4-烯-3,6-二酮-3-肟和(6E)-胆甾-4-烯-3,6-二酮-6-肟的1D-NMR谱学特征及构象分析

采用1H和13C NMR对海绵中存在的同分异构体(6E)-胆甾-4-烯-3,6-二酮-6-肟(1)和(3E)-胆甾-4-烯-3,6-二酮-3-肟(2)进行结构分析,表征了它们在1H和13C NMR波谱中H2～H7及C2～C7之问的谱学差别,并对造成这种差别的原因进行了分析,同时对这两种位置异构体进行了构象分析和结构区分.     

Cross coupling of 3-bromopyridine and sulfonamides (RNHSO2R·R = H, Me, alkyl; R = alkyl and aryl) catalyzed by CuI/1,3-di(pyridin-2-yl)propane-1,3-dione

N-(3-Pyridinyl)-substituted secondary and tertiary sulfonamides have been synthesized in good to excellent yields by the reaction of 3-bromopyridine with primary and secondary alkyl and aryl sulfonamides (MeSO₂NH₂, MeSO₂NHMe, TolSO₂NH₂, TolSO₂NHMe, 1,3-propanesultam, and 1,4-butanesultam), catalyzed by CuI (20 mol %) and 1,3-di(pyridin-2-yl)propane-1,3-dione (20 mol %) with K₂CO₃ (200 mol %) in DMF (0.17 M for ArBr) at 110-120 °C over 36-40 h. 2-Bromopyridine, 4-bromopyridine, and a wide variety of substituted phenyl bromides can also be successfully coupled with sulfonamides under these reaction conditions.     

A versatile copper-catalyzed coupling reaction of pyridin-2(1H)-ones with aryl halides

A robust method has been developed to couple a wide variety of pyridin-2-ones and aryl halides. This C-N bond forming reaction makes use of catalytic copper(I) iodide and the ligand 8-hydroxyquinoline. These conditions tolerate a wide degree of functionality on both the aryl halide and pyridin-2-one reactants and have resulted in numerous examples being synthesized.     

Synthesis of polysubstituted furans via a novel and efficient heterocyclization approach

A new catalyst-free, one-pot synthesis of polysubstituted furans is reported. A series of [4-(4-aryl)-5-(cyclohexylamino)-2-(pyridin-2-yl)furan-3-yl](pyridin-2-yl)methanones was synthesized via multicomponent reaction of 1,3-di(pyridin-2-yl)propane-1,3-dione, aryl aldehydes, and cyclohexyl isocyanide.     

An efficient copper-catalyzed coupling reaction of pyridin-2-ones with aryl and heterocyclic halides based on Buchwald's protocol

An efficient copper-catalyzed coupling reaction based on the Buchwald's protocol has been established for pyridin-2-ones with aryl iodides, aryl bromides, and heterocyclic bromides.     

Palladium‐Catalyzed Site‐Selective C−H Functionalization of Weakly Coordinating Sulfonamides: Synthesis of Biaryl Sulfonamides

A novel and site selective C?H functionalization of unsubstituted sulfonamides has been developed for the synthesis of ortho aryl sulfonamides. The reaction involves highly regioselective ortho mono arylation of weakly coordinating SO₂NH₂ directing group by means of aryl iodides. Palladium acetate in the presence of silver(I) oxide is found to be the most effective catalytic system.     

Functional Derivatives of Ethyl 4-(Chloromethyl)-2,6-dimethylpyridine-3-carboxylate

The condensation of ethyl 4-(chloromethyl)-2,6-dimethylpyridine-3-carboxylate with substituted phenols in ethanol in the presence of potassium carbonate afforded the corresponding aryl pyridin-4-ylmethyl ethers. Analogous condensation with substituted anilines gave 2-aryl-4,6-dimethyl-1,2-dihydropyrrolo[3,4-c]- pyridin-3-ones. Esters containing 1,2-azole fragments were synthesized by acylation of hydroxymethylsubstituted ethers with 5-arylisoxazole- and 4,5-dichloroisothiazole-3-carbonyl chlorides.     

Three component reaction of aryl diazonium salt with sulfonamide & actonitrile to synthesize N-sulfonyl amidine

A new method was developed to prepare N-sulfonyl amidine compounds through three-component reaction of aryl diazonium salts with sulfonamides and acetonitrile, in which, nitrilium ion intermediate, generated from the reaction of aryldiazonium salt with nitrile, was subsequently trapped by sulfonamides. A series of N-sulfonyl amidine derivatives were synthesized by using various types of aryl diazonium salts, sulfonamides and nitriles. In addition, indolyl imine products could also be prepared by using indole as the nucleophile to trap nitrilium ion intermediate.     

Unique CuI-pyridine based ligands catalytic systems for N-arylation of indoles and other heterocycles

Two pyridine-based ligands (N-((pyridin-2-yl) methyl) pyridin-2-amine) L1 and (N-((pyridin-2-yl) methylene) pyridin-2-amine) L2 are explored in present work which are inexpensive, effective and environmentally benign in their properties. These have been utilized for C-N cross coupling reaction resulting in N-arylation. The N-arylation of indole, imidazole and triazole have been successfully carried out with different aryl and heteroaryl halides using these ligands.     

Synthesis,optical, and spectroscopic characterisation of substituted 3-phenyl-2-arylacrylonitriles

The Knoevenagel condensation between aldehydes and substrates with active methylene groups was applied to synthesise a series of 3-(4-substituted phenyl)-2-arylacrylonitriles (aryl = phenyl or pyridyl). Chloro-, fluoro-, or dimethylamino-substituted aryls and a cyano group attached to the double bond of acrylonitrile were studied. Previous studies showed that the condensation products were E isomers. The compounds synthesised were: 3-(4-chlorophenyl)-2-phenylacrylonitrile, 3-(4-chlorophenyl)-2-(pyridin-2-yl)acrylonitrile, 3-(4-chlorophenyl)-2-(pyridin-3-yl)acrylonitrile, 3-(4-chlorophenyl)-2-(pyridin-4-yl)acrylonitrile, 3-(4-fluorophenyl)-2-phenylacrylonitrile, 3-(4-fluorophenyl)-2-(pyridin-2-yl)acrylonitrile, 3-(4-fluorophenyl)-2-(pyridin-3-yl)acrylonitrile, 3-(4-fluorophenyl)-2-(pyridin-4-yl)acrylonitrile, 3-(4-dimethylaminophenyl)-2-phenylacrylonitrile, 3-(4-dimethylaminophenyl)-2-(pyridin-2-yl)acrylonitrile, 3-(4-dimethylaminophenyl)-2-(pyridin-3-yl)acrylonitrile, and 3-(4-dimethylaminophenyl)-2-(pyridin-4-yl)acrylonitrile. Structures were confirmed by IR, MS, and NMR spectral data. Molar absorption coefficient, absorbance, and fluorescence emission spectra were compared in order to evaluate the effects of substituents on phenyl and the position of nitrogen in pyridine moiety on the electronic properties of acrylonitrile derivatives prepared.     

Reaction of Ethyl 6-Alkyl(aryl)-4-chloromethyl-2-methylpyridine-3-carboxylates with Ammonia and Primary Amines

Ethyl 6-alkyl(aryl)-4-chloromethyl-2-methylpyridine-3-carboxylates react with ammonia andprimary amines to give 6-substituted 3-alkyl(aryl)-1-methyl-1'2-dihydropyrrolo[3'4-c]pyridin-7-ones.The reactions with 4-aminopyridine yield ethyl 6-alkyl(aryl)-2-methyl-4-(4-pyridylaminomethyl)pyridine-3-carboxylates.