Nafion膜固定的麦尔多拉蓝为介体的过氧化氢、葡萄糖和乳糖生物传感器

以Nafion膜修饰玻碳电极固定的麦尔多拉蓝为辣根过氧化物酶和电极间的电子传递介体，成功地制成了性能优良的电流型单酶过氧化氢生物传感器；在此基础上通过固定双酶（辣根过氧化物酶－葡萄糖氧化酶）和三酶（辣根过氧化物酶－葡萄糖氧化酶－半乳糖苷酶）分别制成了葡萄糖和乳糖生物传感器；探讨了工作电位、pH、温度和干扰物质等对这3种生物传感器的影响。     

SiO_2/Nafion杂化膜固定酶的过氧化氢生物传感器

通过溶胶-凝胶技术制备SiO2/Nafion杂化膜并固定辣根过氧化物酶,以杂化膜中Nafion固定的亚甲基蓝为辣根过氧化物酶和玻碳电极间的电子传递介体,制成了电流型过氧化氢生物传感器。探讨了杂化膜的制备条件、工作电位、pH值、温度、干扰物质等对生物传感器的影响。该生物传感器的线性响应范围为1.0×10-6～1.6×10-4mol/L,检出限(S/N=3)为6.0×10-7mol/L,达到95%稳态响应电流用时少于15s。固定化酶对过氧化氢催化反应的米氏常数为1.129 mmol/L。     

Nafion 膜固定的新亚甲基蓝为介体生物传感器

以Nafion膜固定的新亚甲基蓝为辣根过氧化物酶和玻碳电极间的电子传递介体,制成电流型单酶过氧化氢生物传感器和双酶葡萄糖生物传感器。探讨了工作电位、pH值、温度和干扰物质等对生物传感器的影响。     

基于纳米金和硫堇固定酶的过氧化氢生物传感器

在铂电极上自组装一层纳米金(GNs), 构建负电荷的界面, 然后通过金-硫、金-氮共价键合作用和静电吸附作用自组装一层阳离子电子媒介体硫堇(Thio). 再以同样的作用自组装一层GNs和辣根过氧化酶(HRP)的混合物, 最后在电极最外层滴加一层疏水性聚合物壳聚糖(Chit), 由此制备了一种新型的过氧化氢生物传感器. 研究了工作电位、检测底液pH、温度对响应电流的影响, 以及GNs和HRP之间的相互作用, 探讨了传感器的表面形态、交流阻抗、重现性和稳定性. 该传感器的酶催化反应活化能为12.4 kJ/mol, 表观米氏常数为6.5×10^－4 mo/L, 在优化的实验条件下, 所研制的传感器对H₂O₂的线性范围为5.6×10^－5～2.6×10^－3 mol/L, 检出限为1.5×10^－5 mol/L. 应用此方法制备了HRP和葡萄糖氧化酶(GOD)双酶体系葡萄糖生物传感器, 并应用于实验样品葡萄糖含量的测定.     

氯化血红素模拟过氧化物酶高效液相色谱柱后衍生法测定过氧化氢和 …

研究了氯化血红素（Ｈｅｍｉｎ）模拟辣根过氧化物酶（ＨＲＰ），对羟基苯乙酸（ＰＨＰＡＡ）作底物，高效液相色谱（ＨＰＬＣ）柱后衍生物荧光法测定Ｈ２Ｏ２和水溶性有机过氧化物的方法，采用Ｈｅｎｍｉｎ作催化剂柱后衍生反应的最佳ｐＨ值约为１１，与荧光检测ｐＨ值一致，使得以往ＨＰＬＣ柱后衍生方法所需要的高压泵认３台减少到２台，而一些不能作为ＨＲＰ底物的羟烷基过氧化物在ｐＨ值≥１０的溶液中迅速水解为Ｈ２Ｏ２从而得     

壳聚糖/聚乙烯吡咯烷酮固定辣根过氧化物酶的过氧化氢生物传感器

用一种新型的壳聚糖(CS)/聚乙烯吡咯烷酮(PVP)复合膜在玻碳电极(GCE)上固定辣根过氧化物酶(HRP)。以乙二醛作交联剂,二茂铁(Fc)作媒介体,制备过氧化氢生物传感器。红外光谱表明:CS与PVP交联形成了一种新的高聚物,实验结果证明该聚合物适合辣根过氧化物酶的固定。该传感器对于H2O2的电流响应在5 s内即可达到最大,线性范围为6.0×10-6~1.7×10-4mol/L;检出限为2.5×10-6mol/L。该传感器的检测灵敏度为62.5μA/mmol/L。     

聚多巴胺包埋G-四联体/血红素DNA酶制备过氧化氢生物传感器

利用多巴胺的氧化自聚实现对G-四联体/血红素DNA酶的包埋,成功构建了H2O2电化学生物传感器。DNA和血红素混合得到G-四联体/血红素复合物;DNA酶物理吸附在玻碳电极上后,将10μL 5 g/L多巴胺的磷酸盐缓冲液(pH 8.0)滴在表面,空气中的氧气氧化多巴胺形成聚多巴胺膜,实现DNA酶的固定。考察了不同DNA序列对传感器性能的影响,表明电化学与光学传感过程具有不同序列响应。此传感器对H2O2的检出限为2.2μmol/L;线性范围为0.01～1.5 mmol/L。本研究证实了利用聚多巴胺固定酶和用DNA酶代替天然酶构筑传感器的可行性。     

氯化血红素的简便快速分离制备法

氯化血红素的简便快速分离制备法范俊源，罗一鸣，何顺华（湖南医科大学有机化学教研室，长沙４１００７８）氯化血红素（即１，３，５，８－四甲基－２，４－二乙烯基卟吩－６，７－二丙酸氯化铁），简称血红素。血红素是重要的生化试剂、食用色素、以及制备肝脏机能改善...     

溶胶-凝胶壳聚糖/二氧化硅杂化复合膜固定辣根过氧化酶的H2O2电化学生物传感器的研制

利用溶胶 凝胶法制备壳聚糖 二氧化硅有机无机复合杂化膜,用于对辣根过氧化酶进行固定,制得测定H2O2的电流型生物传感器。以1mmol/LK4Fe(CN)6作为电子媒介体。研究了各种因素如壳聚糖与二氧化硅的比率、pH、温度、工作电位等对传感器响应电流的影响。计时电流法测定H2O2的线性范围为2.0×10-6～6.8×10-4mol/L,检出限为8.0×10-7mol/L。测得酶催化动力学参数米氏常数Km=0 87mmol/L。用该法对实际样品进行了测定。     

Hydrogen peroxide biosensor based on hemoglobin modified zirconia nanoparticles-grafted collagen matrix

A novel method for the immobilization of hemoglobin (Hb) and preparation of reagentless biosensor was proposed using a biocompatible non-toxic zirconia enhanced grafted collagen tri-helix scaffold. The formed membrane was characterized with UV-vis and FT-IR spectroscopy, scanning electron microscope and electrochemical methods. The Hb immobilized in the matrix showed excellent direct electrochemistry with an electron transfer rate constant of 6.46 s⁻¹ and electrocatalytic activity to the reduction of hydrogen peroxide. The apparent Michaelis-Menten constant for H₂O₂ was 0.026 mM, showing good affinity. Based on the direct electrochemistry, a new biosensor for H₂O₂ ranging from 0.8 to 132 μM was constructed. Owing to the porous structure and high enzyme loading of the matrix the biosensor exhibited low limit of detection of 0.12 μM at 3σ, fast response less than 5 s and high sensitivity of 45.6 mA M⁻¹ cm⁻². The biosensor exhibited acceptable stability and reproducibility. ZrO₂-grafted collagen provided a good matrix for protein immobilization and biosensing preparation. This method was useful for monitoring H₂O₂ in practical samples with the satisfactory results.     

Development of hydrogen peroxide biosensor based on in situ covalent immobilization of horseradish peroxidase by one-pot polysaccharide-incorporated sol-gel process

A simple and reliable one-pot approach was established for the development of a novel hydrogen peroxide (H₂O₂) biosensor based on in situ covalent immobilization of horseradish peroxidase (HRP) into biocompatible material through polysaccharide-incorporated sol-gel process. Siloxane with epoxide ring and trimethoxy anchor groups was applied as the bifunctional cross-linker and the inorganic resource for organic-inorganic hybridization. The reactivity between amine groups and epoxy groups allowed the covalent incorporation of HRP and the functional biopolymer, chitosan (CS) into the inorganic polysiloxane network. Some experimental variables, such as mass ratio of siloxane to CS, pH of measuring solution and applied potential for detection were optimized. HRP covalently immobilized in the hybrid matrix possessed high electrocatalytic activity to H₂O₂ and provided a fast amperometric response. The linear response of the as-prepared biosensor for the determination of H₂O₂ ranged from 2.0 × 10⁻⁷ to 4.6 × 10⁻⁵ mol l⁻¹ with a detection limit of 8.1 × 10⁻⁸ mol l⁻¹. The apparent Michaelis-Menten constant was determined to be 45.18 μmol l⁻¹. Performance of the biosensor was also evaluated with respect to possible interferences. The fabricated biosensor exhibited high reproducibility and storage stability. The ease of the one-pot covalent immobilization and the biocompatible hybrid matrix serve as a versatile platform for enzyme immobilization and biosensor fabricating.     

Chitosan-based tyrosinase optical phenol biosensor employing hybrid nafion/sol-gel silicate for MBTH immobilization

The development of an optical biosensor based on immobilization of 3-methyl-2-benzothiazolinone hydrazone (MBTH) in hybrid nafion/sol-gel silicate film and tyrosinase in chitosan film for the detection of phenolic compounds has been described. Tyrosinase was immobilized in chitosan film deposited on the hybrid nafion/sol-gel silicate film containing MBTH. The enzymatic oxidation product of phenolic compounds were stabilized through formation of adduct with MBTH to produce a maroon color adduct. The color intensity of adduct was found to increase proportionally with the increase of the substrate concentrations after 5 min exposure. The linearity of the biosensor towards phenol, catechol and m-cresol were in the respective concentration range of 0.5-7.0, 0.5-10.0 and 1.0-13.0 mg/L with detection limit of 0.18, 0.23 and 0.43 mg/L, respectively. The biosensor shows a good stability for at least 3 months.     

基于壳聚糖/TiO2新型杂化材料的过氧化氢传感器

制备了一种新型有机-无机杂化材料,这种杂化材料由二氧化钛溶胶和壳聚糖组成,此杂化材料克服了普通溶胶-凝胶易脆裂的特点,可以有效地保留被包埋的 Hb 生物催化活性;而且碳纳米管和纳米铜的协同效应提高了对过氧化氢的催化性能和促进了电子的传递.研究了各种因素对传感器响应电流的影响.对过氧化氢响应线性范围 1.0×10-7～1...     

A peroxidase-tetrathiafulvalene biosensor based on self-assembled monolayer modified Au electrodes for the flow-injection determination of hydrogen peroxide

The construction and performance under flow-injection conditions of an integrated amperometric biosensor for hydrogen peroxide is reported. The design of the bioelectrode is based on a mercaptopropionic acid (MPA) self-assembled monolayer (SAM) modified gold disk electrode on which horseradish peroxidase (HRP, 24.3 U) was immobilized by cross-linking with glutaraldehyde together with the mediator tetrathiafulvalene (TTF, 1 μmol), which was entrapped in the three-dimensional aggregate formed.

The amperometric biosensor allows the obtention of reproducible flow injection amperometric responses at an applied potential of 0.00 V in 0.05 mol L⁻¹ phosphate buffer, pH 7.0 (flow rate: 1.40 mL min⁻¹, injection volume: 150 μL), with a range of linearity for hydrogen peroxide within the 2.0 × 10⁻⁷–1.0 × 10⁻⁴ mol L⁻¹ concentration range (slope: (2.33 ± 0.02) × 10⁻² A mol⁻¹ L, r = 0.999). A detection limit of 6.9 × 10⁻⁸ mol L⁻¹ was obtained together with a R.S.D. (n = 50) of 2.7% for a hydrogen peroxide concentration level of 5.0 × 10⁻⁵ mol L⁻¹. The immobilization method showed a good reproducibility with a R.S.D. of 5.3% for five different electrodes. Moreover, the useful lifetime of one single biosensor was estimated in 13 days.

The SAM-based biosensor was applied for the determination of hydrogen peroxide in rainwater and in a hair dye. The results obtained were validated by comparison with those obtained with a spectrophotometric reference method. In addition, the recovery of hydrogen peroxide in sterilised milk was tested.     

Probing traces of hydrogen peroxide by use of a biosensor based on mediator-free DNA and horseradish peroxidase immobilized on silver nanoparticles

A new electrochemical biosensor for determination of hydrogen peroxide (H₂O₂) has been developed by immobilizing horseradish peroxidase (HRP) on silver colloids (nanosilver) and use of a DNA-functionalized interface. In the presence of the DNA and the nanosilver the immobilized HRP gives a pair of well-defined redox peaks with an electron-transfer rate constant of 3.27 ± 0.91 s⁻¹ in pH 7.0 PBS. The presence of DNA also provides a biocompatible microenvironment for enzyme molecules, greatly amplifies the amount of HRP molecules immobilized on the electrode surface, and improves the sensitivity of the biosensor. Under optimum conditions the biosensor has electrocatalytic activity in the reduction of hydrogen peroxide with linear dependence on H₂O₂ concentration in the range 1.5 × 10⁻⁶ to 2.0 × 10⁻³ mol L⁻¹; the detection limit is 5.0 × 10⁻⁷ mol L⁻¹ at a signal-to-noise ratio of 3. The value of HRP in the composite membrane was found to be 1.62 mmol L⁻¹. These results suggest that the properties of the complex film, with its bioelectrochemical catalytic activity, could make it useful for development of bioelectronic devices and for investigation of protein electrochemistry at functional interfaces.     

Preparation of cobalt-tetraphenylporphyrin/reduced graphene oxide nanocomposite and its application on hydrogen peroxide biosensor

A novel cobalt-tetraphenylporphyrin/reduced graphene oxide (CoTPP/RGO) nanocomposite was prepared by a π–π stacking interaction and characterized by ultraviolet–visible absorption spectroscopy (UV–vis), Fourier transform infrared spectroscopy (FTIR) and electrochemical impedance spectroscopy (EIS). The CoTPP/RGO nanocomposite exhibited high electrocatalytic activity both for oxidation and reduction of H₂O₂. The current response was linear to H₂O₂ concentration with the concentration range from 1.0 × 10⁻⁷ to 2.4 × 10⁻³ mol L⁻¹ (R = 0.998) at the reductive potential of −0.20 V and from 1.0 × 10⁻⁷ to 4.6 × 10⁻⁴ mol L⁻¹ (R = 0.996) at the oxidative potential of +0.50 V. The H₂O₂ biosensor showed good anti-interfering ability towards oxidative interferences at the oxidative potential of +0.50 V and good anti-interfering ability towards reductive interferences at the reductive potential of −0.20 V.     

A new hydrogen peroxide biosensor based on gold nanoelectrode ensembles/multiwalled carbon nanotubes/chitosan film-modified electrode

Gold nanoelectrode ensembles were produced by electrodeposition using multiwalled carbon nanotubes (MWNTs) as template. A new third generation amperometric biosensor for hydrogen peroxide was developed based on adsorption of horseradish peroxidase (HRP) at the glassy carbon (GC) electrode modified with Au nanoelectrode ensembles/multiwalled carbon nanotubes/chitosan film. The resulting HRP biosensor offered an excellent detection for hydrogen peroxide at −0.11 V with a linear response range of 2.08 × 10⁻⁷ to 7.6 × 10⁻³ M with a correlation coefficient of 0.998, and response time <5 s. The detection limit was 1.02 × 10⁻⁷ M at 3σ. The biosensor displays rapid response, expanded linear response range, and excellent repeatability. The simple and fast fabrication of the sensor makes it superior to other techniques.