微波腔内波混沌散射的初步研究

 通过建立的微波腔模拟产生大量腔体散射矩阵和辐射散射矩阵,并转化得到归一化散射矩阵和阻抗矩阵。利用戴桑环系综对归一化散射矩阵的本征值和本征相位进行了统计分析,其本征值的模和本征相位具有统计独立性,且本征相位近似均一分布,验证了腔体中波混沌散射的存在。对数值模拟和随机矩阵理论预测得到的归一化阻抗的统计特性进行了比较,其结果基本一致,说明随机矩阵理论对归一化阻抗具有一定的预测功能。     

复杂腔体本征电磁场空间分布的统计方法

 利用半经典近似方法分析了电大复杂腔体内电磁波传播的混沌特征,从而引入了3维矢量本征函数的随机平面波假设。根据电磁波传播的随机极化特征,利用统计方法推导出基于该假设本征电磁场空间分布的统计模型。应用数值方法对3维Sinai微波腔体进行模拟计算,其计算结果与统计模型符合较好。这些统计模型与腔体的具体细节特征无关。     

基于实稳定方法求解单粒子共振态的Wigner函数

利用坐标空间的实稳定方法,求解了一维势场中单粒子散射态与其中共振态的本征值问题,由得到的单粒子本征波函数进一步给出相应的Wigner函数,分析了单粒子散射态与其中共振态的相空间分布特征.发现除了本征能量与本征波函数存在差异,Wigner函数在相空间的具体分布行为也可用于区分单粒子共振态与一般的散射态,在相关的量子测量实验中可能用作确定量子态的特征判据.     

基于Wigner分布函数的光学元件评价方法

为了有效地表征和评价光学元件局部小尺度波前畸变,提出了能同时反映空间频率和空间位置的Wigner分布函数评价方法。通过理论分析Wigner分布函数与功率谱密度之间的关系,得到了局部波前畸变的评价方法和指标。模拟计算和实验结果验证了该方法的有效性,并表明:该方法不但能判断光学元件的中频误差是否满足惯性约束聚变系统要求,而且还能确定不满足要求的特定区域,从而有效地指导光学元件的返修。     

SSC新高频腔设计与分析

简要分析了HIRFL SFC与SSC之间的束流匹配关系, 给出了新高频腔的频率范围。 利用经典三维电磁场数值模拟软件MAFIA对SSC新高频腔体进行了模拟计算, 得出了SSC新高频腔体的相关物理参数, 并对频率范围、Q值、 并联阻抗和电压分布等参数进行了分析。 高频腔体的模拟计算结果完全符合SSC回旋加速器改造的物理设计及空间结构要求。     

三维谐振子Wigner函数的星乘解

Wigner函数作为相空间中的一个准概率分布函数,也是密度矩阵的特殊表示形式,具有十分重要的物理意义。首先介绍了Wigner函数的性质及其计算方法,然后利用星本征方程(Moyal方程)计算了三维谐振子的Wigner函数。最后讨论了在相空间中描述声子与电子(或光子)相互作用的方法,并得到了跃迁几率在相空间中所满足的方程。     

KrF激光动力学过程的模拟研究

本文配合KrF激光器的设计,对其动力学过程作了零维模拟计算,并与国内外实验结果进行了比较。通过模拟研究,对KrF激光器本征效率的提高、激光器对入射束流的要求以及对激光腔体的设计等都提出了很好的建议与简单实用的计算模式。     

平面波照射下开孔矩形腔体的电磁耦合与屏蔽效能研究

基于Bethe小孔耦合理论和腔内电磁场的本征模展开, 建立了平面波照射下开孔矩形腔体电磁场分布的近似解析模型. 该模型物理意义清晰, 可以考虑开孔的形状、 尺寸、 个数及位置和入射波的传播与极化方向等参数的影响. 该模型的计算结果优于传统的等效电路方法, 与实验结果的一致性更好. 计算分析了相关因素对电磁屏蔽效能的影响规律, 所得结果对电磁屏蔽腔体的设计有指导意义.     

基于随机矩阵理论的城市人群移动行为分析

移动通信应用为人类移动规律的研究提供了独特的数据来源. 本文通过城市手机用户的分布数据,研究城市移动人群的整体动力学行为. 借助随机矩阵理论的方法,通过比较移动人群数据与随机数据在互相关矩阵谱分布上的差异,发现移动人群数据互相关矩阵的相关系数均值、最大本征值及其对应的本征向量明显偏离于随机互相关矩阵的分布,指出这种差异体现了城市移动人群的整体行为特性,且这种差异在不同时间段也会有所不同. 研究结果体现出相关系数的均值和最大本征值的波动趋势,并指出本征向量成员权重的时空模式与城市移动人群整体行为特征的波动过 关键词： 随机矩阵理论 移动人群 宏观行为     

广义参量Wigner分布函数:一种新的信号双域表示方法

本文基于分数傅里叶变换的概念,提出了由三个广义参量p1、p2和p3所表征的Wigner分布函数-广义参量Wigner分布函数,然后对其性质进行了讨论,并指出广义参量Wigner分布函数也属于一般的Cohen双线性类,而部分相干光场的互谱密度、传统的Wigner分布函数以及分数Wigner分布函数都可以作为广义参量Wigner分布函数在其广义参量取特殊值时的特例而得到,表明广义参量Wigner分布函数具有比传统的Wigner分布函数更强的信号表征能力.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.