Determination of Phenolic Acids in Danshen Preparations by LC with Chemiluminescence Detection

A simple and sensitive method has been developed for the simultaneous determination of eight phenolic acids in Danshen preparations based on liquid chromatography with chemiluminescence detection. Chemiluminescence parameters including flow rate, buffer pH, the concentration of luminescent and reactive solutions, were optimized. The analytical performance of the optimized luminol-H₂O₂ detection was compared with those of luminol-pyrogallol and UV detection. Under the optimized conditions, the method was validated with respect to linearity, precision, limits of detection and quantification. The method offers an attractive alternative to be used to evaluate the quality of Danshen preparations.     

点击化学在食品安全检测中的应用研究进展

点击化学因具有反应模块化、无有毒有害副产物、反应效率高等出色的反应性能备受关注,是继组合化学之后又一新型合成技术,在材料表面功能化、大分子聚合物的合成、生物标记等领域得到了广泛应用.点击反应试剂的活性基团易于修饰在其他化学基团上,表明点击反应有望作为中间反应介导特定反应的信号转换或放大.近几年出现了大量基于点击化学构建...     

PNA-based probe for quantitative chemiluminescent in situ hybridisation imaging of cellular parvovirus B19 replication kinetics

To allow the ultrasensitive localization and the quantitative detection of parvovirus B19 nucleic acids in single infected cells at various times post-infection, a peptide nucleic acid (PNA)-based in situ hybridisation (ISH) assay with chemiluminescent detection has been developed. The assay is based on the use of a biotin-labelled PNA probe detected by a streptavidin-linked alkaline phosphatase and a chemiluminescent dioxetane phosphate derivative substrate. The luminescent signal was quantified and imaged with an ultrasensitive nitrogen-cooled CCD camera connected to an epifluorescence microscope. The assay was used to analyze the parvovirus B19 infection process in cell cultures and to quantify the amount of viral nucleic acids at different times after infection.The chemiluminescent ISH-PNA assay is characterized by high resolution providing a sharp localization of B19 nucleic acids within single cells, with higher sensitivity with respect to conventional colorimetric ISH detection. Thanks to the high detectability and wide linear range of chemiluminescence detection, an objective evaluation of the percentage of infected cells, which reached its maximum at 24 h after infection, following a B19 virus infectious cycle could be accurately evaluated. Chemiluminescence detection also allowed the quantitative analysis of viral nucleic acids at the single-cell level, showing a continuous increase of the content of viral nucleic acids in infected cells with time after infection.The developed chemiluminescent ISH-PNA assay could thus represent a potent tool for the assessment of viral infections and for the quantitative evaluation of the virus nucleic acid load of infected cells in virus studies and diagnostics.     

A novel detection of hydrogen peroxide based on a luminescent polyoxometalate

In this paper, we attempt to construct a simple and sensitive detection method for hydrogen peroxide based on reversible colour change and luminescence switching modulated by the electrochemical stimulation and redox reaction of H(2)O(2) with electroreduced polyoxometalate. This method successfully combines the electrochromic and luminescent properties of the polyoxometalate to develop a novel detection method for H(2)O(2) with good reversibility, which displays high sensitivity, a wide linear range and a low detection limit to H(2)O(2).     

A stable chemiluminophore,adamantylideneadamantane 1,2-dioxetane: from fundamental properties to utilities in mechanochemistry and soft crystal science

Chemiluminescence (CL) is a luminescence phenomenon originated by a “chemical reaction.” CL provides a basis for real-time imaging technology in materials science. In fact, a CL reaction is easily triggered in general and makes it possible to track its progress in a target material by highly sensitive photon detection. Recently, real-time CL imagings became breakthrough techniques for analyzing the molecular mechanisms of failures of polymeric materials and of reactions and phase transitions in soft crystals. In the CL imaging techniques, adamantylideneadamantane 1,2-dioxetane (Adox) has been adopted as a stable core structure of chemiluminophores. That is, Adox is an essential seed compound to design a chemiluminophore with a desired molecular function. To support developments of real-time CL imaging techniques, we review the chemistry of Adox as a representative stable chemiluminophore including scientific history and utilities of Adox and its derivatives.     

Flow Injection Chemiluminescence Determination of Gentamycin Using On-Line Electrogenerated Co(III) As the Oxidant

ABSTRACT

A novel flow-injection Chemiluminescence (CL) system for the determination of gentamycin is described, based on the direct chemiluminescence reaction of gentamycin and Co(III) in sulfuric acid media. The unstable strongly oxidative Co(III) was electrogenerated on-line with constant current electrolysis. The chemiluminescence intensity was linear with gentamycin concentrations of 0.01～80μg/ml, the detection limit being 0.005μg/ml. The whole process could be completed in 1 min with a relative standard deviation of less than 3.2%. The proposed method is rapid and simple and is suitable for automatic and continuous analysis. This method has been applied satisfactorily to the analysis of gentamycin in pharmaceutical preparations.     

Analytical chemiluminescence and bioluminescence: latest achievements and new horizons

Chemiluminescence (CL) and bioluminescence (BL) are the detection techniques of choice for the development of highly sensitive analytical methods, from immunoassays and nucleic acid hybridization assays to whole-cell biosensors. Nevertheless, basic and applied research on CL and BL aimed at further improving their analytical performance is still very active. This research covers diverse and complementary fields, including (among others) enhancing the light emission efficiency of CL systems, the use of nanomaterials to catalyze or enhance CL/BL reactions, the study of BL proteins to elucidate the color modulation mechanism, the discovery of new BL systems, the production of thermostable BL protein mutants with altered emission spectra, the development of BL imaging techniques to expand our understanding of living systems, and the implementation of CL/BL detection in miniaturized analytical devices. In the near future, we expect even greater diffusion of CL/BL-based analytical methods, especially in portable analytical devices intended for applications ranging from environmental analysis to companion diagnostics for personalized medicine.     

High-performance liquid chromatography of aromatic compounds with photochemical decomposition and tris(2,2'-bipyridine)ruthenium(III) chemiluminescence detection

A novel high-performance liquid chromatographic method for the determination of aromatic compounds based on the on-line photochemical degradation and subsequent tris(2,2'-bipyridine)ruthenium(III) chemiluminescence detection has been developed. Chemiluminescence intensity depended upon the number of aromatic rings, UV irradiation time, and variety of substituted functional groups. One of the decomposition products of aromatic compounds by UV irradiation was identified as oxalic acid. As one application of this methodology, determination of catechins in tea has been shown. Calibration graphs, based on standard (-)-epicatechin and (-)-epigallocatechin gallate solutions, were linear over the range of 0.1-50 microM. The detection limits (signal-to-noise ratio=3) were 0.8 pmol for (-)-epigallocatechin gallate and 1.2 pmol for (-)-epicatechin. The high-performance liquid chromatography-chemiluminescence (HPLC-CL) detection method with a post-column photochemical reactor can be applied to the sensitive and selective determination of catechins in tea.     

Luminol-Based Chemiluminescent Signals: Clinical and Non-clinical Application and Future Uses

Chemiluminescence (CL) is an important method for quantification and analysis of various macromolecules. A wide range of CL agents such as luminol, hydrogen peroxide, fluorescein, dioxetanes and derivatives of oxalate, and acridinium dyes are used according to their biological specificity and utility. This review describes the application of luminol chemiluminescence (LCL) in forensic, biomedical, and clinical sciences. LCL is a very useful detection method due to its selectivity, simplicity, low cost, and high sensitivity. LCL has a dynamic range of applications, including quantification and detection of macro and micromolecules such as proteins, carbohydrates, DNA, and RNA. Luminol-based methods are used in environmental monitoring as biosensors, in the pharmaceutical industry for cellular localization and as biological tracers, and in reporter gene-based assays and several other immunoassays. Here, we also provide information about different compounds that may enhance or inhibit the LCL along with the effect of pH and concentration on LCL. This review covers most of the significant information related to the applications of luminol in different fields.     

Multiwell cartridge with integrated array of amorphous silicon photosensors for chemiluminescence detection: development,characterization and comparison with cooled-CCD luminograph

We propose a disposable multiwell microcartridge with integrated amorphous silicon photosensors array for bio- and chemiluminescence-based bioassays, where the enzymatic reactions and the detection unit are coupled on the same glass substrate. Each well, made in a polydimethylsiloxane (PDMS) unit, hosts an enzymatic reaction that is monitored by one photosensor of the array. Photosensors were characterized in terms of their dark current background noise and response to different wavelengths of visible light in order to determine their suitability as detection devices for chemical luminescent phenomena. Calibration curves of the photosensors’ response to different luminescent systems were then evaluated by using the chemiluminescent reactions catalyzed by alkaline phosphatase and horseradish peroxidase and the bioluminescent reaction catalyzed by firefly luciferase. Limits of detection in the order of attomoles for chemiluminescence enzymes and femtomoles for luciferase and sensitivities in the range between 0.007 and 0.1 pA pmol^?1 L were reached. We found that, without the need of cooling systems, the analytical performances of the proposed cartridge are comparable with those achievable with state-of-the-art thermoelectrically cooled charge-coupled device-based laboratory instrumentation. In addition, thanks to the small amount of generated output data, the proposed device allows the monitoring of long-lasting reactions with significant advantages in terms of data-storage needs, transmission bandwidth, ease of real-time signal processing and limited power consumption. Based on these results, the operation in model bioanalytical assays exploiting luminescent reactions was tested demonstrating that a-Si:H photosensors arrays, when integrated with PDMS microfluidic units, provide compact, sensitive and potentially low-cost microdevices for chemiluminescence and bioluminescence-based bioassays with a wide range of possible applications for in-field and point-of-care bio-analyses.     

A study of the chemiluminescence of some acidic triphenylmethane dyes

Chemiluminescence was observed when some acidic triphenylmethane dyes were oxidized with hydrogen peroxide in alkaline solution. Trace amounts of Co(II) catalysed this chemiluminescent reaction strongly, especially in the presence of the cationic surfactant cetyltrimethylammonium bromide. The chemiluminescence spectra of some compounds and the absorption spectra of some products of the chemiluminescent reactions were investigated, and some acidic triphenylmethane dyes were studied by the Hückel molecular orbital method. On the basis of these investigations, a possible mechanism for this chemiluminescent reaction, and an initial explanation for the relationship between the structure of the reagents and their chemiluminescent behaviour were proposed. The optimum conditions for use of some of the chemiluminescent reaction systems were selected by means of the modified simplex method, and a chemiluminescent analytical method for determination of ultratrace amounts of cobalt was established, with a detection limit of 5 pg/ml. It was used for analysis of natural water samples, and good results were obtained.     

Trace analysis of radioisotopes by laser spectroscopy and mass spectrometry

Trace analysis (at fg-level) of radioisotopes requires a considerable push in analytical technology. Among most sensitive are a Time-Resolved Laser-Induced Fluorescence (TRLIF) and Chemiluminescence (TRLIC) methods for detection of elemental compositions and valence states and a Resonance Ionisation Spectroscopy (RIS) in combination with mass spectrometry for isotope composition determination. The radioisotopes of interest in environmental radiochemistry and planetary science and their analysis using TRLIF/TRLIC/RIS are discussed. The aspects of the development of the new technology implementing these methods are also described.

     

Visualized uranium rapid monitoring system based on self-enhanced electrochemiluminescence-imaging of amidoxime functionalized polymer nanoparticles

The development of uranyl ion detection technology has exhibited its significance in public security and environmental fields for the radioactivity and chemical toxicity of uranyl ion. The WHO standard of uranyl ion makes it necessary to develop highly sensitive uranyl rapid warning system in drinking water monitoring. Herein, a visualized rapid warning system for trace uranyl ion is carried out based on electrochemiluminescence (ECL) imaging technology to give an ultra-low limit of detection (LOD) and high selectivity. Amidoxime, a bi-functional group with both uranyl ion capturing and co-reactive functions, is modified on a conjugated polymer backbone with strong ECL signal to be prepared into three-in-one polymer nanoparticles (PNPs) with self-enhanced ECL property. The captured uranyl ion can enhance the ECL signal of PNPs via resonance energy transfer process to give the LOD as 0.5 ng/L, which is much lower than the known luminescent uranyl sensors. Furthermore, ECL imaging technology is introduced into realizing visualized uranyl rapid warning, and can be successfully applied on natural water samples. This study provides a novel strategy for uranyl rapid warning, and shows its potential meaning in public security and environmental fields.     

毛细管电泳化学发光在线检测

评论了毛细管区带电泳化学发光检测联用技术这一新兴的研究领域。化学发光检测具有背景低、热力学范围宽、灵敏度高的优点，适于毛细管电泳柱后微量样品的在线检测。论述了该检测器与毛细管电泳联用的接口和应用状况。     

Turn‐On Luminescent Probes for the Real‐Time Monitoring of Endogenous Hydroxyl Radicals in Living Cells

The utilization of semiconductor quantum dots (QDs) as optical labels for biosensing and biorecognition has made substantial progress. However, the development of a suitable QD‐based luminescent probe that is capable of detecting individual reactive oxygen species (ROS) represents a great challenge, mainly because the fluorescence of QDs is quenched by a wide variety of ROS. To overcome this limitation, a novel QD‐based turn‐on luminescent probe for the specific detection of ^.OH has been designed, and its application in monitoring the endogenous release of ^.OH species in living cells is demonstrated. Metal citrate complexes on the surfaces of the QDs can act as electron donors, injecting electrons into the LUMO of the QDs, while ^.OH can inject holes into the HOMO of the QDs. Accordingly, electron–hole pairs are produced, which could emit strong luminescence by electron–hole recombination. Importantly, this luminescent probe does not respond to other ROS.     

Development of a chemiluminescence ethanol sensor based on nanosized ZrO2

Chemiluminescence was observed on introducing ethanol vapor to the surface of nanosized ZrO2 and this effect could be utilized to design a sensor for trace ethanol detection. The term cataluminescence (CTL) was used to describe this kind of chemiluminescence because the luminescence is generated by the catalytic oxidation of organic vapors on the solid surface. The proposed sensor showed high sensitivity to ethanol at 195 degrees C. The stability of the gas sensor was demonstrated by continuous reaction with ethanol for 100 h. Quantitative analysis was performed at an optimum wavelength of 460 +/- 10 nm. The chemiluminescence intensity was proportional to the concentration of ethanol from 1.6 to 160 microg ml(-1), with a detection limit of 0.6 microg ml(-1) (signal-to-noise ratio = 3:1). The mechanism of the chemiluminescence reaction is discussed and the results show that one of the possible luminescent intermediates is acetaldehyde. The chemiluminescence on nanosized ZrO2 observed in this work demonstrates the possibility of developing new nanomaterials for low-temperature cataluminescence detection.     

Serial potentiometric and conductometric detection in fast non-suppressed ion chromatography applied to the analysis of filter collected airborne particulates

Non-suppressed ion chromatography (NSIC) has been optimized to permit the determination of chloride, nitrate and sulfate in the low mg/l concentration range within 3 min. Using conductometric detection the extraneous (positive) injection peak was found to adversely affect the early eluting chloride signal when samples with high amounts of total cations are analyzed. The serial arrangement of a downstream potentiometric detector with a chloride ion selective electrode, which does not respond to other alterations of the composition of the eluent than the change in chloride concentrations, is shown to be suitable for interference-free, sensitive and reliable chloride evaluation. Application of the proposed system to the determination of chloride in extracts of filter collected airborne particulates revealed (for those samples that could be evaluated by both detection methods) high precision and no systematic deviations between conductometric and potentiometric detection.     

毛细管电泳与化学发光检测联用方法的研究进展

毛细管电泳由于其超高的分离效率广泛应用于生物医药、环境监测、食品科学以及公共安全等领域。然而,由于毛细管电泳具有进样量较少、检测光程较短等缺点,需要与高灵敏度检测器联用实现低浓度样品的分析。化学发光检测由于其背景信号低而具有超高的灵敏度。毛细管电泳-化学发光检测联用方法将毛细管电泳的高效分离特性与化学发光检测的高灵敏性相结合,成为一种非常重要的分析方法,广泛用于化学分析、药物筛选以及环境监测等领域。该文对近年来毛细管电泳-化学发光检测联用方法的基本原理进行概述,并对其发展趋势和应用前景进行了展望。     

Chemiluminescence during the oxidation of alcohols by permanganate: application to the determination of ethanol in gin

Chemiluminescence is observed during the oxidation of ethanol with potassium permanganate under very acidic conditions. Factors affecting the chemiluminescence signal are discussed. Based on this chemiluminescence reaction, a method for the determination of alcohol in gin was developed. The method, which has a detection limit of 0.3% (v/v) and a relative standard deviation of about 1% at 40.0% (v/v), was used in the determination of ethanol in three different brands of gin with no sample preparation.