Synthesis of Methyl α-D-Kijanoside

Abstract

In 1981, Mallams and coworkers reported¹ the discovery of - D-kijanose 1, a branched-chain nitro sugar, isolated from the antitumor antibiotic kijanimicin by acid hydrolysis. The structure of this unusual carbohydrate was established ^1,2 as 2,3,4,6-tetadeo xy-4 - (methoxy carbony1 amino 1-3-c-methyl - 3 -nitro - D-xylo-hexopyranose by spectroscopic and crystallographic analysis, and comparison with D-rubranitrose 2, a carbohydrate found in the antibiotic rubradirin .³Two other nitro sugars, L-evernitrose 3 and - L-decilonitrose 4⁵, have been discoveredas components of antibiotics.     

Synthesis of Methyl α-d-Allopyranoside and Methyl α-d-Ribo-hexopyranoside: A Convenient Chemoenzymatic Approach

Abstract

An efficient chemoenzymatic synthesis of methyl α-d-allopyranoside and methyl 3-deoxy-α-d-ribo-hexopyranoside starting from methyl 4,6-O-benzylidene-α-d-glucopyranoside is described.     

Synthesis Characterization and Viscosity Studies of Homopolymer of Methyl Methacrylate and Copolymer of Methyl Methacrylate and Styrene

A homopolymer of methyl methacrylate (MMA) and its copolymer with styrene at different compositions were synthesized and characterized. Viscosity measurements of the synthesized homopolymer and the copolymers in toluene solutions were performed at 313 K. Different equations were used to calculate the intrinsic viscosity, viscometric constants values, and molecular weight of the synthesized polymers. The values of intrinsic viscosity and viscosity average molecular weight obtained by the two methods (single point determination and graphical extrapolation) were compared in order to verify the validity of the single point determination for the polymers. Viscometric properties derived included the specific viscosity (it determines the contribution of the solute to the viscosity of the solution), the reduced viscosity (that provides a measure of the polymer capacity for increasing the solution viscosity), and the intrinsic viscosity.     

Studies on the Mechanism of Methyl Methacrylate Polymerization Initiated by Volatile and Nonvolatile Products of Methyl Methacrylate Plasma

ＳｔｕｄｉｅｓｏｎｔｈｅＭｅｃｈａｎｉｓｍｏｆＭｅｔｈｙｌＭｅｔｈａｃｒｙｌａｔｅＰｏｌｙｍｅｒｉｚａｔｉｏｎｉｎｉｔｉａｔｅｄｂｙＶｏｌａｔｉｌｅａｎｄＮｏｎｖｏｌａｔｉｌｅＰｒｏｄｕｃｔｓｏｆＭｅｔｈｙｌＭｅｔｈａｃｒｙｌａｔｅＰｌａｓｍａＬＩＵ...     

Phase Transfer Catalysed Synthesis of Methyl α-Bromomethylacrylate

Methyl α-bromomethylacrylate 1 is an important intermediate both as a starting material for specifically functionalized polymers and for use in general organic synthesis. As an example of the former it has been used to prepare polymeric anthraquinoid dyes¹. Synthetically, its bifunctional reactivity towards nucleophilic attack has made it useful in the preparation of both spiro² and bicyclic^3,4 ring systems. Several reports of synthetic methods leading to α-methylenelactones, having potential antitumor activity, have also been reported which use α-bromomethylacrylate as a starting point⁵.     

Properties of Methacrylic Acid–Methyl Acrylate Copolymers of Varied Structure

Physicomechanical and surface properties of films of copolymers of methacrylic acid with methyl acrylate, which have close compositions and molecular masses (M_n ≈ 5.7 × 10⁴) and various chain structures (gradient copolymer and statistical copolymer), were studied. The thermodynamic characteristics of the copolymers were determined; two glass-transition points (29.6 and 141.0°C) were found for the gradient copolymer, and one glass-transition point of 40.1°C, for the copolymer with a statistical distribution of units along the chain. It was found that more mechanically strong films with tensile stress of 2.8 MPa are characteristic of the gradient copolymer. The wetting method was used to determine by using the Hood–Kaelble–Dann–Fowkes approach the surface Gibbs energies of the films and their polar and dispersion components. Atomic-force microscopy was used to find heterogeneities (0.1–0.3 μm) on the surface of a film of a statistical copolymer, whereas the film of a gradient polymer has a homogeneous structure.     

Gamma radiolysis of Methyl Red solution and reaction induced by γ-irradiated NaCl in Methyl Red

The -radiolysis of Methyl Red solution in HCl medium at pH=2 has been studied along with energy transfer reaction brought about byF and hole centers of -irradiated NaCl. The G-values for degradation of the azo dye indicator by radiolysis and -irradiated salt were determined as 9·10^–1 and 4.8·10^–3, respectively. The kinetic rate constants (k) of degradation are evaluated as 2·10^–5 rad^–1 in the case of direct radiolysis, while for the irradiated salt it is 2·10^–7 rad^–1. The extent of degradation by direct -radiolysis is 100–200 times greater as compared to that by the -irradiated salt. The same mechanism is proposed for radiolysis as well as the reaction induced by -irradiated sodium chloride.     

Stereocontrolled Conversion of Allylic Alcohols Into Vicinal Cis-Diols: New Syntheses of Methyl α-L-Digitoxoslde and Methyl 2-Deoxy-α-L-Fucoside

A synthetic process is outlined in which an allylic alcohol is converted into its primary urethane derivative, which is then subjected to iodonium ion induced cyclization to give a single iodo-carbonate. The carbonate is then deiodinated reductively and hydrolyzed to afford the vicinal diol. By use of this process the two title sugars have been prepared from methyl 2.3.6-trideoxv-α-L-ervthro-hex-2-enopvranoside and its α-L-threo counterpart.     

Acylation of Fischer’s Base with Methyl Aroylpyruvates

Methyl (Z)-4-aryl-2-hydroxy-4-oxobut-2-enoates (methyl aroylpyruvates) reacted with 1,3,3-trimethyl- 2-methylidene-2,3-dihydro-1H-indole (Fischer’s base) to give (2Z,5E)-1-aryl-3-hydroxy-5-(1,3,3-trimethyl-2,3-dihydro-1H-indol-2-ylidene)pent-2-ene-1,4-diones.     

The Exceptional Diversity of Homoleptic Uranium–Methyl Complexes

Homoleptic σ-bonded uranium–alkyl complexes have been a synthetic target since the Manhattan Project. The current study describes the synthesis and characterization of several unprecedented uranium–methyl complexes. Amongst these complexes, the first example of a homoleptic uranium–alkyl dimer, [Li(THF)₄]₂[U₂(CH₃)₁₀], as well as a seven-coordinate uranium–methyl monomer, {Li(OEt₂)Li(OEt₂)₂UMe₇Li}_n were both crystallographically identified. The diversity of complexes reported herein provides critical insight into the structural diversity, electronic structure and bonding in uranium–alkyl chemistry.     

Crystalline Methyl β-L-Pfamnofuranqside From Fischer Glycqsidatiok of L-Rhamnose

Flash chromatography of the mixture obtained by reaction of L-rhamnose with methanol in the presence of cation-exchange resin, in addition to methyl α-L-rhamnofuranoside (3) and methyl rhamnopyranosides 1 and 2 gave methyl β-L-rhamnofuranoside (4) in 8% yield. ¹³C and ¹H NMR spectra of 3 and 4 as well as their calculated conformation in solution are discussed.     

Synthesis of Copolymers of Unsaturated β-Diketones with Styrene and Methyl Methacrylate

Copolymerization of styrene and methyl methacrylate with various unsaturated -diketones was studied. The influence exerted by the reaction temperature, structure of -diketone, and its content in the comonomer mixture on the kinetic parameters of copolymerization and molecular weights of the products was examined.     

Monitor of Polymerization of Inverse Microemulsions Containing Methyl Methacrylate and Acrylic Acid

Microemulsions are isotropic, optically transparent and thermodynamically stabledispersion systems consisting of water, oil and suitable surfactants. Polymerization inmicroemulsions has been widely studied since 1980s, which can be divided intooil-in-wate…     

Crystal Structures of Methyl (Methyl 3-azido-2,3-dideoxy-β-L-lyxo- and -β-D-arabino-hexopyranosid)uronates

Single-crystal x-ray diffraction data for methyl (methyl 3-azido-2,3-dideoxy-β-L-lyxo- and β-D-arabino-hexopyranosid)uronates are presented. Three independent molecules in the asymmetric part of the unit cell of the β-D-arabino stereoisomer were found. These differ slightly in the geometry of the groups bound to the pyranose rings. Conformations and the geometry parameters of all the molecules as well as the planarity of the carbomethoxy group, the linearity of the azido group, and the orientation of the aglycone in the crystal lattice are discussed. Influence of the hybridization, resonance, and crystal packing on the geometry parameters is shown.     

Aerobic Oxidation of Methyl Vinyl Ketone in Supercritical Carbon Dioxide

Ｔｈｅａｅｒｏｂｉｃｏｘｉｄａｔｉｏｎｏｆｅｔｈｙｌｅｎｅｔｏａｃｅｔａｌｄｅｈｙｄｅａｎｄｔｅｒｍｉｎａｌｏｌｅｆｉｎｓｔｏｃｏｒｒｅｓｐｏｎｄｉｎｇａｌｋａｎ 2 ｏｎｅｓｃａｔ ａｌｙｚｅｄｂｙｐａｌｌａｄｉｕｍ(ＩＩ)ａｎｄｃｏｐｐｅｒ(ＩＩｏｒＩ)ｓａｌｔｓａｒｅｃｏｌ ｌｅｃｔｉｖｅｌｙｋｎｏｗｎａｓＷａｃｋｅｒｏｘｉｄａｔｉｏｎｓ (Ｓｃｈｅｍｅ 1) .1Ｔｈｅｙａｒｅｖｅｒｙｉｍｐｏｒｔａｎｔｉｎｂｏｔｈｓｙｎｔｈｅｔｉｃａｎｄｉｎｄｕｓｔｒｉａｌｃｈｅｍ ｉｓｔｒｙ .Ｔｒｅａｔｍｅｎｔｏｆｔ…     

Novel Synthesis of Benzotriazol-1-yl Methyl Selenides and Tellurides

Benzotriazole has played an important role as a synthetic auxiliary for preparative chemists1. It is also well known that organic selenides or tellurides are versatile intermediates in organic synthesis2. However, there are only few reports on the synthesis of the difunctionalized compounds containing both benzotriazolyl group and organoselenium or tellurium group3. Herein we wish to report a new and convenient synthesis of benzotriazol-1-yl methyl selenides and tellurides 4a-h.Selenium or tel…     

Direct and Convenient Method of Regioselective Benzylation of Methyl α‐D‐Glucopyranoside

A facile and convenient method for the direct preparation of methyl 2,3,6‐tri‐O‐benzyl‐α‐D‐glucopyranoside (2) by the regioselective benzylation of methyl α‐D‐glucopyranoside (1) with benzyl bromide in the presence of mild bases K₂CO₃ and KOH (1∶1) without solvents is reported.     

The physicochemical properties and solubility of pharmaceuticals – Methyl xanthines

The aim of this study was to evaluate the physio-chemical properties and solubility of three pharmaceuticals (Phs): theophylline, 7-(β-hydroxyethyl) theophylline, and theobromine in binary systems in different solvents. The solvents used were water, ethanol, and 1-octanol. Score of the solubility of these substances is being important for their dissolution effect inside the cell, the transportation by body fluids and the penetration possibility of lipid membranes.The Phs were classified to the group of methyl xanthines, which contain purine in their structure. Although they are mainly obtained via chemical synthesis, they can be also found in natural ingredients such as cocoa beans and tea leaves. These drugs are mainly acting on the central nervous system but are also used in the treatment of asthma or blood vessels.Solubility of 7 (β-hydroxyethyl) theophylline and theophylline were tested using synthetic method. In case of theobromine, which solubility is very small in the solvents noted, the spectrophotometric method has been used to measure its solubility. After designating phase diagrams of each of the solubility in the bipolar system, the experimental points have been correlated with the equations: Wilson, NRTL, UNIQUAC. Results show that theophylline and its derivatives show the best solubility from all tested Phs.Another method also used during this study was the differential scanning calorimetry (DSC), which allowed designation of the thermal properties of Phs. The fusion temperature and the enthalpy of melting were measured. Unfortunately, it was not possible to determine the fusion temperature and enthalpy of melting of theobromine, because of the decomposition of Ph at high temperature.The important property tested was the constant acidity, to this end, the spectrophotometric method of Bates–Schwarzenbach was used. Unfortunately, with this method it was not possible to determine the value of pK_a 7-(β-hydroxyethyl) theophylline. For other Phs, these values do not differ significantly from those proposed in the literature.Both awareness and knowledge of values of the drug pK_a and solubility are important in Phs production. This allows the selection of a suitable solvent and allows estimation of the correct dose and its capacity to absorb in human body.     

Polymerization of Methyl Methacrylate in the Presence of N-Acetyl-ε-aminocaproic Acid Acetylamide

The effect of N-acetyl--aminocaproic acid acetylamide on radical polymerization of methyl methacrylate initiated with lauroyl peroxide was studied.