Conformational stability, r0 structural parameters, and vibrational assignments of mono-substituted cyclobutanes: fluorocyclobutane

Variable temperature (-55 to -100°C) studies of the infrared spectra (3500-400 cm(-1)) of fluorocyclobutane, c-C(4)H(7)F, dissolved in liquid xenon have been carried out as well as the infrared spectra of the gas. By utilizing eight pairs of conformers at 10 different temperatures, the enthalpy difference between the more stable equatorial conformer and the axial form has been determined to be 496±40 cm(-1) (5.93±0.48 kJ/mol). The percentage of the axial conformer present at ambient temperature is estimated to be 8±1%. The ab initio MP2(full) average predicted energy difference from a variety of basis sets is 732±47 cm(-1) (9.04±0.44 kJ/mol) and the average value of 602±20 cm(-1) from density functional theory predictions by the B3LYP method are significantly larger than the experimentally determined enthalpy value. By utilizing previously reported microwave rotational constants for the equatorial and axial conformers combined with ab initio MP2(full)/6-311+G(d,p) predicted structural values, adjusted r(0) parameters have been obtained. The determined heavy atom structural parameters for the equatorial [axial] conformer are: distances (?) C-F=1.383(3) [1.407(3)], C(α)-C(β)=1.543(3) [1.546(3)], C(β)-C(γ)=1.554(3) [1.554(3)] and angles (°) ∠C(α)C(β)C(γ)=85.0(5) [89.2(5)], ∠C(β)C(α)C(β)=89.3(5) [89.2(5)], ∠F-(C(β)C(α)C(β))=117.4(5) [109.2(5)] and a puckering angle of 37.4(5) [20.7(5)]. The conformational stabilities, harmonic force fields, infrared intensities, Raman activities, depolarization ratios and vibrational frequencies have been obtained for both conformers from MP2(full)/6-31G(d) ab initio calculations and compared to experimental values where available. The results are discussed and compared to the corresponding properties of some other monosubstituted cyclobutanes with halogen and pseudo-halogen substituents.     

Synthesis and structural characterization of nonanuclear lanthanide complexes

A series of nonanuclear lanthanide oxo-hydroxo complexes of the general formula [Ln(9)(mu(4)-O)(2)(mu(3)-OH)(8)(mu-BA)(8)(BA)(8)](-)[HN(CH(2)CH(3))(3)](+).(CH(3)OH)(2)(CHCl(3)) (BA = benzoylacetone; Ln = Sm, 1; Eu, 2; Gd, 3; Dy, 4; Er, 5) were prepared by the reaction of hydrous lanthanide trichlorides with benzoylacetone in the presence of triethylamine in methanol and recrystallized from chloroform/methanol (1:10) at room temperature. These five compounds are isomorphous. Crystal data for 1: cubic, Pn3n; T = 180 K; a = 33.8652(4) A; V = 38838.4(8) A(3); Z = 6; D(calcd) = 1.125 g cm(-)(3); R1 = 3.37%. Crystal data for 2: cubic, Pn3n; T = 180 K; a = 33.8252(8) A; V = 38700.9(16) A(3); Z = 6; D(calcd) = 1.133 g cm(-)(3); R1 = 4.97%. Crystal data for 3: cubic, Pn3n; T = 180 K; a = 33.7061(6) A; V = 38293.5(12) A(3); Z = 6; D(calcd) = 1.157 g cm(-)(3); R1 = 5.13%. Crystal data for 4: cubic, Pn3n; T = 180 K; a = 33.5900(7) A; V = 37899.2(14) A(3); Z = 6; D(calcd) = 1.182 g cm(-)(3); R1 = 4.03%. Crystal data for 5: cubic, Pn3n; T = 180 K; a = 33.5054(8) A; V = 37613.6(16) A(3); Z = 6; D(calcd) = 1.202 g cm(-)(3); R1 = 4.86%. The core of the anionic cluster comprises two vertex-sharing square-pyramidal [Ln(5)(mu(4)-O)(mu(3)-OH)(4)](9+) units. The compounds were characterized by elemental analysis, IR, fast atom bombardment mass spectra, thermogravimetry, and differential scanning calorimetry. The thermal analysis indicated that the nonanuclear species were stable up to 150 degrees C. Luminescence spectra of 2 and magnetic properties of 1-5 were also studied.     

Improved accuracy for Raman spectroscopic determination of polyethylene property by optimization of measurement temperature and elucidation of its origin by multiple perturbation two-dimensional correlation spectroscopy

A novel strategy is demonstrated to improve the accuracy for determination of polyethylene (PE) density using Raman spectroscopy by optimizing the temperature of sample measurement. Spectral features associated with the conformation change of the polymer induced by temperature may provide valuable information to quantify important polymer properties such as density. To evaluate possible existence of an optimal temperature providing improved quantitative accuracy, Raman spectra of PE pellets with different densities were collected at eight different temperatures from 30 to 100 °C at 10 °C intervals. Using the spectral datasets collected at each temperature, partial least squares (PLS) models were developed using the reference PE density values determined by a standard density gradient method at 23 °C. Interestingly, the most accurate determination of density was realized at 70 °C. Multiple perturbation two-dimensional (MP2D) correlation analysis and differential scanning calorimetry (DSC) were used to examine the origin of improved accuracy at 70 °C. From these analyses, the pre-melt behavior of the PE samples was identified below their melting temperatures. Structural variations induced at the pre-melt stages enhance Raman spectral selectivity among the samples, thereby providing more accurate determination of PE density. The MP2D correlation analysis revealed the unforeseen thermal behavior of PE samples and successfully explained the improved accuracy at 70 °C.     

Thermodynamic investigations of methyl tert-butyl ether and water mixtures

Interactions between methyl tert-butyl ether (MTBE) and water have been investigated by scanning calorimetry, isothermal titration calorimetry, densitometry, IR-spectroscopy, and gas chromatography. The solubilization of MTBE in water at 25 °C at infinite dilution has ΔH° = -17.0 ± 0.6 kJ mol(-1); ΔS° = -80 ± 2 J mol(-1) K(-1); ΔC(p) = +332 ± 15 J mol(-1) K(-1); ΔV° = -18 ± 2 cm(3) mol(-1). The signs of these thermodynamic functions are consistent with hydrophobic interactions. The occurrence of hydrophobic interaction is further substantiated as IR absorption spectra of MTBE-water mixtures show that MTBE strengthens the hydrogen bond network of water. Solubilization of MTBE in water is exothermic whereas solubilization of water in MTBE is endothermic with ΔH° = +5.3 ± 0.6 kJ mol(-1). The negative mixing volume is explained by a large negative contribution due to size differences between water and MTBE and by a positive contribution due to changes in the water structure around MTBE. Henry's law constants, K(H), were determined from vapor pressure measurements of mixtures equilibrated at different temperatures. A van't Hoff analysis of K(H) gave ΔH(H)° = 50 ± 1 kJ mol(-1) and ΔS(H)° = 166 ± 5 J mol(-1) K(-1) for the solution to gas transfer. MTBE is excluded from the ice phase water upon freezing MTBE-water mixtures.     

Changes in morphology and activity of transglutaminase following cross-linking and immobilization on a polypropylene microporous membrane

Transglutaminase (TGase) was cross-linked with glutaraldehyde, and cross-linked crystalline transglutaminase was immobilized on a polypropylene microporous membrane by UV-induced grafting. Immobilized enzyme activity were calculated to be 0.128 U/cm2 polypropylene microporous membrane. The microstructure and enzyme characteristics of free, cross-linked and immobilized transglutaminase were compared. The optimum temperature of free transglutaminase was determined to be approximately 40 °C, while cross-linking and immobilization resulted in an increase to approximately 45 °C and 50 °C. At 60 °C, immobilized, cross-linked and free transglutaminase retained 91.7 ± 1.20%, 63.2 ± 1.05% and 37.9 ± 0.98% maximum activity, respectively. The optimum pH was unaffected by the state of transglutaminase. However, the thermal and pH stabilities of cross-linked and immobilized transglutaminase were shown to increase.     

Attenuated total reflection infrared microspectroscopy combined with multivariate analysis: a novel tool to study the presence of cocoa polyphenol metabolites in urine samples

The detection and quantification of polyphenols in biological samples is mainly performed by liquid chromatography in tandem with mass spectrometry (HPLC-MS/MS). This technique requires the use of organic solvents and needs control and maintenance of several MS/MS parameters, which makes the method expensive and time consuming. The main objective of this study was to evaluate, for the first time, the potential of using attenuated total reflection infrared microspectroscopy (ATR-IRMS) coupled with multivariate analysis to detect and quantify phenolic compounds excreted in human urine. Samples were collected from 5 healthy volunteers before and 6, 12 and 24 h after ingestion of 40 g cocoa powder with 250 mL of water or whole milk, and stored at -80 °C. Each sample was centrifuged at 5000 rpm for 10 min and at 4 °C and applied onto grids of a hydrophobic membrane. Spectra were collected in the attenuated total reflection (ATR) mode in the mid-infrared region (4000-800 cm(-1)) and were analyzed by a multivariate analysis technique, soft independent modeling of class analogy (SIMCA). Spectral models showed that IR bands responsible for chemical differences among samples were related to aromatic rings. Therefore, ATR-IRMS could be an interesting and straightforward technique for the detection of phenolic compounds excreted in urine. Moreover, it could be a valuable tool in studies aimed to identify biomarkers of consumption of polyphenol-rich diets.     

Impact of the Spacer on the Condensing Effect of Fluorinated Chains Investigated by Grazing Incidence X-ray Diffraction on Ultrathin Langmuir Monolayers

Langmuir monolayers of double perfluoroalkyl(alkyl) chain amphiphiles fitted with a monomorpholinophosphate polar head, [C(n)F(2n+1)(CH(2))(m)O](2)P(O)[N(CH(2)CH(2))(2)O] (di(FnHm)MP with n = 6, 8, or 9; and m = 1 or 2), were investigated by surface pressure (π)/molecular area (A(0)) compression isotherms for temperatures ranging from 15 to 50 °C, and by grazing-incidence X-ray diffraction (GIXD) at 25 °C. Ultrathin monolayers were obtained for these short surfactants. Though the hydrocarbon spacer is short, it has a remarkable impact on the monolayer's organization. At 25 °C, whereas di(F8H2)MP monolayer presents a liquid expanded (LE)/liquid condensed (LC) transition, simply replacing one CH(2) by a CF(2) in the latter compound's structure at constant chain length, i.e. shortening the spacer from 2 to 1 CH(2) (as in di(F9H1)MP), suppresses the LE phase. At 25°, GIXD established that for both di(F8H2)MP and di(F9H1)MP, the chains form an hexagonal lattice in the LC phase. The collective tilt of the two compounds is close to zero. The lattice of the dense phase can be compressed, as assessed by the continuous linear decrease of the d spacing with increasing pressure. This indicates that the azimuthal distribution of the molecular tilts is progressively reduced upon compression. The d value for di(F9H1)MP is significantly lower than that of di(F8H2)MP, providing evidence for strong condensing effect of the fluorinated chains. Molecular areas were determined directly from the compression curves and also from the X-ray data, the latter allowing reconstruction of the compression isotherms. The calculated lattice compressibilities are ～30% and 50% of the macroscopic compressibilities for di(F9H1)MP and di(F8H2)MP, respectively. Comparison with the experimentally determined isotherms shows that the monolayer of di(F9H1)MP is more stable than that of di(F8H2)MP. The enthalpies and entropies determined for di(F9H1)MP and di(F8H2)MP, derived from the Clausius-Clapeyron equation, confirm that the observed transitions are both of the LE/LC type, although the triple point temperatures are strikingly different (27 °C vs -18 °C); this large difference further illustrates the stabilizing effect of the fluorinated chains. Disorder is hindered by the fluorinated chains and facilitated by a hydrocarbon spacer when larger than 1 CH(2).     

Theoretical Studies on the Coplanar Dicage Pentaprismane C16H12

1 INTRODUCTION A series of hydrocarbons of polyhedral shapes or cages, such as cubane and dodecahrane[1], have been synthesized. Each of these molecules has only one cage. It is well known that every carbon atom can form four bonds with other atoms, and …     

Simultaneous determination, by capillary zone electrophoresis, of multiple components of different industrial products

Summary Four parabens (esters of 4-hydroxybenzoic acid), effective preservatives against the growth of bacteria, yeast, and mold in numerous industrial products, have been used in this work as model compounds to demonstrate the resolving power of capillary electrophoresis (CE). The simultaneous determination of methyl-(MP), ethyl-(EP), propyl-(PP), and butylparaben (BP) was achieved by capillary zone electrophoresis (CZE) with UV diode-array detection at 294 nm. When run voltage, temperature, and electrolyte concentration and pH were optimized the most effective separation was achieved within 7 min by use of 50 cm (effective length) fused silica capillary tubing and operation at 25kV and 20°C. Background electrolyte comprising 35 mM tetraborate buffer adjusted to pH 10.0 gave the best results. The limits of detection of the optimized method ranged from 0.65 μg mL⁻¹ for BP to 0.81 μg mL⁻¹ for MP; the relative standard deviation was between 0.35 and 0.50%. These results showed that the method enables the determination of the four parabens in commerially available cosmetic and pharmaceutical preparations containing some of the parabens and in an unidentified canned berry fruit juice.     

Conformational stability from variable-temperature infrared spectra of xenon solutions, r0 structural parameters, and vibrational assignment of pyrrolidine

The infrared spectra of gaseous and variable-temperature liquid xenon solutions of pyrrolidine have been recorded. The enthalpy difference has been determined to be 109 ± 11 cm(-1) (1.30 ± 0.13 kJ mol(-1)) with the envelope-equatorial conformer more stable than the twist form with 37 ± 3% present at ambient temperature. Ab initio calculations utilizing various basis sets up to MP2(full)/aug-cc-pVTZ have been used to predict the conformational stabilities, energy at the equatorial-axial saddle point, and barriers to planarity. From previously reported microwave rotational constants along with MP2(full)/6-311+G(d,p) predicted structural values, adjusted r(0) parameters have been obtained for both conformers. Heavy atom distances (?) of equatorial[twist] conformer are as follows: N(1)-C(2) = 1.469(3)[1.476(3)], N(1)-C(3) = 1.469(3)[1.479(3)], C(2)-C(4) = 1.541(3)[1.556(3)], C(3)-C(5) = 1.541(3)[1.544(3)], C(4)-C(5) = 1.556(3)[1.543(3)]; and angles (deg)∠N(1)C(2)C(4) = 102.5(5)[107.6(5)], ∠N(1)C(3)C(5) = 102.5(5)[105.4(5)], ∠C(2)C(4)C(5) = 104.3(5)[104.6(5)], ∠C(3)C(5)C(4) = 104.3(5)[103.7(5)], ∠C(2)N(1)C(3) = 104.1(5)[103.9(5)], τC(2)C(4)C(5)C(3) = 0.0(5)[13.5(5)]. A complete vibrational assignment is proposed for both conformers.     

Popular theoretical methods predict benzene and arenes to be nonplanar

Planar (D6h) benzene has one (1181i cm-1, b2g) and three (1844i cm-1, b2g; 462i cm-1, e2u) imaginary vibrational frequencies at the MP2/6-311++G(d,p) and MP2/6-311++G levels of theory, respectively! The spurious frequencies correspond to D3d chair (b2g) and C2v boat (e2u) out-of-plane distortions. Numerous, similar examples where planar benzene is not a minimum are documented at the MP2, MP3, and CISD levels with popular Pople-type basis sets, while the RHF, B3LYP, and BLYP methods exhibit no such problems. We show that, in the sp and spd atomic-orbital limits of MP2 theory, benzene is nonplanar. The observed failure of electron correlation methods with unbalanced basis sets to predict planar minima is not unique to benzene but is also found for other pi-delocalized molecules, including pyridine, naphthalene, anthracene, the cyclopentadienyl and indenyl anions, and the tropylium cation. Detailed mathematical analysis reveals that an insidious, geometry-dependent, two-electron basis set incompleteness error (BSIE) is responsible for the problem and that balanced, correlation-consistent constructions of basis sets are generally required to ensure reliable predictions for arenes with correlated wave functions.     

A new optimization strategy for gaseous phase sampling by an internally cooled solid-phase microextraction technique

This study describes a new optimization strategy for internally cooled solid-phase microextraction based on a multivariate approach. The coating temperature was changed in an extraction while manipulating the extraction times to improve the extraction of compounds with different volatilities. Polycyclic aromatic hydrocarbons (PAHs) and phthalic acid esters (PEs) and adipate were used as model compounds in this study. The optimization strategy was in two steps: (1) multivariate optimization of extraction time and initial coating temperature and (2) multivariate optimization of total extraction time and the time required to cool the coating to a lower temperature as determined in step 1. The observed analytical response in relation to the coating temperature was found to be dependent on the analyte volatility and size. The optimized extraction condition for PEs was 23 min extraction while maintaining the coating at 140°C, followed by 7 min of cooling the coating at 10°C. For the PAHs the coating temperature was maintained at 60°C for the first 20 min and at 5°C in the last 20 min of extraction. Comparisons have been made between the proposed optimized conditions with the conventional internally cooled fiber approach and the results thoroughly discussed. The proposed optimization strategy was found to be more effective for all the analytes, especially for the semi-volatiles, compared to the conventional method.     

Screening of drug metabolism by CE

The use of CE for rapid assessment of metabolic stability of drugs with cytochrome P450 (CYP) enzymes, based on relative rates of reduced nicotinamide adenine dinucleotide phosphate (NADPH) consumption and nicotinamide adenine dinucleotide phosphate (NADP) production, was investigated. The separation conditions were as follows: capillary, 80.5 cm (75 microm id, 72 cm effective length for UV detection, 58 cm effective length for fluorescence detection); 25 mM sodium phosphate buffer (pH 8.8); 28 kV (80 microA) applied voltage; UV, 260 nm; fluorescence detection, excitation wavelength, 310 nm, emission wavelength, 418 nm; capillary temperature, 25 degrees C. For UV detection, the incubation conditions were as follows: CYP3A4: 20 pmol/mL; NADPH: 1 mM; EDTA: 1 mM; concentration of the substrate: 5-10 times its reported literature K(m) value; temperature: 37 degrees C; incubation time: 15 min. For fluorescence detection, the concentrations were reduced to CYP3A4: 4 pmol/mL, NADPH: 20 microM, EDTA: 20 microM and substrate: 10 microM. Blank incubations were performed in the absence of substrate. Compared with the blank, significant differences were found for the consumption of NADPH and the production of NADP. The development of this assay system allows rapid assessment of metabolic stability relative to standard compounds, as well as potential identification of the major CYP involved in the metabolism. It would reduce the backlog of compounds that require LC/MS analysis, and thereby expedite the process of metabolic stability screening.     

Microwave, infrared and Raman spectra, r0 structural parameters, ab initio calculations and vibrational assignment of 1-fluoro-1-silacyclopentane

The microwave spectrum (6500-18 ,500 MHz) of 1-fluoro-1-silacyclopentane, c-C(4)H(8)SiHF has been recorded and 87 transitions for the (28)Si, (29)Si, (30)Si, and (13)C isotopomers have been assigned for a single conformer. Infrared spectra (3050-350 cm(-1)) of the gas and solid and Raman spectrum (3100-40 cm(-1)) of the liquid have also been recorded. The vibrational data indicate the presence of a single conformer with no symmetry which is consistent with the twist form. Ab initio calculations with a variety of basis sets up to MP2(full)/aug-cc-pVTZ predict the envelope-axial and envelope-equatorial conformers to be saddle points with nearly the same energies but much lower energy than the planar conformer. By utilizing the microwave rotational constants for seven isotopomers ((28)Si, (29)Si, (30)Si, and four (13)C) combined with the structural parameters predicted from the MP2(full)/6-311+G(d,p) calculations, adjusted r(0) structural parameters have been obtained for the twist conformer. The heavy atom distances in A? are: r(0)(SiC(2)) = 1.875(3); r(0)(SiC(3)) = 1.872(3); r(0)(C(2)C(4)) = 1.549(3); r(0)(C(3)C(5)) = 1.547(3); r(0)(C(4)C(5)) = 1.542(3); r(0)(SiF) = 1.598(3) and the angles in degrees are: [angle]CSiC = 96.7(5); [angle]SiC(2)C(4) = 103.6(5); [angle]SiC(3)C(5) = 102.9(5); [angle]C(2)C(4)C(5) = 108.4(5); [angle]C(3)C(5)C(4) = 108.1(5); [angle]F(6)Si(1)C(2) = 110.7(5); [angle]F(6)Si(1)C(3) = 111.6(5). The heavy atom ring parameters are compared to the corresponding r(s) parameters. Normal coordinate calculations with scaled force constants from MP2(full)/6-31G(d) calculations were carried out to predict the fundamental vibrational frequencies, infrared intensities, Raman activities, depolarization values, and infrared band contours. These experimental and theoretical results are compared to the corresponding quantities of some other five-membered rings.     

Real-time tracking of phytochrome's orientational changes during Pr photoisomerization

Photoisomerization of a protein bound chromophore is the basis of the light sensing and signaling responses of many photoreceptors. Z-to-E photoisomerization of the Pr Cph1Δ2 phytochrome has been investigated by polarization resolved femtosecond visible pump-infrared probe spectroscopy, which yields structural information on the Pr excited (Pr*), Pr ground, and lumi-R product states. By exhaustive search analysis, two photoreaction time constants of (4.7 ± 1.4) and (30 ± 5) ps were found. Ring D orientational change in the electronic excited state to the transition state (90° twist) has been followed in real-time. Rotation of ring D takes place in the electronically excited state with a time constant of 30 ± 5 ps. The photoisomerization is best explained by a single rotation around C(15)═C(16) methine bridge in the Pr* state and a diffusive interaction with its protein surrounding.     

Investigation of Intermolecular C-H···Halogen Hydrogen Bonded Supramolecular Assemblies in Three Copper(Ⅰ) Complexes Formed by 3,3'-Dimethoxy-6,6'-dimethyl-2,2'-bipyridine Ligand

Three new crystalline compounds 1-3 were successfully obtained by the reactions of 3,3'-dimethoxy-6,6'-dimethyl-2,2'-bipyridine ligand(dmbp) with the corresponding Cu(Ⅰ) salts.Crystal data for 1:orthorhombic Pbca,a = 18.5858(12),b = 8.1821(5),c = 20.6066(13) ,V = 3133.7(3) 3,Z = 8,Dc = 1.843 g/cm3,F(000) = 1696,μ = 3.366 mm-1,the final R = 0.0223 and wR = 0.0542.Crystal data for 2:Orthorhombic Pbca,a = 18.7883(16),b = 8.3249(7),c = 19.0294(17) ,V = 2976.4(4) 3,Z = 8,Dc = 1.731 g/cm3,F(000) = 1552,μ = 4.154 mm-1,the final R = 0.0279 and wR = 0.0680.Crystal data for 3:monoclinic P21/c,a = 13.812(10),b = 9.910(7),c = 23.444(17) ,β = 104.3350(10)°,V = 3090(4) 3,Z = 4,Dc = 1.476 g/cm3,F(000) = 1408,μ = 1.588 mm-1,the final R = 0.0479 and wR = 0.1081.The results of X-ray crystallographic analysis revealed that C14H16ICuN2O2(1) and C14H16BrCuN2O2(2) are isostructural compounds with the dimers connected by C-H···halogen hydrogen bonds to generate a three-dimensional(3D) supramolecular network in 1 and a two-dimensional(2D) sheet structure in 2,respectively,while the mononuclear complex C28H32Cl2Cu2N4O4(3) is ionic.In 3,the [Cu(dmbp)2]+ cations and [ClCuCl]-anions are connected by C-H···Cl hydrogen bonds to form a one-dimensional(1D) chain along the a axis.Therefore,in the three complexes,the C-H···halogen hydrogen bonds dominate their crystal structures.Additionally,The UV luminescent properties of complexes 1-3 were investigated.     

Preparation and Characterization of Halogen-Boron-Phosphorus Compounds. X-ray Crystal Structures of X(3)B.P(SiMe(3))(3) and [X(2)BP(SiMe(3))(2)](2) (X = Cl, Br)

The 1:1 mole ratio reactions of boron trihalides (BX(3)) with tris(trimethylsilyl)phosphine [P(SiMe(3))(3)] produced 1:1 Lewis acid/base adducts [X(3)B.P(SiMe(3))(3), X = Cl (1), Br (2), I (5)]. Analogous 1:1 mole ratio reactions of these boron trihalides with lithium bis(trimethylsilyl)phosphide [LiP(SiMe(3))(2)] produced dimeric boron-phosphorus ring compounds {[X(2)BP(SiMe(3))(2)](2), X = Br (3), Cl (4)}. X-ray crystallographic studies were successfully conducted on compounds 1-4. Compound 1 crystallized in the orthorhombic space group Pbca, with a = 13.420(3) ?, b = 17.044(5) ?, c = 21.731(7) ?, V = 4970.6(25) ?(3), and D(calc) = 1.229 g cm(-3) for Z = 8; the B-P bond length was 2.022(9) ?, Compound 2 crystallized in the orthorhombic space group Pbca, with a = 13.581(6) ?, b = 17.106(7) ?, c = 22.021(9) ?, V = 5116(4) ?(3), and D(calc) = 1.540 g cm(-3) for Z = 8; the B-P bond length was 2.00(2) ?. Compound 3 crystallized in the monoclinic space group P2(1)/n, with a = 9.063(5) ?, b = 16.391(8) ?, c = 9.331(4) ?, V = 1379.2(12) ?(3), and D(calc) = 1.676 g cm(-3) for Z = 2; the B-P bond length was 2.023(10) ?. Compound 4 crystallized in the monoclinic space group P2(1)/n, with a = 9.143(5) ?, b = 16.021(8) ?, c = 9.170(4) ?, V = 1342.2(11) ?(3), and D(calc) = 1.282 g cm(-3) for Z = 2; the B-P bond length was 2.025(3) ?. Thermal decomposition studies were performed on compounds 1-4, yielding colored powders with boron:phosphorus ratios greater than 1:1 and significant C and H contamination indicated by elemental analyses.     

Practical method transfer from high performance liquid chromatography to ultra-high performance liquid chromatography: the importance of frictional heating

In theory, with identical stationary phase chemistry, the transfer of an HPLC method to UHPLC conditions is straightforward and necessitates the calculation of new conditions based on column and instrument geometries. Occasionally, undesirable changes in selectivity, retention or efficiency have been reported and have been attributed to a frictional heating phenomenon that is due to the elevated generated pressure drop. In the present study, the frictional heating in a UHPLC system was evaluated experimentally under gradient elution conditions (acetonitrile/buffer at pH 3 and 9) with generated pressure drops in the range of 100-1000 bar on both 1.0mm and 2.1mm I.D. columns using a mixture of 10 representative basic, acidic and neutral pharmaceutical compounds. Under adiabatic conditions (i.e., still-air oven), the longitudinal temperature gradient was estimated at +4 °C, +8 °C and +16 °C at 300, 600 and 1000 bar, respectively, on a 2.1mm I.D. column using an empirical measurement procedure. With the 1.0mm I.D. column, these values were reduced to +3 °C, +6 °C and +12 °C, respectively. Finally, various approaches to eliminate or at least to reduce the effect of frictional heating are briefly discussed.     

IR spectroscopic analysis of polymorphism in C13H14N4O

IR analysis is used here to investigate the changes in N-N, N-H, CO modes of thermally treated diphenyl carbazide (DPC) during the variation of temperature from room temperature up to ≈160°C. Polymorphism in DPC compound has been studied here by detecting the changes in some IR spectroscopic parameters (e.g., mode shift, band contour) during the elevation of temperature. Also, DSC, X-ray, NMR and atomic mass spectra are used as confirming tools for what is obtained by IR. All of the vibrations of DPC were found to be due to ionic fundamentals 3311 cm(-1), 3097 cm(-1), 3052 cm(-1), 1677 cm(-1), 1602 cm(-1), 1492 cm(-1), 1306 cm(-1), 1252 cm(-1), 887 cm(-1) and 755 cm(-1). The results revealed for the first time that the thermally treated DPC traverse four different phase transformations at 50°C, 90°C, 125°C and 140°C. The crystal structure was found to be amorphous, monoclinic, tetragonal, orthorhombic and amorphous within a temperature range (30°C-160°C). X-ray diffraction patterns support the results obtained by IR and DSC.