A neutral Ni(II) acetylide-mediated radical polymerization of methyl methacrylate using the atom transfer radical polymerization method

A neutral nickel σ-acetylide complex [Ni(CCPh)₂(PBu₃)₂] (NBP) is used for possible atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in conjunction with an organic halide as an initiator [R-X: CCl₄, CH₃Cl, BrCCl₃, C₂H₅Br, and C₅H₉Br] in toluene at 80 °C. Among these initiating systems, BrCCl₃/NBP gave the best controlled radical polymerization of MMA and produced polymer with relatively narrow molecular weight distribution (M_w/M_n≈1.3). The ATRP of MMA is preliminarily identified by the following facts: (1) the present MMA polymerization initiated by BrCCl₃/NBP is completely hindered by the addition of TEMPO; (2) the conversion shows a typical linear variation with time in semilogarithmic coordinates; (3) the measured number-average molecular weights of polymer show a linear increase with conversion and agree closely with the theoretical values; (4) the resulting polymer chain contains a dormant carbon-halogen terminal.     

Nitroxide-mediated photo-living radical polymerization of methyl methacrylate in solution

The photoradical polymerization of methyl methacrylate (MMA) was performed in an acetonitrile solution at room temperature using (2RS,2′RS)-azobis(4-methoxy-2,4-dimethylvaleronitrile) as the initiator, 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl as the mediator, and (4-tert-butylphenyl)diphenylsulfonium triflate as the photo-acid generator. This solution polymerization showed a non-steady-state during the very early stage followed by a steady-state. The polymerization produced oligomers with several thousand molecular weights at a very low conversion under the non-steady-state. It was confirmed that the polymerization proceeded in accordance with a living mechanism under the steady-state based on the linear correlations for both the first-order time-conversion plots and the conversion–molecular weight plots. The molecular weight distributions of the polymers obtained in the steady-state were approximately 1.8. The block copolymerization with isopropyl methacrylate ( ⁱ PMA) demonstrated that the growing polymer chain ends of the MMA prepolymer were stabilized even at a high conversion and efficiently initiated the ⁱ PMA polymerization.     

Synthesis of star‐shaped copolymers with methyl methacrylate and n‐butyl methacrylate by metal‐catalyzed living radical polymerization: Block and random copolymer arms and microgel cores

Various star‐shaped copolymers of methyl methacrylate (MMA) and n‐butyl methacrylate (nBMA) were synthesized in one pot with RuCl₂(PPh₃)₃‐catalyzed living radical polymerization and subsequent polymer linking reactions with divinyl compounds. Sequential living radical polymerization of nBMA and MMA in that order and vice versa, followed by linking reactions of the living block copolymers with appropriate divinyl compounds, afforded star block copolymers consisting of AB‐ or BA‐type block copolymer arms with controlled lengths and comonomer compositions in high yields (≥90%). The lengths and compositions of each unit varied with the amount of each monomer feed. Star copolymers with random copolymer arms were prepared by the living radical random copolymerization of MMA and nBMA followed by linking reactions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 633–641, 2002; DOI 10.1002/pola.10145     

Study on the polymerizations of methyl methacrylate and styrene initiated with chlorotrimethylsilane and CuCl/N,N,N′,N″,N″-pentamethyldiethyltriamine

Methyl methacrylate (MMA) and styrene (St) have been radically polymerized in the presence of chlorotrimethylsilane and CuCl/N,N,N′,N″,N″-pentamethyldiethyltriamine (Me₃SiCl/CuCl/PMDETA). An analysis of the resultant polymers by ¹H NMR discloses terminal silyl group and chlorine atom in all the obtained polymers. Kinetics studies have been carried out by measuring monomer conversions and polymer molecular weights against polymerization time. The results indicate that, for both MMA and St polymerizations, the monomer conversions exhibit a quasi-linear relationship with polymerization time, and the polymer number-average molecular weight (M_n) also increases with monomer conversion. The molecular weights of both PS and PMMA exceed one hundred thousand. Regardless of molecular weight, all the polymers show narrow molecular distributions (M_w/M_n = 1.2-1.5). These polymerization reactions are speculated to follow a mechanism similar to that of atom transfer radical polymerization (ATRP).     

Polymerization of methyl methacrylate by charge-transfer complex using n-butyl amine and carbon tetrachloride in dimethylsulphoxide

The charge-transfer complex formed by the interaction of an aliphatic amine, such as n-butylamine (nBA), and carbon tetrachloride (CCl₄) in dimethylsulphoxide (DMSO) initiates polymerization of methyl methacrylate (MMA) at 30°. The rate of polymerization is given by R_p = k[MMA]^0.83 [nBA]^0.5 [CCl₄]^0.5 when [CCl₄]/[nBA] is ? 1. When [CCl₄]/[nBA] > 1, R_p is independent of [CCl₄] and R_p = k[MMA]^1.46 [nBA]^0.5. The average rate constants are (1.42 ± 0.05) × 10^?6 1 mol^?1 sec^?1 in terms of MMA and (2.20 ± 0.06) × 10^?6 sec^?1 at 30° for higher and lower concentration of carbon tetrachloride respectively. A charge-transfer mechanism for polymerization is suggested.     

2‐[(Diphenylphosphino)methyl]pyridine as ligand for iron‐based atom transfer radical polymerization

2‐[(Diphenylphosphino)methyl]pyridine (DPPMP) was successfully used as a bidentate ligand in the iron‐mediated atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) with various initiators and solvents. The effect of the catalytic system on ATRP was studied systematically. Most of the polymerizations with DPPMP ligand were well controlled with a linear increase in the number‐average molecular weights (M_n) versus conversion and relatively low molecular weight distributions (M_w/M_n = 1.10–1.3) being observed throughout the reactions, and the measured molecular weights matched the predicted values. Initially added iron(III) bromide improved the controllability of the polymerization reactions in terms of molecular weight control. The ratio of ligand to metal influenced the controllability of ATRP system, and the optimum ratio was found to be 2:1. It was shown that ATRP of MMA with FeX₂/DPPMP catalytic system (X = Cl, Br) initiated by 2‐bromopropionitrile (BPN) was controlled more effectively in toluene than in polar solvents. The rate of polymerization increased with increasing the polymerization temperature and the apparent activation energy was calculated to be 56.7 KJ mol^?1. In addition, reverse ATRP of MMA was able to be successfully carried out using AIBN in toluene at 80 °C. Polymerization of styrene (St) was found to be controlled well by using the PEBr/FeBr₂/DPPMP system in DMF at 110 °C. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2922–2935, 2008     

Self-initiated atom transfer radical polymerization of methyl methacrylate in cyclohexanone

The self-initiated atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in cyclohexanone (CHO) in the presence of CuCl₂/N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) is reported. The linear semilogarithmic plot of ln([M]₀/[M]) vs time, the linear increase of number-average molecular weight (M_n) with conversion, and rather narrow molecular weight distributions (MWDs) have been observed, which are in agreement of the characteristics of living/controlled polymerization. The NMR spectrum revealed the existence of terminal chlorine. The chain extension further proved the living characteristic. The polymerization can only be successful using CHO as the solvent, and is well controlled at the temperature as low as 50 °C. The effects of ligand, solvent, temperature and monomer to catalyst ratio are all discussed.     

Anionic polymerization of Lewis acid-activated methyl methacrylate by enamines

A novel ionic polymerization of methyl methacrylate (MMA) with a series of enamines (1) in the presence of methylaluminum bis(2,6-di-tert-butylphenoxide) (2) was examined. Both nucleophile (1) and electrophile (2) are indispensable for the present polymerization, in which (1) acts as initiator and (2) as activator. MMA polymerization proceeded smoothly in toluene at or below room temperature (r.t.) in the presence of 1 and 2 (1 ∼ 4 mol %, respectively), went to completion within 1 h, and afforded syndiotactic-rich PMMA with molecular weight distribution (M_w/M_n) in the 1.1 ∼ 1.4 range. The number-average molecular weight (M_n) of the polymer was significantly higher than that calculated from the feed ratio of 1 to the monomer, indicating low initiating efficiency. Kinetic studies coupled with isolation of an intermediate species proved that the real monomeric species involved in both initiation and propagation was a complex of MMA with 2. The effects of the concentrations of 1, 2, and MMA as well as the temperature of polymerization were also examined. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3671–3679, 1999     

Ruthenium‐catalyzed fast living radical polymerization of methyl methacrylate: The R?Cl/Ru(Ind)Cl(PPh3)2/n‐Bu2NH initiating system

A fast living radical polymerization of methyl methacrylate (MMA) proceeded with the (MMA)₂? Cl/Ru(Ind)Cl(PPh₃)₂ initiating system in the presence of n‐Bu₂NH as an additive [where (MMA)₂? Cl is dimethyl 2‐chloro‐2,4,4‐trimethyl glutarate]. The polymerization reached 94% conversion in 5 h to give polymers with controlled number‐average molecular weights (M_n's) in direct proportion to the monomer conversion and narrow molecular weight distributions [MWDs; weight‐average molecular weight/number‐average molecular weight (M_w/M_n) ≤ 1.2]. A poly(methyl methacrylate) with a high molecular weight (M_n ～ 10⁵) and narrow MWD (M_w/M_n ≤ 1.2) was obtained with the system within 10 h. A similarly fast but slightly slower living radical polymerization was possible with n‐Bu₃N, whereas n‐BuNH₂ resulted in a very fast (93% conversion in 2.5 h) and uncontrolled polymerization. These added amines increased the catalytic activity through some interaction such as coordination to the ruthenium center. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 617–623, 2002; DOI 10.1002/pola.10148     

Synthesis of precursors of poly(acryl amides) by copper mediated living radical polymerization in DMSO

The paper describes the optimization of copper(I) mediated living radical polymerization of N-hydroxysuccinimide methacrylate to achieve AB block copoly(acryl amides) offering a route to polymers with potential biomedical applications. Polymerization of N-hydroxysuccinimide methacrylate was carried out using copper(I) bromide/N-(n-propyl)-2-pyridylmethanimine catalyst with ethyl-2-bromoisobutyrate as the initiator at three different temperatures (70, 50 and 30 °C). Polymerizations at both 70 and 50 °C gave relatively high conversion, 72% and 62% respectively after 4 h. Polymerization at 30 °C the best linear first-order kinetic plot. The polydispersity remained narrow (1.15) and there was a good agreement between experimental, determined by ¹H NMR, and theoretical M_n. Polymerization of N-hydroxysuccinimide methacrylate was investigated in more detail by following reactions in situ by ¹H NMR. The experimental values of M_n (NMR) were quite close to the theoretical values and the polydispersities were relatively narrow (1.10-1.19). Isolated poly(N-hydroxysuccinimide methacrylate) was used as a macroinitiator for the polymerization of MMA catalyzed by Cu(I)Br in conjunction with N-(n-propyl)-2-pyridylmethanamine ligand leading to block copolymers. A poly(methyl acryl amide) is synthesized indirectly from the reaction of benzyl amine with poly(N-hydroxysuccinimide methacrylate) for 5 h with in DMSO at 50 °C under nitrogen.     

Effect of Rh(III) and Ru(II) complexes in the polymerization of vinyl monomers initiated by charge transfer mechanism

The initiation of polymerization of vinyl monomers such as methyl methacrylate (MMA) and methyl acrylate (MA) by a charge transfer complex formed between n-butylamine(nBA) and carbon tetrachloride (CCl₄) in dimethylsulfoxide (DMSO) at 30°C is slow. The effect of the dimethylsulfoxide complexes of Rh(III) and Ru(II) on the polymerization of MMA and MA in the presence of nBA, and CCl₄ in DMSO has been studied. The rate of polymerization and percent conversion of the MMA and MA at 30°C are evaluated at the critical concentration of the metal complexes. At the critical range of the metal complex concentrations, both R_p, and percent conversion of MMA and MA were found to be highest. However, above and below the critical concentrations, R_p and percent conversion of the monomers were found to decrease. A suitable mechanism for the polymerization has been proposed.     

Pseudo-living radical polymerization using triarylmethane as the thermal iniferter

Triphenylmethane (TPM) was used as the initiator-transfer-terminator agent (iniferter) for the pseudo-living radical polymerization of methyl methacrylate (MMA) in cyclohexanone (CHO) for the first time. The pseudo-living radical polymerization of styrene is also investigated for comparison. The polymerizations both exhibit a linear increase of number molecular weight (M_n) with conversion and the obtained polymer can be utilized as a macroinitiator for the successful chain extension. Other factors such as polymerization temperature and the molar ratio of monomer-to-iniferter were investigated and the polymerization results also showed pseudo-living characteristics. Furthermore, other triarylmethanes with substituents, such as tris-(p-acetylphenyl) methane (TAcPM) and tris-(p-carboxyphenyl) methane (TCOPM), were also employed. The results further confirmed that the other compounds with similar structure can also be used as the iniferter.     

Homogeneous Solution Reverse Atom Transfer Radical Polymerization of Methyl Methacrylate

A homogeneous reverse atom transfer radical polymerization (RATRP) of methyl methacrylate (MMA) was successfully carried out in N, N-dimethylformamide(DMF) (25%, v/v) at 69°C, using an initiating system azobisisobutyronitrile (AIBN)/CuBr₂/N, N, N′, N″, N″-pentamethyldiethylenetriamine (PMDETA). The kinetics of homogeneous solution polymerizations showed linear first-order rate plots, indicating a constant number of growing species throughout the polymerization as well as a negligible contribution of termination or transfer reactions; a linear increase of the number-average molecular weight with conversion, and relatively low polydispersities, but low initiator efficiency. The dependence of the rate of polymerization on the concentrations of initiator, catalyst, ligand and temperature were presented.     

Alkoxyamine‐mediated “living” radical polymerization: MS investigation of the early stages of styrene polymerization initiated by cumyl‐TEISO

A new series of 1,1,3,3‐tetraethylisoindoline‐2‐oxyl (TEISO)‐based alkoxyamines was prepared. The half‐lives for thermal dissociation indicated that the most sterically congested cumyl‐TEISO alkoxymine had the greatest potential as an initiator for the polymerization of monomers at lower temperatures. The polymerization of styrene at 110 °C gave a linear evolution of M_n with conversion in the early stages. Further evidence for the “living” nature was given by the polydispersities of the polymers that remained low (M_w/M_n = 1.13–1.27) throughout the polymerization (up to 80% conversion). No polymer was formed for the styrene system in a reasonable time below 100 °C. High‐performance liquid chromatographic/mass spectrometric investigations of the distribution of trapped oligomers containing one to nine monomer units formed at 60 °C revealed that the trapping of oligomeric cumyl–styryl radicals by TEISO is irreversible at this temperature. Methyl methacrylate polymerized with cumyl‐TEISO at 60–70 °C, although the initial high rates of polymerization soon decreased to zero at low conversions (10–15%), and the high polydispersities (M_w/M_n = 1.42–1.73) indicated significant side reactions. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1232–1241, 2001     

Terpolymerization of Triisopropylsilyl Acrylate,Methyl Methacrylate,and Butyl Acrylate: Reactivity Ratio Estimation

Ternary monomer reactivity ratios of triisopropylsilyl acrylate (SiA), methyl methacrylate (MMA), and n‐butyl acrylate (BA), as common monomers in self‐polishing coatings (SPCs) binders are obtained using experimental data collected from free radical bulk polymerization at 70 °C. Different terpolymerizations at low and medium‐high conversions are performed at optimized feed compositions. Estimations are made using the error‐in‐variables model (EVM) framework, applying the recast form of the Alfrey–Goldfinger (AG) model and a direct numerical integration (DNI) approach to the collected data. Estimations from individual low and medium‐high conversion data are compared to those found with the combined data (full conversion range data). The highest certainty in point estimates are obtained with analysis of the full conversion range data. Furthermore, the reactivity ratios determined from the combined data fall between those found with analysis of individual low and medium‐high conversion data, another corroboration of reliable data collection. Reactivity ratios determined from analysis of the combined data (r_SiA/MMA = 0.4185, r_MMA/SiA = 1.3754, r_SiA/BA = 0.8739, r_BA/SiA = 0.5736, r_BA/MMA = 0.3692, r_MMA/BA = 1.7919) are used in the recast AG model to predict cumulative terpolymer composition as a function of conversion. The experimental data and model prediction show satisfactory agreement.     

Iron‐mediated AGET ATRP of methyl methacrylate using metal wire as reducing agent

Methyl methacrylate (MMA) were successfully polymerized by atom transfer radical polymerization with activator generated by electron transfer (AGET ATRP) using copper or iron wire as the reducing agent at 90°C. Well‐controlled polymerizations were demonstrated using an oxidatively stable iron(III) chloride hexahydrate (FeCl₃·6H₂O) as the catalyst, ethyl 2‐bromoisobutyrate (EBiB) as the initiator, and tetrabutylammonium bromide (TBABr) or triphenylphosphine as the ligand. The polymerization rate was fast and affected by the amount of catalyst and type of reducing agents. For example, the polymerization rate of bulk AGET ATRP with a molar ratio of [MMA]₀/[EBiB]₀/[FeCl₃·6H₂O]₀/[TBABr]₀ = 500/1/0.5/1 using iron wire (the conversion reaches up to 82.2% after 80 min) as the reducing agent was faster than that using copper wire (the conversion reaches up to 86.1% after 3 h). At the same time, the experimental M_n values of the obtained poly(methyl methacrylate) were consistent with the corresponding theoretical ones, and the M_w/M_n values were narrow (～1.3), showing the typical features of “living”/controlled radical polymerization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Ab initio studies on hydrogen-bonded clusters. I. Linear and cyclic oligomers of hydrogen cyanide

Large-scale ab initio calculations have been performed on linear and cyclic oligomers of hydrogen cyanide molecules applying basis sets ranging from double-zeta to near-Hartree-Fock quality. Equilibrium geometries of linear (HCN)_n clusters with n = 1 to 5 and of cyclic clusters with n = 3, 4 are reported. For most of the complexes complete vibrational analysis has been carried out. In agreement with recent experimental data the linear HCN trimer was found to be more stable than the cyclic trimer. In case of the tetramer linear and cyclic structures are of comparable stability. The structural changes taking place upon polymerization of linear HCN clusters and the convergence of various stage properties to those of the infinite polymer (HCN)_∞ are discussed in detail. The evolution from vibrational spectra of small oligomers to phonon dispersion curves of the infinite polymer is illustrated too.     

The anionic oligomerization of hexamethylcyclotrisiloxane with methylmethoxysilanes

The polymerization of hexamethylcyclotrisiloxane (D₃) initiated with inorganic and organometallic bases was studied in the presence of methylmethoxysilanes of general formula (MeO)_nSiMe_4−n (n = 1, 2, 3 or 4) as chain transfer agents. In the case of n = 2, 3 or 4, the process can proceed in a specific way leading to the predominant formation of linear oligomers composed of sequences of structure [(Me)₂SiO]₃ (monomer unit) and fragments of one molecule of the methylmethoxysilane. The reaction provides a good method for synthesis of some of these oligomers. The mechanism of the oligomerization is discussed.     

Polymerization of methyl methacrylate by metallocene imido complexes and tris(pentafluorophenyl)alane

The polymerization of methyl methacrylate (MMA) was investigated with tris(pentafluorophenyl)alane [Al(C₆F₅)₃] and four metallocene imido complexes that varied in the complex symmetry/chirality, metal, and R group in the ?NR moiety, as well as a zirconocene enolate preformed from the imido zirconocene and MMA. This study examined four aspects of MMA polymerization: the effects of the metallocene imido complex structure on the polymerization activity and polymer tacticity, the degree of polymerization control, the elementary reactions of the imido complex with Al(C₆F₅)₃ and MMA, and the polymerization kinetics and mechanism. There was no effect of the imido complex symmetry/chirality on the polymerization stereochemistry; the polymerization followed Bernoullian statistics, producing syndiotactic poly(methyl methacrylate)s with moderate (～70% [rr]) to high (～91% [rr]) syndiotacticity, depending on the polymerization temperature. Polymerization control was demonstrated by the number‐average molecular weight, which increased linearly with an increase in the monomer conversion to 100%, and the relatively small and insensitive polydispersity indices (from 1.21 to 1.17) to conversion. The reactions of the zirconocene imido complex with Al(C₆F₅)₃ and MMA produced the parent base‐free imido complex and the [2 + 4] cycloaddition product (i.e., zirconocene enolate), respectively; the latter product reacted with Al(C₆F₅)₃ to generate the active zirconocenium enolaluminate. The MMA polymerization with the metallocene imido complex and the alane proceeded via intermolecular Michael addition of the enolaluminate to the alane‐activated MMA involved in the propagation step. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3132–3142, 2003     

Vinyl Polymerization. 355. Polymerization of Methyl Methacrylate Initiated with the System Oxycellulose,Cu(II) Ion,and Water

The polymerization of methyl methacrylate (MMA) initiated with a system of oxycellulose, CuCl₂, and water was carried out. The conversion of MMA and the degree of polymerization of homopoly-MMA were larger than obtained with the initiator system of cellulose, CuCl₂ and water, while the efficiency of grafting was almost the same. It was confirmed that the polymerization proceeds through a radical mechanism. The effects of amounts of cupric chloride, water, and MMA in the feed on the conversion were studied. The pH of the water phase showed a remarkable effect: maximum conversion was obtained at neutral pH. At 90°C, a ceiling temperature was observed. The overall activation energy was estimated to be 96.7 kJ/mole. The initiation mechanism is discussed.