量子Turbo乘积码

量子通信是经典通信和量子力学相结合的一门新兴交叉学科.量子纠错编码是实现量子通信的关键技术之一.构造量子纠错编码的主要方法是借鉴经典纠错编码技术,许多经典的编码技术在量子领域中都可以找到其对应的编码方法.针对经典纠错码中最好码之一的Turbo乘积码,提出一种以新构造的CSS型量子卷积码为稳定子码的量子Turbo乘积码.首先,运用群的理论及稳定子码的基本原理构造出新的CSS型量子卷积码稳定子码生成元,并描述了其编码网络.接着,利用量子置换SWAP门定义推导出量子Turbo乘积码的交织编码矩阵.最后,推导出量子Turbo乘积码的译码迹距离与经典Turbo乘积码的译码距离的对应关系,并提出量子Turbo乘积码的编译码实现方案.这种编译码方法具有高度结构化,设计思路简单,网络易于实施的特点. 关键词： CSS码 量子卷积码 量子Turbo乘积码 量子纠错编码     

基于六光子量子避错码的量子密钥分发方案

量子信道中不可避免存在的噪声将扭曲被传输的信息,对通信造成危害。目前克服量子信道噪声的较好方案是量子避错码（QEAC）。将量子避错码思想用于量子密钥分发,能有效克服信道中的噪声,且无需复杂的系统。用六光子构造了量子避错码,提出了一种丛于六光子避错码的量子密钥分发（QDK）方案。以提高量子密钥分发的量子比特效率和安全性为前提,对六光子避错码的所有可能态进行组合,得到一种六光子避错码的最优组合方法,可将两比特信息编码在一个态中,根据测肇结果和分组信息进行解码,得到正确信息的平均概率为7／16。与最近的基于四光子避错码的克服量子信道噪声的量子密钥分发方案相比,该方案的量子比特效率提高了16．67％,密钥分发安全性足它的3．5倍。     

采用纠缠辅助量子LDPC码和检错重传策略的量子直传通信方案

针对现有量子信息直传协议在有噪音量子信道下传输效率低及可靠性差的问题,提出了一种有效利用纠缠资源的量子安全直传通信方案.通过收发双方共享纠缠粒子作为辅助比特,采用纠缠辅助量子低密度校验码对量子态信息进行前向纠错保护,以提高系统在噪音环境下的传输可靠性.同时采用自动请求重传策略对量子态信息进行检错编码保护,当因窃听或强噪...     

量子Turbo码

量子纠错编码技术在量子通信和量子计算领域起着非常重要的作用.构造量子纠错编码的主要方法是借鉴经典纠错编码技术,目前几乎所有经典纠错编码方案都已经被移植到量子领域中来,然而在经典编码领域纠错性能最杰出的Turbo码却至今没有量子对应.提出了一种利用量子寄存器网络构造量子递归系统卷积码的简单实现方案,同时利用量子SWAP门设计了一种高效的量子交织器门组网络方案.最后仿照经典Turbo码的设计原理提出串行级联的量子Turbo码,同时提出了可行的译码方法.量子Turbo码不仅丰富了量子纠错码研究的领域,同时为解释 关键词： 量子递归系统卷积码 量子Turbo码 量子纠错编码 量子信息     

单向量子密钥纠错协议的纠错性能仿真分析

高效误码纠错是量子密钥分配后续数据处理的关键技术之一.基于汉明码校验子级联单向一次通信纠错方案, 分别对三种校验子级联纠错能力进行了理论和仿真分析.根据分析结果提出了一种基于混合校验子级联纠错协议, 通过优化纠错流程相关参数提高密钥生成效率.随后对该协议的纠错能力及其密钥生成效率进行了仿真分析, 最后根据误码率后验分布参数, 对密钥最终误码率及其置信区间进行了估计.单一校验子级联纠错仿真结果显示:在相同的纠错能力的条件下, 初始误码率为3% < p ≤ 11% 时, (7, 4)汉明码纠错的密钥生成效率最高;初始误码率为1.5% < p ≤ 3.0% 时, (15, 11)汉明码纠错的密钥生成效率最高;初始误码率为p ≤ 1.5% 时, (31, 26) 汉明码纠错的密钥生成效率最高.混合校验子级联纠错方案的仿真结果显示:对于初始误码率为9.50%, 经过8轮次混合校验子级联纠错, 密钥生成效率为9.94%, 误码率期望值为5.21×10^-12, 置信度为90%的上限值为2.85×10^-11, 相比用单一(7, 4)校验子级联纠错的密钥生成效率提高了约3倍. 关键词： 量子密钥分配 保密纠错 效率分析     

基于GHZ态的身份认证与密钥分配方案

在量子密钥分配协议中存在这样一个基本假设,即攻击者不能同时获得量子信道和经典信道上的信息;为解决这一假设性难题,对量子的纠缠特性进行了研究,提出一种基于GHZ三重态的身份认证与密钥分配方案,该方案在建立一次量子信道后利用GHZ三粒子的关联性实现通信双方与仲裁第三方三者之间的身份认证,然后利用远程传态实现通信密钥分配以及新认证密钥的分配,确保通信方身份不可伪造与通信信息安全,最后结合常见的攻击方式论证了该方案的安全性。     

基于伪态协议的量子密钥分配系统研究

采用包含两个伪态和一个信号态的双伪态协议分析了量子密钥分配系统的性能,比较了双伪态（真空态—弱伪态）和单伪态协议条件下密钥生成率与通信距离的关系,分析了信号态的强度、量子比特误码率、单光子的增益和单光子的误码率对系统密钥生成率的影响,得出密钥生成率的最优化条件,为实现实用安全的量子密钥分配系统奠定理论基础. 关键词： 伪态协议 量子密钥生成率 量子比特误码率     

量子计算纠错取得突破性进展

谷歌团队利用超导量子芯片,实现了两种规模的量子纠错表面码,利用辅助比特进行多次测量和初始化操作进行纠错,表明使用更多量子比特表面码的逻辑比特,其性能表现更好,达到了量子纠错规模化的盈亏平衡点,本文简要回顾量子纠错的机制,讨论谷歌量子纠错结果的意义,以及系列量子纠错进展,最后将展望量子计算的发展方向.     

量子密钥分发与量子安全直接通信

量子通信具有高安全性等优点,是当前的国际研究前沿,量子安全直接通信和量子密钥分发是两种重要的量子信息方式.量子密钥分发通过量子信道产生随机的密钥,而量子安全直接通信直接在量子信道中传输秘密信息.本文力图利用浅显易懂的语言介绍量子安全直接通信和量子密钥分发的基本原理;重点描述几个典型的量子安全直接通信方案,介绍目前的发展状态并展望未来.     

多逻辑比特表面码结构设计及其逻辑CNOT门实现

量子计算因具有并行处理能力,相比于经典计算有着指数级的加速,但量子系统具有脆弱性,极易受到噪声的影响,量子纠错码是克服量子噪声的有效手段.量子表面码是一种拓扑稳定子码,由于其结构上的最近邻居特点和较高的容错阈值,表面码在大规模容错量子计算方面具有巨大的潜力.目前已有的基于边界的表面码均为编码一个逻辑比特的表面码,本文主要研究基于边界如何实现多逻辑量子比特的编码,包括设计表面码的结构,根据结构找出对应的稳定子和逻辑操作,进一步根据稳定子设计出基于稳定子实现的编码线路;在研究基于测量和纠正的单量子比特间CNOT实现原理和基于融合操作和分割操作的单逻辑量子比特表面码间CNOT门实现原理的基础上,优化了基于融合操作和分割操作的单逻辑量子比特表面码间CNOT门实现方案,将其扩展到所设计的多逻辑量子比特表面码上实现了多逻辑量子比特表面码之间的CNOT操作,并通过仿真验证量子线路的正确性.本文设计的多逻辑比特表面码克服了单比特表面码不能密铺于量子芯片的缺点且提高了某些逻辑操作的长度,提高了容错能力.基于联合测量的思想降低了对辅助比特的要求且减小了实现过程中对量子资源的需求.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.