混合表面等离子体微盘腔模式特征及传感特性

为了实现高Q值极小模体积的表面等离子体微腔,提出一种混合表面等离子体微盘腔,介质微盘上放置横截面为矩形的金属纳米环形条,微盘腔中间由低折射率材料隔离.用有限元法对混合微腔的模式特性进行数值模拟,研究了其品质因子、有效模式体积和腔外能量比随器件几何尺寸的变化规律.结果表明,所设计微盘腔具有较低的传播损耗、较强的光场约束能力和较高的腔外能量比,品质因子高达7 000,最小模体积仅为0.315μm3,可实现高灵敏度折射率传感.     

表面等离子体激元微盘的优化设计及应用

表面等离子体激元(SPP)微腔具有很高的品质因子和极小的模式体积,在光电子器件研究方面具有重要的应用价值。采用有限元法对表面等离子体激元的金属覆盖介质微盘谐振腔进行理论模拟,研究考虑微盘底半径、介质层厚度及金属膜厚度等参数对微盘表面等离子体模的品质因子及模体积的影响。研究表明,在光通信波段1550nm附近获得高品质因子(1000以上),极低模式体积的表面等离子体微盘。最后研究了利用优化设计的微盘进行折射率传感的应用,获得了高达300nm/RIU的折射率传感灵敏度。     

利用场耦合理论研究开放微波谐振腔

利用电磁场的等效原理，将一个开放微波腔等效于一个闭合边界微波腔（即封闭微波腔）和开放边界（即行波吸收边界）两部分，然后利用等效封闭微波腔的本征模式及其与开放边界的耦合，建立了关于开放微波腔模式（即模式场分布、频率、品质因子）的耦合方程组，其中开放边界为行波吸收边界.以X波段六腔渡越振荡管为例进行分析，将该振荡管等效为封闭微波腔和同轴输出结构两部分，用SUPPERFISH获得封闭腔的各个模式场分布及频率，然后根据封闭微波腔与开放边界的耦合，求得六腔渡越振荡管的工作模频率为9.25GHz，品质因子为115.2，与实验测量结果基本符合. 关键词： 微波腔 本征模式 场耦合 渡越振荡管     

立体耦合光子晶体薄板微腔的高Q值特性研究

利用微腔之间的立体耦合,提出了基于无源材料硅的双层光子晶体薄板H1(DLPCS-H1)腔,薄板之间为空气层.使用三维时域有限差分方法和Padé近似方法分析了DLPCS-H1腔的偶极模的场分布和品质因子.通过对中间空气层高度的优化使DLPCS-H1腔的偶极模的品质因子得到了显著的提高,大约为单层光子晶体薄板H1腔的偶极模的品质因子的4倍.此外,还研究了三层光子晶体薄板H1腔,它的偶极模的品质因子约为单层光子晶体薄板H1腔的偶极模的品质因子的7倍.     

基于模式分裂现象的在纤式双微盘谐振腔

为了实现结构紧凑、性能稳定的回音壁微腔,提出一种在纤式并联双微盘结构,其中回音壁微腔与激发回音壁模式的光波导均处于光纤纤芯中.采用有限时域差分法研究模式分裂现象中对称模式与反对称模式随着两微盘耦合间距增大的变化规律.研究结果表明,对称模式与反对称模式之间存在竞争关系,随着耦合间距的增大,反对称模式的透射率先变大后变小,...     

高品质因子和高传输效率的二维光子晶体耦合腔波导研究

基于时域有限差分方法,通过仿真计算设计了一种具有较高品质因子和传输效率的二维光子晶体耦合腔波导结构。通过改变二维光子晶体波导微腔结构中隔绝波导与微腔的空气孔的半径和数量,在获得近似90%的传输效率的同时,使得品质因子达到了8.20×104。为了使品质因子在大幅度提高的同时,传输效率只有小幅度的降低,在波导微腔结构中引入了链式微腔。将链式微腔结构与传统的波导微腔结构相结合,使这种新形式的耦合腔结构的品质因子提高了1个数量级,传输效率仅下降了约40%。     

基于飞秒激光直写的单向单模耦合微腔

对具有高Q值的回音壁模式微腔进行调制来获得单向单模输出,对研究腔光力学和开发高质量的微激光具有重要意义.本文对利用飞秒激光直写加工的耦合回音壁模式微腔的研究进行了简要回顾,具体介绍了微腔结构设计、加工过程、激射和耦合机制研究等.利用飞秒激光直写加工的强大三维图案化能力,灵活地设计实现了具有集成功能的单个微腔和具有不同空间组合位置的多个耦合微腔.基于耦合微腔的微激光具有低阂值,同时显示出良好的单模特性和单向性.结合理论模拟可以证实,微腔与微腔/光栅之间的耦合,一方面支持游标效应和集成滤波两种选模方式,另一方面能够破坏微腔的旋转对称性从而获得单向输出,从而实现了对微腔输出的有效调控.     

偶极子位置及偏振对激发光子晶体H1微腔的影响

光子晶体微腔和量子点的集成是实现量子信息处理非常具有潜力的平台之一,利用微腔和量子点的耦合可以制备纠缠光子对,实现对量子态的操控.因为光子晶体微腔具有品质因子高、模场体积小等优点,可以极大地增强光与物质之间的相互作用,从而易于实现量子态在不同物理体系之间的转换.通过单量子点和光子晶体H1微腔的耦合可以产生纠缠光子对,因为H1微腔具有简并的、模式偏振正交的基态模式.通常微腔模式的激发随着量子点在微腔中的位置变化而改变,本文用时域有限差分方法研究了偶极子光源的位置及偏振对激发光子晶体H1微腔模式的影响.结果表明:通过改变偶极子光源位置可以选择性地激发H1微腔简并模式中的一个;具有某一偏振的偶极子光源只能激发相应偏振的微腔模式;模式激发强度的大小也是由偶极子光源在微腔中的位置决定的.鉴于目前量子点在微腔中的位置尚不能精确控制,所以微腔模式受激发光源位置的影响的研究具有重要意义.     

超高Q值光学微腔光谱信号采集系统设计与分析

针对超高品质因子Q值光学微腔实验系统的光谱数据采集难题,设计了一款针对光学微腔的光谱信号采集系统。对光谱信号采集系统进行了基本功能验证,证明了系统的稳定性和实用性;分别测试了基于电弧放电法制备的光纤微球腔与基于超精密抛光法制备的氧化硅晶体微盘腔。采集了光纤微球腔和氧化硅晶体微盘腔的透射谱,并对其模式谱线进行追踪。结果表明：光纤微球腔的Q值达到2.26×10⁶,氧化硅晶体微盘腔的Q值达到10⁹;采集系统具有很好的消噪功能,模式谱线能长时间保持稳定。针对超高Q值光学微腔开发的光谱信号采集系统具有很高的可靠性,可用于微腔光子学系统以及后续微腔传感应用开发。     

耦合光学微腔的频率调谐过程分析

不同的频率失谐会在耦合光学微腔激发出不同的工作模式.以两个耦合光场的非线性薛定谔方程为理论模型,分别研究了失谐参量正调谐和负调谐过程中微腔内光场的变化.理论分析结果表明,在正失谐区域中,腔内光场可由多脉冲形式演变为亮孤子,但亮孤子存在范围较小,当失谐参量过大时,腔内光场会演化为直流分布.在负失谐区域,腔内可以形成较高功率"图灵环"形式的光场.当耦合微腔没有发生频率失谐,或者失谐参量接近0时,腔内只能形成混沌形式的光场分布.当耦合微腔内激发出光孤子后,通过选取合适的失谐参量和抽运功率,可在腔内维持稳定的亮孤子.此外还可通过继续调谐第一个微腔的失谐参量,将亮孤子转变为低功率的"图灵环".理论分析结果对耦合微腔的实验研究具有重要意义.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.