Simultaneous high performance liquid chromatographic determination of vanadium, nickel, iron and copper in crude petroleum oils using bis(acetylpivalylmethane)ethylenediimine as a complexing reagent

A method is described for the simultaneous high performance liquid chromatographic (HPLC) determination of copper, iron, nickel and vanadium, based on complexation of analytes by bis(acetylpivalylmethane)ethylenediimine (H(2)APM(2)en) followed by solvent extraction and HPLC separation on a reversed-phase. C-18, 5 microm column with UV detection at 260 nm. The method has been applied to the determination of metals in crude petroleum oils collected from the South Indus Basin oil fields. The results obtained are compared with those obtained by flame atomic absorption spectrometry.     

High performance liquid chromatographic determination of copper(II) and nickel(II) by using solvent extraction and bis(acetylpivalylmethane)ethylenediimine as complexing reagent

The reagent bis(acetylpivalylmethane)ethylenediimine has been examined for the HPLC separation of copper(II), nickel(II), palladium(II) and oxovanadium(IV) chelates on reversed phase HPLC columns (250 x 4 mm) packed with Hypersil ODS, 5 mu and (150 x 3.9 mm) Nova Pak C(18) with guard column. The complexes are eluted with a binary mixture of methanol and water or methanol, acetonitrile and water. Detection is achieved with a UV detector. The solvent extraction procedure is used for the determination of copper and nickel simultaneously at microgram levels, corresponding to ng levels and pg levels respectively, per injection. The method has been applied to the determination of copper and nickel in a coin, nickel-aluminum alloy and water samples.     

High-performance liquid chromatographic determination of uranium using solvent extraction and bis(salicylaldehyde) tetramethylethylenediimine as complexing reagent

The reagent bis(salicylaldehyde)tetramethylethylenediimine has been used for the determination of dioxouranium(VI), based on complexation in aqueous solution at pH 6, followed by extraction in chloroform and HPLC determination on a Hypersil ODS (3 μm) column. The complex was eluted with the ternary mixture methanol-acetonitrile-water (40:30:30, v/v/v), with UV detection at 260 nm. Oxovanadium(IV), iron(III), copper(II), cobalt(II), nickel(II) and palladium(II) were completely separated and did not interfere in the determination of uranium. The linear calibration range and detection limits have been obtained. The method has been applied to the determination of uranium together with copper, iron and nickel in mineral ore samples.     

Effect of ion-pairing modifiers in the separation of cobalt,copper, iron,and palladium by pre-column derivatization and high performance liquid chromatography

Summary Multivariate experiment analyses have been used to determine the behaviour, in high-performance liquid chromatography, of cobalt, copper, iron and palladium complexes with 1-nitroso-2-naphthol-6-sodium sulphonate or 2-nitroso-1-naphthol-6-sodium sulphonate ion-associated before injection or during elution with quaternary ammonium salts, namely TDTMABr, CTMABr, and TDDMBACl.The role of the ion-pairing modifiers was to regulate the capacity factors of the complexed metals. The work-up procedures showed that the elution and separation of the metal complex anions were influenced by the concentration and choice of cationic counter compounds. TDTMABr, CTMABr and TDDMBACl were replaced with inorganic salts, such as sodium sulphate, but there was no evidence of better metal separation than with the organic compounds.The studies showed that complexed metal ions can be separated using endcapped silica or polymer as column packing materials. The result of most-potential value was that gradient elution could be used to minimize retention without dissocation of the ion-associates on the column.     

Liquid chromatographic determination of cobalt(II), copper(II) and iron(II) using 2-thiophenaldehyde-4-phenyl-3-thiosemicarbazone as derivatizing reagent

The complexing reagent 2-thiophenaldehyde-4-phenyl-3-thiosemicarbazone (TAPT) was examined for high performance liquid chromatographic (HPLC) separations of cobalt(II), copper(II) and iron(II) or cobalt(II), nickel(II), iron(II), copper(II) and mercury(II) as metal chelates on a Microsorb C-18, 5-mum column (150x4.6 mm i.d.) (Rainin Instruments Woburn, MA, USA). The complexes were eluted isocratically with methanol:acetonitrile:water containing sodium acetate and tetrabutyl ammonium bromide (TBA). UV detection was at 254 nm. The solvent extraction procedure was developed for simultaneous determination of the metals, with detection limits within 0.5-2.5 mug ml(-1) in the final solution. The method was applied for the determination of copper, cobalt and iron in pharmaceutical preparation.     

HPLC determination of copper(II), cobalt(II) and iron(II) in pharmaceutical preparations using 2-acetylpyridine-4-phenyl-3-thiosemicarbazone derivatizing agent

Summary Cu(II) Co(II) and Fe(II) in pharmaceutical preparations were determined using precolumn derivatization and solvent extraction with 2-acetylpyridine-4-phenyl-3-thiosemicarbazone (APPT) as complexing reagent. Liquid chromatography (LC) was carried out on a reversed phase C-18, column. The complexes were eluted isocratically with acetonitrile-water containing sodium acetate and tetrabutyl ammonium bromide as ion-pairing agents. The results obtained were compared with those using atomic absorption.     

Liquid chromatographic determination of cis-platin as platinum(II) in pharmaceutical preparation, serum and urine samples of cancer patients

Spectrophotometric and high performance liquid chromatographic (HPLC) methods have been developed for the determination of cis-platin and carboplatin based on the pre-column derivatization of platinum(II) with 2-acetylpyridine-4-phenyl-3-thiosemicarbazone. The complex was extracted in chloroform with molar absorptivity of 2.2 × 10⁴ L mol⁻¹ cm⁻¹ at 380 nm. The complex eluted from a Phenomenex C-18 (150 mm × 4.6 mm i.d.) column with methanol:water:acetonitrile:tetrabutyl ammonium bromide (1 mM) (44:30:25:1, v/v/v/v) with a flow rate of 1 ml/min and UV detection at 260 nm. Ruthenium(IV) and selenium(IV) also separated completely. The linear calibration curve was with 0.5-12.5 μg/ml and detection limit of 10 ng/ml platinum(II).The analysis of cis-platin and carboplatin injections by spectrophotometric and HPLC methods indicated relative standard deviation (R.S.D.) of 0.66-2.1%. The method was used for the determinations of cis-platin in serum and urine of cancer patients after chemotherapy and platinum contents were found 148-444 and 50-90 ng/ml with R.S.D. of 0.3-3.0 and 0.6-2.4% for the serum and urine, respectively. The recovery of platinum(II) from serum was 97% with R.S.D. 2.2%.     

Determination of uranium, iron, copper, and nickel from ore samples by MEKC using N,N'-ethylene bis(salicylaldimine) as complexing reagent

An analytical procedure has been developed for the separation of dioxouranium(VI), iron(III), copper(II), nickel(II), cobalt(II), cobalt(III), palladium(II), and thorium(IV) by MEKC using N,N'-ethylene bis(salicylaldimine) (H(2)SA(2)en) as a complexing reagent with total runtime <4.5 min. SDS was used as micellar medium at pH 8 with sodium tetraborate buffer (0.1 M). An uncoated fused-silica capillary with an effective length of 50 cm x 75 microm id was used with an applied voltage of 30 kV with photodiode array detection at 231 nm. Linear calibrations were obtained within 0.111-1000 microg/mL of each element with LODs within 37-325 ng/mL. The developed method was tested for analysis of uranium ore samples indicating its presence within 103-1789 microg/g with RSD within 0.79-1.87%. Likewise copper, nickel, and iron in their combined matrix were also simultaneously determined with RSD 0.4-1.6% (n = 6).     

HPLC determination of copper(II), cobalt(II) and iron(II) in pharmaceutical preparations using 2-acetylpyridine-4-phenyl-3-thiosemicarbazone derivatizing agent

Summary Cu(II) Co(II) and Fe(II) in pharmaceutical preparations were determined using precolumn derivatization and solvent extraction with 2-acetylpyridine-4-phenyl-3-thiosemicarbazone (APPT) as complexing reagent. Liquid chromatography (LC) was carried out on a reversed phase C-18, column. The complexes were eluted isocratically with acetonitrile-water containing sodium acetate and tetrabutyl ammonium bromide as ion-pairing agents. The results obtained were compared with those using atomic absorption.     

Simultaneous solvent extraction and high-performance liquid chromatographic determination of uranium, iron, nickel and copper in mineral ore samples and phosphate rock residues using N,N′-ethylenebis(salicylaldimine) as complexing reagent

The reagent N,N-ethylenebis(salicylaldimine) (H₂SA₂en) has been examined for precolumn derivatization, followed by solvent extraction in chloroform and HPLC determination of uranium, iron, nickel and copper on a Hypersil ODS 3 μm column. Complexes were eluted isocratically using a ternary mixture of methanol-acetonitrile-water and UV detection was at 260 nm. The detection limit was 12 ng/injection for each of the elements. The method has been applied for the determination of metals in mineral ore samples and phosphate rock residues. The results obtained are compared using atomic absorption.     

Membrane sensors for batch and flow injection potentiometric determination of ethamsylate (cyclonamine) in pharmaceutical preparations

The lipophilic nickel(II) and iron(II) bathophenanthroline derivatives of ethamsylate are used as ion-exchangers with high selectivity characteristics for ethamsylate. Poly(vinyl chloride) membrane sensors incorporating these electroactive materials display fast linear response for 1 × 10^–1–1 × 10^–4 M ethamsylate under static and hydrodynamic modes of operation. In an acetate buffer of pH 4, the calibration slope is 51–53 mV/concentration decade and the lower limit of detection is 5.3 g/ml. Except for salicylate and nitrate, most common anions, organic sulfonates, carboxylates, phenolates and various pharmaceutical excipients and diluents do not interfere. Determination of ethamsylate in various dosage forms shows an average recovery of 98.9% of the nominal and a mean standard deviation of 0.7%.     

High performance liquid chromatographic determination of metoclopramide in plasma and urine and its application to biopharmaceutical investigations

An optimized HPLC method for the quantification of metoclopramide (MCP) in human plasma and urine is described. MCP and internal standard are extracted from alkalinized substrate into diethyl ether and back-extracted into dilute acid. The analytes are separated with a ternary mobile phase at cyanopropyl-silica and detected at 312 nm (UV detection). The lower limit of quantification is 0.5 ng/ml in plasma and 50 ng/ml in urine. Optimization of extraction, chromatography, and detection is discussed. The method is selective to numerous common drug substances with excellent accuracy and precision data. After validation, the method is applied to the samples of a pharmacokinetic study. Pharmacokinetic parameters indicate the need for a sophisticated method as tool for optimization of metoclopramide formulations.     

Complexometric determination of copper(II) in ores,alloys and complexes using 2-mercaptoethanol as indirect masking reagent

A complexo-titrimetric method for the determination of copper(II) in the presence of other metal ions is described, based on the selective masking ability of 2-mercaptoethanol towards copper(II). Copper and other ions in a given sample solution are initially complexed with an excess of EDTA and the surplus EDTA is titrated with zinc sulfate solution at pH 5.0–6.0 (hexamine), using xylenol orange as indicator. A known excess of 2-mercaptoethanol solution (10%) is then added, the mixture is shaken well and the released EDTA from the Cu-EDTA complex is titrated against standard zinc sulfate solution. The interferences of various ions are studied and the method is applied to the determination of copper in its ores, alloys and complexes. Reproducible and accurate results are obtained for 2.5–40 mg of Cu with relative errors 0.4% and standard deviations 0.04 mg.     

Application of a poly(dithiocarbamate) resin to the determination of trace copper,iron and zinc in natural waters

A chelating poly(dithiocarbamate) resin with macroreticular support is shown to be effective for the preconcentration of copper, iron and zinc in natural waters. The retained ions can be eluted efficiently in 5 ml of 8M nitric acid from 1–20-cm columns of resin.This poly(dithiocarbamate) resin is used for the preconcentration and determination of copper, iron and zinc by flame atomic absorption spectrophoto-metry. Common ions present in natural waters do not interfere. The detection limits were 0.50, 0.21 and 0.04 g 1^–1 for Cu, Fe and Zn respectively.     

2,2′-Dihydroxybenzophenone thiosemicarbazone as a spectrophotometric reagent for the determination of copper,cobalt, nickel,and iron trace amounts in mixtures without previous separations

2,2′-Dihydroxybenzophenone thiosemicarbazone forms complexes with Cu(II) (λ_max = 385 nm, ? = 8.60 × 10³ liter · mol^?1 · cm^?1); Ni(II) (λ_max = 380 nm, ? = 15.4 × 10³ liter · mol^?1 · cm^?1); Co(II) (λ_max = 380 nm, ? = 12.3 × 10³ liter · mol^? · cm^?1); and Fe(III) (λ_max = 365 nm, ? = 7.9 × 10³ liter · mol^?1 · cm^?1) and have been applied to the analysis of these metal ions in binary, ternary, and quaternary mixtures. The determination procedures are based exclusively on the different pH values of the formation complexes, hence the extraction step is not necessary.     

Qualitative and quantitative 1H NMR spectroscopy for determination of divalent metal cation concentration in model salt solutions,food supplements,and pharmaceutical products by using EDTA as chelating agent

This paper introduces an ¹H NMR method to identify individual divalent metal cations Be²⁺, Mg²⁺, Ca²⁺, Sr²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Sn²⁺, and Pb²⁺ in aqueous salt solutions through their unique signal shift and coupling after complexation with the salt of ethylenediaminetetraacetic acid (EDTA). Furthermore, quantitative determination applied for the divalent metal cations Ca²⁺, Mg²⁺, Hg²⁺, Sn²⁺, Pb²⁺, and Zn²⁺ (limit of quantification: 5–22 μg/ml) can be achieved using an excess of EDTA with aqueous model salt solutions. An internal standard is not required because a known excess of EDTA is added and the remaining free EDTA can be used to recalculate the quantity of chelated metal cations. The utility of the method is demonstrated for the analysis of divalent cations in some food supplements and in pharmaceutical products.     

High performance liquid chromatography analysis of aliphatic thiols in alimentary supplements and pharmaceuticals using menadione as a new useful derivatization reagent

The use of menadione (MD) as a pre-column reagent for high performance liquid chromatography (HPLC) analysis of aliphatic thiols is proposed. The reaction was carried out for 5 min at room temperature and pH 8.5. The developed method was applied to the N-acetylcysteine (NAC) analysis of alimentary supplements and pharmaceutical formulations. The effect of the complex matrix was evaluated by the study of the thiol derivatization reaction both in standard and in placebo solutions. The yield of NAC-MD adduct was found to be quantitative at a reagent to thiol molar ratio of about 4 in comparison with an authentic specimen of synthesized NAC adduct, which was characterized by ¹H NMR, IR and UV. The routine chromatographic separations were performed on a Synergi MAX-RP column using a mobile phase consisting of methanol/triethylammonium (TEA) phosphate buffer (pH 3; 0.05 mol L⁻¹) 70:30 (v/v) at a flow-rate of 0.4 mL min⁻¹. UV-diode array detection was used setting the wavelength at λ = 260 nm. The validation parameters such as linearity, sensitivity, accuracy, precision, selectivity and ruggedness were found to be highly satisfactory. Similar linear responses were observed by standard and placebo solutions (determination coefficient: 0.9996). Limit of detection was about 0.019 μg g⁻¹. Intra-day precision (relative standard deviation, R.S.D.) was ≤0.81% for NAC to internal standard (IS) peak area ratio, ≤0.28% and ≤0.32%, respectively, for NAC and IS retention times (t_R), without significant differences between intra- and inter-day data. NAC recovery studies gave good results (100.12%) with R.S.D. = 1.05%.     

High performance liquid chromatography post-column chemiluminescence determination of sulfonamide residues in milk at low concentration levels using bis[4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl] oxalate as chemiluminescent reagent

The determination of seven sulfonamides by means of HPLC with chemiluminescence detection is proposed for the first time. The analytes are derivatized with fluorescamine, separated and subsequently they participate in the post-column chemiluminescence (CL) peroxyoxalate system using imidazole as a catalyst. Among the different peroxyoxalates tested, bis[4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl] oxalate provides higher sensitivities and stabilities, avoiding precipitation problems. A rigorous optimization of the significant variables by means of experimental designs has been developed in order to reconcile the chromatographic conditions with the CL reaction. The method provides detection limits in the low microgl(-1) range and has been satisfactorily applied to the analysis of spiked raw milk samples.     

A rapid spectrophotometric method for the determination of cobalt in industrial, environmental, biological, pharmaceutical and soil samples using bis(5-bromosalicylaldehyde)orthophenylenediamine

A very simple, ultra-sensitive and fairly selective spectrophotometric method is presented for the determination of cobalt at trace levels using bis(5-bromosalicylaldehyde)orthophenylenediamine (BBSOPD). The method is based on the reaction of nonabsorbent BBSOPD in a slightly acidic (0.001–0.0025 M H₂SO₄ or pH 3.4–4.0) and 50% N,N-dimethylformamide media with cobalt(II) to produce a highly absorbent orange colored chelate-product with an absorption maximum at 473 nm. The reaction is instantaneous and the absorption remains stable for 24 h. The average molar absorption coefficient and Sandell’s sensitivity were found to be 5.84 × 10⁴ l mol^-1 cm^-1 and 9.0 ng cm^-2 of cobalt(II), respectively. Linear calibration graphs were obtained for 0.02–4.0 mg l^-1 of Co(II). The stoichiometric composition of the chelate is 1:1 (Co(II):BBSOPD). A large excess of over 50 cations, anions and complexing agents do not interfere in the determination. The method was successfully used for the determination of cobalt in several standard reference materials (steels and alloys), environmental waters (potable and polluted), biological samples (human blood and urine), pharmaceutical and soil samples and solutions containing both cobalt(II) and cobalt(III) as well as some complex synthetic mixtures. The method has high precision and accuracy.     

纤维素-三（4-甲基苯甲酸酯）手性固定相拆分5种芳基丙酸类药物对映体及其制剂的含量测定

采用纤维素-三（4-甲基苯甲酸酯）（CTMB）手性固定相,利用反相色谱法研究了氟比洛芬、普拉洛芬、布洛芬、萘普生、洛索洛芬5种芳基丙酸类手性药物的色谱拆分行为。考察了流动相组成、酸碱添加剂及柱温对上述5种药物对映体分离的影响,并通过热力学研究及对映体结构分析对CTMB固定相的手性拆分机理进行了探讨。结果表明,除萘普生采用乙腈-0.1%（v/v）甲酸溶液外,以甲醇-0.1%（v/v）甲酸水溶液为流动相可使普拉洛芬、洛索洛芬、氟比洛芬和布洛芬的对映体间的分离度均大于1.5,CTMB固定相对这5种芳基丙酸类药物的手性拆分能力依次为普拉洛芬>洛索洛芬>氟比洛芬>布洛芬>萘普生。在各自的优化色谱条件下,将方法应用于上述5种药物制剂的含量测定,结果令人满意。