Ultrafiltration membranes based on interpolyelectrolyte complexes: Adsorption and mass-exchange properties

Ultrafiltration membranes based on interpolyelectrolyte complexes of a sulfonated aromatic copolyamide, an acrylonitrile–N,N-dimethyl-N,N-diallylammonium chloride copolymer, and poly-N,N-dimethyl-N,N-diallylammonium chloride were prepared. The adsorption (in batch experiments and under conditions of ultrafiltration of myoglobin, lysozyme, and bovine serum albumin solutions) and mass-exchange properties of the membranes were studied. Correlation between the procedure for performing the interpolymer reaction, the composition of the complexes formed, and the characteristics of the membranes prepared was found. The protein/membrane interaction in the system studied is mainly due to Coulomb forces. The effect of the protein adsorption on the separation and transport properties of the membranes was considered. The general level of the mass-exchange properties of the membranes based on the interpolyelectrolyte complexes is higher compared to the samples containing ionic groups of like charge.     

Effect of the procedure for preparing porous membranes based on interpolyelectrolyte complexes on their structure,surface morphology,and surface electrical properties

Ultrafiltration membranes based on interpolyelectrolyte complexes of sulfonate-containing aromatic copolyamide, acrylonitrile–N,N-dimethyl-N,N-diallylammonium chloride copolymer, and poly-N,N-dimethyl-N,N-diallylammonium chloride were prepared. Their structure and surface electrical properties were studied. The correlation between the procedure for performing the interpolymer reaction, the degree of conversion, the composition of the resulting complex, and the membrane characteristics was revealed. The electrokinetic potential of the membrane specimens varies in the interval from–35.2 to +3.1 mV. The interpolymer compound composition, surface electrical properties of the membranes, and their activity in sorption of base and acid dyes correlate with each other. Therefore, it is appropriate to use these dyes as test systems for determining the nature and concentration of free ionic groups. The effect of the membrane preparation procedure on the charge distribution pattern on the membrane separation surface is considered.     

Optically active polymeric salts prepared from amino acids and polysulfonylpyrrolidinium chloride

Possibility of preparing optically active polymers from N,N-diallyl-N,N-dimethylammonium chloride-sulfur dioxide copolymer and optically active acids was studied by the ion-exchange method.     

Effects of concentration and pH on the thermosensitive behavior of a graft copolymer with polyimide backbone and poly(<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylamino-2-ethyl methacrylate) side chains

Aqueous solutions of the graft copolymer with a polyimide backbone and poly(N,N-dimethylamino-2-ethyl methacrylate) side chains with a molecular mass of M = 4.7 × 10⁵ and a grafting density of side chains of 0.44 are investigated by light scattering and turbidimetry. Solutions are studied in a wide concentration range of 0.0008–0.0250 g/cm³ at рН values varying from 2 to 12 for each concentration. The temperature dependences of optical transmission, scattered light intensity, and hydrodynamic radii of scattering objects are obtained. It is shown that the copolymer is thermosensitive only at pH > 8.0. A decrease in acidity of the medium at a fixed concentration of the copolymer is accompanied by a decline in temperatures corresponding to the onset and end of phase separation Т ₁ and Т ₂, leading to the narrowing of this interval. At constant рН values, temperatures Т ₁ and Т ₂ rise with solution dilution, while the phase transition interval becomes wider.     

Copolymer of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride with maleic acid as drug carrier

A copolymer of N,N-diallyl-N,N-dimethylammonium chloride with maleic acid of constant composition was prepared under the conditions of radical initiation. The possibility of the functionalization of the copolymer with drugs containing amino groups by polymer-analogous transformations was examined. Conditions were found for preparing conjugates of the copolymer with isoniazid. The structures and the quantitative compositions of the conjugates were determined by ¹³С NMR spectroscopy, and the possibility of preparing conjugates with controlled drug content was demonstrated.     

Thermo- and pH- dual responsive inorganic-organic hybrid hydrogels with tunable luminescence

A thermo- and pH- dual responsive luminescent hydrogel was successfully constructed by coupling dysprosium-containing polyoxometalates Na₉DyW₁₀O₃₆ (DyW₁₀) with the ABA triblock copolymer, where the B block is PEO and the A block is the thermosensitive poly(methoxydi(ethylene glycol) methacrylate-co-N,N-dimethylaminoethyl methacrylate). The complex hybrid underwent a sol-gel phase transition above the lower critical solution temperature (LCST) of the A block. DyW₁₀ was electrostatically encapsulated into the hydrophobic domain of the A block with enhanced photoluminescence. When temperature cooled down, the luminescence could be restored. By addition of acids to protonate the A block, and emission of DyW₁₀ was simultaneously enhanced. Sensitivity of poly(N,N-dimethy laminoethyl methacrylate) (PDMAEMA) to pH also enabled the emission of DyW₁₀/copolymer hydrogel to be reversibly switched by alternating acid/base treatments.     

Preparation of a Sulfoalkylbetaine-Based Zwitterionic Monolith with Enhanced Hydrophilicity for Capillary Electrochromatography Separation Applications

A novel monolithic stationary phase based on in situ copolymerization of zwitterionic monomer N,N-dimethyl-N-methacryloxyethyl-N-(3-sulfopropyl) ammonium betaine (DMMSA), pentaerythritol triacrylate (PETA), either methacrylatoethyl trimethyl ammonium chloride (META) or sodium 2-methylpropene-1-sulfonate (MPS) was designed as a multifunctional separation column for hydrophilic interaction capillary electrochromatography (HI-CEC). A significantly enhanced hydrophilicity was obtained on the poly(DMMSA-co-PETA-co-META or MPS) monolith, which was contributed by the high percentage of DMMSA in the polymerization mixture. A column efficiency of 200,000 plates/m was obtained and the monolithic column also displayed a satisfactory repeatability in terms of migration time with RSD values less than 1.1% (intra-day, n = 5) and 2.0% (inter-day, n = 3). Most importantly, the column was successfully applied to separation of a pool of neurotransmitters which are not well separated on commercial HILIC packing materials. A baseline separation of the 12 model components was obtained with good selectivity, symmetrical peak shape and high column efficiency with BGE consisting of 20 mM ammonium formate (pH 3.0) in ACN/H₂O (80/20, v/v).     

Alkylation of 2-(methylsulfanyl)-6-polyfluoroalkylpyrimidin-4(3<Emphasis Type="Italic">H</Emphasis>)-ones with haloalkanes

The alkylation of ambident anions of 2-(methylsulfanyl)-6-(polyfluoroalkyl)pyrimidin-4(3H)-ones with 4-bromobutyl acetate leads to concurrent formation of O- and N-(4-acetoxybutyl) derivatives. Polar aprotic solvents favor formation of the O-isomer, and weakly polar dioxane favors N-alkylation. The reaction of 2-(methylsulfanyl)-6-(trifluoromethyl)pyrimidin-4(3H)-one with an equimolar amount of 1,2-dibromoethane in polar acetonitrile gives a mixture of N,N-, O,O-, and N,O-bridged bis-pyrimidines, as well as N- and O-[2-(methylsulfanyl)ethyl] derivatives, whereas in the presence of 10 equiv of 1,2-dibromoethane the N,O-isomer is formed as the only product. The reaction in weakly polar tetrahydrofuran yields N,N- and N,O-bispyrimidines.     

Synthesis of organic–inorganic sorbent containing phenylboronic acid as glucose-binding ligand

A copolymer with N-allylaminophenylboronic acid has been synthesized from a water-soluble N-vinylpyrrolidone–acrolein diethyl acetal copolymer. Immobilization of the obtained copolymer on silica gel afforded an organic–inorganic sorbent capable of sorbing glucose from model solutions.     

Effect of pH on the Behavior of a Random Copolymer of Acrylamide

A temperature- and pH-sensitive random copolymer of N-[3-(diethylamino)propyl]-N-methylacrylamide] and N,N-diethylacrylamide was obtained. The copolymer contained 20 mol % of amine units and had a molecular weight of 3.3 × 10⁴. Buffer solutions containing 0.0102 g/cm³ of the synthesized copolymer were studied in the pH range of 7–13.5 by light scattering and turbidimetry. At low temperatures, macromolecules and large aggregates coexist in the solutions. The copolymer is temperature- and pH-sensitive in the studied pH range. The temperature and the width of the phase separation interval increase with increasing acidity of the medium.     

Effect of donor and acceptor properties of solvents on the kinetics of photoreduction of sterically hindered <Emphasis Type="Italic">о</Emphasis>-benzoquinones

Effect of the solvent nature on the kinetics of photoreduction of 3,6-di-tert-butyl-1,2-benzoquinone and its six derivatives in the presence of N,N-dimethylaniline and 4-(N,N-dimethylamino)benzaldehyde has been investigated. It has been found that for the о-quinone—amine pair, for which the free energy change of electron transfer is ΔG_e > +0.11 eV, the rate constant of о-quinone photoreduction k_H decreases proportionally to the increase in the acceptor number of the solvent. For the о-quinone—amine pair with ΔG_e < +0.11 eV, the k_H value decreases proportionally to the increase in the donor number of the solvent. It has been established that the enhancement of the electron-acceptor properties of the solvent leads to the emergence of kinetic isotope effect for the reactant pairs of 3,6-di-tert-butyl-1,2-benzoquinone and 4,5-dimethoxy-3,6-di-tert-butyl-1,2-benzoquinone with N,N-di-methylaniline (ΔG_e = +0.11 and +0.22 eV, respectively).     

2-(2-Hydroxyphenyl)imidazolidines and their O-phosphorylated derivatives

2-(2-Hydroxyaryl)imidazolidines were synthesized by reaction of aromatic carbonyl compounds with N,N′-dialkylethylenediamines. The title compounds were also prepared using the corresponding Schiff bases instead of carbonyl compounds. Phosphorylation of 2-(2-hydroxyphenyl)imidazolidines with phosphoryl and phosphorothioyl chlorides and phosphorochloridites was accomplished. The reaction of O-phosphorylsalicylaldehyde with N,N′-dialkylethylenediamines also afforded 2-(2-hydroxyphenyl)imidazolidines.     

Thermoresponsive behavior of water-salt solutions of a graft copolymer with a main polyimide chain and side poly(<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylamino-2-ethyl methacrylate) side chains

The water-salt solutions of the graft copolymer bearing a polyimide main chain and poly(N,N-dimethylamino-2-ethyl methacrylate) side chains (M = 4.7 × 10⁵, the density of grafting with side chains z = 0.44) are studied by static and dynamic light scattering and turbidimetry. The solutions are investigated in a tenfold range of NaCl concentrations (from 0.015 to 0.15 mol/L) at the polymer concentration from 0.002 to 0.015 g/cm³ and pH from 8 to 12. The temperature dependences of the intensity of scattered light, optical transmission, hydrodynamic radius of scattering objects, and their concentrations in solutions are derived. The temperatures of phase separation onset T ₁ and end T ₂ are determined. It is shown that an increase in the salt content in solution leads to reduction in the polymer solubility and in temperatures T ₁ and T ₂. The watersalt solutions retain all the regularities of phase-separation temperature variation observed for aqueous solutions with change in the concentration of solution and pH of a medium: the values of T ₁ and T ₂ increase upon dilution and growth of acidity.     

Viscosities and Surface Tensions of Phenetole with <Emphasis Type="Italic">N</Emphasis>-Methyl-2-pyrrolidone, <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Dimethylformamide and Tetrahydrofuran Binary Systems at Three Temperatures

Viscosities, η, and surface tensions, σ, of binary systems of phenetole (ethoxy benzene or ethyl phenyl ether) with N-methyl-2-pyrrolidone, N,N-dimethylformamide or with tetrahydrofuran were measured over the entire mole fraction range and at (298, 303 and 308) K. The experimental data was used to compute the deviations in viscosity, Δη, and surface tension, Δσ. Values of the excess Gibbs energy of activation G*^E, surface entropy S _σ and surface enthalpy H _σ were calculated. Viscosity data of the binary systems were calculated using the Grunberg and Nissan and the three-body and four-body McAllister correlations. The Redlich–Kister method was used for evaluation of coefficients and standard deviations for Δη, Δσ and G*^E. The results were interpreted in terms of the probable effect of molecular interactions between components as well as polarity.     

Graphene oxide promoted synthesis of <Emphasis Type="Italic">p</Emphasis>-phenylenediamine antioxidants

Three p-phenylenediamine antioxidants (p-phenylenediamine-N,N,N′,N′-tetrapropionic acid tetramethyl ester, p-phenylenediamine-N,N,N′-tripropionic acid trimethyl ester, and p-phenylenediamine-N, N′-dipropionic acid dimethyl ester) were successfully synthesized via atom-economic aza-Michael addition of pphenylenediamine to methyl acrylate p-romoted by graphene oxide in water. The synthesized compounds were characterized by NMR, ESI-MS spectra, and elemental analyses. The effects of the solvent and graphene oxide on the reaction were investigated.     

Cycloaminomethylation of dihydric phenols catalyzed by <Emphasis Type="Italic">d</Emphasis>- and <Emphasis Type="Italic">f</Emphasis>-metal compounds

An efficient method has been developed for the synthesis of 7,16,25-triaryl-7,8,16,17,25,26-hexahydro-6H,15H,24H-tribenzo[f,m,t][1,5,8,12,15,19,3,10,17]hexaoxatriazacyclohenicosines, 3,8-diaryl-2,3,4,7,8,9-hexahydrobenzo[1,2-e:4,3-e′]bis[1,3]oxazines, 3,9-bis(chlorophenyl)-3,4,9,10-tetrahydro-2H,8H-benzo[1,2-e:3,4-e′]bis[1,3]oxazines, and 2,9-bis(chlorophenyl)-1,2,3,8,9,10-hexahydrobenzo[1,2-e:6,5-e′]bis-[1,3]oxazines via cycloaminomethylation of pyrocatechol, resorcinol, and hydroquinone with N,N-bis(methoxymethyl) anilines in the presence of samarium catalysts.     

Synthesis and biological activity of arylaliphatic <Emphasis Type="Italic">N</Emphasis>-(2-aminoethyl)-<Emphasis Type="Italic">N</Emphasis>-(2-hydroxy-2-phenylethyl)carboxamides

N-(2-Aminoethyl)-N-(2-hydroxy-2-phenylethyl)carboxamides were synthesized from styrene oxide by ring opening with N,N-disubstituted ethylenediamines followed by N-acylation. Synthesized compounds have pronounced antiarrhythmic activity and low toxicity.     

3-(1-Methyl-1-nitroethyl-1-<Emphasis Type="Italic">ONN</Emphasis>-azoxy)-4-aminofuroxan. Synthesis and transformations of the amino group

A four-step procedure to convert 4-(1-methyl-1-nitroethyl-1-ONN-azoxy)-3-cyanofuroxan into 3-(1-methyl-1-nitroethyl-1-ONN-azoxy)-4-aminofuroxan was developed. The pathways of transformation of the amino group of the synthesized compound into N-nitramino-, N-alkyl-N-nitramino-, N,N’-methylenediamino-, N,N’-methylene-N,N’-dinitramino-, and azo groups were studied.     

NMR Study of the graphite–<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylformamide system after ultrasonication

A suspension formed as a result of ultrasonication of a mixture of graphite with N,N-dimethylformamide has been studied by ¹H NMR spectroscopy. The dependence of the width of the ¹H NMR signal on the N,N-dimethylformamide content of the suspension has been determined.     

Cyclization of trifluoro-<Emphasis Type="Italic">N</Emphasis>-(prop-2-yn-1-yl)methanesulfonamides to <Emphasis Type="Italic">N</Emphasis>-(hydroxymethyl)-1,2,3-triazoles

Three-component heterocyclizations of trifluoro-N-(prop-2-yn-1-yl)methanesulfonamide, trifluoro-N-pheny-N-(prop-2-yn-1-yl)methanesulfonamide, and trifluoro-N,N-di(prop-2-yn-1-yl)methanesulfonamide with formaldehyde and sodium azide afforded N-{[2-(hydroxymethyl)-2H-1,2,3-triazol-4-yl]methyl}-, N-{[2-(hydroxymethyl)-2H-1,2,3-triazol-4-yl]methyl}-N-phenyl-, and N,N-bis{[2-(hydroxymethyl)-2H-1,2,3-triazol-4-yl]methyl}trifluoromethanesulfonamides as the major products together with minor 1-(hydroxymethyl)-1H-1,2,3-triazole isomers.