Excitation of seismoacoustic waves by a harmonic force source acting at the boundary of a liquid layer and an elastic halfspace

A problem on the excitation of seismoacoustic waves in a system of a homogeneous isotropic elastic halfspace covered with a liquid layer is solved in the case of action of a source of point harmonic force on the surface of an elastic medium. Integral expressions are obtained for the radiation powers averaged over a wave period for longitudinal and transverse waves in a solid. Mode excitation is analyzed in detail. Expressions describing parts of the mode powers radiated into a liquid layer and an elastic medium are obtained. Numerical analysis of radiation powers is conducted for spherical longitudinal and transverse waves as well as for the radiation powers of seismoacoustic modes in a solid halfspace and a liquid layer. It is determined that in the conditions characteristic of bottom rocks in the case, where the basin depth is several times and more larger than the sound’s wavelength, about 2/3 of the total power is radiated into a liquid.     

Excitation of Surface and Leaky Waves on a Solid Body – Gas Interface

We analyze excitation of bulk, leaky, and surface waves by a point time-harmonic forcing applied perpendicularly to a solid body – gas interface. The case where the sound speed in the gas is less than the Rayleigh-wave velocity on the solid surface is considered. Expressions for the radiation powers of longitudinal and transverse spherical waves in the solid body and of a Stoneley surface wave, averaged over their periods, are derived. Excitation of a spherical acoustic wave in the gas and a pseudo-Rayleigh leaky wave is analyzed. For the spatial region corresponding to zenith angles exceeding the arcsine of the ratio of the sound speed in the gas and the transverse-wave velocity in the solid body, where the leaky-wave energy is transformed into the acoustic wave, we derive formulas describing their summed radiated power.     

磁致伸缩换能器辐射板形状对声场分布的影响

磁致伸缩换能器可作为热声制冷机的声源装置,辐射板的形状直接影响声压输出效率,从而影响制冷效果。为提高换能器工作效率、减小换能器体积,辐射板需在Terfenol-D棒的激励下产生大振幅、高频率的活塞振型。针对这一问题,应用ATILA软件分析了磁致伸缩换能器辐射板形状对谐振腔振动幅频特性的影响以及对谐振腔内声场分布的影响。结果表明:相同激励条件下,凹球面辐射板出现活塞振型时振幅最大,对应谐振腔中声压幅值最高;谐振腔端面形状为凹球面时,具有聚焦声压幅值的作用;端面形状为凹发射端-凸反射端组合的谐振腔内声压幅值最高。以上结论为合理设计辐射板、谐振腔两端面组合形状提供了参考。     

Energy distribution between seismic waves of different types produced in an elastic half-space by a source with an arbitrary radiation pattern

The energy distribution between different types of seismic waves produced by a source of longitudinal and transverse waves with an arbitrary radiation pattern in an elastic half-space is considered. With an appropriate choice of the angular distribution functions, this source can model an earthquake source. A direct theoretical comparison of the energy distributions of seismic waves generated by an underground explosion and an earthquake is carried out. Analytical relationships that describe the dependence of the energy distribution between different types of waves on the parameters of the medium and the source are derived.     

The radiation Q factors obtained from the partial derivatives of the phase of the reflection coefficient of an elastic plate

The phase gradient method is applied to study the partial derivatives of the phase of the reflection coefficient of a fluid-loaded elastic plate. We consider the derivatives with respect to the frequency f, the incidence angle theta, the phase velocities of the longitudinal and transverse waves propagating in the plate, cL and cT, respectively, and the phase velocity in the fluid cF. The partial derivatives with respect to f, cL, cT, cF are linked by a relation involving products of one of these variables with the corresponding partial derivative. At a resonance frequency, the product of frequency with the frequency phase derivative can be identified as a radiation quality factor. By analogy, the other products correspond to quality factors. It can be shown that the product assigned to the fluid phase velocity corresponds to an angular radiation quality factor. The products assigned to the longitudinal and transverse phase velocities are identified as longitudinal and transverse radiation quality factors. These quality factors are shown to be related to stored energies associated with either standing waves across the plate, guided waves, longitudinal waves or transverse waves. A reactive power balance between the plate and the fluid is also established.     

Transition radiation of seismic waves at the atmosphere-earth interface

The method of contour integration is used for solving the problem of transition radiation of elastic waves by a mass source, which travels uniformly in a gas normal to the interface between homogeneous gaseous and elastic halfspaces and disappears at the time it touches the solid surface. We have obtained asymptotic formulas for the field of transition radiation, which hold true near the fronts of longitudinal and transverse spherical waves and a conical wave. An exact analytical expression for the field of transition radiation has been obtained for the observation points located on the source trajectory extension in a solid. The influence of interaction between longitudinal and transverse waves, which occurs on the surface of elastic medium, on the space distribution of the field of transition radiation is analyzed. Radiophysical Research Institute, Nizhny Novgorod, Russia. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 40, No. 10, pp. 1210–1223, October, 1997.     

Characteristics of Biot waves produced by a vibration exciter in a fluid-saturated medium

Results of a theoretical calculation of the directional characteristics of elastic waves excited by an oscillating point force in a fluid-saturated porous medium are presented. Based on Boit’s theory and the theory of elementary acoustic sources, the wave amplitude and radiation power are calculated for two kinds of longitudinal waves and the transverse wave. An analysis of the spatial angular characteristics of elastic waves is performed for two types of rock, namely, water-and gas-saturated sandstones. The angular distributions of vibrations in the solid and liquid (gaseous) phases of the medium and the frequency dependences of the radiation power associated with each of the three types of acoustic waves are presented in graphical form.     

Parametric scattering of high-frequency elastic waves by a small spherical cavity oscillating under the action of a Rayleigh wave

Scattering of high-frequency transverse and longitudinal plane waves incident on a spherical cavity located at a small depth under the surface of a half-space is considered. The cavity oscillates as a whole in the field of a low-frequency Rayleigh surface wave, the oscillation vectors of the longitudinal, transverse, and surface waves being coplanar. The cavity radius is assumed to be small compared to the wavelengths of the sounding wave and the pumping surface wave. The scattered compression and shear waves at the combination frequencies ω±Ω are calculated in the dipole approximation. Expressions obtained describe the qualitative behavior of the combination-frequency signal levels produced at the outputs of horizontally and vertically oriented geophones moving over the free surface of the elastic half-space.     

Bichromatic frequency conversion in potassium niobate

Two frequency components of an IR laser beam near 980 nm are simultaneously coupled into two adjacent longitudinal modes of a passive ring resonator. A potassium niobate crystal inside the resonator converts the circulating IR light into coherent blue radiation. The total conversion efficiency is enhanced by a factor of 1.4 compared with that of conventional single-mode intracavity second-harmonic generation with the same circulating total power, and we obtain a total output power of 560 mW from 780-mW IR light incident upon the cavity. The spectra of the generated blue radiation and the circulating IR light contain a number of equidistant frequency components that are due to consecutive sum- and difference-frequency mixing.     

Planar orotron experiments in the millimeter-wavelength band

The planar orotron is introduced and shown to be a viable source of moderate power and of millimeter and submillimeter wavelength radiation. The resonator is a slow-wave structure consisting of a rectangular metal grating which is opposed by a planar conducting boundary. The device operates in the surface harmonic mode: electrons interact with axially traveling waves which evanesce above the grating surface, and the amplified radiation leaves the resonator in parallel with the beam axis. Operation in both the forward and backward mode is possible. The resonator cavity is designed to enhance longitudinal reflections, and thereby enhance the output power and efficiency. The output frequency and tuning range are determined by the grating parameters. Experiments performed in the backward mode have produced radiation from 30 to 110 GHz at power levels ranging from 100 W to 2 kW. The efficiencies vary from 1 to 7%. The measured frequencies are closely predicted by a theory which is also presented     

Acoustoseismic wave fields generated by surface seismic vibrators

Results of experimental and theoretical studies of acoustoseismic wave fields generated by surface seismic vibrators are presented. In experiments with high-power seismic vibrators operating in a frequency range of 5–10 Hz, acoustic waves were recorded at distances up to 50 km from the source. The long-range sound propagation from seismic vibration sources was observed in a near-surface waveguide arising due to temperature inversion. The effect of the acoustoseismic induction, i.e., excitation of surface seismic waves by the acoustic wave arriving from the vibrator, was also detected. The results of mathematical modeling of the acoustoseismic field generation by an operating seismic vibrator are presented. They include the modeling of the radiation of a harmonic acoustic wave’s by the vibrator, its trapping by the near-surface waveguide, the long-range low-frequency acoustic wave propagation in the presence of the waveguide, and the induction of a surface seismic wave by the arriving harmonic acoustic wave. It is shown that a seismoacoustic wave propagating at the boundary between the elastic earth and the atmosphere is an analog of the Stonely wave that appears in the presence of a near-surface low-temperature layer in the atmosphere.     

The radiation power of elastic waves excited in a solid half-space by a subsurface time-harmonic source

The method of Fourier transforms is used to solve the problem of excitation of longitudinal, transverse, and Rayleigh surface waves by a time-harmonic point source placed in a homogeneous isotropic, perfectly elastic half-space and acting along the normal surface. Expressions for the time-average radiation powers of the aforementioned waves are obtained by the method of radiation reaction without using any approximations. The distribution of radiation power over different types of waves depending on their velocities and the source’s depth is investigated in detail.     

Excitation of the acoustic and leaky waves in the atmosphere by a sub-surface seismic source

We study excitation of acoustic, leaky, and surface waves by a time-harmonic force source located in a homogeneous isotropic elastic half-space contacting a homogeneous gas. The force acts in the normal direction to the interface between the media. We consider the case where the sound velocity in the gas is less than the velocity of the Rayleigh wave propagating along the surface of the solid. An expression is derived for the period-averaged radiation power of the surface Stoneley wave. The total radiation power is calculated for the acoustic wave in the gas and for the leaky pseudo-Rayleigh wave. Variations in the radiation powers of the surface and leaky waves are analyzed as functions of the source depth. If the velocities of compressional and shear waves in the elastic medium significantly exceed the sound velocity in the gas, then the radiation power of the Stoneley wave turns out to be a factor of 10⁶–10⁸ smaller than the radiation powers of other waves. The radiation power of the Stoneley wave decreases monotonically with increasing source depth, and the decrease becomes more pronounced with the increase in the difference between the acoustic impedances of the contacting media. If the shear-wave velocity in the solid is close to the sound velocity in the gas, then the radiation power of the Stoneley wave is comparable with the radiation powers of other waves and exhibits maximum at a certain source depth. For some parameters of the gas and the solid, and for certain source depths, the Stoneley wave carries away more than a half of the total radiation power. It is shown that, for certain relations between the parameters of the media, the radiation power of the Stoneley wave increases due to redistribution of the radiated power from the pseudo-Rayleigh leaky wave. The total power of these waves remains approximatly constant and, with accuracy of the order of 10⁻³, is equal to the radiation power of the Rayleigh wave at the vacuum-solid interface. It is shown that the acoustic-wave power which can be transmitted to the upper layers of the atmosphere during an earthquake does not exceed 0.01% of the total power radiated at a given frequency. __________ Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 49, No. 7, pp. 577–592, July 2006.     

Two-dimensional array of room-temperature nanophotonic logic gates using InAs quantum dots in mesa structures

We present a detailed study of the dynamics of light in passive nonlinear resonators with shallow and deep intracavity periodic modulation of the refractive index in both longitudinal and transverse directions of the resonator. We investigate solutions localized in the transverse direction (so-called Bloch cavity solitons) by means of envelope equations for underlying linear Bloch modes and solving Maxwell’s equations directly. Using a round-trip model for forward and backward propagating waves we review different types of Bloch cavity solitons supported by both focusing (at normal diffraction) and defocussing (at anomalous diffraction) nonlinearities in a cavity with a weak-contrast modulation of the refractive index. Moreover, we identify Bloch cavity solitons in a Kerr-nonlinear all-photonic crystal resonator solving Maxwell’s equations directly. In order to analyze the properties of Bloch cavity solitons and to obtain analytical access we develop a modified mean-field model and prove its validity. In particular, we demonstrate a substantial narrowing of Bloch cavity solitons near the zero-diffraction regime. Adjusting the quality factor and resonance frequencies of the resonator optimal Bloch cavity solitons in terms of width and pump energy are identified.     

A slow wave with the structure of an electromagnetic wave in piezoelectric and magnetostrictive media

The propagation of elastic waves in piezoelectric and magnetostrictive materials is considered theoretically. It is shown that an elastic wave in a piezoelectric can create not only a longitudinal electric field parallel to the wave normal (longitudinal piezoactivity) but also a transverse field of electric induction (transverse piezoactivity). The presence of a transverse induction field leads to the appearance of a magnetic field perpendicular to the direction of the wave normal and to the induction vector; therefore, the transverse-piezoactive wave is accompanied by a transverse wave having the structure of an electromagnetic wave and propagating with the speed of sound. Transverse-magnetostrictive elastic waves in magnetostrictive dielectrics are accompanied by a similar wave.Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 10, pp. 32–36, October, 1976.     

Green's functions for a volume source in an elastic half-space

Green's functions are derived for elastic waves generated by a volume source in a homogeneous isotropic half-space. The context is sources at shallow burial depths, for which surface (Rayleigh) and bulk waves, both longitudinal and transverse, can be generated with comparable magnitudes. Two approaches are followed. First, the Green's function is expanded with respect to eigenmodes that correspond to Rayleigh waves. While bulk waves are thus ignored, this approximation is valid on the surface far from the source, where the Rayleigh wave modes dominate. The second approach employs an angular spectrum that accounts for the bulk waves and yields a solution that may be separated into two terms. One is associated with bulk waves, the other with Rayleigh waves. The latter is proved to be identical to the Green's function obtained following the first approach. The Green's function obtained via angular spectrum decomposition is analyzed numerically in the time domain for different burial depths and distances to the receiver, and for parameters relevant to seismo-acoustic detection of land mines and other buried objects.     

Evaluation of the vibrational modes of the human skull as it relates to bone-conducted sound

Analytic and numerical models are used to study bone-conducted sound and how it relates to the vibrational modes of the human skull. The analytic model is based on the solution to the acoustic and elastic wave equations and the constraining boundary conditions for a fluid-filled elastic sphere. Both models predict that most of the acoustic energy of bone-conducted sound exists in the form of surface wave vibrations at the interface between two acoustic media rather than in the bone or cranial chamber. These surface waves have phase speeds much slower than the bulk sound speed for bone. The analytic model, based on spherical elastic shells, predicts a phase speed of 775 m/s and the first resonance frequency at 1500 Hz while the numerical solution yields approximate phase speeds of 450 m/s and provides a visual display of the surface waves and diffraction effects.     

Effect of acoustical damping with a porous absorptive layer in the cavity to reduce the structure-borne sound radiation from a double-leaf structure

Structure-borne sound radiation from a double-leaf structure with a porous absorptive layer in the cavity is studied theoretically as well as experimentally. The study is for establishing a countermeasure to reduce the structure-borne noise radiated from an interior leaf into rooms and for clarifying its reduction effect. The sound field radiated from a double-leaf elastic plate with layers of arbitrary media in the cavity set into vibration by a point force excitation is theoretically analyzed. The effect of the bulk vibration of an absorptive layer is also considered by a simple model into the present theory. Radiation reduction of an inner-layer derived from the theory is experimentally validated. Parametric studies reveal that increasing the ratio of an absorptive layer thickness to the cavity depth is effective to reduce the structure-borne sound radiation but high flow resistivity of the absorbent material is not necessarily required. A practical equation to predict the mass-air-mass resonance frequency for absorbent cavity case is given in a simple form.     

An analytical model for a dodecahedron loudspeaker applied to the design of omni-directional loudspeaker arrays

The dodecahedron (12 sided) loudspeaker is used extensively for acoustic measurements as an approximation to an omni-directional sound source, for example in building acoustics and automotive applications. In many instances its use is favoured above other omni-directional source approximations e.g. open pipe because of its greater power. However, analysis by other authors has shown that the radiation deviates from omni-directional above a certain frequency. In this paper an analytical model of the sound pressure field generated by a dodecahedron loudspeaker is constructed. The sound pressure field generated by the model is then compared with measured data and good agreement is demonstrated. Having established and validated the model, it is adapted to form alternative spherical loudspeaker arrays based on Platonic and Archimedean solid geometry and also a number of spherical packing routines. The aim of the analysis is to determine the optimal geometry for an omni-directional source using pistonic loudspeakers.The analysis shows that constructive interference of the pressure field across the spherical baffle surface and not individual loudspeaker pistonic radiation characteristics is the most significant factor with respect to deviations from omni-directional radiation for a complete spherical array. Consequently, loudspeaker elements which physically occupy the spherical baffle surface to their maximum extent provide the most extended frequency range of omni-directional operation. The most optimal spherical array distribution is shown to be the dodecahedron.     

压力下Nd60Al10Fe20Co10块体金属玻璃的弹性行为

室温下在等静压最高达～0.5GPa的条件下，利用超声回波技术测量了超声波横波和纵波在Nd₆₀Al₁₀Fe₂₀Co₁₀块体金属玻璃中的传播时间来确定横波和纵波速度.测量时所采用的超声波频率为10MHz.利用所测量的数据，建立了超声波波速、样品的密度、弹性模量以及Debye温度等与所施加的压力之间的相互关系.并且推导出Murnaghan状态方程.另外，基于非晶态与晶态物理性能的相似性，对此块体非晶的压缩曲线、弹性常数和Debye温度等进行了理论计算，结果表明Nd₆₀Al₁₀Fe₂₀Co₁₀块体金属玻璃的弹性性能与其组成的元素有着密切的关系. 关键词： 块体金属玻璃 弹性性能 等静压