Effect of the Electrode Potential on the Oxygen Reaction Rate in the Electrode System O2, Au/La0.88Sr0.12Ga0.82Mg0.18O2.85

The polarization dependences of a porous gold electrode in contact with a solid electrolyte of the composition La_0.88Sr_0.12Ga_0.82Mg_0.18O_2.85 are studied at 600–800°C and oxygen pressures of 2 × 10⁻²-1 atm. It is shown that the rate of cathodic reduction of oxygen out of the gas phase depends on the preliminary treatment of the sample. The activation energy is equal to 110–135 kJ mol⁻¹ at a low polarization. After increasing the polarization, the activation energy for the cathodic reduction of oxygen equals 75–85 kJ mol⁻¹ and depends on the oxygen pressure as a power function with a power index of 1/4. The rate of the anodic evolution of oxygen is dependent neither on the preliminary treatment of the sample nor on the oxygen pressure in the gas phase and the polarization curve has a characteristic segment, which corresponds to a limiting overvoltage.__________Translated from Elektrokhimiya, Vol. 41, No. 8, 2005, pp. 954–962.Original Russian Text Copyright © 2005 by Shkerin, Sokolova, Beresnev.     

Thermodynamics of Binary and Ternary Copper-, Cadmium,and Indium-Containing Semiconducting Phases: An Electrochemical Study

Optimum compositions of ion-selective membranes in quasi-binary systems CuCl-CdCl₂, LiCl-CdCl₂, and In₂S₃-InCl₃ are selected by a method of coulometric titration in cells with solid electrolytes. Transport numbers for ions are close to unity for the optimum compositions; transport numbers for electrons are vanishingly small ( ≺10⁻³ to 10⁻⁴); the electroconductivity is equal to ≈ 10⁻³ S cm⁻¹ at 200°C; the diffusion coefficients for the current-producing component are on the order of 10⁻⁶ to 10⁻⁷ cm² s⁻¹. When using a solid electrolyte of the composition CuCl-CdCl₂, which contains 30 mol % CdCl₂, methods of emf and electroconduction reveal that the region of homogeneity of copper(I) selenide falls in the region of compositions Cu_1.33Se-Cu_2.67Se.__________Translated from Elektrokhimiya, Vol. 41, No. 6, 2005, pp. 721–727.Original Russian Text Copyright © 2005 by Leushina, Kolesnikova, Makhanova, Zlomanov.Published on the basis of a report delivered at the VII Meeting on Fundamental Problems in Solid-State Ionics (Chernogolovka-2004).     

Thermodynamic Parameters of Interconversions of Isopolyanions in Solutions of Tungsten(VI)

Interactions in the WO ₂ ²⁻ -H⁺-H₂O system was studied by pH-potentiometric titration at 25 ± 0.1°C for c _w ⁰ = 8 × 10⁻³ to 2 × 10⁻² mol/l. An accurate mathematical model for polycondensation of tungsten(VI) anions in aqueous solution was proposed. The concentration constants of formation were calculated and the diagrams of distribution of isopolyanions of tungsten(VI) were plotted for pH from 1 to 8 with nitrate ions as a supporting electrolyte at different ionic strengths of the solution (I = 0.10 to 0.50). The dependences of the concentration equilibrium constants in solutions on the ionic strength were approximated by Pitzer’s method. The thermodynamic constants of formation and standard Gibbs energies of formation of isopolytungstates from WO ₄ ²⁻ were calculated. The most probable scheme of interconversions of isopolyanions in solution at different pH values was proposed.__________Translated from Koordinatsionnaya Khimiya, Vol. 31, No. 8, 2005, pp. 583–589.Original Russian Text Copyright © 2005 by Rozantsev, Sazonova.     

Polymerization of 3-Methoxythiophene in a Direct-Current Discharge

Thin polymer films were obtained from 3-methoxythiophene at the cathode in a dc discharge. It was found using Fourier transform IR spectroscopy that thiophene rings were the main structural units of the polymer; aliphatic fragments and oxygen-containing groups were also present. The polymer based on 3-methoxythiophene was found to exhibit p-type intrinsic conduction with an activation energy of 0.045 eV. The conductivity of the polymer at 20°C was 10⁻⁸ Ω⁻¹ cm⁻¹, and doping with iodine resulted in a rise in conductivity to 10⁻³ Ω⁻¹ cm⁻¹.__________Translated from Khimiya Vysokikh Energii, Vol. 39, No. 5, 2005, pp. 382–385.Original Russian Text Copyright © 2005 by Drachev, Gil’man, Krasovskii, Costa-Belobrzeckaja.     

Conduction and Ion Transport in LaYO<Subscript>3</Subscript> Doped with CaO

Values of partial conductions (ionic: protonic, oxygen, hole) and their activation energies in LaYO₃ are determined at 700–1050°C, pO₂ ranging from air to 10⁻¹⁵ Pa, and pH₂O = 0.04–13.5 kPa for different versions of doping with calcium (when introduced into the lanthanum or yttrium sublattices, or into both sublattices simultaneously). The conductivity increases in the series La_0.97Ca_0.03YO_{3 − α} < LaY_0.97Ca_0.03O_{3 − α} < La_0.985Y_0.985Ca_0.03O_{3 − α}, which means that the stoichiometric composition with a 1 : 1 ratio between Y and La has the highest conductivity.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 610–615.Original Russian Text Copyright © 2005 by Balakireva, Stroeva, Gorelov.     

Ionization constants of benzoic acid from 25 to 250°C and to 2000 bar

The ionization constant of benzoic acid has been determined by conductivity measurements of dilute aqueous solutions and found to vary from 6.27×10^–5 at 25°C to 0.39×10^–5 at 250°C. The pressure effect to 2000 bar has been measured, and the ratio of ionization constants K₂₀₀₀/K₁ is 2.26 at 25°C and 7.3 at 250°C. V°₁, the standard partial molar volume change for the ionization at 1 bar, varies from –11.7 cm³-mol^–1 at 25°C to –60 cm³-mol^–1 at 250°C. The volume changes are smaller at higher pressures.     

Structure of Ba Na Ethylenediaminetetraacetatocobaltate(III) Perchlorate, Na[Ba6(H2O)25][Co(Edta)]4(ClO4)9 · 5H2O

Crystals with uncommon composition NaBa₆[Co(Edta)]₄(ClO₄)₉ · 30H₂O (Edta⁴⁻ is ethylenediaminetetraacetic acid anion) were obtained with the following unit cell parameters: a = 14.8513(9) Å, b = 26.2361(15) Å, c = 15.1789(9) Å, α = 91.661(7)°, β = 113.035(7)°, γ = 89.897(7)°, space group P1¯. Each complex anion [Co(Edta)]⁻ is bonded through the carboxyl O atoms to five Ba atoms to give three-dimensional framework in a crystal. One perchlorate ion forms Ba-O-Cl-O-Ba bridge between the Ba atoms; four ClO ₄ ⁻ ions are isolated, while the remaining four ions act as monodentate ligands at the Ba atoms. The water molecules (25 in sum) complete the coordination sphere of the Ba atoms to eight-, nine-, or ten-vertex polyhedron. Four water molecules are in the closest surrounding of the Na atom, one H₂O molecule is isolated.__________Translated from Koordinatsionnaya Khimiya, Vol. 31, No. 8, 2005, pp. 590–595.Original Russian Text Copyright © 2005 by Zabel, Poznyak, Pawlowski.     

Mechanism of the Formation of O2? Radical Anions on CeO2 and (0.5–10)%CeO2/ZrO2 during the Adsorption of an NO-O2 Mixture

It is established by ESR that the adsorption of an NO + O₂ mixture at 20°C on oxidized CeO₂ (O₂, T = 400–700°C) produces radical anions O ₂ ⁻ located both on isolated Ce⁴⁺ cations (O ₂ ⁻ (1)) and in associated anionic vacancies (O ₂ ⁻ (2)). These species differ in thermal stability. For example, O ₂ ⁻ (2) decomposes at 20°C, while O ₂ ⁻ (1) decomposes at 50°C. Only O ₂ ⁻ (1) species are observed at −196°C in ZrO₂-supported CeO₂. In the case of NO + O₂ adsorption at 20°C, O ₂ ⁻ is stabilized on Zr⁴⁺ cations and decomposes at 270°C. Increasing the cerium oxide content of the ZrO₂ surface from 0.5 to 10% only partially inhibits the formation of O ₂ ⁻ -Zr⁴⁺. The Zr⁴⁺ cation is shown to possess a higher Lewis acidity than the Ce⁴⁺ cation, and the ionic bond in O ₂ ⁻ -Zr⁴⁺ complexes is stronger than that in O ₂ ⁻ -Ce⁴⁺ complexes. ESR, temperature-programmed desorption, and IR spectroscopic data for various adsorption complexes of NO on CeO₂ suggest that, in the key step of O ₂ ⁻ formation, free electrons appear on the surface owing to the conversion of adsorbed NO molecules into nitrito chelates on coordinately unsaturated ion pairs Ce⁴⁺-O ₂ ⁻ .__________Translated from Kinetika i Kataliz, Vol. 46, No. 3, 2005, pp. 414–422.Original Russian Text Copyright © 2005 by Il’ichev, Shibanova, Ukharskii, Kuli-zade, Korchak.     

Kinetics of Formation of Peroxyacetic Acid

The kinetics of the reaction of acetic acid with hydrogen peroxide, leading to peroxyacetic acid, were studied at various molar reactant ratios (AcOH-H₂O₂ from 6 : 1 to 1 : 6) at 20, 40, and 60°C and sulfuric acid (catalyst) concentrations of 0 to 9 wt %. The reaction is reversible, and the equilibrium constant decreases as the temperature rises: K = 2.10 (20°C), 1.46 (40°C), 1.07 (60°C); Δ_r H ⁰ = − 13.7±0.1 kJ mol⁻¹, Δ_r S = −40.5±0.4 J mol⁻¹ K⁻¹. The maximal equilibrium concentration of peroxyacetic acid (2.3 M) is attained at 20°C and a molar AcOH-to-H₂O₂ ratio of 2.5 : 1. The rate constants of both forward and reverse reactions increase with increase in sulfuric acid concentration from 0 to 5 wt %. Further raising the catalyst concentration does not affect the reaction rate. The reaction mechanism is discussed.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 7, 2005, pp. 1187–1193.Original Russian Text Copyright © 2005 by Dul’neva, Moskvin.     

Synthesis and Investigation of Indium Dodecatungstosilicate

Indium dodecatungstosilicate of the composition [In(OH)⋅5H₂O]₂ [SiW₁₂O₄₀]⋅H₂O is synthesized and studied by means of IR spectroscopy, thermogravimetry, and X-ray phase analysis. The crystals of this compound are triclinic, space group P1, a 13.079(3), b 13.795(3), c 13.967(3) Å, α 90.08(3)°, β 103.76(3)°, ψ107.76(3)°, Z 2, and π_calc 4.900 g cm⁻³.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 1, 2005, pp. 21–23.Original Russian Text Copyright © 2005 by Kaziev, Dutov, Quinones, Ita, Sychkin.     

Effect of Copper on Solid Electrolytes (Ce0.8Sm0.2)1 ? xCuxO2 ? δ and Composite Cathodes Based on La0.8Sr0.2MnO3

The phase composition and electroconduction in air of solid electrolytes (Ce_0.8Sm_0.2)_{1 − x} Cu_xO_{2 − δ} (CSCu), where x = 0, 2, 5, 10, and 20 mol % and which are synthesized using the ceramic technology, are studied. Adding an additive of CuO lowers the CSCu sintering temperature by 100– 200°C and leads to the formation of single-phase solid solutions of a fluorite type up to x = 10 mol %. The electroconductivity of the CSCu electrolytes remains practically invariant upon adding up to 5 mol % Cu and equals 0.089–0.095 and 0.017–0.021 S cm⁻¹ at 800 and 600°C. The sintering, adhesion, and electroconductance of composite cathodes based on La_0.8Sr_0.2MnO₃ with 40% CSCu and their electrochemical behavior in air in the temperature interval 900–1000°C on carrying electrolyte Zr^0.9Y_0.1O_1.95 with a CSCu sublayer containing 2 mol % Cu are studied.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 656–661.Original Russian Text Copyright © 2005 by Bogdanovich, Gorelov, Balakireva, Dem’yanenko.     

Conductance of tris(hydroxymethyl)-aminomethane hydrochloride (Tris·HCl) in water at 25 and 37°C

The conductances of aqueous solutions of tris(hydroxymethyl)aminomethane hydrochloride (Tris·HCl) at 25°C and 37°C have been measured. The concentration of salt varied from 4×10^–4 to 1.6×10^–2 mole-dm^–3. The data were analyzed by the full Pitts equation which yielded the following parameters: at 25°C, ° = 106.07 S-cm²-mole^–1, K_A=1.01; at 37°C, ° = 106.07 S-cm²-mole^–1, K_A=0.99. These values suggest that Tris·HCl is essentially completely dissociated in water. The mobility of the Tris·H⁺ ion was found to be considerably smaller than that of the alkali metal cations. This result is consistent with abnormal liquid-junction potentials for Tris buffer solutions at 25 and 37°C.     

The first ionization constant from 25 to 200°C and 2000 bar for orthophosphoric acid

The ionization constant of orthophosphoric acid, determined by conductivity measurements, decreased from 7.11×10^–3 at 25°C to 6.2×10^–4 mol-kg^–1 at 200°C. The pressure effect to 2000 bar was also measured and the ratio K₂₀₀₀/K₁ is 2.7 at 25°C and 3.7 at 200°C. The standard partial molar volume change for the ionization at 1 bar, , changes from –16.1 at 25°C to –33.3 cm³-mol^–1 at 200°C. The partial molar compressibility change for the ionization, , varies from –3.8×10^–3 to –8.3×10^–3 cm³-mol^–1 bar^–1 over the same temperature range.     

Reactions of sulfur(IV) with an octahedral manganese(IV) complex of 1,8-bis(2-hydroxy benzamido)-3,6-diaza octane: the role of phenolate–amide–amine coordination

The Mn^IV complex of tetra-deprotonated 1,8-bis(2-hydroxybenzamide)-3,6-diazaoctane (Mn^IVL) engrossed in phenolate-amido-amine coordination is reduced by HSO₃⁻ and SO₃²⁻ in the pH range 3.15–7.3 displaying biphasic kinetics, the Mn^IIIL⁻ being the reactive intermediate. The Mn^IIIL⁻ species has been characterized by u.v.–vis. spectra {λ _max, (ε, dm³ mol⁻¹ cm⁻¹): 285(15 570), 330 sh (7570), 469(6472), 520 sh (5665), pH=5.42}. SO₄²⁻ was the major oxidation product of S^IV; dithionate is also formed (18 ± 2% of [Mn^IV]_T) which suggests that dimerisation of SO₃^−• is competitive with its fast oxidation by Mn^IV/III. The rates and activation parameters for Mn^IVL + HSO₃⁻ (SO₃²⁻) → Mn^IIIL⁻; Mn^IIIL⁻ + HSO₃⁻ (SO₃²⁻) → Mn^IIL²⁻ are reported at 28.5–45.0 °C (I=0.3 mol dm⁻³, 10% (v/v) MeOH + H₂O). Reduction by SO₃²⁻ is ca. eight times faster than by HSO₃⁻ both for Mn^IVL and Mn^IIIL⁻. There was no evidence of HSO₃⁻/SO₃²⁻ coordination to the Mn centre indicating an outer sphere (ET) mechanism which is further supported by an isokinetic relationship. The self exchange rate constant (k₂₂) for the redox couple, Mn^IIIL⁻/Mn^IVL (1.5 × 10⁶ dm³ mol⁻¹ s⁻¹ at 25 °C) is reported.     

Insect pheromones and their analogues. XVI. Practical synthesis of hexadec-9Z-enal — A component of the sex pheromone of the cotton bollwormHeliothis armigera

A synthesis of hexadec-9Z-enal — a component of the sex pheromone of the cotton boll-wormHeliothis armigera (Hübner) — based on cyclooctene (I) is proposed. Through a solution of 22 g of (I), 250 ml of cyclohexane, and 40 ml of MeOH is passed (at 5°C) 0.2 M O₃/O₂, the solution is decanted off, and the precipitated ozonide is dissolved in 200 ml of MeOH and is reduced with 19 g of NaBH₄ (40°C) with the isolation, after the usual working up, of 23.4 g of octane-1,8-diol (II). From 0.5 mole of (II) and 0.6 mole of 45% HBr 8-bromooctan-1-ol (III) is obtained and this is converted into 1-(2-THPL)oxy)-8-bromooctane (IV). The condensation of (IV) with oct-1-yne (Ar, LiNH₂, HMPTA, 10°C, 1 h, and then 55°C, 10 h) leads to 1-(2-THPL-oxy)hexadec-9-yne (V) the hydrolysis of which (MeOH, H₂O, p-TsOH, 20°C for 20 h) yields hexadec-9-yn-ol (VI). The reduction of (VI) (Et₂O, iso-BuMgBr, Cp₂TiCl₂, 0°C, 15 min, then 20°C, 1 h) yieldshexadec-9Z-en-l-ol (VII). The oxidation of (VII) (PyHCrO ₃ ⁺ Cl^–, CH₂Cl₂, 20°C, 2 h) gives hexadex-9Z-enal (VIII). Characteristics of the compounds (yield (%), n _D ^{20 (25)}: (II) – 80, mp 61–62°C; (III) – 75, 1.4807; (IV) – 99, —; (V) – 52, 1,4650; (VI) – 85, 1.4657; (VII) – 99, 1.4650; (VIII) – 98, 1.4600. Characteristics of the IR and PMR spectra of compounds (V–VII) are given.Institute of Chemistry, Bashkir Branch, Academy of Sciences of the USSR, Ufa. Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 286–289, March–April, 1987.     

Solubility of methane in aqueous solutions of triethylenediamine

The solubilities of methane were measured in water and aqueous solutions of triethylenediamine (TED), triethylenediamine hydrochloride (TED·HCl), and HCl at several concentrations up to 1M at 5° intervals from 5 to 25°C. Methane solubilities in solutions of TED·HCl and HCl are lower than those in water and decrease with increasing cosolute concentration. In contrast, the solubilities in TED solutions are greater than those in water and increase with increasing TED concentration. The order of methane solubilities at 25°C in water and in 0.5M aqueous solutions is TED>H₂O>HCl>TED·HCl with Ostwald coefficients of 3.57×10^–2, 3.44×10^–2, 3.26×10^–2, and 3.19×10^–2, respectively, and with an experimental precision of about ±0.2×10^–3. Thermodynamic functions for the transfer of methane from water to 0.25, 0.50, and 0.75M aqueous solutions have been calculated on the molar concentration scale. The free energies of transfer are compared with previous results for methane in aqueous solutions of tetraalkylammonium halides.     

Ion Transfer in CdF<Subscript>2</Subscript>-based Iso- and Polyvalent Solid Solutions

The ionic conductivity of solid solution Cd_0.77Sr_0.23F₂ is 1.6 × 10⁻⁴ S/cm at 500 K. The conduction mechanism changes from a vacancy mechanism to an interstitial one at 523–553 K. In solid solutions Cd_0.9R_0.1F_2.1 (R = La-Lu, Y), the activation enthalpy of conduction decreases from 0.9 to 0.8 eV with decreasing ionic radius of R³⁺, raising the 500-K conductivity from 6 ×10⁻⁶ S/cm for La³⁺to 6 × 10⁻⁵ S/cm for Lu³⁺. For crystalline Cd_0.95In_0.05F_2.05, ionic and electronic conductivities at 313 K equal 5 × 10⁻⁴ and 5 − 10⁻⁶ S/cm.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 627–632.Original Russian Text Copyright © 2005 by Sorokin, Buchinskaya, Sul’yanova, Sobolev.     

Regularities of the trans-Influence of Ligand L on the Energy Characteristics of the Metastable Isomers of trans-[RuX4(NO)L]q (L = H2O, NH3, Pyrazine, Cl?, OH?, CN?, NO2?; X = Cl?, NH3)

The geometric structures of the ground state and metastable isomers of the nitroso complexes trans-[RuCl₄(NO)L]^q (L = H₂O, NH₃, pyrazine (Pz), q = −1; Cl⁻, OH⁻, CN⁻, NO ₂ ⁻ , q = −2) and cis[RuCl₄(NO)L]^q (L = Pz, q = −1) were optimized in terms of the density functional theory. The variation of the trans-ligand L influences the relative energy of the metastable isomer with a side NO coordination. The presence of π-acceptor substituents in the trans-ligand L decreases the energy.__________Translated from Koordinatsionnaya Khimiya, Vol. 31, No. 8, 2005, pp. 606–611.Original Russian Text Copyright © 2005 by Lyubimova, Sizova.     

Preparation,characterization and a kinetic study oftrans-[Ru(NH3)4L(H2O)](PF6)2 [L=PPh3, AsPh3, or SbPh3]

Summary The complexestrans-[Ru(NH₃)₄(H₂O)PPh₃](PF₆)₂ and [Ru(NH₃)₅L](PF₆)₂, (L=AsPh₃ or SbPh₃) have been isolated and characterized by microanalysis, cyclic voltammetry and ultraviolet-visible spectroscopy. The specific rate constants for the aquation of [Ru(NH₃)₅L]²⁺ totrans-[Ru(NH₃)₄L(H₂O)]²⁺ are (2.5±0.1)×10^–5s^–1 and (1.8±0.1)×10^–5s^–1 for L=AsPh₃ and SbPh₃, respectively, at 25.0±0.1°C; =0.10 mol dm^–3, NaO₂CCF₃. Under the same conditions, the second-order rate constants for the substitution of water intrans-[Ru(NH₃)₄(H₂O)L]²⁺ by isonicotinamide (isn) are 1.2±0.1, (6.3±0.3)×10^–2 and (3.8±0.2)×10^–2 m ^–1s^–1 for L=PPh₃, AsPh₃, and SbPh₃, respectively, suggesting that the order of decreasingtrans-effect is: PPh₃AsPh₃>SbPh₃. The formation constants for thetrans-[Ru(NH₃)₄L(isn)]²⁺ complexes are 75±3, (1.40±0.01)×10³ and (1.80±0.02)×10³M^–1 for L=PPh₃, AsPh₃, and SbPh₃, respectively, suggesting that the order of increasingtrans-influence is: SbPh₃3PPh₃.     

Superionic Conduction in Complex Fluorides of Antimony(III) MnSbxFy (M—Cations of an Alkali Metal, Ammonium, or Thallium, n = 1–3, and x = 1–4)

Methods of ¹⁹F NMR and impedance spectroscopy are used to investigate the internal mobility of fluoride (ammonium) ions and electrophysical characteristics of complex trivalent antimony fluorides MSb₄F₁₃, MSb₃F₁₀, MSb₂F₇, M₂Sb₃F₁₁, M₃Sb₄F₁₅, and MSbF₄ (M is an alkali cation, ammonium, thallium). The ion motion types in the cationic and anionic sublattices of the fluorides are determined at 150–500 K. The polymorphous transformations in the fluorides are usually phase transitions to a superionic state and their high ionic (superionic) conductivity (σ ≥ 10⁻⁴ to 10⁻² S cm⁻¹ at 400 K) is due to the diffusion motion of ions of fluoride, ammonium, and possibly sodium, potassium, and thallium. The high polarizability of thallium ions favors the development of high mobility of fluoride ions in the fluorides.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 560–572.Original Russian Text Copyright © 2005 by Kavun, Uvarov, Slobodyuk, Brovkina, Zemnukhova, Sergienko.