Structure and interactions of block copolymer micelles of Brij 700 studied by combining small-angle X-ray and neutron scattering

Spherical micelles of the diblock copolymer/surfactant Brij 700 (C(18)EO(100)) in water (D(2)O) solution have been investigated by small-angle X-ray scattering (SAXS) and small-angle neutron scattering (SANS). SAXS and SANS experiments are combined to obtain complementary information from the two different contrast conditions of the two techniques. Solutions in a concentration range from 0.25 to 10 wt % and at temperatures from 10 to 80 degrees C have been investigated. The data have been analyzed on absolute scale using a model based on Monte Carlo simulations, where the micelles have a spherical homogeneous core with a graded interface surrounded by a corona of self-avoiding, semiflexible interacting chains. SANS and SAXS data were fitted simultaneously, which allows one to obtain extensive quantitative information on the structure and profile of the core and corona, the chain interactions, and the concentration effects. The model describes the scattering data very well, when part of the EO chains are taken as a "background"contribution belonging to the solvent. The effect of this becomes non-negligible at polymer concentrations as low as 2 wt %, where overlap of the micellar coronas sets in. The results from the analysis on the micellar structure, interchain interactions, and structure factor effects are all consistent with a decrease in solvent quality of water for the PEO block as the theta temperature of PEO is approached.     

Structural analysis of polyelectrolyte film absorbing metal ion by SAXS utilizing with X-ray anomalous dispersion effect

A distribution of Cu ions in polyelectrolyte film (Nafion) is directly observed with a small-angle X-ray scattering (SAXS) method utilizing an X-ray anomalous dispersion effect. A partial structure factor of the Cu ions, GAA(q), can be derived from the SAXS profiles obtained by scanning the incident X-ray energy around the Cu K absorption edge. GAA(q) has two peaks, indicating that the Cu ions hierarchically distribute in Nafion film. In addition, a standard SAXS also shows that Nafion film has a hierarchical structure. These results mean that the Cu ions locate in the domain where the hydrophilic bases aggregate.     

A small-angle X-ray scattering study of the structure of lysozyme-sodium dodecyl sulfate complexes

The structure of lysozyme-sodium dodecyl sulfate (SDS) complexes in solution is studied using small-angle X-ray scattering (SAXS). The SAXS data cannot be explained by the necklace and bead model for unfolded polypeptide chain interspersed with surfactant micelles. For the protein and surfactant concentrations used in the study, there is only marginal growth of SDS micelles as they complex with the protein. Being a small and rather rigid protein, lysozyme can penetrate the micellar core which is occupied by flexible and disordered paraffin chains and also the shell occupied by the hydrated head groups. A partially embedded swollen micellar model seems appropriate and describes well the scattering data. The SAXS intensity profiles are analyzed by considering the change in the electron scattering length density of the micellar core and shell due to complexation with protein and treating the intermicellar interaction using rescaled mean spherical approximation (RMSA) for charged spheres.     

Agglomeration of proteins in acoustically levitated droplets

An ultrasonic trap (acoustic levitator) was used as an analytical tool to allow container-free handling of proteins in small sample volumes. This trap was combined for the first time with synchrotron small-angle X-ray scattering (SAXS) for structure analysis of biological macromolecules in a solution. The microfocus beamline at BESSY was used as a source of intense X-ray radiation. Apoferritin (APO) was used as a model protein, and its aggregation behavior in a levitator was followed from a diluted solution to the solid state. Different stages of APO agglomeration were observed without solid container walls, which may influence aggregation behavior and produce a parasitic scattering background. Starting with a volume of 5 microL we analyzed the concentration dependence of APO structure factors in the range from 5 to 1,200 mg/mL (solid protein). The solution was stirred automatically due to convection inside the droplet caused by the ultrasonic field. SAXS data recording of APO was performed in time intervals of 60 s during an aggregation experiment of 30 to 60 min.     

Structure characterization of cellulose nanofiber hydrogel as functions of concentration and ionic strength

Carboxylated cellulose nanofibers (CNFs), having an average width of 7 nm and thickness of 1.5 nm, were produced by TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-mediated oxidation method. The fiber cross-sectional dimensions were determined using small-angle X-ray scattering (SAXS), transmission electron microscopy and atomic force microscopy techniques, where the rheological properties under different concentration and ionic strength were also investigated. The formation of hydrogel was evidenced by increasing the CNF concentration or ionic strength of the solvent (water), while the gel structure in ion-induced CNF hydrogels was found to be relatively inhomogeneous. The gelation behavior was closely related to the segmental aggregation of charged CNF, which could be quantitatively characterized by the correlation length (ξ) from the low-angle scattering profile and the scattering invariant (Q) in SAXS.     

SAXS and SANS studies of polymer colloids

The analysis of latex particles by small-angle scattering (small-angle X-ray scattering, SAXS; small-angle neutron scattering, SANS) is reviewed. Small-angle scattering techniques give information on the radial structure of the particles as well as on their spatial correlation. Recent progress in instrumentation allows to extend SANS and SAXS to the q-range of light scattering. Moreover, contrast variation employed in SANS and SAXS studies may lead to an unambiguous determination of the radial scattering length density of the particles in situ, i.e. in suspension. Hence, these techniques are highly valuable for a comprehensive analysis of polymer colloids as shown by the examples discussed herein.     

The role of calcium in membrane condensation and spontaneous curvature variations in model lipidic systems

In this study, the dynamical behaviour of calcium-induced disordered to well-ordered structural transitions has been investigated by time-resolved synchrotron small-angle X-ray scattering (SAXS) in the milliseconds to seconds range. The in situ monitoring of the formed non-equilibrium self-assembled structures was achieved by the successful combination of synchrotron SAXS with stopped flow measurements. The effect of the rapid mixing of aqueous dispersions of dioleoylphosphatidyalglycerol (DOPG)/monoolein (MO) with low concentrations of Ca(2+) ions is reported. Under static conditions and in the absence of Ca(2+) ions, the evaluation of SAXS data for DOPG/MO aqueous dispersions prepared with three different DOPG/MO molar ratios indicates the formation of either a sponge-like L(3) phase or uncorrelated bilayers. Clearly, the lipid composition plays a vital role in modulating the structural behaviour of these aqueous dispersions in the absence and also in the presence of Ca(2+) ions. The rapid-mixing experiments revealed that the fast and strong interactions of Ca(2+) ions with the negatively charged DOPG/MO membranes triggers the transformation from the L(3) phase or the uncorrelated bilayers to the well-ordered dehydrated L(α) phase or to inverted type bicontinuous cubic phases, V(2), with either a symmetry of Pn3m or Im3m. Additionally, we recently reported (A. Yaghmur, P. Laggner, B. Sartori and M. Rappolt, PLoS ONE, 2008, 3, e2072) that low concentrations of Ca(2+) ions trigger the formation of the inverted type hexagonal (H(2)) phase in DOPG/MO aqueous dispersions with a molar DOPG/MO ratio of 30/70. These are also temperature-sensitive structural transitions. Intriguingly, the strong association of Ca(2+) ions with the negatively charged DOPG/MO membranes leads to fast re-organization of the two lipids and simultaneously induces fast tuning of the curvature.     

A pyrrole-containing surfactant as a tecton for nanocomposite SiO2 films

A surfactant featuring a polymerizable pyrrole head group (dodecyl-dimethyl-(2-pyrrol-1-yl-ethyl)-ammonium bromide, DDPABr) was synthesized. The thermotropic behavior of the surfactant was investigated by differential scanning calorimetry (DSC) and X-ray scattering techniques, with small-angle X-ray scattering (SAXS) analysis revealing a highly ordered lamellar bilayer structure. After full characterization, DDPABr was used in the preparation of mesostructured SiO2 nanocomposite thin films via evaporation-induced self-assembly (EISA). Resulting thin SiO2-DDPABr films were studied by 1D and 2D small-angle X-ray scattering (SAXS) techniques, indicating a lamellar nanocomposite structure. Suitable theoretical SAXS models were applied to fit the experimental 1D SAXS data. The surfactant could be chemically polymerized within the lamellar domains.     

Synthesis and bulk physical properties of styrene-alkoxide ionomers. Part I: Sodium salts of polystyrene-co-4-hydroxystyrene

Polystyrene-co-4-hydroxystyrene ionomers (3.0–22 mol%) were synthesized via neutralization of demethylated polystyrene-co-4-methoxystyrene. The physical properties of the ionomers as well as their nonionic precursors were studied by calorimetry, torsion pendulum and small-angle X-ray scattering (SAXS). Evidence for ion aggregation was obtained for the styrene-4-hydroxystyrene ionomers from SAXS and torsion pendulum studies.     

Gelation of xyloglucan ID water/alcohol systems

Xyloglucan has a cellulose backbone with branched (16)--xylose or (12)--galactoxylose as a side chain. Its aqueous solution yields a gel by adding alcohol. The gel structure of xyloglucan ID various kinds of mono- or polyhydric alcohol/water systems was studied by small-angle X-ray scattering (SAXS). The gelation behavior ID strongly dependent on the type of alcohol. The SAXS from gel with monohydric alcohols indicated that the xyloglucan chains caused random aggregation, as expressed with a Debye–Bueche type scattering function. The type of alcohol added was correlated with the size of the inhomogeneity, as evaluated by SAXS results. The gelation with polyhydric alcohols resulted ID less association, which occurred as side-by-side association with a few xyloglucan chains, rather than as random aggregation.     

A novel application of small-angle scattering techniques: Quality assurance testing of virus quantification technology

Small-angle scattering (SAS) techniques, like small-angle X-ray scattering (SAXS) and small-angle neutron scattering (SANS), were used to measure and thus to validate the accuracy of a novel technology for virus sizing and concentration determination. These studies demonstrate the utility of SAS techniques for use in quality assurance measurements and as novel technology for the physical characterization of viruses.     

Formation and structure of self-assembled silica nanoparticles in basic solutions of organic and inorganic cations

The phase behavior of silica solutions containing organic and inorganic cations was studied at room temperature using conductivity, pH, and small-angle scattering experiments. A critical aggregation concentration (cac) was observed at approximately 1:1 ratio of SiO(2)/OH(-) for all cation solutions from conductivity and pH studies. From this cac, a phase diagram of the system was developed with three distinct phase regions in pseudoequilibrium: a monomer/oligomer region (I), a monomer/oligomer/nanoparticle region (II), and a gel region (III). Small-angle X-ray and neutron scattering (SAXS and SANS) on solutions of region II formed with tetrapropylammonium hydroxide (TPAOH) revealed that the nanoparticles have a core-shell structure. Structure analysis of the SAXS and SANS data was best fit by a core-shell oblate ellipsoid model. A polydisperse set of core-shell spheres also fit the data well although with lower agreement factors. Similar nanoparticle morphologies were found in solutions of TMAOH, CsOH, and NaOH.     

Thermodynamics and structural aspect of the gelling process in the gellan gum/metal salt aqueous solutions

Gellan gum undergoes gelation by forming domains composed of associated double helices. Here the further random aggregation of associated double helices seems necessary for the formation of the network in the case of Na-gellan with adding NaCl. Gellan gum aqueous solutions were prepared with or without adding various concentrations of NaCl, and their gel-sol transitions were observed by the differential scanning calorimetry (DSC) and the small-angle X-ray scattering (SAXS). The DSC endothermic peaks are attributed to the dissociation of the ordered domains, and the network dissociation in the case of gel samples. The SAXS results are analyzed in terms of the molecular models of associated double helices. This revised version was published online in July 2006 with corrections to the Cover Date.     

Surfactant--polymer aggregates formed by sodium dodecyl sulfate, poly(N-vinyl-2-pyrrolidone), and poly(ethylene glycol)

The interaction of sodium dodecyl sulfate (SDS) in aqueous solution with poly(N-vinyl-2-pyrrolidone) (M(w) = 55,000 g/mol) in the presence of poly(ethylene glycol) (M(w) = 8000 g/mol) is investigated by electrical conductivity, zeta potential measurements, viscosity measurements, fluorescence spectroscopy, and small-angle X-ray scattering (SAXS). The results indicate that SDS-polymer interaction occurs at low surfactant concentration, and its critical aggregation concentration is fairly dependent on polymer composition. The polymer-supported micelles have average aggregation numbers dependent on surfactant concentration, are highly dissociated when compared with aqueous SDS micelles, and have zeta potentials that increase linearly with the fraction of PVP at constant SDS concentration. The analysis of the SAXS measurements indicated that the PVP/PEG/SDS system forms surface-charged aggregates of a cylindrical shape with an anisometry (length to cross-section dimension ratio) of about 3.0.     

Morphology and transport properties of protons and methanol through partially sulfonated block copolymers

The morphological changes with different compositions of casting solvents in the membranes of sulfonated polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SEBS) were investigated with small-angle X-ray scattering (SAXS) and transmission electron microscope (TEM). Using the single solvent of tetrahydrofuran (THF) and the solvent mixtures of methanol/THF with different compositions, the casting polymer solutions were prepared for the membrane fabrication. The proton conductivity and the methanol permeability of membranes were measured, and the effect of morphological changes on the casting solvents was discussed through Flory–Huggins theory. It was found that the sulfonated SEBS membranes were transformed from well ordered lamellar to disordered co-continuous structure and the morphological difference caused abrupt enhancement in the proton conductivity and the methanol permeability as the concentration of methanol in the mixed solvents (MeOH/THF) increased.     

Gold nanoparticles decorated with oligo(ethylene glycol) thiols: protein resistance and colloidal stability

The interactions between proteins and gold colloids functionalized with protein-resistant oligo(ethylene glycol) (OEG) thiol, HS(CH2)11(OCH2CH2)6OMe (EG6OMe), in aqueous solution have been studied by small-angle X-ray scattering (SAXS) and UV-vis spectroscopy. The mean size, 2R, and the size distribution of the decorated gold colloids have been characterized by SAXS. The monolayer-protected gold colloids have no correlations due to the low volume fraction in solution and are stable in a wide range of temperatures (5-70 degrees C), pH (1.3-12.4), and ionic strength (0-1.0 M). In contrast, protein (bovine serum albumin) solutions with concentrations in the range of 60-200 mg/mL (4.6-14.5 vol %) show a pronounced correlation peak in SAXS, which results from the repulsive electrostatic interaction between charged proteins. These protein interactions show significant dependence on ionic strength, as would be expected for an electrostatic interaction (Zhang et al. J. Phys. Chem. B 2007, 111, 251). For a mixture of proteins and gold colloids, the protein-protein interaction changes little upon mixing with OEG-decorated gold colloids. In contrast, the colloid-colloid interaction is found to be strongly dependent on the protein concentration and the size of the colloid itself. Adding protein to a colloidal solution results in an attractive depletion interaction between functionalized gold colloids, and above a critical protein concentration, c*, the colloids form aggregates and flocculate. Adding salt to such mixtures enhances the depletion effect and decreases the critical protein concentration. The aggregation is a reversible process (i.e., diluting the solution leads to dissolution of aggregates). The results also indicate that the charge of the OEG self-assembled monolayer at a curved interface has a rather limited effect on the colloidal stabilization and the repulsive interaction with proteins.     

Time-resolved structural studies in fiber processing

Time-resolved and off-line synchrotron wide-angle and small-angle x-ray scattering (WAXS and SAXS) was used to study the structure formation in poly-p-phenylenebenzobisoxazole (PBO) fibers during various stages of spinning, coagulation, and heating processes. WAXS data could be explained in terms of liquid-crystalline structures of varying degrees of order. A structure model is proposed that is in accordance with the observed SAXS four-point pattern.     

Self-assembly and luminescence of oligo(p-phenylene vinylene) amphiphiles

We have synthesized a series of amphiphilic molecules consisting of oligo(phenylene vinylene) (OPV) asymmetrically end-substituted with a hydrophilic poly(ethylene glycol) (PEG) segment and a hydrophobic alkyl chain. This amphiphilic structure induces self-assembly into both thermotropic and lyotropic lamellar liquid crystalline (LC) phases. The molecules form strongly fluorescent, self-supporting gels in both water and polar organic solvents, even at high concentrations on the order of 30 wt %. These self-assembled structures have been characterized by small-angle X-ray scattering (SAXS), differential scanning calorimetry (DSC), and polarized optical microscopy (POM). Photoluminescence (PL) is influenced by the structure of the material, with enhanced emission in the LC state due to assembly of the chromophore in confined two-dimensional layers. Self-assembly controlling molecular aggregation at the nanoscale could significantly improve the performance of OPV-based materials in optoelectronic devices.     

The structure of metallomicelles

The morphology of micelles formed by two novel metallosurfactants has been studied by small-angle neutron scattering (SANS) and small-angle-X-ray scattering (SAXS). The two surfactants both contain a dodecyl chain as the hydrophobic moiety, but differ in the structure of the head group. The surfactants are Cu(II) complexes of monopendant alcohol derivatives of a) the face-capping macrocycle 1,4,7-triazacyclanonane (tacn), and b) an analogue based upon the tetraazamacrocycle 1,4,7,10-tetraazacyclododecane. Here, neutron scattering has been used to study the overall size and shape of the surfactant micelles, in conjunction with X-ray scattering to locate the metal ions. For the 1,4,7,10-tetraazacyclododecane-based surfactant, oblate micelles are observed, which are smaller to the prolate micelles formed by the 1,4,7-triazacyclononane analogue. The X-ray scattering analysis shows that the metal ions are distributed throughout the polar head-group region, rather than at a well-defined radius; this is in good agreement with the SANS-derived dimensions of the micelle. Indeed, the same model for micelle morphology can be used to fit both the SANS and SAXS data.