稀土金属掺杂对锐钛矿型TiO2光催化活性影响的理论和实验研究

从理论和实验两方面探讨稀土金属掺杂对锐钛矿型TiO2光催化活性的影响.理论上采用基于密度泛函理论(DFT)的第一性原理,对稀土掺杂TiO2前后的几何结构、能带结构、态密度及电子结构进行了系统的研究.结果表明,Y,La,Gd,Lu,Ce,Eu,Yb和Tb掺杂有助于TiO2光催化活性的提高;而对于Pr,Nd,Pm,Sm,Dy,Ho,Er和Tm掺杂,由于在价带顶和导带底之间形成了较多的可能成为光生电子和空穴的复合中心的杂质能级,故此类稀土的掺杂浓度需要控制在较小的范围内.另一方面,采用溶胶-凝胶法制备了9种稀土金属(RE=Y,Ce,Pr,Sm,Gd,Dy,Ho,Er,Yb)掺杂的TiO2粉体,运用X射线衍射(XRD)和紫外-可见光谱法(UV-Vis)分别表征其晶体结构和光学吸收性质.结果表明,掺杂前后的TiO2均为锐钛矿相,且Ho,Pr,Ce,Sm,Y,Yb和Gd掺杂使TiO2在可见光区的吸收有不同程度的提高.理论预测与实验结果基本一致,且理论研究结果与周期表中稀土元素外层电子轨道排布规律一致,从而揭示了稀土元素掺杂的本质规律,指明了适量的稀土掺杂有利于TiO2光催化活性的提高.     

Comparison of electrode structures and photovoltaic properties of porphyrin-sensitized solar cells with TiO2 and Nb, Ge, Zr-added TiO2 composite electrodes

Electrode structures and photovoltaic properties of porphyrin-sensitized solar cells with TiO2 and Nb-, Ge-, and Zr-added TiO2 composite electrodes were examined to disclose the effects of partial substitution of Ti atom by the other metals in the composite electrodes. The TiO2 and Nb-, Ge-, and Zr-added TiO2 composite electrodes were prepared by sol-gel process using laurylamine hydrochloride as a template for the formation of micellar precursors yielding well-defined mesoporous nanocrystalline structures, as in the cases of the formation of silica and titania tubules and nanoparticles by the templating mechanism. The TiO2 and Nb-, Ge-, and Zr-added TiO2 composite electrodes were characterized by transmission electron microscopy, BET surface area analysis, X-ray diffraction analysis, Raman spectroscopy, and impedance measurements. The TiO2 anatase nanocrystalline structure is retained after doping a small amount (5 mol %) of Nb, Ge, or Zr into the TiO2 structure, suggesting the homogeneous distribution of the doped metals with replacing Ti atom by the doped metal. The power conversion efficiency of the porphyrin-sensitized solar cells increases in the order Zr-added TiO2 (0.8%) < Nb-added TiO2 (1.2%) < TiO2 (2.0%) < Ge-added TiO2 cells (2.4%) under the same conditions. The improvement of cell performance of the Ge-added TiO2 cell results from the negative shift of the conduction band of the Ge-added TiO2 electrode. The Ge-added TiO2 cell exhibited a maximum power conversion efficiency of 3.5% when the porphyrin was adsorbed onto the surface of the Ge-added TiO2 electrode with a thickness of 4 microm in MeOH for 1 h.     

Al掺杂对锐钛矿型TiO2光催化性能影响的研究

采用平面波赝势(PWPP)方法进行密度泛函(DFT)计算,研究了Al掺杂对锐钛矿晶体能带、态密度的影响.分析发现掺杂后Al原子3s和3p轨道上的电子虽然对晶体的价带和导带贡献不大,却诱使导带发生较大程度下移,禁带宽度减小,理论预测可以发生红移.采用低温燃烧合成法制备了Al掺杂锐钛矿型纳米TiO2,紫外-可见吸收光谱检测和甲基橙降解实验证明,Al掺杂TiO2光吸收强度增强,吸收带边界发生红移;光催化性能较纯TiO2有所改善.理论计算结果与实验结果相符.     

过渡金属掺杂TiO_2/活性炭复合体的制备及双协同光催化性能

以活性炭为载体,通过溶胶-凝胶法分别制备了Fe、Ag、Zn、Mn和Cr过渡金属离子掺杂TiO2/活性炭(X-TiO2/AC,X-TA;X:过渡金属离子)复合体,利用X射线衍射(XRD)、比表面积(BET)、X光电子能谱(XPS)、扫描电镜(SEM)、电子自旋共振谱(ESR)和荧光光谱(FS)对其结构进行表征.以罗丹明B的光催化降解为探针实验,评价掺杂负载型复合体的双协同光催化性能和使用寿命,提出双协同光催化扩增机制,并探讨了掺杂率和负载率对双协同扩增效果影响.结果表明:通过活性炭吸附和离子掺杂对TiO2光催化性能表现出双协同扩增作用,导致X-TA对罗丹明B的降解速率常数kapp大于掺杂X-TiO2粉体和TA负载体之和.同时,掺杂率和负载率共同影响协同效应,当Fe离子掺杂率和Fe-TiO2负载率分别为0.3%和10%时,Fe-TA复合体kapp最大为0.0208min-1.另外,过渡金属离子掺杂对TiO2光催化性能提高程度按掺杂离子Ag、Zn、Mn、Cr、Fe递增.掺杂后金属离子的价态、得电子能力、比表面积和掺杂TiO2颗粒尺寸上的差异决定了不同离子掺杂负载型复合体催化性能不同,复合体寿命降低的主要原因是由于活性组分从载体上流失所引起.     

N／F掺杂和N-F双掺杂锐钛矿相TiO2（101）表面电子结构的第一性原理计算

采用密度泛函理论(DFT)平面波赝势方法计算了N/F掺杂和N-F双掺杂锐钛矿相TiO2(101)表面的电子结构.由于DFT方法存在对过渡金属氧化物带隙能的计算结果总是与实际值严重偏离的缺陷,本文也采用DFT+U(Hubbard系数)方法对模型的电子结构进行了计算.DFT的计算结果表明N掺杂后,N2p轨道与O 2p和Ti 3d价带轨道的混合会导致TiO2带隙能的降低,而F掺杂以及氧空位的引入对材料的电子结构没有明显的影响.DFT+U的计算却给出截然不间的结果,N掺杂并没有导致带隙能的降低,而只是在带隙中引入一个孤立的杂质能级,反而F掺杂以及氧空位的引入带来明显的带隙能降低.DFT+U的计算结果与一些实验测量结果能够较好地符合.     

N/F掺杂和N-F双掺杂锐钛矿相TiO2(101)表面电子结构的第一性原理计算

采用密度泛函理论(DFT)平面波赝势方法计算了N/F掺杂和N-F双掺杂锐钛矿相TiO2(101)表面的电子结构. 由于DFT方法存在对过渡金属氧化物带隙能的计算结果总是与实际值严重偏离的缺陷, 本文也采用DFT+U(Hubbard 系数)方法对模型的电子结构进行了计算. DFT的计算结果表明N掺杂后, N 2p轨道与O 2p和Ti 3d价带轨道的混合会导致TiO2带隙能的降低, 而F掺杂以及氧空位的引入对材料的电子结构没有明显的影响. DFT+U的计算却给出截然不同的结果, N掺杂并没有导致带隙能的降低, 而只是在带隙中引入一个孤立的杂质能级, 反而F掺杂以及氧空位的引入带来明显的带隙能降低. DFT+U的计算结果与一些实验测量结果能够较好地符合.     

A DFT study on structural stability and electronic property of VIIIB transition metal-doped carbon nanocaps

Carbon nanocap (CNC) was selected for the systems doped with VIIIB transition metal (TM) atoms. The geometrical structures and electronic properties of TM-doped CNCs were calculated using the density functional theory method. It was found that TM atoms can interact with CNC to form TM–CNC complexes, which corresponded with the large partial charge transfer. All of molecular orbitals of TM–CNC complexes were localized in vicinity doping site. The density of states of these TM-doped CNCs were exhibited mostly metallic or narrow–gap semiconductor.     

The electronic origin of the visible-light absorption properties of C-, N- and S-doped TiO2 nanomaterials

The origin of the visible-light absorption of main-group element (C, N, S) doped TiO2 nanostructures is investigated via diffuse reflectance and valence band X-ray photoelectron spectroscopy. The synthesized C-, N-, and S-doped titania nanomaterials show an increased electron density of states above the valence band of TiO2, which explains the red-shifted light absorption of these potential photocatalysts and simultaneously suggests a lowered potential as photooxidants compared to Degussa P25 TiO2.     

Theoretical study of N-doped TiO2 rutile crystals

The N-doping effects on the electronic and optical properties of TiO2 rutile crystal have been studied using density functional theory (DFT). The calculations of several possible N-doped structures show that band gaps have little reduction but some N 2p states lie within the band gap in the substitutional N to O structure and interstitial N-doped rutile supercell, which results in the reduction of the photon-transition energy and absorption of visible light. In contrast, substitutional N to Ti doped model has a significant band-gap narrowing. The results maybe clarify confusions in nitrogen-doped TiO2 rutile crystal.     

(Co,P)双掺杂MgF2电子结构和光学性质的第一性原理研究

基于密度泛函理论(DFT)的第一性原理平面波超软赝势方法,计算了纯MgF2晶体、Co掺杂MgF2晶体、P掺杂MgF2晶体和(Co,P)双掺杂MgF2晶体的电子结构和光学特性.结果表明,掺杂后的MgF2晶体发生了畸变,原子之间的键长也有所变化.(Co,P)双掺杂后,由于非金属原子p态和金属原子d态之间的轨道杂化,在MgF...     

过渡金属离子掺杂改性TiO2的光催化性能研究进展

 对近年来利用过渡金属离子掺杂改性TiO2的光催化性能研究进行了综述．分析了掺杂金属离子的种类、掺杂浓度和掺杂制备方式等对TiO2光催化性能的影响,并提出了今后的研究方向．     

Effect of Zr and C Co-doping on the Optical Properties and Electronic Structure of TiO_2

The systematic trends and effect introduced by Zr and C co-doping to TiO2 of electronic structure and optical properties of anatase TiO2 have been calculated by the plane-wave ultra-soft pseudopotential density functional theory (DFT) method within the generalized gradient approximation (GGA) for the exchange-correlation potential. Through the current calculations, the density of states (DOS), energy band structure and optical absorption coefficients have been obtained for TiO2 and compared with the doped TiO2, and the influence of electronic structure and optical properties caused by Zr and C co-doping has been presented qualitatively together. The results revealed that the energy band gap has been decreased owing to the doped Zr and C, whereas the optical absorption coefficients have been increased in the region of 400～800 nm and a red shift of absorption band can be found. Accordingly, photo catalytic activity of TiO2 has been enhanced. The current calculations are in good agreement with the experimental data.     

过渡金属元素Sc、Cr和Mn对Mg2Ge掺杂的第一性原理研究

基于密度泛函理论(DFT)的第一性原理计算,研究了过渡金属元素Sc、Cr和Mn掺杂对Mg₂Ge晶体光、电、磁性质的影响。结果表明,Sc掺杂能使Mg₂Ge的费米能级进入导带,呈n型简并半导体;Cr和Mn掺杂能使Mg₂Ge能带结构和态密度在费米能级附近产生自旋劈裂而形成净磁矩,表现为半金属磁体和稀磁半导体,体系净磁矩均来自杂质原子3d轨道电子及其诱导极化的Ge4p态和Mg2p态自旋电子。与本征Mg₂Ge相比,掺杂体系静态介电常数增大,扩展了吸收光谱,提升了近红外光波段吸收能力。     

Nitrogen and sulfur co-doped TiO2 nanosheets with exposed {001} facets: synthesis, characterization and visible-light photocatalytic activity

Nitrogen and sulfur co-doped TiO(2) nanosheets with exposed {001} facets (N-S-TiO(2)) were prepared by a simple mixing-calcination method using the hydrothermally prepared TiO(2) nanosheets powder as a precursor and thiourea as a dopant. The resulting samples were characterized by transmission electron microscope, X-ray diffraction, N(2) adsorption-desorption isotherms, X-ray photoelectron spectroscopy, and UV-Vis absorption spectroscopy. The electronic properties of N,S co-doped TiO(2) were studied using the first-principle density functional theory (DFT). The photocatalytic activity of N-S-TiO(2) was evaluated by degradation of 4-chlorophenol (4-CP) aqueous solution under visible light irradiation. The production of hydroxyl radicals (˙OH) on the surface of visible-light-irradiated samples was detected by photoluminescence technique using terephthalic acid as a probe molecule. The results show that nitrogen and sulfur atoms were successfully incorporated into the lattice of TiO(2), which resulted in N-S-TiO(2) samples exhibiting stronger absorption in the UV-visible range with a red shift in the band gap transition. The first-principle DFT calculations further confirm that N and S co-dopants can induce the formation of new energy levels in the band gap, which is associated with the response of N-S-TiO(2) nanosheets to visible light irradiation. Surprisingly, pure TiO(2) nanosheets show the visible-light photocatalytic activity for the degradation of 4-CP mainly due to the substrate-surface complexation of TiO(2) and 4-CP, which results in extending absorption of titania to visible light region through ligand-to-titanium charge transfer. The N-S-TiO(2) samples studied exhibited an enhanced visible-light photocatalytic activity than pure TiO(2). Especially, the doped TiO(2) sample at the nominal weight ratio of thiourea to TiO(2) powder of 2 showed the highest photocatalytic activity, which was about twice greater than that of Degussa P25. The enhanced activity of N-S-TiO(2) can be primarily attributed to the synergetic effects of two factors including the intense absorption in the visible-light region and the exposure of highly reactive {001} facets of TiO(2) nanosheets. The former is beneficial for the photogeneration of electrons and holes participating in the photocatalytic reactions, and the latter facilitates adsorption of 4-CP molecules on the surface of TiO(2) nanosheets.     

直流反应磁控溅射制备的Mo掺杂TiO2薄膜的光电特性

通过直流反应磁控溅射制备了不同Mo掺杂量的Mo-TiO2薄膜.用原子力显微镜(AFM)、X射线衍射(XRD)仪、X射线光电子能谱(XPS)仪、紫外-可见(UV-Vis)分光光度计详细研究了Mo掺杂量对薄膜表面形貌、晶体结构、元素价态及吸收带边的影响.用瞬态光电流和循环伏安法考察了不同Mo含量ITO/Mo-TiO2电极的光电特性.结果表明:在TiO2薄膜中掺入的Mo以Mo6+和Mo5+两种价态存在;随着Mo掺杂量的增加,Mo-TiO2薄膜的晶粒尺寸逐渐减小,晶格畸变增大,吸收阈值显著红移;薄膜的禁带宽度先减小后增大,在Mo掺杂量为2.7%(n(Mo)/n(Ti))时禁带宽度最小;Mo掺杂量为0.9%的样品在氙灯下的光生电流最大,且随着所加阳极偏压的提高光生电流并未呈现出饱和的趋势.此后随着掺杂量的提高,薄膜的光生电流开始下降,当Mo掺杂量达到3.6%时,薄膜的光电流小于未掺杂的样品;说明适当浓度的Mo掺杂能够提高Mo-TiO2薄膜光电性能,光生电流最大可达未掺杂的2.4倍.     

Multivalency iodine doped TiO2: preparation, characterization, theoretical studies, and visible-light photocatalysis

Multivalency iodine (I(7)+/I(-)) doped TiO(2) were prepared via a combination of deposition-precipitation process and hydrothermal treatment. The as-prepared samples were characterized by X-ray diffraction, transmission electron microscopy, Brunauer-Emmett-Teller surface area, UV-vis diffuse reflectance spectra, X-ray photoelectron spectroscopy, surface photovoltage spectroscopy, and electric-field-induced surface photovoltage spectroscopy. The electronic structure calculations based on the density functional theory revealed that upon doping, new states that originated from the I atom of the IO(4) group are observed near the conduction-band bottom region of TiO(2), and the excitation from the valence band of TiO(2) to the surface IO(4-) is responsible for the visible-light response of the I-doped TiO(2). The as-prepared I-doped TiO(2) showed high efficiency for the photocatalytic decomposition of gaseous acetone under visible light irradiation (lambda > 420 nm). A possible mechanism for the photocatalysis on this multivalency iodine (I(7)+/I(-)) doped TiO(2) under visible light was also proposed.     

Band‐Gap Control of Zinc Sulfide: Towards an Efficient Visible‐Light‐Sensitive Photocatalyst

The electronic properties of transition‐metal‐doped zinc sulfide (ZnS) have been investigated by using first‐principles calculations. Transition‐metal doping can allow electronic transitions at energies corresponding to visible‐light wavelengths, thus potentially resulting in increased photocatalytic efficiency under sunlight. In particular, our calculations show that transition‐metal atoms that produce little lattice strain, such as Co, Ni, Mn, and Fe, can be readily incorporated in ZnS. Due to their low formation energies and appropriate band energies, we predict that Ni‐ and Co‐doped ZnS will be promising materials for photocatalytic hydrogen production.     

Electronic and magnetic properties of all 3d transition‐metal‐doped ZnO monolayers

Stable geometries, electronic structures, and magnetic properties of the ZnO monolayer doped with 3d transition‐metal (TM) (Sc, Ti, V, Cr, Mn, Fe, Co, Ni, and Cu) atoms substituting the cation Zn have been investigated using first‐principles pseudopotential plane wave method within density functional theory (DFT). It is found that these nine atomic species can be effectively doped in the ZnO monolayer with formation energies ranging from ?6.319 to ?0.132 eV. Furthermore, electronic structures and magnetic properties of ZnO monolayer can be modified by such doping. The results show that the doping of Cr, Mn, Fe, Co, Ni, and Cu atoms can induce magnetization, while no magnetism is observed when Sc, Ti, and V atoms are doped into the ZnO monolayer. The magnetic moment is mainly due to the strong p–d mixing of O and TM (Cr, Mn, Fe, Co, Ni, and Cu) orbitals. These results are potentially useful for spintronic applications and the development of magnetic nanostructures. © 2013 Wiley Periodicals, Inc.     

Pyrogenic iron(III)-doped TiO2 nanopowders synthesized in RF thermal plasma: phase formation, defect structure, band gap, and magnetic properties

Iron(III)-doped TiO(2) nanopowders, with controlled iron to titanium atomic ratios (R(Fe/Ti)) ranging from nominal 0 to 20%, were synthesized using oxidative pyrolysis of liquid-feed metallorganic precursors in a radiation-frequency (RF) thermal plasma. The valence of iron doped in the TiO(2), phase formation, defect structures, band gaps, and magnetic properties of the resultant nanopowders were systematically investigated using M?ssbauer spectroscopy, XRD, Raman spectroscopy, TEM/HRTEM, UV-vis spectroscopy, and measurements of magnetic properties. The iron doped in TiO(2) was trivalent (3+) in a high-spin state as determined by the isomer shift and quadrupole splitting from the M?ssbauer spectra. No other phases except anatase and rutile TiO(2) were identified in the resultant nanopowders. Interestingly, thermodynamically metastable anatase predominated in the undoped TiO(2) nanopowders, which can be explained from a kinetic point of view based on classical homogeneous nucleation theory. With iron doping, the formation of rutile was strongly promoted because rutile is more tolerant than anatase to the defects such as oxygen vacancies resulting from the substitution of Fe(3+) for Ti(4+) in TiO(2). The concentration of oxygen vacancies reached a maximum at R(Fe/Ti) = 2% above which excessive oxygen vacancies tended to concentrate. As a result of this concentration, an extended defect like crystallographic shear (CS) structure was established. With iron doping, red shift of the absorption edges occurred in addition to the d-d electron transition of iron in the visible light region. The as-prepared iron-doped TiO(2) nanopowders were paramagnetic in nature at room temperature.     

ANiN(A=Li,Na,Mg,Ca)的结构、热力学、弹性和电子性质的第一性原理研究

三元过渡金属氮化物ANiN(A=Li,Na,Mg,Ca)是潜在的可充放电池的电极材料.物理性质,比如热稳定性、电子能隙以及弹性稳定性等,对于这些材料的电池应用都是非常重要的.本文使用第一原理方法,对比研究了 ANiN这些材料的结构、动力学、弹性和电子结构性质.对状态方程和声子谱的计算被用来确定体系的稳定结构.对最稳定结...