The modification of the triple helical structure of gelatin in aqueous solution 3. The influence of nonionic surfactants

Using CD-measurements the influence of nonionic surfactants (dodecyl polyoxyethylene, ethoxylated para tert. octyl phenol, commercial nonionic WON 100 and octyl diethyl phosphinoxid) on the secondary structure of gelatin in aqueous solutions was investigated. At surfactant concentrations smaller than the c.m.c. the triple helical content of the gelatin is increased. At concentrations exceeding the c.m.c. the triple helical content decreases. Chain reversals of the peptide chains after the destruction of the triple helical structure were shown to appear in acidic environment at 298 K. This destruction is reversible by rechilling the solution.     

The modification of the triple helical structure of gelatin in aqueous solution I. The influence of anionic surfactants,pH-value,and temperature

The modification of the triple helical structure in aqueous gelatin solutions by changing pH and adding alkyl sulphates at 298 K and after rechilling the solution to 283 K was investigated by CD-measurement. At 298 K the triple helical content at the IEP of the gelatin has its maximum value. It is only weakly affected by adding sodium dodecyl sulphate (SDDS) at concentrations <10^–4 M/dm³. The unfolding of the triple helix affected by pH and SDDS is reversible by rechilling the solution. The triple helical content of gelatin solutions decreases at SDDS concentrations higher than 10^–4 M/dm³. In all cases the decrease of the amount of triple helical structure is connected with an increase of the cis-configuration in single chains and leads to chain reversals. At sufficiently high SDDS concentrations-sheets are formed. These changes are thermally irreversible. Sodium decyl sulphate (SDS) has a more minor influence than SDDS except in the range of the c.m.c. of SDS. At sufficiently high SDS concentrations,-turns appear.     

The role of surface viscoelasticity in slide coating processes

In the slide hopper coating process for simultaneously applying multiple layers of coating liquids to a moving web, surfactants must be added to the photographic emulsion to ensure a stable position of the liquid bridge formed between the lower edge of the slide hopper and the moving web. In slide coating of gelatin solutions without an added surfactant, the liquid bridge becomes instable and begins to oscillate if critical coating conditions are reached. The addition of anionic surfactants stabilizes the liquid bridge against oscillations. The action of the added surfactants is a result of their interaction with gelatin. The degree of binding can be used as a measure of the interaction. The binding of anionic and cationic surfactants to gelatin was investigated using a surfactant-selective electrode. The binding isotherms of the surfactants to an alkali-processed bone gelatin were determined and compared with the surface dilational properties of the gelatin/surfactant adsorption layers. The comparison of surface rheological data obtained by the oscillating bubble method with the results of coating experiments demonstrates that the viscoelastic properties of gelatin/anionic surfactant adsorption layers are of essential importance to the stabilization of the liquid bridge against oscillations. Pure elastic adsorption layers are not able to stabilize the liquid bridge. The mechanism of the stabilizing action is discussed. Received: 30 October 2000/Revised: 12 February 2001/Accepted: 14 February 2001     

The influence of surfactants on the structure of transparent gelatin films

The interference image of cold-dried transparent gelatin films containing different surfactants was determined in the conoscopic ray of monochromatic light. From the results obtained the order of the structure of gelatin in the film was characterized. Unlike the ionic surfactants (sodium dodecyl sulfate and hexadecyltrimethyl ammonium bromide), which lead to a reduction of the ordered structure, the addition of nonionic and amphoteric surfactants [ethoxylized octylphenole and a technical C₁₂/C₁₄-dipoly(oxyethylene)ammoniopropane sulfonate] causes an increase of the ordered structure of gelatin. The results quantitatively agree with those found for the influence of surfactants on the secondary structure of gelatin in diluted gelatin solutions. The influence is independent of the gelatin/surfactant ratio and has been explained by gelatin/gelatin interaction competing with the gelatin/surfactant interaction if the gelatin concentration becomes sufficiently high.     

Microstructure of un-neutralized hydrophobically modified alkali-soluble emulsion latex in different surfactant solutions

At low pH conditions and in the presence of anionic, cationic, and nonionic surfactants, hydrophobically modified alkali-soluble emulsions (HASE) exhibit pronounced interaction that results in the solubilization of the latex. The interaction between HASE latex and surfactant was studied using various techniques, such as light transmittance, isothermal titration calorimetry, laser light scattering, and electrophoresis. For anionic surfactant, noncooperative hydrophobic binding dominates the interaction at concentrations lower than the critical aggregation concentration (CAC) (C < CAC). However, cooperative hydrophobic binding controls the formation of mixed micelles at high surfactant concentrations (C > or = CAC), where the cloudy solution becomes clear. For cross-linked HASE latex, anionic surfactant binds only noncooperatively to the latex and causes it to swell. For cationic surfactant, electrostatic interaction occurs at very low surfactant concentrations, resulting in phase separation. With further increase in surfactant concentration, noncooperative hydrophobic and cooperative hydrophobic interactions dominate the binding at low and high surfactant concentrations, respectively. For anionic and cationic surfactant systems, the CAC is lower than the critical micelle concentration (CMC) of surfactants in water. In addition, counterion condensation plays an important role during the binding interaction between HASE latex and ionic surfactants. In the case of nonionic surfactants, free surfactant micelles are formed in solution due to their relatively low CMC values, and HASE latexes are directly solubilized into the micellar core of nonionic surfactants.     

N-烷基-N,N-二(2-羟乙基)-N-甲基溴化铵与牛血清白蛋白的相互作用

用荧光光谱法在298K研究了Tris-HCl缓冲溶液(pH=7.1)中系列N-烷基-N,N-二(2-羟乙基)-N-甲基溴化铵(烷基链长为C12到C16)与牛血清白蛋白(BSA)的结合作用,考察了表面活性剂结构、BSA浓度对结合作用的影响,分别用Stern-Volmer方程、虚拟结合常数模型探讨了表面活性剂在浓度较低区域与BSA的作用机制.结果表明:三种季铵盐表面活性剂均对BSA内源荧光有猝灭作用,并导致其最大发射波长蓝移;表面活性剂的烷基链越长,Stern-Volmer猝灭常数和虚拟结合常数越大,表面活性剂与BSA的结合作用也越强.     

Synergism in the spreading of hydrocarbon-chain surfactants on polyethylene film-anionic and cationic mixtures by a two-step procedure

A study has been made of the adsorption, interaction, and spreading of mixtures of anionic and cationic surfactants at the aqueous solution/polyethylene (PE) interface. When a drop of an aqueous solution of an anionic or cationic hydrocarbon-chain surfactant is placed on a highly hydrophobic PE film (contact angle of water > 90 degrees ), it spreads to an area very little larger than that of a drop of water of the same volume. If the anionic and cationic hydrocarbon-chain surfactant solutions are mixed prior to being applied to PE film, synergism is small, if any, and the reproducibility of the experimental results is poor. However, when the cationic and anionic aqueous solutions are applied on the PE film in a sequential manner, a remarkable synergism in spreading is observed and the results are very reproducible. The area spread by an aqueous solution of the anionic-cationic mixture may be more than 400 times that of aqueous solutions of the same volume and surfactant concentration of the individual surfactant components. Previous work in this laboratory on surfactant systems showing synergism in spreading on PE film, but only weak interaction at the aqueous solution/air interface, showed that the synergy was due to changes at the aqueous solution/PE interface and not to the changes at the aqueous solution/air or PE/air interface. Investigation of the adsorption behavior at the aqueous solution/solid interface of two of the anionic-cationic mixtures studied here indicates the reason for differences in spreading behavior observed with different anionic-cationic mixtures. The more similar the adsorption tendencies at the solid/aqueous solution interface of the anionic and cationic surfactants, and the closer their adsorption to an equimolar monolayer there, the stronger their interaction there and the greater their enhancement of the spreading. A mechanism is proposed for the synergy in spreading observed, based upon the difference between the surface tension in the precursor film at the spreading interface and that at the top of the spreading drop.     

Spectrophotometric study of anionic azo-dye light yellow (X6G) interaction with surfactants and its micellar solubilization in cationic surfactant micelles

Solubilization and interaction of azo-dye light yellow (X6G) at/with cationic surfactants cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC) was investigated spectrophotometricaly. The effect of cationic micelles on solubilization of anionic azo dye in aqueous micellar solutions of cationic surfactants was studied at pH 7 and 25 degrees C. The binding of dye to micelles implied a bathochromic shift in dye absorption spectra that indicates dye-surfactant interaction. The results showed that the solubility of dye increased with increasing surfactant concentration, as a consequence of the association between the dye and the micelles. The binding constants, K(b), were obtained from experimental absorption spectra. By using pseudo-phase model, the partition coefficients between the bulk water and surfactant micelles, K(x), were calculated. Gibbs energies of binding and distribution of dye between the bulk water and surfactant micelles were estimated. The results show favorable solubilization of dye in CTAB micelles.     

Forces between glass surfaces in mixed cationic-zwitterionic surfactant systems

We report atomic force microscopy (AFM) measurements of the forces between borosilicate glass solids in aqueous mixtures of cationic and zwitterionic surfactants. These forces are used to determine the adsorption of the surfactant as a function of the separation between the interfaces (proximal adsorption) through the application of a Maxwell relation. In the absence of cationic surfactant, the zwitterionic surfactant N-dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (DDAPS) undergoes little adsorption to glass at concentrations up to about 2/3 critical micelle concentration (cmc). In addition, DDAPS does not have much effect on the forces over the same concentration range. In contrast, the cationic surfactant dodecylpyridinium chloride (DPC) does adsorb to glass and does affect the force between glass surfaces at concentrations much lower than the cmc. In the presence of a small amount of DPC (0.05 mM = cmc/300), the net force between the glass surfaces is quite sensitive to the solution concentration of DDAPS. A model-independent thermodynamic argument is used to show that the surface excess of DDAPS depends on the separation between the glass interfaces when the cationic surfactant is present and that the surface excess of the cationic surfactant is more sensitive to interfacial separation in the presence of the zwitterionic surfactant. The change in adsorption of the zwitterionic surfactant is explained in terms of an intermolecular coupling between the long-range electrostatic force acting on the cationic surfactant and the short-range hydrophobic interaction between the alkyl chains on the cationic and zwitterionic surfactants. The adsorptions of cationic and zwitterionic surfactants in mixtures were measured independently and simultaneously by attenuated total internal reflection infrared spectroscopy (ATR-IR). The adsorption of the zwitterionic surfactant is enhanced by the presence of a small amount of cationic surfactant.     

苄泽类非离子型表面活性剂与明胶的相互作用

采用表面张力和稳态荧光光谱法考察了具有不同疏水结构的2种苄泽类非离子型表面活性剂Brij58和Brij78与明胶之间的相互作用。结果表明,苄泽类非离子型表面活性剂与明胶之间相互作用的驱动力为疏水作用力,且两者之间的相互作用受到其疏水基团的影响,Brij78在明胶溶液中的临界聚集浓度低于Brij58体系,表明疏水链更长的Brij78与明胶之间的相互作用更强。明胶分子的内源荧光光谱强度受苄泽类非离子型表面活性剂的影响,但最大吸收峰位置未发生蓝移,Brij78/明胶体系的内源荧光强度高于Brij58/明胶体系;此外,表面活性剂浓度较低时,明胶的加入使溶液中疏水微区极性明显降低,且明胶浓度越大降低程度越大。     

The Interaction between High-Molecular-Weight Flocculents and Ionic Surfactants

The interaction between the anionic and cationic polyelectrolytes of various molecular masses and charges and the ionic surfactants in aqueous and salt solutions is studied by viscometry, conductometry, light scattering, and electrophoresis. Oppositely charged molecules of surfactant and polymer form strong complexes due to the forces of electrostatic attraction that is manifested in a significant decrease in the viscosity and light transmission, as well as in the relative reduction in solution conductivity. As the surfactant/polyelectrolyte ratio increases, the forming complexes precipitated and then dissolved again. In the case of strongly charged polyelectrolytes, the partial dissolution of precipitates was observed preceding the wide region of destabilization. In this region, the value of surfactant/polyelectrolyte charge ratio reaches 3–4. The interaction between the cationic surfactants and anionic polyelectrolyte increases with the lengthening of alkyl radical, thus indicating the presence of cooperative interactions between the surfactant molecules bonded to polymer and the important role of relevant hydrophobic interactions. As a result, the interaction between the high-molecular-weight anionic polyelectrolytes and anionic surfactants containing aromatic core takes place in some cases.     

The Interaction Between N–Isopropylacrylamide-Acrylic Acid-Ethyl Methacrylate Thermosensitive Polymers and Cationic Surfactants

The interaction between cationic surfactants and isopropylacrylamide-acrylic acid-ethyl methacrylate (IPA:AA:EMA) terpolymers has been investigated using steady-state fluorescence and spectrophotometric measurements to assess the effect of the polymer composition on the aggregation process and terpolymers’ thermosensitivities. Micropolarity studies using pyrene show that the interaction of cationic surfactants with IPA:AA:EMA terpolymers occurs at surfactant concentrations much smaller than that observed for the pure surfactant in aqueous solution. The critical aggregation concentration (CAC) values decrease with both the hydrocarbon length of the surfactant and the content of ethyl methacrylate. These results were interpreted as a manifestation of the increasing contribution of attractive hydrophobic and electrostatic forces between negatively charged polymer chains and positively charged surfactant molecules. The increase of ethyl methacrylate in the copolymers lowers the CAC due to the larger hydrophobic character of the polymer backbone. The cloud point determination reveals that the lower critical solution temperatures (LCST) depend strongly on the copolymer composition and surfactant nature. The binding of surfactants molecules to the polymer chain screens the electrostatic repulsion between the carboxylic groups inducing a conformational transition and the dehydration of the polymer chain.     

Vesicles of a new salt-free cat-anionic fluoro/hydrocarbon surfactant system

Weakly basic tetradecyldimethylaminoxide (C14DMAO) molecules can be protonated to form a cationic surfactant, C14DMAOH+, by an acidic fluorocarbon surfactant, an 8-2-fluorotelomer unsaturated acid (C7F15CF==CHCOOH), to form a salt-free cationic and anionic (cat-anionic) fluoro/hydrocarbon surfactant system in aqueous solution. The high Krafft point of C7F15CF==CHCOOH was largely reduced as a result of being mixed with a C14DMAO micelle solution. A study of the phase behavior of the new salt-free cat-anionic fluoro/hydrocarbon surfactant system clearly indicates the existence of a birefringent Lalpha-phase region at (25.0+/-0.1) degrees C. The birefringent Lalpha phase consists of vesicles, which include uni- and multilamellar vesicles with one to dozens of shells, and oligovesicular vesicles, as demonstrated by freeze-fracture and cryo-transmission electron microscopy (FF- and cryo-TEM) images. The size distribution and structural transitions in the salt-free cat-anionic fluoro/hydrocarbon surfactant system were studied by dynamic light scattering (DLS) and 1H and 19F NMR spectroscopy. The formation of a salt-free cat-anionic vesicle phase could be induced by the strong electrostatic interaction between the cationic hydrocarbon C14DMAOH+ and the anionic fluorocarbon C7F15CF==CHCOO-, which provided evidence that the electrostatic interaction between the cationic and anionic surfactants is larger than the nonsynergistic interaction between the stiff fluorocarbon and the soft hydrocarbon chains of the surfactants.     

Assessment of the Surface Heterogeneity of Talc Materials

The hydrophobic and hydrophilic components of the surface of talc materials in aqueous solution were determined using ionic surfactants and their polar headgroup adsorption isotherms. The hydrophilic and hydrophobic surface areas are inferred from the amount of probe molecule adsorbed and the structure of the adsorbed layer. Natural dispersion of talc shows at 298 K a pH of 9.4 and the electrophoretic measurements indicate that the particles are negatively charged. The hydrophilic surface area is estimated from the adsorption of benzyltrimethylammonium ions (BTMA(+)) through electrostatic interactions as supported by the increase of divalent ions in the bulk phase and the decrease in the exothermic displacement enthalpy. It was also observed from the adsorption isotherm of benzene sulfonate anions that the density of positive surface sites is very low and is thus neglected. The adsorption of an anionic surfactant essentially occurs through dispersive interactions between the nonpolar organic tail of the molecule and the hydrophobic surface. Furthermore, some assumptions on the structure of dodecyl sulfate surfactant aggregates at the interface allow the hydrophobic part of the talc particles to be estimated. The cationic surfactant adsorption has been investigated and found to corroborate the hydrophilic and hydrophobic area values first obtained. Copyright 2001 Academic Press.     

Variegated micelle surfaces: correlating the microstructure of mixed surfactant micelles with bulk solution properties

Electron paramagnetic resonance, viscosity, and small-angle neutron scattering (SANS) measurements have been used to study the interaction of mixed anionic/nonionic surfactant micelles with the polyampholytic protein gelatin. Sodium dodecyl sulfate (SDS) and the nonionic surfactant dodecylmalono-bis-N-methylglucamide (C12BNMG) were chosen as "interacting" and "noninteracting" surfactants, respectively; SDS micelles bind strongly to gelatin but C12BNMG micelles do not. Further, the two surfactants interact synergistically in the absence of the gelatin. The effects of total surfactant concentration and surfactant mole fraction have been investigated. Previous work (Griffiths et al. Langmuir 2000, 16 (26), 9983-9990) has shown that above a critical solution mole fraction, mixed micelles bind to gelatin. This critical mole fraction corresponds to a micelle surface that has no displaceable water (Griffiths et al. J. Phys. Chem. B 2001, 105 (31), 7465). On binding of the mixed micelle, the bulk solution viscosity increases, with the viscosity-surfactant concentration behavior being strongly dependent on the solution surfactant mole fraction. The viscosity at a stoichiometry of approximately one micelle per gelatin molecule observed in SDS-rich mixtures scales with the surface area of the micelle occupied by the interacting surfactant, SDS. Below the critical solution mole fraction, there is no significant increase in viscosity with increasing surfactant concentration. Further, the SANS behavior of the gelatin/mixed surfactant systems below the critical micelle mole fraction can be described as a simple summation of those arising from the separate gelatin and binary mixed surfactant micelles. By contrast, for systems above the critical micelle mole fraction, the SANS data cannot be described by such a simple approach. No signature from any unperturbed gelatin could be detected in the gelatin/mixed surfactant system. The gelatin scattering is very similar in form to the surfactant scattering, confirming the widely accepted picture that the polymer "wraps" around the micelle surface. The gelatin scattering in the presence of deuterated surfactants is insensitive to the micelle composition provided the composition is above the critical value, suggesting that the viscosity enhancement observed arises from the number and strength of the micelle-polymer contact points rather than the gelatin conformation per se.     

Influence of Nonionic Surfactant on Alkaline Hydrolysis of Methyl Violet Catalyzed by Cetyltrimethylammonium Bromide

The alkaline hydrolysis of methyl violet (MV) was studied by spectrophotometric method under pseudo-first-order conditions at 298 K. Cationic surfactant cetyltrimethylammonium bromide (CTAB) catalyzed the reaction. Addition of nonionic surfactant Triton X-100 (TX-100) exhibited significant influence on the CTAB catalyzed reaction by lowering the extent of catalysis. The kinetic data were analyzed by Piszkiewicz model of positive cooperativity. Linear Hill-type plots were generated with indices of cooperativity values greater than unity. The effect of counterions on the reaction rates was also studied in the presence of cationic surfactant (CTAB) and cationic–nonionic mixed surfactants (CTAB/TX-100).     

Rheological properties of the aqueous solution for fluorocarbon‐containing hydrophobically modified sodium polyacrylic acid with various surfactants

The interaction of fluorocarbon‐ containing hydrophobically modified sodium polyacrylic acid (FMPAANa) (0.5 wt%) with various surfactants (anionic, nonionic and cationic) has been investigated by rheological measurements. Different rheological behaviors are displayed for ionic surfactants and nonionic surfactants. Fluorinated surfactants have stronger affinity with polyelectrolyte hydrophobes comparing with hydrogenated surfactants. The hydrophobic association of FMPAANa with a cationic surfactant (CTAB) and a fluorinated nonionic surfactant (FC171) is much stronger than with a nonionic surfactant (NP7. 5) and an anionic surfactant (FC143). Further investigation of the effects of temperature on solution properties shows that the dissociation energy E_m is correlated to the strength of the aggregated junctions.     

The Hofmeister series effect in adsorption of cationic surfactants--theoretical description and experimental results

Interfacial properties of cationic surfactants show strong dependence on the type of surfactant counterion or on the type of anion of a salt added to the surfactant solution. In the paper, the models of ionic surfactant adsorption that can take into account ionic specific effects are reviewed. Model of ionic surfactant adsorption based on the assumption that the surfactant ions and counterions undergo nonequivalent adsorption within the Stern layer was selected to describe experimental surface tension isotherms of aqueous solutions of a number of cationic surfactants. The experimental isotherms for: n-alkyl trimethylammonium cationic surfactants, namely: C(16)TABr (CTABr or CTAB), C(16)TACl, C(16)TAHSO(4), C(10)TABr and C(12)TABr as well as decyl- and dodecylpyridinium salts with and without various electrolyte anions as Cl(-), Br(-), F(-), I(-), NO(3)(-), ClO(4)(-) and CH(3)COO(-) were described in terms of the model and a good agreement between the theory and experiment was obtained for a wide range of surfactants and added electrolyte concentrations. A very pronounced Hofmeister effect in dependence of surface tension of cationic surfactants on the type of anion was found. Analysing this dependence in terms of the proposed model of ionic surfactant adsorption, strong correlation between "anion surface activity" (the model parameter accounting for ion penetration into the Stern layer), and the ion polarizability was obtained. That suggests that the mechanism related to the dispersive interaction of polarized ion with electric field at interface is responsible for Hofmeister series effects in surface activity of cationic surfactants. The same mechanism was proposed recently to explain the dependence of surface tension increase with electrolyte concentration on anion and cation type.     

双子表面活性剂溶液的表面活性的研究

研究了阳离子型双子表面活性剂,二溴化-N,N'-二(二甲基烷基)乙(已)二铵,以及它们与阴离子表面活性剂十二烷基苯磺酸钠(SDBS)复配体系的表面活性,测定上述体系的平衡态表面张力。结果表明：双子表面活性剂的表面活性大大高于十二烷基三甲溴化铵(DTAB);对于两种双子表面活性剂,其表面活性和表面张力时间效应受其联接基团的影响远大于其烷基链的影响。双子表面活性剂与SDAB复配,其协同效应不如DTAB。动表面张力测定得到它们的各种参：t~i,t~m,γ~m,t*和n等值,结果表面双子表面活性剂的瞬时活性也高于DTAB。     

Comparative study on the interaction of DNA with three different kinds of surfactants and the formation of multilayer films

The interactions between double-stranded DNA (dsDNA) and three different kinds of surfactants, i.e., cationic, anionic, and nonionic surfactants, were investigated by cyclic voltammetry, electrochemical impedance spectroscopy and UV-vis spectroscopy. Multilayer films composed of DNA and surfactants were prepared at gold electrode by electrostatic or hydrophobic interactions. It was found that the cationic surfactant, CTAB, can bind to DNA by electrostatic interaction, and the electron transfer resistance of CTAB-DNA complex film increases first and then decreases with CTAB concentration. The anionic surfactant, LAS, can bind to DNA but by hydrophobic interaction, and the electron transfer resistance of the complex film keeps decreasing with LAS concentration. Nonionic surfactants can also directly bind to DNA by hydrophobic interaction. All the three different kinds of surfactants can form multilayer films with DNA on the electrode surface. The chemical structure of DNA keeps unchanged during interacting with these surfactants. The binding modes of DNA with these three different kinds of surfactants were also deduced.