Dynamically coated capillaries improve the identification power of capillary zone electrophoresis for basic drugs in toxicological analysis

In systematic toxicological analysis (STA), analytical methods should have a high identification power. This can be suitably expressed by parameters such as mean list length (MLL) or discriminating power (DP). The reproducibility of a method has a great impact on its identification power, and should be as high as possible. In this study, two separation methods based on capillary zone electrophoresis (CZE) were evaluated towards STA applications. Besides a normal phosphate buffer, the commercially available buffer CElixir was used, which is a double-layer dynamic coating system. The coating stabilizes the endoosmotic flow, is independent of the pH, and is claimed to be more reproducible and faster at low pH than with normal buffers. A test set of 73 basic pharmaceutical compounds was analyzed by the two CZE methods. The total analysis time, including rinsing steps, was 8 min when the coating was used and 18 min without the coating. Effective mobilities were calculated and the reproducibilities were a factor of 2 better when the coating was used (between-days SD 0.020 and 0.040 m2/V s with and without the coating, respectively). MLL and DP were calculated for the two CZE methods and for combinations with standardized liquid and gas chromatography systems. CZE with CElixir coating clearly has a high potential for STA applications, as it was shown to have a higher identification power and shorter analysis times than normal CZE.     

Characterization of the methanolic extract of hops using capillary electrophoresis-electrospray ionization-mass spectrometry

Hops are used almost exclusively for bitterness and flavor by brewers. We propose the first analytical application of CZE coupled to ESI-MS for the separation and structural elucidation of organic compounds in the methanolic extracts of hops, and different extraction procedures of the plant material have been carried out. The proposed method permits the identification of hop polyphenols (flavonoids glycosides and chalcones), bitter acids (alpha-acids and beta-acids), and their oxidation products. The optimization of CZE parameters (pH, concentration, and type of buffer) and ESI-MS parameters (nature and flow rate of the sheath liquid, nebulizer pressure, drying gas flow rate, temperature, and compound stability) have permitted the development of a rapid, simple, direct, and straightforward CZE-ESI-MS method for the identification of components of methanolic extracts from different hops used in the brewing process.     

Fractionation of polyphenols in hawthorn into polymeric procyanidins, phenolic acids and flavonoids prior to high-performance liquid chromatographic analysis

Polymeric procyanidins, phenolic carboxylic acids and flavonoids of hawthorn (Crataegus laevigata) were fractionated prior to HPLC analysis using column chromatography and solid-phase extraction (SPE). The flavonoid fraction also contained (-)-epicatechin. The three groups of phenolics, each with clearly different UV spectra, were examined by means of high-performance liquid chromatography-diode array detection (HPLC-DAD) analysis. The average repeatability of the method (RSD) was in the range of 8-13% for chlorogenic acid, (-)-epicatechin and hyperoside. The polymeric procyanidins of hawthorn flowers consisted mainly of (-)-epicatechin subunits, and their mean degree of polymerization (DP) was 22.2. The HPLC methods developed can be used for the qualitative and quantitative analysis of different phenolic compounds in hawthorn plant material and their extracts.     

Characterization of polyethylene glycols and polypropylene glycols by capillary zone electrophoresis and micellar electrokinetic chromatography

Methods based on capillary zone electrophoresis (CZE) and micellar electrokinetic chromatography (MEKC) have been developed and optimized for the separation of polyethylene glycols (PEGs) and polypropylene glycols (PPGs). To provide for charge and detectability both types of polymeric compounds were derivatized with phthalic anhydride (PhAH) or 1,2,4-benzenetricarboxylic anhydride (BTA) before the separation. Derivatization with BTA yielded more complex electropherograms, due to the occurrence of different isomeric reaction products for every PEG or PPG species. Effective mobilities of the PhAH derivatives were related to the number of monomer units in the polymers in a straightforward way. The CZE method could also be used to determine the monomer-number distribution of random and block PEG-PPG copolymers. For an MEKC analysis the PEGs and PPGs were derivatized with phenyl isocyanate. Oligomers of PEGs could be separated up to molecular masses of 5,000, while for the more hydrophobic PPGs oligomeric separation was only accomplished for molecular masses of up to 1,500. Due to a strongly different separation mechanism for the PEG and PPG derivatives in the MEKC system. a complete group separation of the two types of polymer molecules could be obtained.     

Chiral Separation by Capillary Zone Electrophoresis Used Cyclodextrins and Their Derivatives as Chiral Selector

Capillary zone electrophoresis (CZE) is a very pronising analytical technique for the optical isomer resolution of the compounds studied. The drawbacks of the techniques such as HPLC [1] were sophisticated stationary phases and/or the relatively high quantity of the chiral agent in the mobile phase, which do not exist in CZE. The capillary electrophoresis (CE) method can offer advantages on lower consumption of analyte and background electrolyte (BGE), shorter analysis time, and higher efficiencies [2-3]     

CZE separation of strawberry anthocyanins with acidic buffer and comparison with HPLC

Anthocyanins, the major colourants of strawberries, are polar pigments that are positively charged at low pH. Herein, we have assessed a new analytical method for the separation of anthocyanins using CZE. Acidic buffer solutions (pH <2) were employed in order to maintain pigments in the cation flavylium form and achieve high molar absorptivity at 510 nm. These spectral properties enabled us to identify strawberry anthocyanins in a preliminary stage by detection in the visible range, although the method was optimised at 280 nm to obtain the best S/N. The effects of buffer composition highlighted the necessity of adding an organic modifier to the running buffer to obtain a suitable separation. The electrophoretic method permitted the separation of the three main anthocyanins of strawberry extracts, namely pelargonidin 3-glucoside (Pg-glu), pelargonidin 3-rutinoside and cyanidin 3-glucoside. The electrophoretic results, expressed as retention time and separation efficiency of the major anthocyanin (Pg-glu), were compared to those achieved in HPLC, the analytical technique traditionally used for the investigation of anthocyanins in vegetable matrix. The content of Pg-glu in strawberries (cv. Camarosa), calculated with HPCE and HPLC methods, resulted respectively in 11.41 mg/L and 11.37 mg/L.     

Comparison of gas chromatography-mass spectrometry and capillary electrophoresis in analysis of phenolic compounds extracted from solid matrices with pressurized hot water

Self-constructed pressurized hot water extraction (PHWE) equipment was used in dynamic mode to extract spiked phenolic compounds (phenol, 3-methylphenol, 4-chloro-3-methylphenol and 3,4-dichlorophenol) from sea sand and soil. Phenols were analyzed by both gas chromatography-mass spectrometry (GC-MS) and capillary zone electrophoresis (CZE) to compare the techniques and to find out if CZE is a suitable tool for analysis of phenols extracted from environmental matrix. Good recoveries of phenols spiked in sea sand were achieved at all PHWE temperatures (50, 100, 200, 300 C). GC-MS studies showed that phenols were selectively extracted from soil at 50 C but various other compounds (e.g. polyaromatic hydrocarbons) were extracted along with the phenols at 300 degrees C. In the case of CZE, phenols extracted from the soil, at 300 C were separated with good resolution at pH 9.7, and co-extracted compounds did not interfere with the analysis. The analytical values obtained by GC-MS and CZE were generally of similar magnitude.     

Correlation of capillary zone electrophoresis with continuous free-flow zone electrophoresis: application to the analysis and purification of synthetic growth hormone releasing peptide

Two carrier-free electrophoretic separation methods, capillary zone electrophoresis (CZE) and continuous free-flow zone electrophoresis (FFZE), have been applied to both microanalysis at the nanogram level and preparative fractionation, with a throughput of 30 mg/h, of synthetic growth hormone releasing peptide (GHRP). A crude product of GHRP, a hexapeptide with the sequence His-D-Trp-Ala-Trp-D-Phe-Lys-NH2, synthesized by the solid phase methodology, was desalted and analyzed by CZE. Based on the results of analytical CZE the separation was converted into a preparative purification procedure by continuous FFZE, employing the same separation medium (0.5 mol/L acetic acid, pH 2.6). The purifity of peptide fractions obtained by FFZE was reevaluated by CZE. The combination of these two techniques proved to be a valuable tool for both peptide analysis and peptide purification. A close correlation of CZE and FFZE, resulting from the fact that both methods are based on the same separation principle (zone electrophoresis) and that both are performed in a free solution of the same composition, was confirmed. However, when transforming data from CZE to FFZE, the different electroosmotic flow, temperature and electric field intensity in the capillary and in the flow-through cell, respectively, have to be taken into account and corresponding corrections have to be made.     

Determination of molecular weight distribution of cellulose by conversion into tricarbanilate and fractionation

Two samples of cellulose (molecular weight 2.97 × 10⁵ and 1.25 × 10⁵) were transformed into carbanilates (CTC) which were then fractionated by the elution method at a constant composition of the acetone-water elution mixture with the column temperature gradually increasing from ?30°C to 30°C, and by the GPC method in acetone and tetrahydrofuran. Tetrahydrofuran appeared to be a more suitable solvent. The molecular weights of fractions obtained by the elution fractionation were determined by the light-scattering method in tetrahydrofuran. The width of fractions was determined by the GPC method (average M _w/M _n = 1.37); the [η] values and the Mark-Houwink constants (K = 5.3 × 10^-3, a = 0.84) for tetrahydrofuran at 25°C were determined. The calibration curve for the GP method was constructed by means of the fractions thus obtained; it was demonstrated that the universal calibration curve according to Benoit can also be used. It was demonstrated that the molecular weight distribution of cellulose can be conveniently determined by conversion into CTC followed either by the elution fractionation (for preparative purposes) or by fractionation by the GPC method (for analytical purposes).     

Capillary electrophoretic separation of phenolic diterpenes from rosemary

The major phenolic diterpenes responsible for the antioxidant properties of rosemary extracts, namely carnosol and carnosic acid, were separated by capillary zone electrophoresis (CZE) using a 56 cm long uncoated fused-silica capillary and a 50 mM disodium tetraborate buffer of pH 10.1. The effect of the buffer type, pH and concentration, and the capillary length on the separation, was studied. Carnosol and carnosic acid were identified in the electrophoregrams of rosemary extracts through their migration times and UV spectra obtained by CZE analysis of pure compounds isolated from a rosemary extract by HPLC fractionation. The CZE method had good reproducibility (relative standard deviation less than 5%) and was applied to compare the contents of carnosol and carnosic acid in solid and oil-dispersed commercial extracts of rosemary and in rosemary leaves. The separation of carnosol and carnosic acid was accomplished in less than 11 min.     

Capillary electrophoresis and ultra-high-performance liquid chromatography methods in clinical monitoring of creatinine in human urine: A comparative study

Creatinine is an important diagnostic marker and is also used as a standardization tool for the quantitative evaluation of exogenous/endogenous substances in urine. This study aimed at evaluating and comparing three analytical approaches, based on hyphenations of different separation [two-dimensional capillary isotachophoresis (CITP–CITP), capillary zone electrophoresis (CZE), ultra-high-performance liquid chromatography (UHPLC)] and detection [conductivity (CD), ultraviolet (UV), tandem mass spectrometry (MS/MS)] techniques, for their ability to provide reliable clinical data along with their suitability for the routine clinical use (cost, simplicity, sample throughput). The developed UHPLC–MS/MS, CITP–CITP–CD, and CZE–UV methods were characterized by favorable performance parameters, such as linearity (r ˃ 0.99), precision (relative standard deviation, 0.22–2.97% for the creatinine position in analytical profiles), and recovery (87.1–115.1%). Clinical data, obtained from the analysis of 24 human urine samples by a reference enzymatic method, were comparable with those obtained by the tested methods (Passing–Bablok regression and Bland–Altman analysis), approving their usefulness for the routine clinical use. In this context, the UHPLC–MS/MS method provides benefits of enhanced orthogonality/accuracy and high sample throughput (threefold shorter total analysis times than the CE methods), whereas advantages of the CE methods for routine labs are simplicity and low cost of both the instrumentation and measurements.     

Interlaboratory reproducibility of mobility parameters in capillary electrophoresis for substance identification in systematic toxicological analysis

An interlaboratory pilot study was performed to determine the reproducibility of mobility parameters in capillary zone electrophoresis (CZE) and micellar electrokinetic chromatography (MEKC). The study was performed by an intended small number of laboratories (three) that used different brands of instruments (two). The effective mobility was corrected using standards by a method that was recently introduced to obtain a more reproducible migration parameter. A test set of 20 acidic test compounds and 5 reference compounds were analyzed during five days in each laboratory using CZE and MEKC. Buffers used consisted of 90 mM borate set at pH 8.4 (CZE) and 20 mM phosphate, 50 mM sodium dodecyl sulfate set at pH 7.5 (MEKC). Analyses were carried out using fused-silica capillaries at an electric field strength of either 52.6 kV/m or 37.5 kV/m. The interlaboratory reproducibility (mean RSD) of the effective mobility was 3.0% for CZE and 6.7% for MEKC. After applying the correction method, these values became 3.0% for CZE and 3.3% for MEKC, which is adequate for systematic toxicological analysis (STA) applications. A significant improvement of reproducibility for the calculated corrected effective mobility mu(eff)c was observed when variations are high. Therefore, it is recommended to use the correction method in interlaboratory situations, especially when instruments and capillaries from different manufacturers are used.     

Application of Capillary and Free-Flow Zone Electrophoresis for Analysis and Purification of Antimicrobial β-Alanyl-Tyrosine from Hemolymph of Fleshfly Neobellieria bullata

The problem of a growing resistance of bacteria and other microorganisms to conventional antibiotics gave rise to a search for new potent antimicrobial agents. Insect antimicrobial peptides (AMPs) seem to be promising novel potential anti-infective therapeutics. The dipeptide β-alanyl-tyrosine (β-Ala-Tyr) is one of the endogenous insect toxins exhibiting antibacterial activity against both Gram-negative and Gram-positive bacteria. Prior to testing its other antimicrobial activities, it has to be prepared in a pure form. In this study, we have developed a capillary zone electrophoresis (CZE) method for analysis of β-Ala-Tyr isolated from the extract of the hemolymph of larvae of the fleshfly Neobellieria bullata by reversed-phase high-performance liquid chromatography (RP-HPLC). Based on our previously described correlation between CZE and free-flow zone electrophoresis (FFZE), analytical CZE separation of β-Ala-Tyr and its admixtures have been converted into preparative purification of β-Ala-Tyr by FFZE with preparative capacity of 45.5 mg per hour. The high purity degree of the β-Ala-Tyr obtained by FFZE fractionation was confirmed by its subsequent CZE analysis.     

Capillary electrophoresis-electrospray ionization-mass spectrometry method to determine the phenolic fraction of extra-virgin olive oil

We describe the first analytical method involving SPE and CZE coupled to ESI-IT MS (CZE-ESI-MS) used to identify and characterize phenolic compounds in olive oil samples. The SPE, CZE and ESI-MS parameters were optimized in order to maximize the number of phenolic compounds detected and the sensitivity of their determination. To this end we have devised a detailed method to find the best conditions for CE separation and the detection by MS of the phenolic compounds present in olive oil using a methanol-water extract of Picual extra-virgin olive oil (VOO). Electrophoretic separation was carried out using an aqueous CE buffer system consisting of 60 mM NH(4)OAc at pH 9.5 with 5% of 2-propanol, a sheath liquid containing 2-propanol/water 60:40 v/v and 0.1% v/v triethylamine. This method offers to the analyst the chance to study important phenolic compounds such as phenolic alcohols (tyrosol (TY), hydroxytyrosol (HYTY) and 2-(4-hydroxyphenyl)ethyl acetate), lignans ((+)-pinoresinol and (+)-1-acetoxypinoresinol), complex phenols (ligstroside aglycon (Lig Agl), oleuropein aglycon, their respective decarboxylated derivatives and several isomeric forms of these (dialdehydic form of oleuropein aglycon, dialdehydic form of ligstroside aglycon, dialdehydic form of decarboxymethyl elenolic acid linked to HYTY, dialdehydic form of decarboxymethyl elenolic acid linked to TY) and 10-hydroxy-oleuropein aglycon) and one other phenolic compound (elenolic acid) in extra-VOO by using a simple SPE before CE-ESI-MS analysis.     

Analysis of ion-association reaction in aqueous solution and its utilization by capillary zone electrophoresis.

Electrophoretic migration of analytes in capillary zone electrophoresis (CZE) reflects the dissolved status of analytes in solution, and the electrophoretic mobility is controlled to develop the resolution among analytes by adding a "modifier" to the migrating solution. Such addition of modifier is essentially the utilization of molecular interactions. Precise measurement of electrophoretic mobility by CZE allows analyzing molecular interactions, and CZE apparatus is very useful for physicochemical measurements. This review focuses on the advantages on using CZE to analyze equilibrium reaction; the capillary electrophoretic method and mathematical analyses that apply acid dissociation and complex formation reactions are also validated. Ion association reactions are deeply related to analytical chemistry and separation science, and CZE has been used for the investigation of ion-ion interactions. Various types of interactions have been clarified through the CZE measurements: contributions of hydrophobicity, probability, and aromatic-aromatic interaction were quantitatively evaluated. Ion association reaction in aqueous solution also elucidates the stepwise reactions of liquid-liquid distribution of ion associates. Development and applications of ion association reaction in CZE analysis are also introduced.     

Analytical strategies for the quality assessment of recycled high-impact polystyrene: a combination of thermal analysis, vibrational spectroscopy, and chromatography

Various analytical techniques (thermal analysis, vibrational spectroscopy, and chromatographic analysis) were used in order to monitor the changes in polymeric properties of recycled high-impact polystyrene (HIPS) throughout mechanical recycling processes. Three key quality properties were defined and analysed; these were the degree of mixing (composition), the degree of degradation, and the presence of low molecular weight compounds. Polymeric contaminations of polyethylene (PE) and polypropylene (PP) were detected in some samples using differential scanning calorimetry (DSC). Vibrational spectroscopy showed the presence of oxidised parts of the polymeric chain and gave also an assessment of the microstructure of the polybutadiene phase in HIPS. The presence of low molecular weight compounds in the HIPS samples was demonstrated using microwave-assisted extraction followed by gas chromatography-mass spectrometry (GC-MS). Several volatile organic compounds (VOCs), residues from the polymerisation, additives, and contaminations were detected in the polymeric materials. Styrene was identified already in virgin HIPS; in addition, benzaldehyde, α-methylbenzenaldehyde, and acetophenone were detected in recycled HIPS. The presence of oxygenated derivates of styrene may be attributed to the oxidation of polystyrene (PS). Several styrene dimers were found in virgin and recycled HIPS; these are produced during polymerisation of styrene and retained in the polymeric matrix as polymerisation residues. The amount of these dimers was highest in virgin HIPS, which indicated that emission of these compounds may have occurred during the first life-time of the products. This paper demonstrates that a combination of different analytical strategies is necessary to obtain a detailed understanding of the quality of recycled HIPS.     

毛细管区带电泳法快速测定复方布洛芬片的有效成分

 研究了用毛细管区带电泳法快速测定复方布洛芬片中布洛芬和伪麻黄碱含量的方法。在０．０２５ｍｏｌ／Ｌ的磷酸盐缓冲液（ｐＨ８．１）中，上述两组分可在３ｍｉｎ内得以完全分离，用紫外检测器在２１０ｎｍ处检测，并以外标法定量。１１次测定含有９．５ｍｇ／Ｌ盐酸伪麻黄碱和６６．７ｍｇ／Ｌ布洛芬的试样溶液，相对标准偏差为２．９％（伪麻黄碱）和１．９％（布洛芬），回收率为１０３．１％（伪麻黄碱）和９７．６％（布洛芬）。应用毛细管区带电泳法测定复方布洛芬片剂的含量，所得结果与ＨＰＬＣ法一致。     

Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-based pigments synthesized by a new proteic sol–gel method

Alumina-based pigments were synthesized by the proteic sol–gel method. In this method, coconut water is employed as polymeric agent instead of the conventional alkoxide precursors. To this study, three common chromophore metallic ions (Mn³⁺, Co³⁺, and Cr³⁺) were chosen in order to verify the method efficiency. Differential thermal analysis (DTA), thermogravimetry (TG), and XRD techniques were used to characterize the synthesis process. The colorimetric characterization of the produced pigments was done according to the CIE-L*a*b* 1976 norm which is recommended by the CIE (International Commission on Illumination). The synthesized pigments presented intense and uniform colors in accordance to the literature results for each chromophore ion. The produced pigments also presented agglomerated with an average grain size of 180 nm when calcined at 800 °C.     

Enantioselective column coupled electrophoresis employing large bore capillaries hyphenated with tandem mass spectrometry for ultra‐trace determination of chiral compounds in complex real samples

A new multidimensional analytical approach for the ultra‐trace determination of target chiral compounds in unpretreated complex real samples was developed in this work. The proposed analytical system provided high orthogonality due to on‐line combination of three different methods (separation mechanisms), i.e. (1) isotachophoresis (ITP), (2) chiral capillary zone electrophoresis (chiral CZE), and (3) triple quadrupole mass spectrometry (QqQ MS). The ITP step, performed in a large bore capillary (800 μm), was utilized for the effective sample pretreatment (preconcentration and matrix clean‐up) in a large injection volume (1–10 μL) enabling to obtain as low as ca. 80 pg/mL limits of detection for the target enantiomers in urine matrices. In the chiral CZE step, the different chiral selectors (neutral, ionizable, and permanently charged cyclodextrins) and buffer systems were tested in terms of enantioselectivity and influence on the MS detection response. The performance parameters of the optimized ITP – chiral CZE‐QqQ MS method were evaluated according to the FDA guidance for bioanalytical method validation. Successful validation and application (enantioselective monitoring of renally eliminated pheniramine and its metabolite in human urine) highlighted great potential of this chiral approach in advanced enantioselective biomedical applications.