Interfacial properties of amiodarone: the stabilizing effect of phosphate anions

Amiodarone, a drug used in heart therapy, is poorly soluble in water at room temperature, but forms transparent phases much more concentrated than the critical micellar concentration (CMC), when crystals are heated (above 60 degrees C) in presence of water and cooled down to room temperature. These pseudosolutions were supposed to be made of a complex system of micelles. In order to better understand the effects of pH and ion species on the supramolecular organization of amiodarone, interfacial pressure measurements were performed at the air/water interface on a Langmuir trough. Monolayers spread from chloroformic solutions over non bufferered subphases were insoluble at basic pH (NaOH, pH 10) but soluble at acidic pH (HCl, pH 4). However, a higher ionic strength obtained by adding NaCl (0.15 N) or NaH(2)PO(4) (0.15 N) to the subphase stopped the amiodarone solubilization. On an acidic phosphate subphase (NaH(2)PO(4), pH 4.4, 0.15 N), abnormally high surface pressures (>1 mN/m) were measured for high molecular areas (80-200 ?(2)/molecule) suggesting a supramolecular organization of the surface film. Insoluble monolayers were also obtained when the amiodarone supramolecular pseudosolution was spread on neutral (NaH(2)PO(4), pH 6.25, 0.15 N) or acidic (NaH(2)PO(4), pH 4.4, 0.15 N) subphases. However, a great instability on basic subphase (phosphate buffer pH 8.8) indicated the breakage of the supramolecular structure during spreading. These results are discussed taking into account the amiodarone state of ionization and the electrostatic interactions with counterions. Combining the use of phosphate counterions and that of acidic pH opens new perspectives in the optimization of amiodarone intravenous formulations.     

Protein-lipid interactions at the air/water interface

Surface pressure measurements and external reflection FTIR spectroscopy have been used to probe protein-lipid interactions at the air/water interface. Spread monomolecular layers of stearic acid and phosphocholine were prepared and held at different compressed phase states prior to the introduction of protein to the buffered subphase. Contrasting interfacial behaviour of the proteins, albumin and lysozyme, was observed and revealed the role of both electrostatic and hydrophobic interactions in protein adsorption. The rate of adsorption of lysozyme to the air/water interface increased dramatically in the presence of stearic acid, due to strong electrostatic interactions between the negatively charged stearic acid head group and lysozyme, whose net charge at pH 7 is positive. Introduction of albumin to the subphase resulted in solubilisation of the stearic acid via the formation of an albumin-stearic acid complex and subsequent adsorption of albumin. This observation held for both human and bovine serum albumin. Protein adsorption to a PC layer held at low surface pressure revealed adsorption rates similar to adsorption to the bare air/water interface and suggested very little interaction between the protein and the lipid. For PC layers in their compressed phase state some adsorption of protein occurred after long adsorption times. Structural changes of both lysozyme and albumin were observed during adsorption, but these were dramatically reduced in the presence of a lipid layer compared to that of adsorption to the pure air/water interface.     

Study of pH-sensitive copolymer/phospholipid complexes using the langmuir balance technique: effect of anchoring sequence and copolymer molecular weight

The behavior of three copolymers of N-isopropylacrylamide (NIPAM), methacrylic acid (MAA), and hydrophobic moiety was studied at phospholipid monolayer/subphase interfaces. The hydrophobic moieties, N-terminal dioctadecylamine (DODA) and random octadecylacrylate (ODA), were used as anchoring groups. The interactions between a 1,2-distearoyl-sn-glycero-3-phosphatidylcholine (DSPC) monolayer and the copolymers were studied using the Langmuir balance technique. The effect of subphase pH, distribution of anchors along the copolymer chain, and copolymer molecular weight on the nature of the interactions between the copolymer chains and the DSPC monolayer were investigated. A first-order kinetics model was used to analyze the copolymers adsorption at the DSPC monolayer/subphase interface and allowed the interaction area between the copolymer chains and the DSPC monolayer, A(x), to be determined. The interaction area appears to depend on the subphase pH and the copolymer molecular weight. On decreasing pH, the interaction area of high molecular weight copolymers increases significantly; this is consistent with the copolymer chain phase transition from an extended coil to a collapsed globule while pH is lowered. In the latter conformation, strong hydrophobic attractive interactions between the copolymer chains and the hydrophobic part of the DSPC monolayer favor the copolymer intercalation, which could eventually provoke the phospholipidic layer destabilization or rupture.     

Surface-induced unfolding of human lactoferrin

We have determined the structural conformations of human lactoferrin adsorbed at the air/water interface by neutron reflectivity (NR) and its solution structure by small angle neutron scattering (SANS). The neutron reflectivity measurements revealed a strong structural unfolding of the molecule when adsorbed at the interface from a pH 7 phosphate buffer solution (PBS with a total ionic strength at 4.5 mM) over a wide concentration range. Two distinct regions, a top dense layer of 15-20 angstroms on the air side and a bottom diffuse layer of some 50 angstroms into the aqueous subphase, characterized the unfolded interfacial layer. At a concentration around 1 g dm(-3), close to the physiological concentration of lactoferrin in biological fluids, the adsorbed amount was 5.5 x 10(-8) mol m(-2) in the absence of NaCl, but the addition of 0.3 M NaCl reduced protein adsorption to 3.5 x 10(-8) mol m(-2). Although the polypeptide distributions at the interface remained similar, quantitative analysis showed that the addition of NaCl reduced the layer thickness. Parallel measurements of lactoferrin adsorption in D2O instead of null reflecting water confirmed the unfolded structure at the interface. Furthermore, the D2O data indicated that the polypeptide in the top layer was predominantly protruded out of water, consistent with it being hydrophobic. In contrast, the scattering intensity profiles from SANS were well described by a cylindrical model with a diameter of 47 angstroms and a length of 105 angstroms in the presence of 0.3 M NaCl, indicating a retention of the globular framework in the bulk solution. In the absence of NaCl but with the same amount of phosphate buffer, the length of the cylinder increased to some 190 angstroms and the diameter remained constant. The length increase is indicative of changes in distance and orientation between the bilobal monomers due to the change in charge interactions. The results thus demonstrate that the surface structural unfolding was caused by the exposure of the protein molecule to the unsymmetrical energetic balance following surface adsorption.     

Ultrathin films of semiconducting polymers on water

Ultrathin films of polythiophene derivatives spread on water were studied by means of synchrotron radiation, using grazing incidence diffraction and (specular) reflectometry to obtain the molecular orientation in the films. The semicrystalline films were anisotropic, showing a strong tendency of orienting the crystalline alpha-axis perpendicularly to the water subphase. The crystalline domains extend essentially through the entire sample thickness, found to be 10-15 nm. A large expansion of the unit cell alpha-parameter was seen upon doping the films in situ. The reflectometry data were well-fitted by a model with a sinusoidal density variation being damped toward the water subphase. This indicates that the crystalline order was most developed at the polymer-air interface and deteriorated down toward the water, possibly due to the hydrophobicity of the alkyl side chains.     

Amphiphilic siloxane phosphonate macromolecule monolayers at the air/water interface: effects of structure and temperature

A comprehensive study is reported of Langmuir-Blodgett (LB) films (spread at the air/water interface using the Langmuir balance technique) composed of surface active, nonionic, and OH-free amphiphilic siloxane phosphonate ester macromolecules. Analysis is made on three molecular structures in the form of linear polymer poly(diethylphosphono-benzyl-alphabeta-ethyl methylsiloxane) (PPEMS), cyclic oligomer methylphosphonobenzyl-alphabeta-ethyl cyclosiloxane (MPECS), and copolymer poly(PEMS-co-DMS). The surface pressure-surface area (pi -A) isotherms of homopolymer at 3-40 degrees C show a clear temperature-induced phase transition (plateaus at pit approximately 17-19 mN/m) below 10 degrees C. The magnitude of the transition substantially increases upon lowering the temperature (partial differential DeltaAt/ partial differential T approximately -0.1 nm2 unit(-1) deg(-1) and partial differential pi t / partial differential T approximately -0.25 mN m(-1) deg(-1)). The positive entropy and enthalpy gain infers that strong coupling with the subphase and excess hydration attributed to hydrogen bonding between the P=O bond and the subphase prevails at low temperatures. The cyclic oligomer MPECS forms a condensed monolayer at the air/water interface that does not display a similar transition in the experimental temperature range. The temperature sensitivity of MPECS film is observed only in the collapsed region. The nature of the interaction with the subphase is similar for MPECS and PPEMS, indicating that the size and thermal mobility are the controlling factors in these processes. The elasticity plot reveals two distinct states (above and below transition). This observation is supported by BAM images that show irregular spiral structures below 10 degrees C. The transition occurring in the copolymer at 20 degrees C is due to relaxation of the PDMS component. The two maxima shown in the elasticity plot indicate additive fractions of PPEMS and PDMS. The surface areas of these macromolecules in the relaxed (1.48 nm2/unit) and packed (0.45 nm2/unit) forms obtained by PM3 modeling agree well with the experimental data and seem to indicate that the siloxane chain is being lifted off the subphase by the hydrophobic phenylic part of the molecule.     

Annexin A1 interaction with a zwitterionic phospholipid monolayer: a fluorescence microscopy study

We present the results of a fluorescence microscopy study of the interaction of annexin A1 with dipalmitoylphosphatidylcholine (DPPC) monolayers as a function of the lipid monolayer phase and the pH of the aqueous subphase. We show that annexin A1-DPPC interaction depends strongly on the domain structure of the DPPC monolayer and only weakly on the subphase pH. Annexin A1 is found to be line active, with preferential adsorption at phase boundaries. Also, annexin A1 is found to form networks in the presence of a domain structure in the monolayer. Our results point toward an important contribution of the unique N-terminal domain to the organization of the protein at the interface.     

Structure-function relations in self-assembled C18- and C20-sphingosines monolayers at gas/water interfaces

Synchrotron X-ray studies and surface pressure versus molecular area (pi-A) isotherms of C18- and C20-sphingosines spread at air/water interfaces reveal unique interfacial properties with considerable differences between the two single hydrocarbon chain amino-alcohols. C20-sphingosine forms a crystalline monolayer with structural characteristics that are dominated by hydrogen bonding in the headgroup (common to its sphingolipid derivatives), whereas its natural counterpart C18-sphingosine forms a disordered liquidlike metastable monolayer and has to be spread in excess with a floating reservoir on the water surface to compensate for the high dissolution rate of molecules into the water subphase. The marginal affinity of C18-sphingosine to reside at the interface, the microcrystallization at very low densities, the corrugated monolayers it forms, and the strong interaction with the water surface are consistent with the roles that sphingolipids play in the life cycle of eukaryotic cells and as the building blocks of specialized membranes.     

Study of adsorption and penetration of E2(279-298) peptide into Langmuir phospholipid monolayers

The peptide corresponding to the sequence (279-298) of the Hepatitis G virus (HGV/GBV-C) E2 protein was synthesized, and surface activity measurements, pi-A compression isotherms, and penetration of E2(279-298) into phospholipid monolayers spread at the air-water interface were carried out on water and phosphate buffer subphases. The results obtained indicated that the pure E2(279-298) Langmuir monolayer exhibited a looser packing on saline-buffered than on pure water subphase and suggest that the increase in subphase ionic strength stabilizes the peptide monolayer. To better understand the topography of the monolayer, Brewster angle microscopy (BAM) images of pure peptide monolayers were obtained. Penetration of the peptide into the pure lipid monolayers of dipalmitoylphosphatidylcholine (DPPC) and dimyristoylphosphatidylcholine (DMPC) and into mixtures of dimyristoylphosphatidylcholine/dimyristoylphosphatidylglycerol (DMPC/DMPG) at various initial surface pressures was investigated to determine the ability of these lipid monolayers to host the peptide. The higher penetration of peptide into phospholipids is attained when the monolayers are in the liquid expanded state, and the greater interaction is observed with DMPC. Furthermore, the penetration of the peptide dissolved in the subphase into these various lipid monolayers was investigated to understand the interactions between the peptide and the lipid at the air-water interface. The results obtained showed that the lipid acyl chain length is an important parameter to be taken into consideration in the study of peptide-lipid interactions.     

Influence of environmental conditions on the interfacial organisation of fengycin, a bioactive lipopeptide produced by Bacillus subtilis

The effect of the environmental conditions both on the behaviour of fengycin at the air-aqueous interface and on its interaction with DPPC was studied using surface pressure-area isotherms and AFM. The ionisation state of fengycin is at the origin of its monolayer interfacial properties. The most organised interfacial arrangement is obtained when fengycin behaves as if having zero net charge (pH 2). In a fully ionised state (pH 7.4), the organisation and the stability of fengycin monolayers depend on the ionic strength in the subphase. This can modulate the surface potential of fengycin and consequently the electrostatic repulsions inside the interfacial monolayer, as well as the lipopeptide interaction with the layer of water molecules forming the air-water interface. Intermolecular interactions of fengycin with DPPC are also strongly affected by the ionisation state of lipopeptide and the surface pressure (Pi) of the monolayer. A better miscibility between both interfacial components is observed at pH 2, while negatively charged lipopeptide molecules are segregated from the DPPC phase. A progressive desorption of fengycin from the interface is observed at pH 7.4 when Pi increases while at pH 2, fengycin desorption brutally occurs when Pi rises above Pi value of the intermediate plateau.     

Monolayers of salen derivatives as catalytic planes for alkene oxidation in water

Monolayers at the gas/water interface have been used as an adjustable catalytic system in which the molecular density may be modified. Mn(III)-salen complexes bearing perfluoroalkyl substituents have been organized as a Langmuir film on an aqueous subphase containing a urea/hydrogen peroxide adduct (UHP, the oxidant) and cinnamyl alcohol (the substrate). The catalytic activity of the monolayer for the epoxidation of the alkene dissolved in water has been demonstrated and the reaction kinetic investigated. For a constant area per molecule of catalyst, the reaction rate exhibits first-order dependence on oxidant concentration and zero-order dependence on alkene concentration, in agreement with the reaction orders reported for Mn(III)-salen-catalyzed epoxidation reactions carried out in solution. Furthermore, kinetic experiments suggest an enhanced activity of the catalysts assembled in a Langmuir film relative to that observed in bulk reaction. Finally, varying the molecular density of the catalyst at the gas/water interface highlights an important dependence of the catalytic activity of the layer with the mean molecular area. A strong increase of the catalytic properties of the monolayer was observed for a mean molecular area of 140-145 A2, an increase which was supposedly related to a modification of the Mn(III)-salen complex orientation at the interface upon compression. This hypothesis was supported by PM-IRRAS (polarization modulation infrared reflection adsorption spectroscopy) experiments performed in situ on the monolayer. Such results demonstrate that a soft and adjustable molecular system like a Langmuir film can be used to better understand the reactivity in various heterogeneous and/or pseudohomogeneous (such as those based on dendrimers) catalytic systems.     

Orientation of a monoclonal antibody adsorbed at the solid/solution interface: a combined study using atomic force microscopy and neutron reflectivity

Conformational orientations of a mouse monoclonal antibody to the beta unit of human chorionic gonadotrophin (anti-beta-hCG) at the hydrophilic silicon oxide/water interface were investigated using atomic force microscopy (AFM) and neutron reflectivity (NR). The surface structural characterization was conducted with the antibody concentration in solution ranging from 2 to 50 mg.L(-1) with the ionic strength kept at 20 mM and pH = 7.0. It was found that the antibody adopted a predominantly "flat-on" orientation, with the Fc and two Fab fragments lying flat on the surface. The AFM measurement revealed a thickness of 30-33 A of the layer formed in contact with 2 mg.L(-1) antibody in water, but, interestingly, the flat-on antibody molecules formed small nonuniform clusters equivalent to 2-15 antibody molecules. Parallel AFM scanning in air revealed even larger surface clusters, suggesting that surface drying induced further aggregation. The AFM study thus demonstrated that the interaction between protein and the hydrophilic surface is weak and indicated that surface aggregation can be driven by the attraction between neighboring protein molecules. NR measurements at the solid/water interface confirmed the flat-on layer orientation of adsorbed molecules over the entire concentration range studied. Thus, at 2 mg.L(-1), the adsorbed antibody layer was well represented by a uniform layer with a thickness of 40 A. This value is thicker than the 30-33 A observed from AFM, suggesting possible layer compression caused by the tip tapping. An increase in the antibody concentration to 10 mg.L(-1) led to increasing surface adsorption. The corresponding layer structure was well represented by a three-layer model consisting of an inner sublayer of 10 A, a middle sublayer of 30 A, and an outer sublayer of 25 A, with the protein volume fractions in each sublayer being 0.22, 0.42, and 0.10, respectively. The structural transition can be interpreted as a twisting and tilting of segments of the adsorbed molecules, driven by an electrostatic repulsion between them that increases with the surface packing density. Hindrance of antigen access to antibody binding sites, resulting from the change in surface packing, can account for the decrease in antigen binding capacity (AgBC) with increasing surface density of the antibody that is observed.     

Cd2+-induced interfacial structural changes of Langmuir-Blodgett films of stearic acid on solid substrates: a sum frequency generation study

The molecular structures and their stabilities at the outmost-layer of the Langmuir-Blodgett (LB) films of stearic acid on solid substrates have been investigated by a highly surface-sensitive spectroscopic technique, sum frequency generation (SFG), in air and in aqueous solution, using the combination of both normal and deuterated stearic acid. Peaks observed in the SFG spectra are mainly attributed to the terminal methyl group at the outmost layer of the LB films. The SFG spectra in air are virtually identical and are independent of the odd-even property and thickness (1-12) of the LB films, indicating that the even-numbered LB film changes its surface structure after passing through the interface between the water subphase and air, especially when the Cd2+ cation was included in the water subphase. Furthermore, we have demonstrated for the first time using in situ SFG measurement that the interfacial molecular structure at the LB bilayer of stearic acid on the hydrophilic substrates significantly change with immersion in the water subphase containing Cd2+ cation while such a structural change has not been observed in the water subphase without Cd2+. These results clearly indicate that a reorganization process takes place on the surface of the stearic acid bilayer induced by the Cd2+ cation. The electrostatic interaction between the carboxylate headgroup of stearic acid via the Cd2+ cation seems to play an important role in the surface reorganization process both in air and in solution.     

Two-dimensional arrays of human C-reactive protein formed on a dense aqueoys subphase underneath a lipid layer

A recently developed protein spreading technique, using a subphase of higher density than that of the injected protein solution, was combined with the lipid monolayer approach for two-dimensional crystallization experiments of human C-reactive protein (hCRP) at the air-water interface. Densely packed two-dimensional arrays of hCRP adsorbed on a stearylamine/egg yolk phosphatidylcholine lipid layer have been obtained in the pH range from 5.4 to 5.8. Correct choices of the lipid mixture and of the pH of the subphase were important for the formation of large arrays. Image analysis of transmission electron micrographs showed that the densely packed arrays do not possess crystalline order. The orientational homogeneity of the protein molecules adsorbed on the lipid layer could be used, however, to facilitate single particle averaging techniques. At a resolution of about 1.5 nm a clear handedness of the five-fold symmetric molecule becomes visible, and an asymmetric mass distribution of each subunit is revealed.     

Colloid Stabilization by an Oppositely Charged Polysaccharide: Mechanism of Interaction and Interface Studied with Synchrotron X-Rays

The liposome surface is modeled by a 2-D lipid monolayer made of behenic acid forming a negatively charged interface. The properties at the air/liquid interface were examined by pressure-area isotherms in a Langmuir trough introducing diluted chitosan solution in the subphase. X-ray reflectivity of the interface was measured in the same conditions in order to determine the layer thickness of the chitosan adsorbed on the behenic acid monolayer formed on water. Influence of pH of the subphase and molecular weight of adsorbed chitosan was investigated. All these results allow confirming that the charge and the stability of the lipid layer are controlled by the nature of the polyelectrolyte and the nature of the medium. In particular, the use of biocompatible charged polysaccharides is of interest for biomedical applications.     

TPPS和Gemini表面活性剂的复合膜及其手性的研究

研究了一种新的gemini表面活性剂(C12H24-α,ω-(C12H25N＋(CH3)2Br－)2, （简写为C12-C12-C12）和TPPS在气液界面上形成的复合膜及其手性.实验发现,单独C12-C12-C12不能在纯水表面形成稳定的单分子膜，但当亚相中存在TPPS时，可形成稳定的单分子膜.通过水平提拉法将复合膜转移到固体基板上，发现在适当的pH值条件下，TPPS可在复合膜中形成J-聚集体，并且发现，尽管Gemini表面活性剂和TPPS 都 是非手性的，TPPS的J-聚集体表现出强烈的Cotton效应.另外，gemini表面活性剂的两个正电荷中心对TPPS的J-聚集体的手性并不能表现出协同效应.     

Polymerization of a cysteinyl peptidolipid Langmuir film

The surface pressure-area isotherm of a cysteinyl peptidolipid on a pure water subphase (pH 5.8) was compared with that on a water subphase saturated with oxygen and buffered with ammonium bicarbonate (pH 7.8). A reduction of the limiting molecular area was observed for the isotherm measured on the subphase saturated with oxygen. Hysteresis in the compression-decompression cycles of the Langmuir film was also observed. Taking into consideration the chemical structure of the peptidolipid, we rationalized that the free sulfhydryl groups of the peptidolipid were oxidized in the presence of oxygen in the alkaline subphase to form intermolecular disulfide bonds at the air-water interface. The surface topography of the peptidolipid Langmuir film was observed by epi-fluorescence microscopy and the Langmuir-Blodgett film by environmental scanning electron microscopy (ESEM). The micrographs showed evidence of the polymerization of the cysteinyl peptidolipid at the air-water interface. Furthermore, the XPS spectra of the Langmuir-Blodgett films also proved the existence of disulfide bonds. The control peptidolipid C(18)-Ser-Gly-Ser-OH showed identical surface pressure-area isotherms in the presence or absence of an oxygen-saturated subphase.     

Study of the aggregation of human insulin Langmuir monolayer

The human insulin (HI) Langmuir monolayer at the air-water interface was systematically investigated in the presence and absence of Zn(II) ions in the subphase. HI samples were dissolved in acidic (pH 2) and basic (pH 9) aqueous solutions and then spread at the air-water interface. Spectroscopic data of aqueous solutions of HI show a difference in HI conformation at different pH values. Moreover, the dynamics of the insulin protein showed a dependence on the concentration of Zn(II) ions. In the absence of Zn(II) ions in the subphase, the acidic and basic solutions showed similar behavior at the air-water interface. In the presence of Zn(II) ions in the subphase, the surface pressure-area and surface potential-area isotherms suggest that HI may aggregate at the air-water interface. It was observed that increasing the concentration of Zn(II) ions in the acidic (pH 2) aqueous solution of HI led to an increase of the area at a specific surface pressure. It was also seen that the conformation of HI in the basic (pH 9) medium had a reverse effect (decrease in the surface area) with the increase of the concentration of Zn(II) ions in solution. From the compression-decompression cycles we can conclude that the aggregated HI film at air-water interface is not stable and tends to restore a monolayer of monomers. These results were confirmed from UV-vis and fluorescence spectroscopy analysis. Infrared reflection-absorption and circular dichroism spectroscopy techniques were used to determine the secondary structure and orientation changes of HI by zinc ions. Generally, the aggregation process leads to a conformation change from α-helix to β-strand and β-turn, and at the air-water interface, the aggregation process was likewise seen to induce specific orientations for HI in the acidic and basic media. A proposed surface orientation model is presented here as an explanation to the experimental data, shedding light for further research on the behavior of insulin as a Langmuir monolayer.     

Effect of water and air-water interface on the structural modification of Ni-arachidate Langmuir-Blodgett films

Nickel arachidate (NiA) Langmuir-Blodgett (LB) films have been deposited on hydrophilic Si(0 0 1) substrates by three (up-down-up) and five (up-down-up-down-up) strokes. During deposition, substrates were kept inside the water subphase for different times after each down stroke. Structural information of all the LB films have been obtained from X-ray reflectivity (XRR) studies. One and two symmetric monolayer (SML) was deposited on top of the asymmetric monolayer (AML) in three and five stokes respectively. All the preformed LB films were then used to go through the air-water interface with the same speed that was used at the time of film deposition. Structural information obtained from the XRR studies show that mainly the top layer density decreases after passing through the air-water interface but the layered structure remains the same. Information obtained from both the XRR and atomic force microscopy (AFM) studies suggest that molecules peeled from the top SML layer do not reincorporate with the LB film through tail-tail hydrophobic interaction. Our study shows that NiA LB film has better stability compared with cadmium arachidate LB film inside the water subphase without forming any out-of-plane molecular reorganization.     

Effect of metal ions on monolayer collapses

A Langmuir monolayer of stearic acid on pure water and in the presence of certain divalent metal ions such as Cd and Pb at pH approximately 6.5 of the subphase water collapses at constant area, while for other divalent ions such as Mg, Co, Zn, and Mn at the same subphase pH the monolayer collapses nearly at constant pressure. Films of stearic acid with Cd, Pb, Mn, and Co in the subphase (at pH approximately 6.5) have been transferred onto hydrophilic Si(001) using a horizontal deposition technique, just after and long after collapse. Electron density profiles obtained from X-ray reflectivity analysis show that a three-molecular-layer structure starts to form just after constant area collapse, where in the lowest molecular layer, in contact with the substrate, molecules are in asymmetric configuration, i.e., both hydrocarbon tails are on the same side of the metal-bearing headgroup that touches the substrate, while the molecules above the first layer are in symmetric conformation of the tails with respect to the headgroups. Further along collapse, when the surface pressure starts to rise again with a decrease in area, more layers with molecules in the symmetric configuration are added, but the coverage is poor. On the other hand, only bimolecular layers form after constant pressure collapse, with the lower and upper layers having molecules in asymmetric and symmetric configurations, respectively, and the upper molecular layer density increases with compression of the monolayer after collapse. A "Ries mechanism" for constant area collapse and a "folding and sliding mechanism" for constant pressure collapse have been proposed.