In situ polypyrrole polymerization enhances the photocatalytic activity of nanofibrous TiO2/SiO2 membranes

PPy@TS nanocomposite with enhanced photocatalytic capability was prepared by in situ polymerizing polypyrrole on the surface of TiO₂/SiO₂ nanofibrous membrane.     

Visible Light Photocatalytic Activity of Porphyrin Tin(IV) Sensitized TiO2 Nanoparticles for the Degradation of 4-Nitrophenol and Methyl Orange

A stable metalloporphyrin sensitized TiO₂ (Degussa P25) photocatalyst was prepared by using trans-dihydroxo[5,10,15,20-tetraphenylporphyrin]tin(IV) (SnP) as a sensitizer in a simple impregnation process. The solid diffuse reflectance ultraviolet-visible (UV-vis) spectrum of the SnP sensitized TiO₂ photocatalyst (SnP-TiO₂) indicated that there existed interaction between SnP and TiO₂. It was found that SnP-TiO₂ exhibited an enhanced visible light photocatalytic activity as compared with that over P25 for the degradation of 4-nitrophenol (4-NP) and methyl orange (MO) in aqueous solutions. The mechanism exploration showed that the degradation of MO and 4-NP experienced two different ways, that is, MO was photodegraded by reactive oxygen species and 4-NP was directly photodegraded by the excited state of SnP. Furthermore, it was found that the loading content of SnP had an important influence on the photocatalytic activity of TiO₂. The maximum photocatalytic efficiency was achieved when the contents of SnP were 25 mg and 30 mg per gram TiO₂ for MO and 4-NP, respectively. Importantly, SnP-TiO₂ was particularly stable and the photocatalytic activity was hardly decreased after being recycled seven times in the presence of oxygen, which could be attributed to the easy reductive regeneration of SnP.     

The preparation,characterization, photoelectrochemical and photocatalytic properties of lanthanide metal-ion-doped TiO2 nanoparticles

Lanthanide metal-ion-doped TiO₂ nanoparticles were prepared with hydrothermal method and characterized with X-ray diffraction (XRD), transmission electron microscopy (TEM), inductively coupled plasma (ICP) and fluorescence spectrum. The results showed that a small part of metal ions entered into the lattice of TiO₂ and others adsorbed on the surface of TiO₂. The photoelectrochemical and photocatalytic properties of these lanthanide metal-ion-doped TiO₂ nanoparticles were investigated and the results showed that the photoresponse of Eu³⁺-, La³⁺-, Nd³⁺- and Pr³⁺-doped TiO₂ electrodes were much larger and that of Sm³⁺-doped TiO₂ electrode was a little larger than that of undoped TiO₂ electrode, indicating that the photogenerated carriers were separated more efficiently in Eu³⁺-, La³⁺-, Nd³⁺- and Pr³⁺-doped TiO₂ nanoparticles than in undoped TiO₂ nanoparticles. The photocatalytic degradation of rhodamine B (RB) was conducted in the suspension of lanthanide metal-ion-doped TiO₂ nanoparticles, and its first-order reaction rate constant (k) and average initial rate (r_ini) were significantly higher in the presence of Eu³⁺-, La³⁺-, Nd³⁺- and Pr³⁺-doped TiO₂ nanoparticles than those in the presence of undoped TiO₂ nanoparticles. The enhanced photocatalytic degradation rate of RB in the presence of Eu³⁺-, La³⁺-, Nd³⁺- and Pr³⁺-doped TiO₂ nanoparticles is attributed to increased charge separation in these systems. The effect of the content of La³⁺ on the reaction parameters (k and r_ini) was also investigated and the result showed that there was an optimal value (ca. 0.5%) of the content of La³⁺ to make the rate constant (k) and average initial rate (r_ini) reach the maxima.     

Photocatalytic degradation of triazine dyes over N-doped TiO2 in solar radiation

Photocatalytic degradation of the reactive triazine dyes Reactive Yellow 84 (RY 84), Reactive Red 120 (RR 120), and Reactive Blue 160 (RB 160) on anatase phase N-doped TiO₂ in the presence of natural sunlight has been carried out in this work. The effect of experimental parameters like initial pH and concentration of dye solution and dosage of the catalyst on photocatalytic degradation have also been investigated. Adsorption of dyes on N-doped TiO₂ was studied prior to photocatalytic studies. The studies show that the adsorption of dyes on N-doped TiO₂ was high at pH 3 and follows the Langmuir adsorption isotherm. The Langmuir monolayer adsorption capacity of dyes on N-doped TiO₂ was 39.5, 86.0, and 96.3 mg g^?1 for RY 84, RR 120, and RB 160, respectively. The photocatalytic degradation of the dyes follows pseudo first-order kinetics and the rate constant values are higher for N-doped TiO₂ when compared with that of undoped TiO₂. Moreover, the degradation of RY 84 on N-doped TiO₂ in sunlight was faster than the commercial Aeroxide^® P25. However, the P25 has shown higher photocatalytic activity for the other two dyes, RR 120 and RB 160. The COD of 50 mg l^?1 Reactive Yellow-84, RR 120 and RB 160 was reduced by 65.1, 73.1, and 69.6 %, respectively, upon irradiation of sunlight for 3 h in the presence of N-doped TiO₂. The photocatalyst shows low activity for the degradation of RY 84 dye, when its concentration was above 50 mg l^?1, due to the strong absorption of photons in the wavelength range 200–400 nm by the dye solution. LC–MS analysis shows the presence of some triazine compounds and formimidamide derivatives in the dye solutions after 3 h solar light irradiation in the presence of N-doped TiO₂.     

Degradation of ofloxacin by UVA-LED/TiO<Subscript>2</Subscript> nanotube arrays photocatalytic fuel cells

The degradation of ofloxacin (OFX) at low concentration in aqueous solution by UVA-LED/TiO₂ nanotube arrays photocatalytic fuel cells (UVA-LED/TiO₂ NTs PFCs) was investigated. TiO₂ nanotube arrays (TiO₂ NTs) photoanode prepared by anodization-constituted anatase–rutile bicrystalline framework. The results indicated that the degradation efficiency of OFX by UVA-LED/TiO₂ NTs PFC was significantly enhanced by 14.3% compared with UVA-LED/TiO₂ NTs photocatalysis. The pH affected the degradation efficiency markedly; the highest degradation efficiency (95.0%) and the pseudo-first-order reaction rate constant k value (0.049 min^?1) were achieved in neutral condition (pH 7.0). The degradation efficiency increased with the increasing concentration of dissolved oxygen (DO) in the UVA-LED/TiO₂ NTs PFC. The main reactive species of OFX degradation are positive holes (h⁺) and superoxide ion radicals (O ₂ ^·? ) in a DO sufficient condition. Furthermore, the possible pathways of OFX degradation were proposed.     

One-dimensional porous Ag/AgBr/TiO<Subscript>2</Subscript> nanofibres with enhanced visible light photocatalytic activity

One-dimensional (1D) Ag/AgBr/TiO₂ nanofibres (NFs) have been successfully fabricated by the one-pot electrospinning method. In comparison with bare TiO₂ NFs and Ag/AgBr/PVP (polyvinylpyrrolidone) NFs, the 1D Ag/AgBr/TiO₂ NFs photocatalyst exhibits much higher photocatalytic activity in the degradation of a commonly used dye, methylene blue (MB), under visible light. The photocatalytic removal efficiency of MB over Ag/AgBr/TiO₂ NFs achieves almost 100 % in 20 min. The photocatalytic reaction follows the first-order kinetics and the rate constant (k) for the degradation of MB by Ag/AgBr/TiO₂ NFs is 5.2 times and 6.6 times that of Ag/AgBr/PVP NFs and TiO₂ NFs, respectively. The enhanced photocatalytic activity is ascribed to the stronger visible light absorption, more effective separation of photogenerated electron-hole pairs, and faster charge transfer in the long nanofibrous structure. The Ag/AgBr/TiO₂ NFs maintain a highly stable photocatalytic activity due to its good structural stability and the self-stability system of Ag/AgBr. The mechanisms for photocatalysis associated with Ag/AgBr/TiO₂ NFs are proposed. The degradation of MB in the presence of scavengers reveals that h⁺ and ^?O ₂ ^? significantly contribute to the degradation of MB.     

Photocatalytic activity and biodegradation of polyhydroxybutyrate films containing titanium dioxide

This study aims to evaluate the photocatalytic activity and biodegradation of polyhydroxybutyrate (PHB) films containing titanium dioxide (TiO₂). Nanosized TiO₂ photocatalysts were immobilized onto PHB film to overcome the difficulty of the recovery process. PHB is a suitable base material as it is naturally biodegradable and is produced from renewable resources. The photocatalytic degradation of organic compounds, photocatalytic sterilization activity and biodegradation rate in garden soil of PHB-TiO₂ composite films were investigated. After an hour under solar illumination, 96% of methylene blue solution was decolorized. The antibacterial activity against Escherichia coli (E. coli) using PHB-TiO₂ composite film exhibited enhanced photocatalytic sterilization activity over time. As for the ability to biodegrade, PHB-TiO₂ composite films placed on soil surface with no direct solar illumination showed slower degradation rate compared to those receiving direct solar illumination. Interestingly, the latter composite films showed faster degradation rates compared to pure PHB films indicating that the degradation is mainly due to photocatalytic activity. PHB-TiO₂ composite films buried in soil generally showed slower degradation rates compared to pure PHB films and were dependent on the soil microbial activity.     

Preparation and solar-light photocatalytic activity of TiO2 composites: TiO2/kaolin,TiO2/diatomite,and TiO2/zeolite

Three TiO₂ loaded composites, TiO₂/kaolin, TiO₂/diatomite, and TiO₂/zeolite, were prepared in order to improve the solar-light photocatalytic activity of TiO₂. The results showed that the photocatalytic activity could obviously be enhanced by loading appropriate amount of inorganic mineral materials. Meanwhile, TiO₂ content, heat-treatment temperature and heat-treatment time on the photocatalytic activity were reviewed. Otherwise, the effect of solar light irradiation time and dye concentration on the photocatalytic degradation of Acid Red B was investigated. Furthermore, the degradation mechanism and adsorption process were also discussed.     

Full factorial experimental design applied to oxalic acid photocatalytic degradation in TiO2 aqueous suspension

Full factorial experimental design technique was used to study the main effects and the interaction effects between operational parameters in the photocatalytic degradation of oxalic acid in a batch photo-reactor using TiO₂ aqueous suspension. The important parameters which affect the removal efficiency of oxalic acid such as agitation, initial concentration, volume of the solution and TiO₂ dosage were investigated. The parameters were coded as X₁, X₂, X₃ and X₄, consecutively, and were investigated at two levels (−1 and +1). The effects of individual variables and their interaction effects for dependent variables, namely, photocatalytic degradation efficiency (%) were determined. From the statistical analysis, the most effective parameters in the photocatalytic degradation efficiency were initial concentration and volume of solution. The interaction between initial concentration, volume of solution and TiO₂ dosage was the most influencing interaction. However, the interaction between agitation, initial concentration and volume of solution was the least influencing parameter.     

Photocatalytic degradation of azo dyes catalyzed by Ag doped TiO2 photocatalyst

In this paper, photocatalytic degradation of commercial textile azo dyes catalyzed by titanium dioxide and modified titanium dioxide with Ag metal (1% w/w) in aqueous solution under irradiation with a 400 W high-pressure mercury lamp is reported. The effect of various parameters such as irradiation time of UV light, amount of photocatalyst, flow rate of oxygen, pH and temperature for the Ag-TiO₂ photocatalyst were investigated. Kinetic investigations of photodegradation indicated that reactions obey improved Langmuir-Hinshelwood model and pseudo-first-order law. The rate constant studies of photocatalytic degradation reactions for Ag-TiO₂ and TiO₂ photocatalysts indicated that in all cases the rate constant of the reaction for Ag-TiO₂ was higher than that of TiO₂.     

Photocatalytic degradation of 4-chlorophenol: A mechanistically-based model

The photocatalytic degradation of 4-CP was mathematically modelled using the mechanistic insights and data presented in an earlier study [1]. The solution and surface concentrations of reacting species were calculated by solving a system of differential equations that account for oxidation reactions of dissolved and adsorbed species, adsorption and desorption, reduction of oxygen, and hole-electron recombination. The differential equations were integrated over discrete time-periods and annular regions of the photoreactor. The resulting model predicts the trends observed in studies in other laboratories using different experimental apparati. Using the model it is possible to predict effects of reactor geometry, TiO₂ loading, light intensity, and mixing on the course of TiO₂ photocatalytic oxidation. The model verifies the importance of surface reactions, and reveals the need to better understand the fate and role of oxygen in TiO₂ photocatalytic systems.     

Use of catalase and superoxide dismutase to assess the roles of hydrogen peroxide and superoxide in the TiO2 or ZnO photocatalytic destruction of 1,2-dimethoxybenzene in water

The effects of two antioxidant enzymes on the rate of disappearance, r, of the pollutant 1,2-dimethoxybenzene (1,2-DMB) in UV-irradiated (λ > 340 nm) TiO₂ or ZnO aqueous suspensions have been determined. Catalase, which catalyzes the overall reaction 2H₂O₂ →> 2H₂O + O₂, caused a relatively moderate decrease in r in the case of TiO₂ and no effect in the case of ZnO, showing that hydrogen peroxide formed in situ is not essential for the pollutant removal. The effect of H₂O₂ added to ZnO was negative and in the case of TiO₂ was either favorable or unfavorable depending on the initial ratio [H₂O₂]/[1,2-DMB] as a result of competition between these compounds for the adsorption sites and/or the photoproduced holes, the formation of additional OH^? radicals and the detrimental modification of the TiO₂ surface. Favorable and unfavorable effects of added H₂O₂ were suppressed by catalase. The detrimental effect on r of superoxide dismutase (SOD), which catalyzes the overall reaction 2O₂ ^?? + 2H⁺ →O₂ + H₂O₂, was very important for both TiO₂ and ZnO. It is inferred that it stems from the catalytic action of SOD and not from competitive photocatalytic destruction of 1,2-DMB and SOD or from the formation of H₂O₂. Therefore, these results point to the essential role of the O₂ ^?? radical-anion as an active species in the photocatalytic degradation of the pollutant and this role is tentatively discussed, in particular with respect to the formation of the 1,2-DMB^?+ radical-cation.     

掺氮TiO2可见光降解有机污染物的比较研究

用溶胶-凝胶法制备了不同掺杂量的N/TiO₂复合纳米粉末, 采用X射线衍射(XRD)、扫描透镜(TEM)、紫外-可见反射吸收光谱(UV-vis)对催化剂进行了初步表征. 通过X射线光电子能谱(XPS)、元素分析仪(EA)测定其含氮量. XPS分析结果显示TiO₂晶格中的氧被氮原子取代, N/TiO₂表面存在Ti^3＋离子; 紫外-可见反射吸收光谱测得不同掺杂量的N/TiO₂的禁带宽度(E_g), 推测在TiO₂价带上方生成了由N诱导产生的中间带, 当氮、钛摩尔比为0.0880时N/TiO₂的E_g最小, 为2.50 eV. 在可见光下, 以酸性桃红(SRB)和无色小分子对氯苯酚(4-CP)作为可见光活性实验的探针反应, 确定了最佳掺杂比为n_N/n_Ti＝0.0880. 结果表明, 最佳掺杂量下N/TiO₂能显著降解SRB和4-CP, 通过测定ESR, IR, TOC, COD, 重点比较了TiO₂在掺杂N前后在降解SRB和4-CP时的差异, 包括氧化物种、矿化率、最终产物等, 证明在可见光下, N/TiO₂的降解机理为电子从独立的N 2p轨道激发到Ti 3d轨道, 产生羟基自由基等氧化物种, 达到降解有机物的目的.     

Characterization of Titanium Dioxide Doped with Nitrogen and Sulfur and its Photocatalytic Appraisal for Degradation of Phenol and Methylene Blue

The degradation of organic dyes in the presence of modified TiO₂ is still under intensive investigation. We report here an evaluation of the photocatalytic activity of nitrogen‐ (N‐) and sulfur‐ (S‐) doped TiO₂ for the degradation of phenol and methylene blue (MB). N‐doped TiO₂ (N–TiO₂), S‐doped TiO₂ (S–TiO₂), and N–S‐doped TiO₂ (N–S–TiO₂) were prepared using the sol–gel method. The photocatalytic activity was evaluated in a batch reactor using phenol and MB as models of pollutants. In addition, this investigation was performed using a household lamp as the visible light source. Properties of the synthesized materials in terms of Brunauer–Emmett–Teller (BET) surface analysis, field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), and photocatalytic ability were examined. Our study shows that N–S–TiO₂ exhibits better photocatalytic degradation ability for all the considered dyes compared to the other doped TiO₂ materials. In conclusion, we have successfully prepared and evaluated the photocatalytic activity of N‐ and S‐doped TiO₂ for the degradation of phenol and MB using an ordinary household lamp.     

Adsorption factor and photocatalytic degradation of dye-constituent aromatics on the surface of TiO2 in the presence of phosphate anions

The photocatalytic degradation for some kinds of dye-constituent aromatics with TiO₂ in the presence of phosphate anions in aqueous dispersion was investigated under both visible light (λ>480 nm) and UV irradiation. The influences of phosphate anion upon the degradation of organics under these different conditions was revealed by the measurement of point of zero ξ-potential (P _ZC) of TiO₂, UV-VIS spectra, HPLC and LC-MS. The adsorption and photodegradation of some organics, which adsorb on the surface of TiO₂ by a dominating group bearing a positive charge, was enhanced, while that of others, which adsorb on the surface of TiO₂ by a dominating group bearing negative charge, was depressed by the presence of phosphate anions under UV irradiation at the experimental conditions (pH 4.3). It was confirmed that better adsorption of organics on the surface of TiO₂ had an advantage in their photocatalytic degradation under UV irradiation. On the other hand, although the adsorption of rhodamine B (RhB) and methylene Blue (MB) markedly increased, their degradation under visible light irradiation was depressed in the presence of phosphate anions. It is suggested that phosphate anion greatly blocked the electron transfer from excited RhB and MB molecules as RhB and MB molecules predominantly adsorbed on the surface of TiO₂ through the electrostatic interaction with surface adsorbed phosphate anions.     

Sustainable fabrication of silver-titania nanocomposites using goji berry (Lycium barbarum L.) fruit extract and their photocatalytic and antibacterial applications

Silver-titania nanocomposites (Ag-TiO₂ NCs) have unique functional attributes due to their photocatalytic and antibacterial properties. In this study, titania nanoparticles (TiO₂-NPs) were successfully in-situ decorated with silver nanoparticles (Ag-NPs) using the aqueous extract of goji berries (Lycium barbarum L.) as a bioreducing and stabilizing agent. Different Ag-TiO₂ NCs were synthesized by treating different concentrations of silver nitrate with a specific concentration of TiO₂-NPs in the presence of fruit extract. The green-synthesized NCs were characterized using several techniques viz., ultraviolet–visible spectrophotometry, X-ray diffractometry (XRD), scanning electron microscopy, field-emission transmission electron microscopy (FE-TEM), Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. XRD analysis revealed the formation of face-centered cubic (fcc) crystals, and FE-TEM analysis revealed the embedment of Ag-NPs throughout the surface of TiO₂-NPs. The average size of Ag-NPs on TiO₂-NPs increased from 11.2 ± 3.05 nm to 16.4 ± 4.5 nm with an increase in the concentration of silver ions, and the morphology of Ag-NPs was predominantly quasi-spherical and hexagonal. These NCs exhibited an excellent photocatalytic degradation of an azo dye, methylene blue (MB). The synthesized Ag-TiO₂ NCs (3:1) showed higher photocatalytic degradation efficiency of ∼ 93.4% for MB in 130 min under visible light irradiation. Ag-TiO₂ NC_S also exhibited good antibacterial activities towards Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative). Therefore, the formation of Ag-NPs on the surface of TiO₂-NPs to form Ag-TiO₂ NCs exhibits eco-friendly photocatalytic degradation of azo dye contaminants as well as antibacterial activity.     

Antibacterial inactivation of spiramycin after titanium dioxide photocatalytic treatment

The photocatalytic degradation of an antibiotic (spiramycin) has been studied using immobilized titanium dioxide (TiO₂) as a photocatalyst in a laboratory reactor under ultraviolet illumination (365 nm). The degradation of the antibiotic was monitored by ultraviolet spectrophotometry and high-pressure liquid chromatography and confirmed by an antibacterial activity evaluation. Two types of TiO₂ (P25 and PC500) immobilized on glass plates were compared. For TiO₂ PC500 immobilization on glass and paper was also studied. A slightly better degradation was obtained with TiO₂ P25 for which the degradation kinetics were investigated. The Langmuir–Hinshelwood kinetic model is satisfactorily obeyed at initial time and in the course of the reaction. Adsorption and apparent rate constants were determined. These results show a complete degradation of spiramycin, which was confirmed by the inhibition of the antibacterial activity of Staphylococcus xylosus, when exposed to spiramycin solutions treated with photocatalyst for a short time. In addition, the codegradation of spiramycin and tylosin was investigated and showed that tylosin had a higher affinity to the catalyst TiO₂ P25 than spiramycin. The complete degradation of spiramycin confirms the feasibility of such a photocatalytic treatment process for spiramycin elimination from contaminated water.     

Synthesis of CuAPTPP-TDI-TiO2 Conjugated Microspheres and its Photocatalytic Activity (cited: 1)

The metal complex 5-(4-aminophenyl)-10,15,20-triphenylporphyrin copper (CuAPTPP) was covalently linked on the surface of TiO₂ microspheres by using toluene disocyanate (TDI) as a bridging bond unit. The hydroxyl group (-OH) of TiO₂ microspheres surface and the amino group (-NH₂) of CuAPTPP reacted respectively with the active -NCO groups of TDI to form a surface conjugated microsphere CuAPTPP-TDI-TiO₂ that was confirmed by FT-IR spectra. The CuAPTPP-TDI-TiO₂ microspheres were characterized with UV-visible, elemental analysis, XRD, SEM, and UV-Vis diffuse reflectance spectra. The effect of amounts of linked TDI on the performance of photocatalytic microspheres was discussed, and the optimal molar ratio of TDI:TiO₂ was established. The photocatalytic activity of CuAPTPP-TDI-TiO₂ was evaluated using the photocatalytic degradation of methylene blue (MB) under visible-light irradiation. The results showed that, TDI, as a bond unit, was used to form a steady chemical brigdging bond linking CuAPTPP and the surface of TiO₂ microspheres, and the prepared catalyst exhibited higher photocatalytic activity under visible-light irradiation for MB degradation. The degradation rate of 20 mg/L MB could reach 98.7% under Xe-lamp (150 W) irradiation in 120 min. The degradation of MB followed the first-order reaction model under visible light irradiation, and the rate constant of 5.1×10^-2 min^-1 and the half-life of 11.3 min were achieved. And the new photocatalyst can be recycled for 4 times, remaining 90.0% MB degradation rate.     

Defect induced nickel,nitrogen-codoped mesoporous TiO2 microspheres with enhanced visible light photocatalytic activity

Nickel, nitrogen-codoped mesoporous TiO₂ microspheres (Ni–N–TiO₂) with high surface area, and an effective direct band gap energy of ∼2.58 eV. Nickel sulfate used as the Ni source and ammonia gas as the N source here. The efficiency of the as-prepared samples was investigated by monitoring the degradation of Rhodamine B under visible light irradiation. The experimental results indicate that Ni-doped mesoporous TiO₂ microspheres show higher photocatalytic activity than mesoporous TiO₂ microspheres under visible light irradiation. It mainly due to that the electron trap level (Ni²⁺/Ni⁺) promoting the separation of charge carriers and the oxygen vacancies inducing the visible light absorption. In addition, Ni–N–TiO₂ shows enhanced activity compared with Ni–TiO₂. Codopants and dopants are found to be uniformly distributed in TiO₂ matrix. Among the all samples the 0.5% molar quantity of Ni dopant and 500 °C 2 h nitriding condition gives the highest photocatalytic activity. The treatment of ammonia gas on Ni–TiO₂ sample induced oxygen vancancies, substitutional and interstitial N. A suitable treatment by ammonia gas also promote separation of charge carriers and the absorption of visible light. The active species generated in the photocatalytic system were also investigated. The strategy presented here gives a promising route towards the development of a metal and non-metal codoped semiconductor materials for applied photocatalysis and related applications.     

Improved Photodegradation of Organic Contaminants Using Nano‐TiO2 and TiO2–SiO2 Deposited on Portland Cement Concrete Blocks

The photocatalytic activity of TiO₂ nanoparticles (nano‐TiO₂) and its hybrid with SiO₂ (nano‐TiO₂–SiO₂) for degradation of some organic dyes on cementitious materials was studied in this work. Nanohybrid photocatalysts were prepared using an inorganic sol–gel precursor and then characterized using XRD, SEM and UV–Vis. The grain sizes were estimated by Scherrer's equation to be around 10 nm. Then, a thin layer was applied to Portland cement concrete (PCC) blocks by dipping them into nano‐TiO₂ and nano‐TiO₂–SiO₂ solution. The efficiency of coated PCC blocks for the photocatalytic decomposition of two dyes, Malachite Green oxalate (MG) and Methylene Blue (MB), was examined under UV and visible irradiation and then monitored by the chemical oxygen demand tests. The results showed that more than 80% and 92% of MG and MB were decomposed under UV–Vis irradiation using blocks coated with nano‐TiO₂–SiO₂. TiO₂/PCC and TiO₂–SiO₂/PCC blocks showed a significant ability to oxidize dyes under visible and UV lights and TiO₂–SiO₂/PCC blocks require less time for dye degradation. Based on these results, coated blocks have increased photocatalytic activity which can make them commercially accessible photocatalysts.