Visible-light-sensitive photocatalytic reaction on chromium-containing mesoporous silica: selective partial oxidation of propane with molecular oxygen

The photocatalytic reactivities of chromium-containing mesoporous silica molecular sieves (Cr-HMS) under visible light irradiation have been investigated. Cr-HMS involves tetrahedral chromium oxide (Cr-oxide) moieties which are highly dispersed and incorporated in the framework of molecular sieve with two terminal Cr=O groups. In the presence of propane with molecular oxygen, a partial oxidation proceeded under visible light irradiation to produce acetone and acrolein, with high selectivity, while a complete oxidation proceeded under UV light irradiation mainly to produce CO₂. The charge-transfer excited state of the tetrahedral Cr-oxide moieties plays a significant role in the photocatalytic reactions.     

低硅铝比ZSM-5分子筛的合成及其正庚烷裂化反应性能

以氨水为矿化剂,通过添加NH₄⁺离子水热合成了具有较低骨架硅铝比的ZSM-5分子筛。通过X射线衍射(XRD)、扫描电镜(SEM)、固体核磁共振(MAS-NMR)等表征手段,研究了硅源、铝源、矿化剂、阳离子等对ZSM-5分子筛的结晶度、形貌尺寸和骨架硅铝比等的影响,研究了ZSM-5分子筛的骨架硅铝比对正庚烷催化裂化反应的影响。研究表明,投料硅铝比越低,铝原子越难进入到分子筛骨架中;当氨水为矿化剂、正硅酸四乙酯为硅源时可以合成骨架硅铝比较低的氢型ZSM-5分子筛,添加NH₄⁺离子可以增强骨架铝的嵌入,进一步降低分子筛的骨架硅铝比(24.2)。正庚烷裂化反应结果表明,降低分子筛的骨架硅铝比可以提高正庚烷裂化反应的活性,但会降低低碳烯烃的选择性。     

Photocatalytic Hydrogen and Oxygen Formation from Water over Ga-modified Zeolite

Water could be decomposed into hydrogen and oxygen over Ga-modified ZSM-5 zeolite under UV irradiation. The photocatalytic activity was elevated significantly by supporting the gallium species and was sensitive to the loading amount of gallium species on the ZSM-5 zeolites.     

直接法合成ZSM—5型分子筛的物理化学表征

用高分辨~(29)Si、~(27)Al和~(23)Na NMR对直接法合成的不同硅铝比ZSM-5型分子筛局域结构作了表征,用~(29)Si和~(27)Al魔角旋转核磁共振研究了经不同温度水蒸气处理ZSM-5型分子筛的骨架脱铝,对不同条件下ZSM-5型分子筛中发生的正交-单斜晶型变化进行了系统的X射线衍射实验研究。     

Dual-functional photocatalysis boosted by electrostatic assembly of porphyrinic metal-organic framework heterojunction composites with CdS quantum dots

Photocatalytic dual-functional reaction under visible light irradiation represents a sustainable development strategy. In detail, H₂ production coupled with benzylamine oxidation can remarkably lower the cost by replacing sacrificial agents. In this work, Cd S quantum dots(Cd S QDs) were successfully loaded onto the surface of a porphyrinic metal-organic framework(Pd-PCN-222) by the electrostatic selfassembly at room temperature. The consequent Pd-PCN-222/CdS heterojunction composites...     

Catalytic Oxidation of CO and Benzene over Metal Nanoparticles Loaded on Hierarchical MFI Zeolite

In order to obtain highly active catalytic materials for oxidation of carbon monoxide and volatile organic compounds (VOCs), monometallic platinum, copper, and palladium catalysts were prepared by using of two types of ZSM-5 zeolite as supports—parent ZSM-5 and the same one treated by HF and NH₄F buffer solution. The catalyst samples, obtained by loading of platinum, palladium, and copper on ZSM-5 zeolite treated using HF and NH₄F buffer solution, were more active in the reaction of CO and benzene oxidation compared with catalyst samples containing untreated zeolite. The presence of secondary mesoporosity played a positive role in increasing the catalytic activity due to improved reactant diffusion. The only exception was the copper catalysts in the reaction of CO oxidation, in which case the catalyst, based on untreated ZSM-5 zeolite, was more active. In this specific case, the key role is played by the oxidative state of copper species loaded on the ZSM-5 zeolites.     

Ag@AgCl修饰的锐钛矿相TiO2纳米管的制备及其光催化性能

首先采用水热合成法和双氧水处理制备了具有锐钛矿相的TiO2纳米管,然后通过沉淀和光化学反应将Ag@AgCl纳米粒子负载于其上,从而制得TiO2纳米管负载的表面等离子体光催化剂.结果表明,经Ag@AgCl纳米粒子修饰后,锐钛矿相TiO2纳米管因表面等离子共振效应而对可见光具有明显的响应,光生电子-空穴对更容易分离,因而T...     

Mechanistic studies of the photocatalytic oxidation of trichloroethylene with visible-light-driven N-doped TiO2 photocatalysts

Visible-light-driven TiO2 photocatalysts doped with nitrogen have been prepared as powders and thin films in a cylindrical tubular furnace under a stream of ammonia gas. The photocatalysts thus obtained were found to have a band-gap energy of 2.95 eV. Electron spin resonance (ESR) under irradiation with visible light (lambda > or = 430 nm) afforded the increase in intensity in the visible-light region. The concentration of trapped holes was about fourfold higher than that of trapped electrons. Nitrogen-doped TiO2 has been used to investigate mechanistically the photocatalytic oxidation of trichloroethylene (TCE) under irradiation with visible light (lambda > or = 420 nm). Cl and O radicals, which contribute significantly to the generation of dichloroacetyl chloride (DCAC) in the photocatalytic oxidation of TCE under UV irradiation, were found to be deactivated under irradiation with visible light. As the main by-product, only phosgene was detected in the photocatalytic oxidation of TCE under irradiation with visible light. Thus, the reaction mechanism of TCE photooxidation under irradiation with visible light clearly differs markedly from that under UV irradiation. Based on the results of the present study, we propose a new reaction mechanism and adsorbed species for the photocatalytic oxidation of TCE under irradiation with visible light. The energy band for TiO2 by doping with nitrogen may involve an isolated band above the valence band.     

Application of an Ion Beam Technique for the Design of Visible Light-Sensitive, Highly Efficient and Highly Selective Photocatalysts: Ion-Implantation and Ionized Cluster Beam Methods

As a new concept for the design of effective photocatalysts, an ion beam technology using accelerated metal ions, a metal ion implantation and an ionized cluster beam (ICB) method, have been applied to design unique photocatalysts. The metal ion implantation of TiO₂ and Ti-containing zeolites with highly accelerated metal ions (V⁺, Cr⁺, etc.) is useful in designing photocatalysts that can operate efficiently under visible light irradiation. Also, an ICB method with a low acceleration energy is useful in preparing transparent TiO₂ thin films on various types of substrates for the efficient photocatalytic degradation of pollutants diluted in water and air. The combination of the ICB method and metal ion implantation can develop the TiO₂ thin films that are able to operate not only under UV light but also under visible light irradiation.     

Microwave synthesis,characterization and catalytic properties of titanium-incorporated ZSM-5 zeolite

Titanium-incorporated ZSM-5 zeolites (Si/Al = 50–200 and Si/Ti = 70) were successfully synthesized in a one-step sol-gel process under microwave irradiation. The characteristics of Ti-ZSM-5 zeolites were investigated using X-ray power diffraction, UV/Vis-DRS, FT-IR spectroscopy and solid-state ²⁷Al-NMR to monitor the physico-chemical properties. Simultaneously, the acidic properties were characterized by the NH₃-TPD profile. The characterization results revealed that the Ti⁴⁺ and Al³⁺ ions were well incorporated into the framework of Ti-ZSM-5 zeolite. The prepared zeolite was moderately active but selective in the dehydration of methanol to dimethyl ether.     

红外光谱法研究不同硅铝比的ZSM-5及ZSM-11分子筛的骨架振动

红外光谱法研究分子筛的骨架振动得出了在X、Y等沸石分子筛骨架上振动频率与四面体中铝含量的线性关系^[1]。但未见到有关ZSM-5型的报道.本文用红外光谱法系壳探讨了硅铝比和ZSM-5及ZSM-11的骨架振动频率之间的线性关系,并将由IR得到的SiO₂/Al₂O₃比与化学分析值进行了比较。     

Photocatalytic activity of visible light-responsive TiO<Subscript>2</Subscript> thin films deposited on various anodized Ti-metal substrates by a RF magnetron sputtering method

Visible light-responsive TiO₂ (Vis-TiO₂) thin film has been deposited on two different kinds of anodized Ti-metal substrates, i.e., plate-type Titanystar (P-Titanystar) or non-woven fabric Titanystar (N-Titanystar) by a radio-frequency magnetron sputtering (RF-MS) method. These Vis-TiO₂ thin film photocatalysts (Vis-TiO₂/P-Titanystar and Vis-TiO₂/N-Titanystar) showed high activity for the oxidation of 2-propanol in water under UV light irradiation while Vis-TiO₂/N-Titanystar showed higher activity than Vis-TiO₂/P-Titanystar. Furthermore, photocatalytic activity of Vis-TiO₂/N-Titanystar was enhanced by the Pt deposition by an RF-MS deposition method. Pt loaded Vis-TiO₂/N-Titanystar (Pt-Vis-TiO₂/N-Titanystar) acted as an efficient photocatalyst for the oxidation of methanol vapor under UV light irradiation even in a flow system. Moreover, it was found that Pt-Vis-TiO₂/N-Titanystar is an effective photocatalyst for the oxidation of various organic compounds in gas phase or ammonia gas even under visible light irradiation (λ > 420 nm) at 293 K.     

Cu functionalized nano crystalline ZSM-5 as efficient catalyst for selective oxidation of toluene

Nano crystalline ZSM-5 (NZ) functionalized with Cu has been explored for the selective oxidation of toluene to benzoic acid for the first time, where a comparison is made with the traditional microcrystalline ZSM-5 (MZ) based catalyst having similar framework Si/Al ratios at organic solvent-less reaction conditions in presence of H₂O₂ as a green oxidant. The ZSM-5 catalysts exhibited oxidation property even in the absence of any Cu species, but with low toluene conversions and benzoic acid yields. Functionalization with Cu greatly enhanced the benzoic acid formation, especially on NZ loaded with 0.4 wt% of Cu (Cu-NZ) to produce 92 wt% of benzoic acid, by virtue of the presence of highly dispersed nano particles of CuO along with Cu⁺² ions on the high surface area, mesopore possessing NZ support, revealed from XRD, N₂ adsorption-desorption, XPS, SEM, TEM, FITR, TPR and TPD analysis.     

Nano‐WO3‐SO3H as a New Photocatalyst Insight Through Covalently Grafted Brønsted Acid: Highly Efficient Selective Oxidation of Benzyl Alcohols to Aldehydes

Modification of nano‐WO₃ with ?SO₃H groups as a covalently grafted solid acid reduced its band‐gap energy from 2.8 to 2.4 eV and made it an ideal nominee for photocatalytic reaction under visible light irradiation. This nano‐photocatalyst has been successfully used for the selective oxidation of different benzyl alcohols to corresponding aldehydes under blue LED irradiation. The reaction became approximately two times faster with excellent yields. It has shown that the nitrobenzene as an available industrial oxidant is applicable for photocatalytic oxidation of benzyl alcohol; remarkably high yield and selectivity have been observed.     

负载贵金属光催化剂的光催化活性研究

在注入V离子的二氧化钛光催化剂上负载贵金属,制备了在可见光照射下具有高光催化活性的功能型光催化剂,研究在可见光和太阳光照射下丙炔的光催化水解反应，利用这些改性的二氧化钛构筑太阳能到化学能的转换系统.研究结果发现了V/Pt光催化剂在丙炔和水的光催化水解反应中，由于贵金属的存在，有利于促进发生加氢反应；导致丙烯的生成量增加.在可见光下的光催化活性也和负载贵金属所处的氧化状态有着密切的关系，贵金属完全被还原到0价是提高光催化活性的必要条件.     

The appearance of adsorption ability of modified zeolites for sodium dodecylsulfate from its aqueous solution

Hydrophobic faujasite-type zeolites were prepared by the treatment of hydrophilic Na-Y_4.6 with silicon tetrachloride (SiCl₄) by way of dealumination-silicon exchange reaction. Hydrophilic-hydrophobic characters of these zeolite surfaces were evaluated by measurements of immersional heats into water orn-hexane. Adsorption rates of sodium dodecylsulfate (SDoS) on these zeolites from its aqueous solution and their adsorption characteristics were investigated, and compared with those on ZSM-5 with various Si/Al ratios.The adsorption ability of SDoS into zeolite micropores developed on the zeolite only when it was modified to some extent. The adsorption rates of SDoS were very slow and proved to be affected by molecular diffusion in zeolite pores. They depended on hydrophilic-hydrophobic character of zeolites as well as on pore structures. Adsorption isotherms of SDoS were of Langmuir type, which indicates that the adsorption occurred typically into zeolite pores. Adsorbed amount of SDoS depended on the balance of hydrophilic-hydrophobic character and number of cation site of zeolite surfaces, and had a maximum in case of ZSM-5 zeolites.     

La和Zn掺杂铌酸铋的光催化降解性能及其机理

用化学共沉淀法制备了镧和锌掺杂的铌酸铋纳米颗粒,表征了制备样品的微观结构和光催化降解性能。结果表明制备的样品对RhB表现出良好的可见光催化降解活性,且光催化效果受各种因素的影响。其中,Bi_(0.96)La_(0.04)NbO_4用量为0.15 g时,对pH=4、50 m L浓度为5 mg·L-1 RhB溶液的光催化效果最佳。光催化机理研究表明催化剂在可见光照射下产生的电子空穴对Rh B的降解起主要作用。该催化剂的制备方法简单、光催化性能稳定,5次循环后的活性仍大于95%。     

La和Zn掺杂铌酸铋的光催化降解性能及其机理

用化学共沉淀法制备了镧和锌掺杂的铌酸铋纳米颗粒,表征了制备样品的微观结构和光催化降解性能。结果表明制备的样品对RhB表现出良好的可见光催化降解活性,且光催化效果受各种因素的影响。其中,Bi_0.96La_0.04NbO₄用量为0.15 g时,对pH=4、50 mL浓度为5 mg·L^-1 RhB溶液的光催化效果最佳。光催化机理研究表明催化剂在可见光照射下产生的电子空穴对RhB的降解起主要作用。该催化剂的制备方法简单、光催化性能稳定,5次循环后的活性仍大于95%。     

钯氮共掺杂TiO2的制备与表征及其可见光催化活性

在空气气氛和N₂中热处理表面均匀分散有尿素和氯化钯的纳米管钛酸,制备了两个系列Pd/N共掺杂的TiO₂光催化剂,并对所得样品进行了X射线衍射、透射电镜、X射线光电子能谱、紫外-可见漫反射光谱、荧光光谱和电子自旋共振等表征.结果表明,焙烧气氛对样品的形貌、晶体结构、光谱吸收、生成的氧空位浓度和可见光光催化性能的影响很大,其中在空气气氛中制备的样品光催化性能优于在N₂中制备的样品.在可见光(λ≥420nm)照射下,以丙烯为模型污染物考察了样品的光催化活性,发现在空气中400℃下焙烧的样品具有最佳的可见光催化活性.另外,讨论了Pd/N共掺杂TiO₂光催化剂具有可见光响应的机理,认为掺杂的Pd/N元素和制备过程中生成的氧空位是影响可见光催化性能的重要因素.     

Study of One Step Synthesis of Rare Earth Zeolite (Ln–ZSM-5) and Application for Low Temperature CO Catalytic Oxidation

A series of rare earth zeolites Ln–ZSM-5 (Ln = La, Ce, Pr, Nd) were synthesized directly via a one-step hydrothermal method. The obtained zeolites were used as support and applied in low-temperature CO oxidation. The influence of various factors such as rare earth types, rare earth contents, particle sizes of molecular sieve, and silica alumina ratios, etc., on the catalytic activity of CO oxidation were investigated in detail. The results showed that low silica small size Ce–ZSM-5 (1 % Ce content) had the highest activity. The results also showed that Ce–ZSM-5 zeolite prepared by one-step direct synthesis was more suitable as catalytic support than ZSM-5 or Ce/ZSM-5 zeolite, prepared by impregnation of ZSM-5 with Ce.