CHROMOTROPIC CHANGES OF Cu(II) AND Ni(II) COMPLEXES WITH N2O2 AND N3O2 SCHIFF-BASE LIGANDS IN THE SOLID PHASE

Abstract

Four new Schiff-base ligands have been prepared from the condensation of 3-formyl-4-hy-droxy-1,8-naphthyridin-2-one with different diamines and a triamine, H₂L_a-H₂L_d. Two series of Ni(II) and Cu(II) complexes with the four ligands were also prepared. The ligands and their metal complexes were characterized by chemical analyses, IR, Far-IR, electronic, ESR and mass spectra as well as magnetic measurements and X-ray diffraction patterns.

Different products for Ni(II) and Cu(II) were obtained in similar reactions with the same metal salt, depending on the nature of the ligand. Different geometries were also obtained depending on the counter anion of metal salt. Thus, violet square-planar Cu(II) complexes were obtained with Cu(OAc)₂. H₂O and green octahedral ones with CuCl₂. 2H₂O, except the reaction with ligand H₂L_d which gave only an octahedral product whether the anion was acetate, chloride or perchlorate. Electronic and ESR spectra were used to differentiate between the two geometries of the Cu(II) complexes. The green octahedral Cu(II) complexes undergo irreversible thermochromism to the violet square-planar complexes except the copper complex of the ligand H₂L_d which did not not show any color change and retained its octahedral geometry. Based on the magnetic moments and thermal analyses, only one Ni(II) complex of the Schiffbase ligand H₂L_c undergoes reversible thermochromism from green (octahedral) to red (squareplanar). The reverse change of the thermal product (red) to the parent complex (green) proceeded on exposure to atmospheric air for a few minutes. On the other hand, Ni(II) complexes of ligands H₂L_a and H₂L_b have stable square-planar geometry and all efforts to add other ligands such as H₂O or pyridine to these complexes failed to yield other products. The corresponding Cu(II) complexes were easily transformed to their octahedral geometry by adding H₂O or pyridine and heating.     

Synthesis,spectroscopic, thermal analyses,biological activity and molecular docking studies on mixed ligand complexes derived from Schiff base ligands and 2,6‐pyridine dicarboxylic acid

Two novel Schiff base ligands (L^a and L^b) were prepared from the condensation of quinoline 2‐aldehyde with 2‐aminopyridine (ligand L^a) and from the condensation of oxamide with furfural (ligand L^b). Mixed ligand complexes of the type M⁺²L^a/b L^c were prepared, where (L^a and L^b) the primary ligands and L^c was 2,6‐pyridinedicarboxylic acid as secondary ligand. Metal ions used were Fe(II), Co(II), Ni(II) and Zn(II) for mixed ligands L^a L^c and Fe(II), Co(II), Ni(II), Cu(II), Hg(II) and Zn(II) for L^bL^c mixed ligands. L^a and L^b Schiff base ligands were both characterized using elemental analyses, molar conductance, IR, ¹H and ¹³C NMR. Mass spectra for L^b, [Zn(L^a)L^cCl]Cl and [Cu(L^b)L^cCl]Cl were also studied. ESR spectrum of the [Cu(L^b) L^cCl]Cl complex was also recorded The metal complexes were synthesized and characterized using elemental analyses, spectroscopic (IR, ¹H NMR, UV‐visible, diffused reflectance), molar conductance, magnetic moment and thermal studies. The IR and ¹H NMR spectral data revealed that 2,6‐pyridinedicarboxalic acid ligand coordinated to the metal ions via pyridyl N and carboxylate O without proton displacement. In addition, the IR data showed that L^a and L^b ligands behaved as neutral bidentate ligands with N₂ donation sites (quinoline N and azomethine N for L^a and two azomethine N for L^b). Based on spectroscopic studies, an octahedral geometry was proposed for the complexes. The thermal stability and degradation of the metal complexes were investigated by thermogravimetric analysis. The binding modes and affinities of L^a, L^b and Zn(II) complexes towards receptors of crystal structure of E. coli (PDB ID: 3 t88) and mutant oxidoreductase of breast cancer (PDB ID: 3 hb5) receptors were also studied. The antimicrobial activity against two species of Gram positive, Gram negative bacteria and fungi were tested for the Schiff base ligands, 2,6‐pyridinedicarboxylic acid and the mixed ligand complexes and revealed that the synthesized mixed ligand complexes exhibited higher antimicrobial activity than their free Schiff base ligands.     

Synthesis,Characterization and Redox Properties of Three New <Emphasis Type="Italic">vic</Emphasis>-dioximes and their Nickel(II) Metal Complexes

Three novel vic-dioximes: cyclohexylamine-p-tolylglyoxime (L₁H₂), t-butylamine-p-tolylglyoxime (L₂H₂) and sec-butylamine-p-tolylglyoxime (L₃H₂) were prepared by the reaction of anti-p-tolylchloroglyoxime with cyclohexylamine, t-butylamine and sec-butylamine in absolute THF. The detection of H-bonding in all of the Ni(II) complexes by i.r. revealed the square-planar MN₄ coordination of mononuclear complexes. MN₄ coordination of the [(L₁H)₂Ni] complex was also determined by ¹H and ¹³C-n.m.r spectroscopy. Mononuclear complexes with a 1:2 metal-ligand ratio were prepared using Ni(II) salts. All Ni(II) complexes are insoluble in common solvents. The ligands and complexes were characterized by elemental analyses, FT-i.r., u.v.–vis., ¹H and ¹³C-n.m.r. spectra, magnetic susceptibility measurements, thermogravimetric analyses (t.g.a.) and cyclic voltammetry.     

Heteronuclear complexes of oxorhenium(V) with Fe(III), Co(II), Ni(II), Cu(II), Cd(II) and UO2(VI) and their biological activities

Heteronuclear complexes containing oxorhenium(V), with Fe(III), Co(II), Ni(II), Cu(II), Cd(II) and UO₂(VI) ions were prepared by the reaction of the complex ligands [ReO(HL¹)(PPh₃)(OH₂)Cl]Cl (a) and/or [ReO(H₂L²)(PPh₃)(OH₂)Cl]Cl (b), where H₂L¹?=?1-(2-hydroxyphenyl)butane-1,3-dione-3-(5,6-diphenyl-1,2,4-triazine-3-ylhydrazone) and H₃L²?=?1-(2-hydroxyphenyl)butane-1,3-dione-3-(1H-benzimidazol-2-ylhydrazone), with transition and actinide salts. Heterodinuclear complexes of ReO(V) with Fe(III), Co(II), Ni(II), Cu(II) and Cd(II) were obtained using a 1?:?1 mole ratio of the complex ligand and the metal salt. Heterotrinuclear complexes were obtained containing ReO(V) with UO₂(VI) and Cu(II) using 2?:?1 mole ratios of the complex ligand and the metal salts. The complex ligands a and b coordinate with the heterometal ion via a nitrogen of the heterocyclic ring and the nitrogen atom of the C=N⁷ group. All transition metal cations in the heteronuclear complexes have octahedral configurations, while UO₂(VI)?complexes have distorted dodecahedral geometry. The structures of the complexes were elucidated by IR, ESR, electronic and ¹H NMR spectra, magnetic moments, conductance and TG-DSC measurements. The antifungal activities of the complex ligands and their heteronuclear complexes towards Alternaria alternata and Aspergillus niger showed comparable behavior with some well-known antibiotics.     

Novel heteroligand complexes of Co(II), Cu(II), Ni(II) and Mn(II) formed by 2,2′-dipyridyl or 1,10-phenanthroline and phosphortriamide ligands: Synthesis and structure

This paper presents examples of mixed-ligand Co(II), Cu(II), Ni(II) and Mn(II) complexes, with a distorted octahedral coordination geometry, with 2,2′-dipyridyl or 1,10-phenanthroline and phosphortriamide ligands. The complexes of the general type ML₂·Lig (where M = Co(II), Cu(II), Ni(II), Mn(II); L⁻ = {Cl₃C(O)NP(O)R₂}⁻ (R = NHBz, NHCH₂CHCH₂, NEt₂); Lig = 2,2′-dipyridyl or 1,10-phenanthroline) were synthesised and characterised by means of X-ray diffraction, IR and UV–Vis spectroscopy. The phosphortriamide ligands are coordinated via oxygen atoms of phosphoryl and carbonyl groups involved in six-membered metal cycles. The additional ligands 2,2′-dipyridyl or 1,10-phenanthroline are coordinated to the central atom, forming five-membered cycles.     

Dissociation constants of some Schiff bases and stability constants of their copper,cobalt, nickel and zinc complexes

The stoichiometry and stability constant of metal complexes with 4-(3-methoxy-salicylideneamino)-5-hydroxynaphthalene-2,7-disulfonic acid monosodium salt (H₂L) and 4-(3-methoxysalicylideneamino)-5-hydroxy-6-(2,5-dichlorophenylazo)-2,7-naphthalene disulfonic acid monosodium salt (H₂L¹) were studied by potentiometric titration. The stability constants of H₂L and H₂L¹ Schiff bases have been investigated by potentiometric titration and u.v.–vis spectroscopy in aqueous media. The dissociation constants of the ligand and the stability constants of the metal complexes were calculated pH-metrically at 25 °C and 0.1 m KCl ionic strength. The dissociation constants for H₂L were obtained as 3.007, 7.620 and 9.564 and for H₂L¹, 4.000, 6.525, 9.473 and 10.423, respectively. The complexes were found to have the formulae [M(L)₂] for M = Co(II), Ni(II), Zn(II) and Cu(II). The stability of the complexes follows the sequence: Zn(II) < Co(II) < Cu(II) < Ni(II). The high stability of H₂L¹ towards Cu(II) and Ni(II) over the other ions is remarkable, in particular over Cu(II), and may be of technological interest. Concentration distribution diagram of various species formed in solution was evaluated for ligands and complexes. The formation of the hydrogen bonds may cause this increased stability of ligands. The pH-metric data were used to find the stoichiometry, deprotonation and stability constants via the SUPERQUAD computer program.     

Polymeric and monomeric dipicolinate complexes with 4-hydroxymethyl pyridine: spectral, structural, thermal and electrochemical characterization

Polymeric copper(II), [Cu(μ-dpc)(μ-4-hymp)] _n (1), and monomeric nickel(II), [Ni(dpc)(4-hymp)(H₂O)₂]·H₂O (2), (dpc: dipicolinate, 4-hymp: 4-hydroxymethyl pyridine), dipicolinate complexes have been prepared and characterized by spectroscopic (IR, UV–Vis, EPR), thermal (TG/DTA), X-ray diffraction technique and electrochemical methods. In both the dipicolinate complexes, the dpc dianion acts as a tridentate ligand. In polymeric copper(II) complex, the 4-hymp and dpc ligands adopt a bridging position between the Cu(II) centers, forming the elongated octahedral geometry. The polymeric chains are linked to one another via O–H···O hydrogen bond interactions, forming the 3-D polymeric structure. The Ni(II) ion is bonded to dpc ligand through pyridine N atom together with one O atom of each carboxylate group, two aqua ligands and N pyridine atom of 4-hymp, forming the distorted octahedral geometry. The Ni(II) complexes are connected to one another via O–H···O hydrogen bonds, forming R ₄²(18) motifs in 2-D pattern. The powder EPR spectra of copper(II) complex have indicated that the paramagnetic center is in rhombic symmetry with the Cu²⁺ ion having distorted octahedral geometry. IR and UV–Vis spectroscopes all agree with the observed crystal structure.     

Dioxouranium Complexes with Acetylpyridine Benzoylhydrazones and Related Ligands

Acetylpyridine benzoylhydrazone and related ligands react with common dioxouranium(VI) compounds such as uranyl nitrate or [NBu₄]₂[UO₂Cl₄] to form air‐stable complexes. Reactions with 2, 6‐diacetylpyridinebis(benzoylhydrazone) (H₂L^1a) or 2, 6‐diacetylpyridinebis(salicylhydrazone) (H₂L^1b) give yellow products of the composition [UO₂(L¹)]. The neutral compounds contain doubly deprotonated ligands and possess a distorted pentagonal‐bipyramidal structure. The hydroxo groups of the salicylhydrazonato ligand do not contribute to the complexation of the metal. The equatorial coordination spheres of the complexes can be extended by the addition of a monodentate ligand such as pyridine or DMSO. The uranium atoms in the resulting deep‐red complexes have hexagonal‐bipyramidal coordination environments with the oxo ligands in axial positions. The sterical strains inside the hexagonal plane can be reduced when two tridentate benzoylhydrazonato ligands are used instead of the pentadentate 2, 6‐diacetylpyridine derivatives. Acetylpyridine benzoylhydrazone (HL²) and bis(2‐pyridyl)ketone benzoylhydrazone (HL³) deprotonate and form neutral, red [UO₂(L)₂] complexes. The equatorial coordination spheres of these complexes are puckered hexagons. X‐ray diffraction studies on [UO₂(L^1a)(pyridine)], [UO₂(L^1b)(DMSO)], [UO₂(L²)₂] and [UO₂(L³)₂] show relatively short U—O bonds to the benzoylic oxygen atoms between 2.328(6) and 2.389(8) Å. This suggests a preference of these donor sites of the ligands over their imino and amine functionalities (U—N bond lengths: 2.588(7)—2.701(6) Å ).     

Synthesis and characterization of a new vic -dioxime 6,7- bis (hydroxyimino)-9,10-diethylidine-5,8,9,10,11,18-hexahydro-5,8,11,18-tetraazadibenzo[a,e]cyclotetradecane-6,7,12,17-tetraone and its nickel and cobalt complexes

A new vic-dioxime 6,7-bis(hydroxyimino)-9,10-diethylidine-5,8,9,10,11,18-hexahydro-5,8,11,18-tetraazadibenzo[a,e]cyclotetradecane-6,7,12,17-tetraone (H₂L) and its hydrogen-bridged tetra- and six-coordinate complexes with Ni(II), Co(II), and Co(III) have been synthesized. The six-coordinate complexes of H₂L have pyridine and chloride as axial ligands. Hydrogen-bridge complexes were converted to their BF₂-bridged analogues by reaction with boron trifluoride etherate. Structures of the H₂L and its complexes were proposed from elemental analysis, ¹H and ¹³C NMR, IR and mass spectra.     

Synthesis and characterization of mononuclear cadmium(II) and dinuclear uranyl(VI) complexes with <Emphasis Type="Italic">vic</Emphasis>-dioximes

In this study, the mononuclear complexes of cadmium(II) and dinuclear complexes of uranyl(VI) with five vic-dioximes have been obtained. Cadmium(II) forms, with ligands, complexes [(L ^xH)(Cl)(H₂O)(Cd)] with x=1–5. Mononuclear complexes with a metal: ligand ratio of 1:1 were obtained for cadmium(II) with the ligands, and a chloride ion and a water molecule are also coordinated to the cadmium(II) ions. Uranyl(VI) complexes of these ligands are a dinuclear structure with μ-hydroxo-bridges. Uranyl(VI) forms, with ligands, complexes [(L^xH)₂(OH)₂(UO₂)₂] with x=1–5, which have a 2:2 metal:ligand ratio. The structures of the complexes were identified by elemental analysis, i.r., and ¹H-n.m.r. spectra, u.v.–vis. spectroscopy, magnetic susceptibility measurements, conductivity measurements and thermogravimetric analysis (t.g.a.).     

Oxidative Dehydrogenation in Complexes of Transition Metals (Cu(II), Co(II), Ni(II)) with N,N"-Di(2-Hydroxybenzyl)diamines

Potentially tetradentate ligands N,N"-di(2-hydroxybenzyl)ethylenediamine (L¹) and N,N"-di(2-hydroxybenzyl)o-phenylenediamine (L²) and complexes of Cu(II), Co(II), and Ni(II) with L¹and L²were synthesized. The EPR and electronic spectroscopy methods were used to reveal the octahedral structure of the Cu(II) complex with L¹in the solid state. In water–alcohol solutions, the Cu(II) and Ni(II) complexes with both ligands have distorted octahedral structures. The Co(II) complexes form dioxygen adduct with L¹. In the presence of oxygen, the ligands in the obtained complex compounds can undergo oxidative dehydrogenation with selective formation of the respective disalicylaldimines. In the case of L², the oxidative dehydrogenation is observed for the complexes of all studied metals in comparatively mild conditions (T= 30°C, methanol and other solvents), while in the case of L¹, it occurs only with the Co(II) complexes in the presence of pyridine.     

Tetranuclear Zn(II) and Mononuclear Nickel(II) Complexes Based on Asymmetric Salamo-Type Ligands: Syntheses,Crystal Structures,and Fluorescent Properties

Two new complexes [{Zn(L¹)(μ-OAc)Zn(CH₃CHOHCH₃)}₂] and [Ni(L₂)(H₂O)(CH₃OH)] with asymmetric Salamo-type ligands (H₃L¹ and H₂L²) are synthesized and structurally characterized. In the Zn(II) and Ni(II) complexes, the terminal and central Zn(II) atoms are found to have slightly distorted square pyramidal and trigonal bipyramidal symmetries respectively, while the Ni(II) atom is hexa-coordinated and has a slightly distorted octahedral symmetry. Interestingly, a self-assembling continual zigzag 1D chain is formed by intermolecular hydrogen bonds in the Ni(II) complex. Furthermore, the Zn(II) and Ni(II) complexes in the ethanol solution show intense photoluminescence.     

Preparation,structures, and properties of nickel complexes containing 2,6-bis[4′,4′-dimethyloxazolin-2′-yl]pyridine,a pincer ligand

Five- and six-coordinate nickel complexes [(Dm-Pybox)NiCl₂], [(Dm-Pybox)Ni(H₂O)Cl₂], [(Dm-Pybox)Ni(H₂O)₂Cl]Cl (2a), and [(Dm-Pybox)Ni(MeOH)₂Cl]Cl (2b), where Dm-Pybox is 2,6-bis[4′,4′-dimethyloxazolin-2′-yl]pyridine, have been isolated and structurally characterized by single crystal X-ray diffraction. The solid state structures of 2a and 2b feature different modes of non-covalent interactions, C–H?Cl, C–H?O and O–H?Cl interactions. Spectroscopic and analytical methods, UV–vis and thermogravimetric analyses were done to further investigate chemical properties of the complexes.     

Synthesis of uranium complexes incorporating extended azo-imine ligands: Molecular and electronic structure

The new azo-imine ligands 2,4-di-tert-butyl-6-((2-((2-hydroxyphenyl)diazenyl) phenylimino)methyl)phenol, H₂L¹, 1a, and 2,4-di-tert-butyl-6-((2-((2-hydroxyphenyl) diazenyl)p-chlorophenylimino)phenol, H₂L², 1b, were prepared. Reaction of H₂L¹;1a, and H₂L²;1b, with uranyl nitrate hexahydrate afforded the mononuclear complexes of compositions [U(O)₂(L¹)(H₂O)]; 2a, and [U(O)₂(L²)(H₂O)]; 2b, complexes respectively. The newly synthesised ligands (1a and 1b) and the complexes (2a and 2b) were characterised unequivocally. The x-ray structure of 2a was determined. The tetradentate dianionic ligand (L¹)^2- coordinated the uranium ion equatorially with a water molecule in the same plane. Two axially coordinated oxo ligands completed the overall pentagonal bipyramid geometry around U(VI) ion. Structural pattern, electron transfer properties (oxidation near 1.32 ​V vs Ag/AgCl) and electronic transitions of [U(O)₂(L¹)(H₂O)]; 2a, and [U(O)₂(L²)(H₂O)]; 2b have been rationalized by DFT calculations.     

Synthesis,characterization, and histological activity of novel polydentate azo ligands and their cobalt(II), copper(II) and nickel(II) complexes

We describe the synthesis and characterization of two novel azo ligands, 4,5-dihydroxy-3,6-bis(2-hydroxyphenylazo)-2,7 naphthalene disulfonic acid (H₂L) and 4,5-dihydroxy-3,6-bis(2-hydroxy-4-sulfophenylazo)-2,7-naphthalenedisulfonic acid (H₂L¹). The Cu(II), Ni(II), and Co(II) complexes of these ligands were prepared and characterized by infrared, UV–Vis, ¹H- and ¹³C-NMR spectra, atomic absorption spectroscopy, mass spectrometry, elemental analyses, thermogravimetric analysis, conductivity, cyclic voltammetry, and magnetic measurements. The results suggest that the complexes have a 2:1 (metal:ligand) molar ratio, involving binuclear azo ligands with an ONO donor set. Metal ion uptake studies were conducted with a batch technique. Preliminary histological studies were also made. The results indicate that the azo ligands have high thermal stability, good metal extraction capacity, and favorable dying properties with certain tissues.     

Synthesis and physiochemical studies on binuclear Cu(II) complexes derived from 2,6-[(N-phenylpiperazin-1-yl)methyl]-4-substituted phenols

Preparation of the ligands HL¹ = 2,6-[(N-phenylpiperazin-1-yl)methyl]-p-ethylphenol; HL² = 2,6-[(N-phenylpiperazin-1-yl)methyl]-p-methoxyphenol and HL³ = 2,6-[(N-phenylpiperazin-1-yl)methyl]-p-nitrophenol are described together with their Cu(II) complexes with different bridging units. The exogenous bridges incorporated into the complexes are: hydroxo [Cu₂L(OH)(H₂O)₂](ClO₄)₂.H₂O (L¹=1a, L² =1b, L³ =1c), acetato [Cu₂L(OAc)₂]ClO₄.H₂O (L¹ =2a, L² =2b, L³ =2c) and nitrito [Cu₂L¹(NO₂)₂(H₂O)₂]ClO₄.H₂O (L¹=3a, L² =3b, L³ =3c). Complexes1a,1b,1c and2a,2b,2c contain bridging exogenous groups, while3a,3b,3c possess only open μ-phenolate structures. Both the ligands and complexes were characterized by spectral studies. Cyclic voltammetric investigation of these complexes revealed that the reaction process involves two successive quasireversible one-electron steps at different potentials. The first reduction potential is sensitive to electronic effects of the substituents at the aromatic ring of the ligand system, shifting to positive potentials when the substituents are replaced by more electrophilic groups. EPR studies indicate very weak interaction between the two copper atoms. Various covalency parameters have been calculated.     

Synthesis and characterization of new (<Emphasis Type="Italic">E,E</Emphasis>)-dioximes and their divalent metal complexes

Two new soluble vic-dioxime ligands, 4-isopropylanilineglyoxime (L¹H₂) and 4-benzylpiperidineglyoxime (L²H₂) were prepared by reacting 4-isopropylaniline and 4-benzylpiperidine with anti-chloroglyoxime. Ten metal complexes were obtanied by reacting both ligands with Cu(II),Ni(II),Co(II), Zn(II), and Cd(II) cations. The ligands and their metal complexes were elucidated by elemental analysis, IR, UV-vis, ¹H NMR, and ¹³C NMR and also magnetic moments of the complexes were determined. The text was submitted by the authors in English.     

Preparation and Characterization of Novel Asymmetrical Schiff-Base Ligands Derived from 2-methyl-7-formyl-8-hydroxyquinoline and their Metal Complexes

Two novel asymmetrical Schiff-base ligands, H₂L¹ and H₂L², were prepared by reacting two half-unit Schiff-base compounds with 2-methyl-7-formyl-8-hydroxyquinoline. The two half-unit Schiff-base compounds were initially prepared by condensing dimedone with either ethylenediamine or p-phenylenediamine, respectively. Both ligands are dibasic and contain two sets of NO coordinating sites. Twelve metal complexes were obtained by reacting both ligands with Cu(II), Ni(II), Co(II), Mn(II), Fe(III), VO(IV) cations. The ligands and their metal complexes were characterized by elemental analysis, IR, UV-Vis, ESR and mass spectra, also magnetic moments of the complexes were determined. Visible spectra of the complexes indicated distorted octahedral geometries around the metal cations. ESR spectra indicated mononuclear and dinuclear structures of the complexes of ligands H₂L¹ and H₂L², respectively. Magnetic moments of the complexes were rather low compared with those expected for octahedral geometries and indicated polymeric linkage of the metal complex molecules within their crystal lattices. The insolubility of the metal complexes in most organic solvents support the polymeric structures.     

Copper(I) and copper(II) complexes of diamino-dithioether ligands

Summary Copper(II) salts were reacted with two diamino-dithioether ligands, i.e. 1,3-di(o-aminophenylthio)propane (abbreviated H₂L¹) and 1,2-di(o-aminophenylthio)xylene (abbreviated H₂L²). Mixtures of copper(I) and copper(II) complexes were obtained with Cl^– and ClO ₄ ^– counterions. The major products were the copper(I) complexes, which were obtained pure after recrystallisation from MeCN-MeOH. The ligands lose two protons from the amine functions to form copper(I) complexes of general formula [CuL]X, where X = ClO ₄ ^– or Cl^–. The complexes were oxidised to [CuL]X₂ with H₂O₂ in DMF. Cu(NO₃)₂ on the other hand gave [CuH₂LNO₃]NO₃.     

Synthesis, spectroscopic and theoretical studies of two novel tripodal imine-phenol ligands and their complexation with Fe(III)

Two novel tripodal imine-phenol ligands, cis,cis-1,3,5-tris{(2-hydroxybenzilidene)aminomethyl}cyclohexane (TMACHSAL, L¹) and of cis,cis-1,3,5-tris{[(2-hydroxyphenyl)ethylidene]aminomethyl}cyclohexane (Me₃-TMACHSAL, L²) have been synthesized and characterized by elemental analyses and various spectral (UV–vis, IR and ¹H and ¹³C NMR) data. The complexation reactions of the ligands with H⁺ and Fe(III) were investigated by potentiometric and spectrophotometric methods at an ionic strength of 0.1 M KCl and 25 ± 1 °C in aqueous medium. Three protonation constants each for ligands L¹ and L² were determined and were used as input data to evaluate the formation constants of the metal complexes. Formations of metal complexes of the types FeLH₃, FeLH₂, FeLH, FeL and FeLH₋₁ were depicted in solution. Experimental evidences suggested for a formation of tris(iminophenolate) type metal complex by the ligands. The ligand L¹ showed higher affinity towards iron(III) than L². The pFe value related to L¹ (pFe = 20.14) is approximately four units higher than L² (pFe = 16.41) at pH = 7.4. The structures of the metal complexes were proposed through the molecular mechanics calculation using MM3 force field followed by semi-empirical PM3 method.