聚氨酯改性TDE-85/ MeTHPA环氧树脂的力学性能研究

采用自制的聚氨酯预聚体(PUP)制备聚氨酯(PU)改性TDE-85/ MeTHPA环氧树脂体系,探讨了聚醚二元醇(PPG)分子量的大小、PUP加入量等因素对PU改性TDE-85/ MeTHPA环氧树脂体系力学性能的影响。研究结果表明,PU改性TDE-85/ MeTHPA环氧树脂的拉伸强度和冲击强度随着合成的PUP加入量的增加先呈上升趋势,达到最大值后又开始下降。采用的PPG分子量不同,得到的改性材料的力学性能相差悬殊。当PPG分子量为1 000,PUP质量分数为15%时,改性材料的拉伸强度达到69.39 MPa,冲击强度达到23.56 kJ/m2,力学综合性能显著提高。     

聚氨酯改性TDE-85/ MeTHPA树脂的固化反应机理及动力学研究

以聚醚二元醇、甲苯二异氰酸酯为原料,合成了聚醚型聚氨酯预聚体(PUP)。采用该预聚体、扩链剂1,4-丁二醇、交联剂三羟甲基丙烷对TDE-85/甲基四氢邻苯二甲酸酐（MeTHPA)环氧树脂体系进行改性,通过示差扫描量热法与红外光谱法分析,探讨了聚氨酯(PU)改性环氧树脂体系固化反应机理及固化反应动力学特征。固化反应机理研究表明,TDE-85与MeTHPA之间的固化反应形成环氧聚合物网络Ⅰ,1,4-丁二醇及三羟甲基丙烷同PUP进行了扩链、交联反应形成了PU聚合物Ⅱ。异氰酸酯基同环氧基反应,使得聚合物Ⅰ与聚合物Ⅱ形成了接枝化学键。固化反应动力学研究表明,PU的加入可明显降低环氧树脂固化反应的表观活化能,活化能由TDE-85/MeTHPA树脂体系时的83.14 kJ/mol降至PU改性后的67.91 kJ/mol。     

聚氨酯改性TDE-85/MeTHPA树脂的固化反应机理及动力学研究

 以聚醚二元醇、甲苯二异氰酸酯为原料,合成了聚醚型聚氨酯预聚体(PUP)。采用该预聚体、扩链剂1,4-丁二醇、交联剂三羟甲基丙烷对TDE-85/甲基四氢邻苯二甲酸酐（MeTHPA)环氧树脂体系进行改性,通过示差扫描量热法与红外光谱法分析,探讨了聚氨酯(PU)改性环氧树脂体系固化反应机理及固化反应动力学特征。固化反应机理研究表明,TDE-85与MeTHPA之间的固化反应形成环氧聚合物网络Ⅰ,1,4-丁二醇及三羟甲基丙烷同PUP进行了扩链、交联反应形成了PU聚合物Ⅱ。异氰酸酯基同环氧基反应,使得聚合物Ⅰ与聚合物Ⅱ形成了接枝化学键。固化反应动力学研究表明,PU的加入可明显降低环氧树脂固化反应的表观活化能,活化能由TDE-85/MeTHPA树脂体系时的83.14 kJ/mol降至PU改性后的67.91 kJ/mol。     

ATR-FTIR研究超支化聚酯对PEG型聚氨酯弹性体的力学性能及形态的影响

为改善聚乙二醇(PEG)型聚氨酯弹性体的力学性能,将改性超支化聚酯(HBP)引入形成共混体系,利用衰减全反射傅里叶变换红外光谱(ATR-FTIR)研究了聚氨酯胶片的化学结构.结果表明,超支化聚酯对PEG型聚氨酯弹性体具有较好的增强增韧作用,当加入0.4%的第三代超支化聚酯时,聚氨酯弹性体的拉伸强度比空白胶片提高了2.5...     

缩水甘油胺型聚氨酯胶粘剂的性能研究北大核心CSCD

采用商品化SKE-1型环氧树脂对自制聚氨酯预聚体(NCOPU)进行封端,制备了缩水甘油胺型聚氨酯(GAPU),并用傅里叶-红外光谱(FT-IR)对其结构进行表征,用在线FT-IR监控间苯二甲胺固化GAPU过程,用差示量热扫描(DSC)研究其相分离,用扫描电镜(SEM)观察固化物的表面微观形貌,用热重(TG)分析固化物的热力学稳定性。探讨了聚丙二醇(PPG)分子量的大小、不同质量分数的SKE-1对NCOPU封端及不同种类的固化剂对GAPU固化物力学性能的影响。研究表明:在60℃时用间苯二甲胺固化GAPU,2h即可固化完全,固化物热稳定性能良好,其外推起始分解温度为248.3℃,5%的分解温度为282.6℃。GAPU固化物的力学性能随着GAPU的环氧值减小而减小,在室温以上力学性能下降,在-196℃力学性能增加,其环氧值为0.153,在-196℃的拉伸剪切强度最佳,为16.11MPa。     

低浓度氧化石墨烯改性环氧树脂基碳纤维层合板的拉伸性能

将氧化石墨烯(GO)均匀分散到环氧树脂(EP)中,采用真空辅助树脂传递模塑成型的工艺方法制备增强碳纤维(CF)复合材料,研究常温下不同浓度(质量分数为0、0.03%、0.07%和0.10%)GO改性EP/CF层合板的抗拉性能和微观胶联性能,探究低浓度GO对CF增强复合材料力学性能明显改善的阈值。实验结果表明:GO对CF增强环氧复合材料的性能有明显改善作用,与纯环氧基CF层合板相比,随着GO浓度增加,其抗拉性能随之增强;GO官能团可以提高EP基体与CF的结合程度,通过扫描电镜观察到加入GO的层合板中CF与EP的黏结更加紧密,使得啮合效果更强,从而提高了复合材料层合板的拉伸强度;低浓度GO改性下,当GO的质量分数达到0.07%时,层合板的力学性能得到明显改善。     

环氧树脂对封端型水性聚氨酯树脂的改性研究

以聚醚多元醇、甲苯二异氰酸酯和二羟甲基丙酸为主要原料,丙烯酸单体封端,加入改性剂环氧树脂E-44,制备出稳定的水性聚氨酯分散体.红外光谱分析表明反应得到了水性聚氨酯结构;随着环氧树脂含量的增加,水性聚氨酯树脂粒径,黏度逐渐增大,乳液贮存稳定性下降,低温柔韧性变差,吸水率逐渐减小;甲基丙烷酸羟乙酯(HEMA)作为封端剂水性聚氨酯乳液高温稳定性优于季戊四醇三丙烯酸酯(PETA)封端剂乳液;环氧树脂改性增加了水性聚氨酯树脂的热稳定性.     

碳纳米管/环氧树脂复合薄膜力学性能的支持向量回归预测

根据实验测得环氧树脂不同体积浓度浸泡液下的碳纳米管/环氧树脂复合薄膜的力学性能的实验数据,应用基于粒子群算法(PSO)寻优的支持向量回归(SVR)方法,建立了不同实验参数对复合薄膜力学性能影响的预测模型。留一交叉法(LOOCV)结果表明环氧树脂体积分数与复合薄膜力学性能之间关系复杂,呈现高度的非线性。表征力学性能的拉伸强度σ_b(MPa)、延伸率δ(%)和弹性模量E(GPa)的平均绝对百分误差分别为3.96%,3.14%和2.62%,相关系数(R~2)分别高达0.991,0.990和0.997。该方法不仅准确预测了双壁碳纳米管与环氧树脂复合薄膜的力学性能,而且为实验工作者研究实验参数与力学性能之间关系提供了理论指导。     

环氧树脂玻璃钢的动静态拉伸力学特性

为系统地研究环氧树脂玻璃钢在静、动态拉伸载荷作用下的力学性能，采用材料测试系统和分离式霍普金森拉杆对材料进行拉伸试验，获得0.001～0.1 s^-1及1 128～1 840 s^-1应变率下的应力-应变曲线和相应的力学参数。结果表明，动态加载下环氧树脂玻璃钢的应变率增强效应较为明显。为此，引入动态增强因子描述环氧树脂玻璃钢在高应变率下力学性能的增强。采用扫描电镜对损伤断面进行观测，发现动态加载下纤维束平整断裂，而非静态加载下纤维拔出失效。相较于静态加载，动态拉伸载荷作用下玻璃钢的基体-纤维界面断裂韧度更高。基于环氧树脂玻璃钢在动态拉伸下的力学响应，引入宏观损伤累积量，建立一种考虑损伤的非线性拉伸本构模型。拟合结果表明，该模型整体上可以反映环氧树脂玻璃钢在动态拉伸载荷作用下的力学响应。     

PYX基高聚物粘结炸药界面相互作用及力学性能的分子动力学模拟

本文采用分子动力学(MD)方法,模拟计算了聚氨酯(Estane 5703),三元乙丙橡胶(EPDM),氟聚物(F2311)三种高聚物分子分别与2,6-双(苦氨基)-3,5-二硝基吡啶(PYX)(011)晶面构建的高聚物粘结炸药(PBXs)体系的结合能,内聚能密度,径向分布函数以及力学性能.结果表明,Estane 5703与PYX(011)晶面之间相互作用最强;不同粘结剂与晶体之间的内聚能密度大小顺序为PYX/F2311> PYX/Estane 5703> PYX/EPDM;径向分布函数分析可知PYX(011)晶面与高聚物分子间的相互作用主要为静电相互作用;添加3种粘结剂后PBX体系的拉伸强度和断裂强度都得到了改善,而除了F2311外,加入另外两种粘结剂后,提高了PBX体系的抗剪切应变能力.     

Physical properties of a high molecular weight hydroxyl-terminated polydimethylsiloxane modified castor oil based polyurethane/epoxy interpenetrating polymer network composites

A series of polyurethane (PU)/epoxy resin (EP) graft interpenetrating polymer network (IPN) composites modified by a high molecular weight hydroxyl-terminated polydimethylsiloxane (HTPDMS) were prepared. The effects of HTPDMS content on the phase structure, damping properties and the glass transition temperature (Tg) of the HTPDMS-modified PU/EP IPN composites were studied by scanning electron microscopy (SEM) and dynamic mechanical analysis (DMA). Thermogravimetric analysis (TGA) showed that the thermal decomposition temperature of the composites increased with the increase of HTPDMS content. The tensile strength and impact strength of the IPN composites were also significantly improved, especially when the HTPDMS content was 10%. The modified IPN composites were expected to be used as structural damping materials in the future.     

Studies on interface in polyester/fly-ash particulate composites

Fly ash (FA)-general purpose unsaturated polyester resin (GPR) particulate composites have been made. The effect of surface treatment of FA with two different silane coupling agents (CAs) on the mechanical properties like tensile, flexural, impact strength and hardness, thermal properties like thermal stability and morphological properties (SEM) of FA-GPR composites are studied. The properties of FA-CA-GPR are also compared with that of GPR and CaCO₃ -GPR. An enhancement in the tensile, flexural, and impact strength and moduli are observed when FA is surface treated with CA. Hardness is also found to increase with CA-treated FA-filled GPR. A suitable mechanism for the chemical reaction taking place at the interface in the presence of CAs is proposed.     

Study on the Structure and Properties of UHMWPE/Epoxy Resin Composite Fiber

The preparation, crystallization behavior, and fiber structure and properties of ultrahigh molecular weight polyethylene (UHMWPE) epoxy resin composite fiber were studied by means of differential scanning calorimeter (DSC), X‐ray diffraction (XRD), Scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and tensile testing. The morphology showed a different behavior from pure polyethylene (PE) fiber. The fiber mechanical properties, creep behavior, and thermal properties of UHMWPE fiber can be improved by adding epoxy resin. It's believed that the epoxy can serve as a physical cross‐linking agent to limit the motion or migration of PE molecules and consequently improve the fiber creep property. However, when the content of epoxy resin is higher than 5 wt%, all of the behavior and properties deteriorate.     

Physical Properties of Micro Hollow Glass Bead Filled Castor Oil-Based Polyurethane/Epoxy Resin IPN Composites

A series of micro hollow glass beads (HGB) filled castor oil-based polyurethane/epoxy resin graft interpenetrating polymer network (IPN) composites were prepared. The tensile and impact strengths, impact fractured surfaces, damping properties and thermal stability of the IPN composites were studied systematically in terms of composition. Results revealed that the addition of HGB into polyurethane/epoxy IPN can significantly improve not only the tensile strength but also the impact strength. The tensile strength was increased by 61% and at the same time the impact strength was increased by 25% when the HGB content was 1.5%. The damping properties were better than the composition of 0.5% or 2% HGB content when the HGB content was 1% or 1.5%. The thermal decomposition temperature was also slightly improved by the incorporation of HGB. It is suggested that the HGB reinforced polyurethane/epoxy resin IPN composites could be used as structural damping materials.     

PTFE/Al反应材料的力学性能研究

 反应材料是一种由冲击引发的新型含能材料,对其力学性能的研究是其广泛应用的一个重要前提。在室温下,利用万能试验机和改进的摆锤冲击试验机对聚四氟乙烯/铝（PTFE/Al）系列反应材料的拉伸和冲击性能进行了实验研究。随着Al含量的增加,反应材料的密度和燃烧热升高,拉伸强度呈先升高后降低的趋势,在Al含量为6%左右时达到最大值36.1 MPa,与计算结果较符合。推测反应材料的损伤过程为变形、开裂和反应3步。Al含量的增加导致反应材料试样的冲击韧性先升高后降低,在Al含量为40%左右时达到最大值72.06 J/cm²。随着Al含量的增加,材料的反应难度增加,反应自持性降低。     

Effect of an Ultrahigh Rubber ABS Impact Modifier Resin on Mechanical Properties of Intumescent Flame-Retardant ABS Composites

The effect of an ultrahigh rubber acrylonitrile-butadiene-styrene (ABS) impact modifier resin (UHR-ABS) on the mechanical properties of an intumescent flame-retardant ABS composite was characterized. Samples were obtained by compounding ABS and an intumescent flame-retardant master batch that was prepared using an intumescent flame-retardant composite (IFRC) with ABS and/or UHR-ABS as well as by direct compounding IFRC, UHR-ABS, and ABS. The incorporation of UHR-ABS resulted in reduction in the storage modulus, damping behavior and glass transition temperature, as evidenced by dynamic mechanical analysis. With increasing mass fraction of the UHR-ABS, the tensile strength and the flexural strength decreased gradually, and the notched impact strength increased, but the increase was more significant for compounding IFRC, UHR-ABS, and ABS than for compounding ABS and IFRC master batches. SEM micrographs of the fresh fracture surface of the composites were used to estimate the mechanism of the increased notched impact strength owing to the incorporation of UHR-ABS.     

High-performance aromatic polyimide fibers. 6. Structure and morphology changes in compressed BPDA-DMB fibers

A high-performance aromatic polyimide fiber has been spun from a high molecular weight polyimide synthesized from 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) and 2,2′-dimethyl-4,4′-diaminobiphenyl (DMB). The fiber exhibits not only excellent tensile properties and high temperature resistance but also a high compressive strength of 655 MPa. Morphological observations of BPDA-DMB fibers indicate that the fiber shows a skin-core structure and microfibrillar textures. A banded texture can also be found with a spacing of about 2μm, which may be introduced by the liquid crystalline behavior that appears during processing. Compressed BPDADMB fibers form kink and microkink bands over different size scales. The detailed formation mechanism of these banded textures is discussed. The structure parameter changes during compression-including crystal unit cell parameters, apparent crystallinity, crystal and overall orientation, and apparent crystallite sizes-are monitored. It is found that after restretching, the crystal and overall orientation is almost fully recovered while the apparent crystallinity is not recoverable. The structural changes during compression are critically associated with the loss of macroscopic mechanical property in the fibers.