Repeatability and reproducibility of retention data and band profiles on reversed-phase liquid chromatography columns. III. Results obtained with Kromasil C18 columns.

The reproducibility of the retention data and the band profiles was investigated with Kromasil C18 columns (silica-based monomeric type reversed-phase packing material). High precision data were obtained and statistically compared among five columns from the same batch (column-to-column reproducibility) and six columns, one from each of six different batches (batch-to-batch reproducibility). These data were acquired under five different sets of chromatographic conditions, for a group of 30 neutral, acidic and basic compounds selected as probes following an experimental protocol previously described. Data characterizing the retention time, the retention factor, the separation factor, the column efficiency and the peak asymmetry for the different probe compounds are reported. Factors describing the silica surface interaction with the selected probe compounds, such as the hydrophobic interaction selectivity, the steric selectivity, and the separation factors of basic compounds at different pH values were also determined. The influence of the underlying silica on these data and correlations between the chromatographic and physico-chemical properties of the different batches are discussed.     

Repeatability and reproducibility of retention data and band profiles on reversed-phase liquid chromatography columns. IV. Results obtained with Luna C18 (2) columns

The reproducibility of retention data and band profile characteristics was investigated for a series of columns packed with Luna C18 (2), a silica-based, reversed-phase adsorbent. High precision data were obtained and statistically compared among five columns from the same batch (column-to-column reproducibility) and nine columns from as many different batches (batch-to-batch reproducibility). These data were acquired under five different sets of chromatographic conditions, for a group of 30 neutral, acidic, and basic compounds selected as probes following an experimental protocol previously described. This work is part of a study on the precision of chromatographic analyses. Its purpose is to illustrate the contribution of the stationary phase reproducibility to this precision.     

Reproducibility of the separation of astaxanthin stereoisomers on Pirkle covalent L-leucine and D-phenylglycine columns.

The reproducibility of the separation of astaxanthin stereoisomers on columns packed with Pirkle covalent L-leucine chiral stationary phase (CSP) was examined by comparing six columns purchased from the same manufacturer. Differences were found even for columns packed with CSP from the same lot. The reproducibility of columns packed with Pirkle covalent D-phenylglycine CSP was also examined by comparing columns purchased from the same manufacturer as well as from different manufacturers. Significant differences were found for columns packed by different manufacturers. Chiral column-to-column reproducibility for complex stereoisomeric separations should therefore not be taken for granted.     

Behavior of packing materials in axially compressed chromatographic columns

The behavior of a packing material (Luna C18 from Phenomenex, Torrance, CA, USA) was studied during the consolidation of a column bed under axial compression stress. The kinetics of this consolidation, the permeability and efficiency of the columns obtained, and the reproducibility of these column properties were measured under different conditions. The consolidation process and the column properties are considerably affected by the friction between the packing material in the bed and the column wall. Clear evidence of this wall effect was demonstrated. The apparent permeability of columns consolidated under the same axial stress increases with increasing column length. The apparent modulus of elasticity of the beds increases with increasing column length. The shear resistance between the packed bed and the column wall was measured for columns of different lengths. It increases rapidly with increasing bed length. The column efficiency for thiourea (unretained) and phenyloctane (retention factor, k' approximately 1) was much poorer after recompression than after the first compression. It depended little on the compression stress. The effect of the column length was small.     

Gas-chromatographic retention indices in dependence on the ratio of analytes to reference components

One of the main factors determining the interlaboratory reproducibility of gas-chromatographic retention indices is their linear dependence on the logarithms of the ratios of the amounts of analytes and reference components, which is rarely taken into account. It is found that the effect of this factor is much stronger for packed columns in comparison to that for more efficient capillary columns; it decreases with the sample dilution and with the increase in the temperature of gas-chromatographic separation. It was shown that the effect of relative amounts of components on their retention indices agrees with the main principles of the chromatographic plate theory and is associated with neither the overloading of chromatographic columns nor the nonlinearity of the adsorption isotherms. To improve the reproducibility of indices, it is recommended to use retention parameters measured at certain points in the front edges of the chromatographic peaks corresponding to similar intensities of the analytical signal rather than at the peak maxima.     

Repeatability and reproducibility of retention data and band profiles on six batches of monolithic columns

Chromatographic data were acquired for eight different mixtures, under five different sets of experimental conditions, for a total of 30 neutral, acidic and basic test compounds, on a series of six Chromolith Performance columns from Merck. These columns are made of a C₁₈ chemically bonded silica monolith. Each column belonged to a different production batch, so the data reported here characterize their batch-to-batch reproducibility. The parameters studied in this work were the retention times, the retention and separation factors, the hydrophobic and the steric selectivities, the column efficiencies, and the tailing factors for all 30 compounds.     

一种多通道匀浆装填毛细管色谱柱的新装置及应用

针对目前毛细管色谱柱装柱效率低、不同批次装填的毛细管色谱柱之间性能差异大的问题,我们发展了一种多通道匀浆装填毛细管色谱柱的新装置。该装置以液相色谱泵提供压力、采用磁力搅拌保持匀浆液均匀分散,一次可装填多达6根毛细管色谱柱。以牛血清白蛋白(BSA)的胰蛋白酶酶切肽段混合物为样本,选择峰容量、蛋白覆盖率、3个特定离子的保留时间以及毛细管色谱柱柱压为指标,在毛细管液相色谱-质谱联用系统上对装填的反相毛细管色谱柱的性能进行了评价。分别考察了一次装填的6根毛细管色谱柱、两次装填的12根毛细管色谱柱以及一次装填1根与一次装填6根毛细管色谱柱的性能及稳定性。实验结果表明:同一批次装填的6根毛细管色谱柱的性能相近;不同批次装填的12根毛细管色谱柱的峰容量和覆盖率没有明显的区别,但保留时间和毛细管色谱柱柱压的稳定性较差;一次装填1根和一次装填6根毛细管色谱柱柱性能的稳定性与两次分别装填6根毛细管色谱柱的稳定性相近,即采用本装置可显著提高毛细管色谱柱的装填效率且每次装填毛细管色谱柱的数量不会对柱性能产生影响。     

Characterization of stationary phases based on monosubstituted benzene retention indices using correspondence factor analysis and linear solvation energy relationships in RPLC

In reversed-phase liquid chromatography (RPLC), the comparison of experimental results obtained from different columns is a complex problem. A correspondence factor analysis (CFA) and a linear solvation energy relationship (LSER) were applied on retention data to characterize second-order intermolecular interactions responsible for retention on a set of RPLC columns. Seven octadecyl-C₁₈ columns with different packing materials are obtained from different manufacturers and one octyl-C₈ column. The retention data were determined under isocratic conditions using a methanol–water (65:35, v/v) mobile phase. The chromatographic retention indices based on alkan-2-ones and alkyl aryl ketones retention index scales are calculated using a multiparametric least-squares regressions iterative method. The CFA and LSER results permitted to highlight that the retention indices were appropriate for studying the second-order retention mechanisms on the eight chromatographic systems investigated and exhibited the best reproducibility. Although many earlier studies have reported the use of chemometric methods to characterize chemical factors affecting retention in RPLC using retention factors as retention parameters, this is the first study based on retention indices.     

A drying step in the protocol to pack capillary columns by centripetal forces for capillary electrochromatography.

Capillary columns have been packed for capillary electrochromatography (CEC) using centripetal forces. The packed columns were maintained under wet conditions or they were dried with nitrogen gas prior to forming the retaining frits. Upon fabrication of the retaining frits, the dried columns were resolvated with the mobile phase. The performance of the columns was evaluated to determine the effect of the drying step during the packing procedure. The columns submitted to the drying step showed improved separation efficiencies and stronger retention characteristics than those kept under wet conditions. The drying step allows the silica-based packing material to be better accommodated inside the capillary column. Upon solvation, the packing material "swells," resulting in a greater packing density, which allows for a stronger retention and improved separation efficiencies. The drying step led to a 13% increase in retention on columns packed with isopropanol. An increase of 15-20% in theoretical plates for the most retained compounds was also observed in such columns.     

Comparison of different packing methods for capillary electrochromatography columns

A study was carried out in which 50 microm I.D. fused-silica capillaries were packed with 3 microm octadecylsilane bonded silica, from the same batch, by four methods; liquid slurry and carbon dioxide supercritical carrier, each with and without the use of an ultrasonic probe. A neutral test mixture was analysed by capillary column in reversed-phase mode, and the reproducibility of the electroosmotic flow and of migration time, column efficiency and retention factors, was determined. Initially results suggested that there was no significant difference between properties of columns packed by different methods, and a more thorough statistical evaluation confirmed this; differences observed in the column performance were attributed to random variations between replicate columns, and not between packing methods. However, the variation was least when applying the ultrasonication during liquid slurry.     

Behavior of n-alkanes on poly(oxyethylene) capillary columns. Evaluation of interfacial effects

The solvation behavior of n-alkanes on poly(oxyethylene) was studied employing capillary gas chromatography. Interfacial effects were discriminated and evaluated through the analysis of retention data from six commercial fused-silica capillary columns, having film thicknesses of 0.15-5 microm. Expressions for the mixed retention mechanism in capillary columns were deduced from assumptions of a general character. Partition coefficients were determined for the n-alkanes up to 28 carbon atoms, at temperatures ranging from 40 to 240 degrees C. In agreement with other authors, it was observed that interfacial phenomena contribute poorly to the chromatographic retention, being negligible over 140 degrees C for homologues with less than 16 carbons.     

Evaluation of packed capillary liquid chromatography columns and comparison with conventional-size columns

Apart from extracolumn effects peak dispersion in liquid chromatographic columns is caused by the column inlet, the packed bed, and the column outlet. A strategy applicable for independent evaluation of the individual sources of column band broadening was developed on the basis of the linear extrapolation method (LEM). This method was applied to compare the performance of packed capillary LC columns from various commercial suppliers with conventional-size columns. The columns differed widely in their performance with respect to peak shapes and widths for standard substances. The capillary columns were found well packed, but in some cases overall performance would benefit from improving the design of the area between the packed bed and the connecting capillaries, containing frits as well as dead volumes.     

Practical aspects of using methacrylate-ester-based monolithic columns in capillary electrochromatography

Methacrylate-ester-based monoliths containing quaternary ammonium groups were prepared in situ in capillary columns and in simultaneous experiments in vials, employing thermal initiation. The chromatographic properties of the monoliths were determined with capillary electrochromatography (CEC), and their morphology was studied with mercury-intrusion porosimetry on the bulk materials. Materials with different, well repeatable pore-size distributions could be prepared. A satisfactory column-to-column and run-to-run repeatability was obtained for the electro-osmotic mobility, the retention characteristics (k-values) and the efficiency on the columns prepared and tested in the CEC mode. A relatively high electro-osmotic flow was observed in the direction of the positive electrode. The electro-osmotic mobility was found to be influenced only marginally by mobile-phase parameters such as the pH, ionic strength, and acetonitrile content. The retention behavior of the monolithic columns was similar to that of columns packed with C18-modified silica particles. Columns could be prepared with optimum plate heights ranging from 6 microm for unretained compounds to 20 microm for well retained (k=2.5) polyaromatic hydrocarbons. However, for specific analytes a - still unexplained - lower chromatographic column efficiency was observed.     

Reproducible preparative liquid chromatography columns

The level of reproducibility for sets of preparative liquid chromatography (prep-LC) columns was studied using a self-packing axial compression system. Standard deviations of less than 5% of the mean of the column efficiency and less than 2% of the mean of the retention time are reported for three sets of packed, prep-LC columns.     

The potential of serially coupled alkyl-bonded silica monolithic columns for high resolution separations of pharmaceutical compounds in biological fluids

Summary In this paper we investigate the potential of alkyl-bonded silica monolithic columns for the isolation and identification of drug-related components in biological fluids. Up to 6 columns have been connected in series to produce a chromatographic system with up to 40,000 plates. This high-resolution chromatography system has been coupled to both MS and NMR to enable efficient detection and characterisation of drug-related components in biological fluids. The use of six coupled columns has been shown to give enhanced resolution over a high quality silica particulate column packed with 3 μm material which exhibits the same back pressure. The effect of volume and mass load on the performance of monolithic columns for semi-preparative chromatography of biological fluids has also been investigated. In these studies it was possible to inject up to 100 mL of neat urine with no loss of chromatographic performance. Furthermore, upon re-testing, the columns showed similar chromatographic performance. Again several columns were serially connected, producing enhanced resolution in the semi-preparative mode.     

A miniature gradient elution system for liquid chromatography with packed capillary columns

A miniaturized continuous gradient elution system was designed for work with packed capillary columns. The retention reproducibility achieved is adequate for many practical applications.     

Practical aspects of fast reversed-phase high-performance liquid chromatography using 3 microm particle packed columns and monolithic columns in pharmaceutical development and production working under current good manufacturing practice

The potential and limitations of fast reversed-phase high-performance liquid chromatographic separations for assay and purity of drug substances and drug products were investigated in the pharmaceutical industry working under current good manufacturing practice using particle packed columns and monolithic columns. On particle packed columns, the pressure limitation of commercially available HPLC systems was found to be the limiting factor for fast separations. On 3 microm particle packed columns, HPLC run times (run to run) for assay and purity of pharmaceutical products of 20 min could be achieved. As an interesting alternative, monolithic columns were investigated. Monolithic columns can be operated at much higher flow rates, thus allowing for much shorter run times compared to particle packed columns. Compared to particle packed columns, the analysis time could be reduced by a factor up to 6. However, some compounds investigated showed a dramatic loss of efficiency at higher flow rates. This phenomenon was observed for some larger molecules supporting the theory that mass transfer is critical for applications on monolithic columns. At flow rates above 3 ml/min some HPLC instruments showed a dramatic increase in noise, making quantifications at low levels impossible. For very fast separations on monolithic columns, the maximum data acquisition rate of the detector is the limiting factor.     

一种提高色谱指纹谱保留时间重现性的新方法

通过色谱热力学分析发现，在相同的分析条件下，即使采用不同的液相色谱系统或不同的色谱柱，组分的保留时间存在简单的线性关系，应用该线性关系可提高不同反相C18柱间保留时间重现性，经过实际样品在不同操作条件下的验证，表明该方法是正确而可行的。     

Peptide separation in normal-phase liquid chromatography. Study of selectivity and mobile phase effects on various columns.

An experimental procedure for peptide separation by normal-phase liquid chromatography (NPLC) was proposed in previous papers. In the present study, the chromatographic behavior of amino, cyano, amide, diol and silica columns, which have been used in non-aqueous NPLC, is investigated anew. The amino column was not appropriate for peptide separation because of poor recovery. The cyano column could not be used due to lack of retention. The amide, diol and silica columns were useful for peptide separation. The chromatograms on amide, diol and silica columns were a little different when the mobile phase composition was changed. The recovery of peptides was good: diol > amide > silica. Repeatability and reproducibility using amide, diol and silica columns was satisfactory.     

不锈钢宽口径填充毛细管液相色谱柱

 设计了一种零死体积的二通式柱尾结构和一种使匀浆填料均匀进入色谱柱管内的储料池 ,研究了制备内径在 0 5mm～ 1 0mm的不锈钢宽口径填充毛细管液相色谱柱的方法。详述了以不同牌号、规格的反相ODS类固定相制备的不同柱长的色谱柱的性能。通过折合板高 /折合流速关系和不对称因子对柱性能进行了评价 ,结果表明 ,该方法制备的色谱柱柱效达到理论值的 75 %以上、RSD为 6% ,稳定性也很好。将其应用于抗癫痫药物和氯苯类化合物的分析 ,结果令人满意。