1,3-Diarylimidazolidin-2-ylidene (NHC) complexes of Pd(II): Electronic effects on cross-coupling reactions and thermal decompositions

The synthesis of 1,3-diarylimidazolidin-2-ylidene (NHC) precursor, 1,3-bis(2,4,6-trimethylphenyl)imidazolinium chloride, (3b) has been extended to the electronically and sterically modified NHC precursors 3a (X = H), 3c (X = Br) and 3e (X = Cl) in order to investigate the electronic effect of a p-substituent (X) on cross-coupling catalysts. Complexes of the type PdCl₂(NHC)₂ (5), PdCl₂(NHC)(PPh₃) (6) and [RhCl(NHC)(cod)] (7) were prepared from 3 or 4d (1,3-bis(2,4-dimethylphenyl)-2-trichloromethylimidazolidin). Initial decomposition temperatures of the complexes 5 and 6 were determined by TGA. In situ formed complexes from Pd(OAc)₂ and 3 as well as the preformed complexes 5 and 6 have been tested as catalysts in coupling of phenylboronic acid with 4-haloacetophenones. The electron donating ability of NHCs derived from 3 was assessed by measuring C-O frequencies in the respective [RhCl(NHC)(CO)₂] complex 8 which was prepared by replacement of cod ligand of 7 with CO. An interesting correlation between the electron-donating nature of the aryl substituent and catalytic activity and also initial decomposition temperature of the complexes 5 and 6 was observed.     

Synthesis and structural characterisation of the palladium N-heterocyclic carbene cluster complexes [Pd3(μ-CO)3(NHC)3] and [Pd3(μ-SO2)3(NHC)3]

The reduction of trans-[Pd(NHC)₂Cl₂] (NHC = IMes, 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene; IⁱPr₂ = 1,3-bis-isopropylimidazol-2-ylidene) with potassium graphite under an atmosphere of CO affords the palladium NHC carbonyl clusters [Pd₃(μ-CO)₃(NHC)₃] (NHC = IMes, 1; IⁱPr₂, 3). Treatment of 1 with SO₂ at room temperature yields the bridging SO₂ complex [Pd₃(μ-SO₂)₃(IMes)₃] (4) in quantitative yield. Complexes 1, 3 and 4 have been structurally characterised by X-ray crystallography.     

Group 9 complexes of an N-heterocycle carbene bearing a pentafluorobenzyl substituent: attempted dehydrofluorinative coupling of cyclopentadienyl and N-heterocycle carbene ligands

Treatment of N-methylimidazole with pentafluorobenzyl bromide produces 1-pentafluorobenzyl-3-methylimidazolium bromide (1), which reacts with silver(I) oxide to give the N-heterocycle carbene (NHC) complex 1-pentafluorobenzyl-3-methylimidazolin-2-ylidene silver(I) bromide (2). Complex 2 acts as a carbene transfer reagent giving the complexes [(η⁵-C₅Me₅)MCl₂(NHC)] (3a, M = Rh; 3b M = Ir) on reaction with [(η⁵-C₅Me₅)MCl(μ-Cl)]₂. An attempt to use intramolecular dehydrofluorinative coupling methodology to link the carbene and the pentamethylcyclopentadienyl ligands of [(η⁵-C₅Me₅)RhCl(CN^tBu)(NHC)]BF₄ was unsuccessful.     

Coordination compounds of N,N′-olefin functionalized imidazolin-2-ylidenes

N-Heterocyclic carbene ligands (NHC) were metalated with Pd(OAc)₂ or [Ni(CH₃CN)₆](BF₄)₂ by in situ deprotonation of imidazolium salts to give the N-olefin functionalized biscarbene complexes [MX₂(NHC)₂] 3-7 (3: M = Pd, X = Br, NHC = 1,3-di(3-butenyl)imidazolin-2-ylidene; 4: M = Pd, X = Br, NHC = 1,3-di(4-pentenyl)imidazolin-2-ylidene; 5: M = Pd, X = I, NHC = 1,3-diallylimidazolin-2-ylidene; 6: M = Ni, X = I, NHC = 1,3-diallylimidazolin-2-ylidene; 7: M = Ni, X = I, NHC = 1-methyl-3-allylimidazolin-2-ylidene). Molecular structure determinations for 4-7 revealed that square-planar complexes with cis (5) or trans (4, 6, 7) coordination geometry at the metal center had been obtained. Reaction of nickelocene with imidazolium bromides afforded the η⁵-cyclopentadienyl (η⁵-Cp) monocarbene nickel complexes [NiBr(η⁵-Cp)(NHC)] 8 and 9 (8: NHC = 1-methyl-3-allylimidazolin-2-ylidene; 9: NHC = 1,3-diallylimidazolin-2-ylidene). The bromine abstraction in complexes 8 and 9 with silver tetrafluoroborate gave complexes [NiBr(η⁵-Cp)(η³-NHC)] 10 and 11. The X-ray structure analysis of 10 and 11 showed a trigonal-pyramidal coordination geometry at the nickel(II) center and coordination of one N-allyl substituent.     

N-heterocyclic carbene coordinated gallanes and chlorogallanes

The preparation of the N-heterocyclic carbene coordinated gallium complexes [GaH₃(IXy)] (1), [GaH₃(IDipp)] (2), [GaClH₂(IMes)] (3) and [GaCl₂H(IMes)] (4), where IXy = 1,3-bis(2,6-dimethylphenyl)imidazol-2-ylidene, IDipp = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene and IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene, are reported. All four complexes have been characterised by ¹H, ¹³C NMR and IR spectroscopy and, for complexes 2, 3 and 4, single crystal X-ray structure determination. These compounds represent some of the most thermally stable molecular gallium hydrides known, with 4 being the most thermally stable gallium hydride reported (dec. 274 °C). These remarkable thermal stabilities translate to significant aerobic stability such that all four compounds may be handled in dry air without significant decomposition. Compounds 2, 3 and 4 exist as distorted tetrahedra in the solid state with gallium to carbene C-donor bonds that shorten with increasing Lewis acidity of the gallium centre. Compound 2 co-crystallizes with 1 equiv. of 2,6-diisopropylphenylaniline and exhibits several weak intermolecular bonding interactions in the solid-state.     

Synthesis and structural characterisation of rhodium hydride complexes bearing N-heterocyclic carbene ligands

Addition of excesses of N-heterocyclic carbenes (NHCs) IEt₂Me₂, IⁱPr₂Me₂ or ICy (IEt₂Me₂ = 1,3-diethyl-4,5-dimethylimidazol-2-ylidene; IⁱPr₂Me₂ = 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene; ICy = 1,3-dicyclohexylimidazol-2-ylidene) to [HRh(PPh₃)₄] (1) affords an isomeric mixture of [HRh(NHC)(PPh₃)₂] (NHC = IEt₂Me₂ (cis-/trans-2), IⁱPr₂Me₂ (cis-/trans-3), ICy (cis-/trans-4) and [HRh(NHC)₂(PPh₃)] (IEt₂Me₂(cis-/trans-5), IⁱPr₂Me₂ (cis-/trans-6), ICy (cis-/trans-7)). Thermolysis of 1 with the aryl substituted NHC, 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene (IMesH₂), affords the bridging hydrido phosphido dimer, [{(PPh₃)₂Rh}₂(μ-H)(μ-PPh₂)] (8), which is also the reaction product formed in the absence of carbene. When the rhodium precursor was changed from 1 to [HRh(CO)(PPh₃)₃] (9) and treated with either IMes (=1,3-dimesitylimidazol-2-ylidene) or ICy, the bis-NHC complexes trans-[HRh(CO)(IMes)₂] (10) and trans-[HRh(CO)(ICy)₂] (11) were formed. In contrast, the reaction of 9 with IⁱPr₂Me₂ gave [HRh(CO)(IⁱPr₂Me₂)₂] (cis-/trans-12) and the unusual unsymmetrical dimer, [(PPh₃)₂Rh(μ-CO)₂Rh(IⁱPr₂Me₂)₂] (13). The complexes trans-3, 8, 10 and 13 have been structurally characterised.     

Quinoline-functionalized N-heterocyclic carbene complexes of iridium: Synthesis, structures and catalytic activities in transfer hydrogenation

Iridium complexes containing quinoline-functionalized N-heterocyclic carbene (NHC) ligands have been synthesized by the transmetalation route from silver carbene precursors. The silver complexes undergo a facile reaction with [Ir(COD)Cl]₂ (COD = 1,5-cyclooctadiene) to yield a series of carbene complexes [(NHC)Ir(COD)Cl] (NHC = 3-methyl-1-(8-quinolylmethyl)imidazole-2-ylidene (2a); 3-n-butyl-1-(8-quinolylmethyl)imidazole-2-ylidene (2b); 3-benzyl-1-(8-quinolylmethyl)imidazole-2-ylidene (2c); 1,3-di(8-quinolylmethyl)imidazole-2-ylidene (2d). The coordinated COD was replaced by carbon monoxide to yield the corresponding carbonyl species [(NHC)Ir(CO)₂Cl] (3). Complexes 2 and 3 have been characterized by IR, ESI-MS, ¹H and ¹³C NMR and elemental analyses. The molecular structures of complexes 2b and 2c have been confirmed by single-crystal X-ray diffraction. Two analogous Ir(I) complexes 5 and 6 with naphthalene-containing NHC have also been synthesized and characterized. These Ir(I) complexes in the current work have been proved to be active catalysts in the transfer hydrogenation of ketones to alcohols using 2-propanol as the hydrogen source.     

1,4-Cycloaddition of pyrazole with mesityl oxide; solid-state structure of bicyclic [C6H5Me3N2(OH)]Cl

The synthesis of bicyclic 6-hydroxy-6,8,8-dimethyl-5-aza-1-azonia-bicyclo[3.3.0]octa-1,3-diene chloride, [C₆H₅Me₃N₂(OH)]Cl, (5) by the HCl-catalyzed 1,4-cycloaddition of pyrazole (1) with mesityl oxide (4) is described. A proposed mechanism for the formation of 5 will be given.     

A new dirhodium tetraacetate carbenoid: Synthesis, crystal structure and catalytic application

A new dirhodium tetraacetate II involving 1,3-bis(2,6-diisopropylphenyl)-imidazol-2-ylidene I was synthesized and characterized by general spectroscopic tools in the solution state as well as single X-ray crystallographic analysis in the solid state. The catalytic activity of dirhodium tetraacetate carbenoid II was tested for the allylic oxidation, and the improved reactivity to the allylic oxidation was observed compared to that of Rh₂(OAc)₄. The different electrochemical properties of dirhodium tetraacetate carbenoid II and Rh₂(OAc)₄ were compared via cyclic voltammetry.     

Facile one-step synthesis of bis(NHC) ruthenium benzylidene catalyst for ring-closing metathesis

Bis(NHC) ruthenium benzylidene complex (H₂IMe)₂(Cl)₂RuCHPh (9) [H₂IMe = 1,3-bis(2,6- dimethylphenyl)-4,5-dihydroimidazol-2-ylidene] was synthesized facilely by one-step reaction of (PPh₃)₂(Cl)₂RuCHPh (7) with N-heterocyclic carbene (NHC) H₂IMe (6). Complex 9 proved to exhibit remarkable catalytic activity for ring-closing metathesis (RCM) reaction at increased temperature.     

Influence of multidentate N-donor ligands on highly electrophilic zinc initiator for the ring-opening polymerization of epoxides

A set of multidentate ligands have been synthesized and used to stabilize the putative highly electrophilic zinc species initiating ring-opening polymerization (ROP) of cyclohexene oxide (CHO) and propylene oxide (PO). Reaction of the bidentate C₂-chiral bis(oxazoline) ligand (^R2,R3BOX: R₂ = (4S)-tBu, R₃ = H (a); R₂ = (4S)-Ph, R₃ = H (b); R₂ = (4R)-Ph, R₃ = (5S)-Ph (c)) with Zn(R₁)₂ (R₁ = Et (1), Me (2)) led to the heteroleptic three-coordinate complexes (^R2,R3BOX)ZnR₁, 1a-c and 2a, which were isolated in 92-96% yield. Next, two pyridinyl-functionalized N-heterocyclic carbene (NHC) ligands have been designed and synthesized: the 1,3-bis(2-pyridylmethyl)imidazolinium salt (d) and the protected NHC adduct 2-(2,3,4,5,6-pentafluorophenyl)-1,3-bis(2-pyridylmethyl)imidazolidine (e). The reaction of ligands d and e with ZnEt₂ led directly to the formation of (NHC)ZnEt(Cl) 3d complex with ethane elimination and the adduct (NHC-C₆F₅(H))ZnEt₂4e, respectively, in high yield. In situ combinations of selected complexes 1a-c, 3d and 4e with B(C₆F₅)₃ (1 or 2 equivalents) give active systems for ROP, with high productivity (3.3-5.9 10⁶ g_polym. mol_Zn⁻¹ h⁻¹) and high molecular weight (M_n up to 132 10³ g mol⁻¹) for CHO polymerization. Although the in situ B(C₆F₅)₃-activated zinc species were not isolated, the sterically demanding BOX ligands (1c > 1b > 1a) and functionalized NHC ligands seem to enhance the stability of highly electrophilic zinc complexes over ligand redistribution, allowing a better control of the cationic ROP as reflected particularly for 3d and 4e complexes by their respective efficiency (42-88%).     

The synthesis of complexes using precursor complexes with ferrocenyl carboxylate units as building blocks

Using ferrocenyl carboxylates as functional ligands, we synthesized a mononuclear complex [Zn(η²-OOCCHCHFc)₂(CH₃OH)₂] (1) and a binuclear complex [Cd(bafca)₂(H₂O)₂]₂ (2) (bafca⁻ = α-benzamido-β-ferrocenylacrylic carboxylate) as precursor complexes. Investigation on the substitution reaction of precursor complexes as building blocks in solution-state, four complexes [Zn(OOCCHCHFc)₂(bbbm)]_n (1a), {[Zn(OOCCHCHFc)(ntb)](CH₃OH)} (1b), [Cd(bafca)₂(2,2′-bpy)]₂ · 9H₂O (2a) and {[Cd(bafca)₂(bbbm)(CH₃OH)₂] · 6CH₃OH}_n (2b) were obtained (bbbm = 1,1-(1,4-Butanediyl)bis-1H-benzimidazole, ntb = N,N-bis(1H-benzimidazol-2-ylmethyl)-1H-Benzimidazole-2-methanamine and 2,2′-bpy = 2,2′-bipyridine). As anticipated, the structural integrity of precursor complexes can be maintained in these four complexes. It indicates that we can synthesize the desired complexes with the destination structures by using precursor complexes as building blocks and choosing appropriate auxiliary ligands. In addition, the electrochemical properties of all complexes were investigated, and it can be seen from the results that half-wave potentials of these complexes are slightly higher than that of the corresponding ligand.     

Synthesis, spectral and structural studies of 1-ethoxycarbonyl-piperazine-4-carbodithioate and its Co(III), Zn(II) and Cd(II) complexes

The new complexes [Co(ecpzdtc)₃] (2) [Zn(ecpzdtc)₂(py)] (3) and [Cd(ecpzdtc)₂(py)]·H₂O (4) have been synthesized from sodium 1-ethoxycarbonyl-piperazine-4-carbodithioate [(Na⁺(ecpzdtc)⁻]. The ligand and the complexes have been characterized by elemental analyses, IR, magnetic susceptibility and single crystal X-ray data. The [Zn(ecpzdtc)₂(py)] and [Cd(ecpzdtc)₂(py)]·H₂O complexes contain pyridine as the co-ligand. [Co(ecpzdtc)₃] (2) crystallizes in the monoclinic system, whereas [Zn(ecpzdtc)₂(py)] (3) and [Cd(ecpzdtc)₂(py)]·H₂O (4) crystallize in the triclinic system. The sulfur donor sites of the bidentate ligand chelate the metal center, forming a four-membered CS₂M ring. The cobalt complex has a distorted octahedral geometry, the zinc complex is almost between trigonal bipyramidal and square pyramidal, whereas the cadmium complex is square pyramidal. The crystal structures of all the complexes are stabilized by various types of inter and intramolecular hydrogen bonding.     

Synthesis of 4-(2-hydroxy-1-methyl-5-oxo-1H-imidazol-4(5H)-ylidene)-5-oxo-1-aryl-4,5-dihydro-1H-pyrrole-3-carboxylates, a new triazafulvalene system

(2E,3Z)-2-(1-Methyl-2,5-dioxoimidazolidin-4-ylidene)-3-[(arylamino- or heteroarylamino)methylene]succinate 5 obtained by [2+2] cycloaddition of (5Z)-5-[(dimethylamino)methylene]-3-methylimidazolidine-2,4-dione (1) and dimethyl acetylenedicarboxylate (2) followed by substitution of the dimethylamino group with aromatic or heteroaromatic amines, afforded by heating in ethanol in the presence of potassium hydroxide, potassium salts 6. Acidification of 6 with hydrochloric acid afforded mixtures of (E)- and (Z)-isomers of methyl 4-(2-hydroxy-1-methyl-5-oxo-1H-imidazol-4(5H)-ylidene)-5-oxo-1-phenyl-4,5-dihydro-1H-pyrrole-3-carboxylates. On the other hand, alkylation of compounds 6 with methyl iodide or benzyl bromide produced the corresponding methyl (E)-4-(2-methoxy- or 2-benzyloxy-1-methyl-5-oxo-1H-imidazol-4(5H)-ylidene)-5-oxo-1-phenyl-4,5-dihydro-1H-pyrrole-3-carboxylates 9, derivatives of a new triazafulvalene system.     

Gold(I) N-heterocyclic carbene based initiators for bulk ring-opening polymerization of l-lactide

Synthesis, structures, and catalysis studies of gold(I) complexes of N-heterocyclic carbenes namely, a di-O-functionalized [1-(2-hydroxy-cyclohexyl)-3-(acetophenone)imidazol-2-ylidene], a mono-O-functionalized [1-(2-hydroxy-cyclohexyl)-3-(benzyl)imidazol-2-ylidene] and a non-functionalized [1,3-di-i-propyl-benzimidazol-2-ylidene], are reported. Specifically, the gold complexes, [1-(2-hydroxy-cyclohexyl)-3-(acetophenone)imidazol-2-ylidene]AuCl (1c), [1-(2-hydroxy-cyclohexyl)-3-(benzyl)imidazol-2-ylidene]AuCl (2c), and [1,3-di-i-propyl-benzimidazol-2-ylidene]AuCl (3b), were prepared from the respective silver complexes 1b, 2b, and 3a by treatment with (SMe₂)AuCl in good yields following the commonly used silver carbene transfer route. The silver complexes 1b, 2b, and 3a were synthesized from the respective imidazolium halide salts by the reactions with Ag₂O. The N-heterocyclic carbene precursors, 1-(2-hydroxy-cyclohexyl)-3-(acetophenone)imidazolium chloride (1a) and 1-(2-hydroxy-cyclohexyl)-3-(benzyl)imidazolium chloride (2a), were synthesized by the direct reactions of cyclohexene oxide and imidazole with chloroacetophenone and benzyl chloride respectively. The gold (1c, 2c, and 3b) and the silver (3a) complexes along with a new O-functionalized imidazolium chloride salt (1a) have been structurally characterized by X-ray diffraction. The structural studies revealed that geometries around the metal centers were almost linear in these gold and silver complexes. The gold (1c, 2c, and 3b) complexes efficiently catalyze ring-opening polymerization (ROP) of l-lactide under solvent-free melt conditions producing polylactide polymer of moderate to low molecular weights with narrow molecular weight distributions.     

Ag(I) and Pd(II) complexes of a 1,3-dibenzhydryl substituted benzannulated N-heterocyclic carbene: Unexpected rearrangement, structures and catalytic studies

Reaction of the sterically bulky 1,3-dibenzhydrylbenzimidazolium bromide (Bh₂-bimyH⁺Br⁻) (A) with Pd(OAc)₂ in DMSO yielded a mono(carbene) Pd(II) complex 1 with a N-bound benzimidazole derivative, which resulted from an unusual NHC rearrangement reaction. Reaction of A with Ag₂O, on the other hand, cleanly gave the Ag(I) carbene complex [AgBr(Bh₂-bimy)] (2), which has been used as a carbene-transfer agent to prepare the acetonitrile complex trans-[PdBr₂(CH₃CN)(Bh₂-bimy)] (3). Dissociation of acetonitrile from complex 3 and subsequent dimerization afforded the dinuclear Pd(II) complex [PdBr₂(Bh₂-bimy)]₂ (4) in quantitative yield. All complexes were fully characterized by multinuclear NMR spectroscopies, ESI mass spectrometry and X-ray diffraction analysis. Furthermore, the catalytic activity of complex 4 in aqueous Suzuki-Miyaura cross-coupling reactions was studied and compared with that of its previously reported less bulky analogue [PdBr₂(ⁱPr₂-bimy)]₂.     

Self-assembly of a tridentate Schiff-base ligand with Zn(II) in the presence of lanthanides: Novel crystal structures and spectroscopic properties

Condensation of picolinaldehyde with methyl 4-amino-3-hydroxy-benzoate resulted in the acquisition of a tridentate Schiff-base ligand (HL) which contains a structural moiety typical of octahedrally cored grid-type analogs. Reactions of HL with Zn(NO₃)₂ in the presence of Ln(NO₃)₃ [Ln = Sm(III), Tb(III) and Yb(III)] result in two types of complexes, viz. [Zn(HL)(L)]₂[Ln(NO₃)₅] [Sm(III), 1a and Tb(III), 1b] and [Zn(HL)L]₂[Yb(NO₃)₅]·C₃H₆O (1c). Despite applying two different synthetic protocols, the transition metal ion displayed a greater propensity towards the meridional tridentate pocket, which is reflected by XRD analysis, the ESI-MS technique and further supported by elemental analysis and IR characterization of each compound. In addition, we have compared the luminescence properties of 1a, 1b and 1c with the previously synthesized [Zn(HL)(L)]₂[Zn(NO₃)₄] (1d) to investigate whether a different metal in the outer coordination sphere could somehow tune the compounds’ spectral behavior.     

New bipyridyl/phenanthroline ruthenium(II) and ruthenium(III) complexes possessing acetate appended thioether. Evidence for oxidative linkage isomerization

The acetate bearing dithioether, sodium di(2-carboxymethylsufanyl)maleonitrile, L¹ upon reaction with [Ru^II(bpy)₂Cl₂]·2H₂O, [Ru^II(phen)₂Cl₂]·2H₂O, [Ru^III(bpy)₂Cl₂]⁺ or [Ru^III(phen)₂Cl₂]⁺ in methanol formed complexes of the type [(bpy)₂Ru{S₂(CH₂COO)₂C₂(CN)₂}], (1), [(phen)₂Ru{S₂(CH₂COO)₂C₂(CN)₂}], (2), [(bpy)₂Ru{(OOCCH₂)₂S₂C₂(CN)₂}]⁺, (5) and [(phen)₂Ru{(OOCCH₂)₂S₂C₂(CN)₂}]⁺, (6) respectively. Four other Ru(III) complexes with di(benzylsulfanyl)maleonitrile, L², [(bpy)₂Ru{S₂(PhCH₂)C₂(CN)₂}]³⁺, (7) and [(phen)₂Ru{S₂(PhCH₂)₂C₂(CN)₂}]³⁺, (8), and with acetate, [(bpy)₂Ru(OOCCH₃)₂]⁺, (9) and [(phen)₂Ru(OOCCH₃)₂]⁺, (10) were also synthesized. In the cyclic voltammetry, complexes (1) and (2) exhibited quasireversible oxidation waves at 1.01 and 1.02 V vs. Ag/AgCl over GC electrode in DMF, while the corresponding Ru(III) L¹ complexes (5) and (6) exhibit reversible oxidation at E_1/2 0.59 and 0.58 V, respectively, under identical conditions. This is unlike the voltammetric behavior of the Ru(II) and Ru(III) L² complexes, wherein the complex pairs (3), (7) and (4), (8) exhibited identical voltammograms with single reversible one electron waves at E_1/2 0.98 and 0.92 V, respectively under identical conditions. The voltammograms of Ru(II)-L² complexes (3) and (4) also became irreversible in presence of nearly four molar equivalent of sodium acetate. Hence, the irreversible redox behavior of complexes (1) and (2) has been interpreted in terms of rapid linkage isomerization, i.e. shift in κ²-S,S′ to κ²-O,O′ coordination, following the Ru(II)/Ru(III) electrode process. The electronic spectra of Ru(III)-L¹ complexes (5) and (6) resemble closely with that of (9) and (10) instead of Ru(III)-L² complexes (7) and (8), further supports proposed linkage isomerization. The cationic complexes were obtained as [PF₆]⁻ salts and all compounds were characterized using analytical and spectral (IR, ¹H NMR, UV-vis and mass) data.     

Dppm-substituted ruthenium clusters with capping sulfido and selenido ligands derived from thiourea, tetramethylthiourea and elemental selenium

Treatment of [Ru₃(CO)₁₀(μ-dppm)] (4) [dppm = bis(diphenylphosphido)methane] with tetramethylthiourea at 66 °C gave the previously reported dihydrido triruthenium cluster [Ru₃(μ-H)₂(μ₃-S)(CO)₇(μ-dppm)] (5) and the new compounds [Ru₃(μ₃-S)₂(CO)₇(μ-dppm)] (6), [Ru₃(μ₃-S)(CO)₇(μ₃-CO)(μ-dppm)] (7) and [Ru₃(μ₃-S){η¹-C(NMe₂)₂}(CO)₆(μ₃-CO)(μ-dppm)] (8) in 6%, 10%, 32% and 9% yields, respectively. Treatment of 4 with thiourea at the same temperature gave 5 and 7 in 30% and 10% yields, respectively. Compound 7 reacts further with tetramethylthiourea at 66 °C to yield 6 (30%) and a new compound [Ru₃(μ₃-S)₂{η¹-C(NMe₂)₂}(CO)₆(μ-dppm)] (9) (8%). Thermolysis of 8 in refluxing THF yields 7 in 55% yield. The reaction of 4 with selenium at 66 °C yields the new compounds [Ru₃(μ₃-Se)(CO)₇(μ₃-CO)(μ-dppm)] (10) and [Ru₃(μ₃-Se)(μ₃-η³-PhPCH₂PPh(C₆H₄)}(CO)₆(μ-CO)] (11) and the known compounds [Ru₃(μ-H)₂(μ₃-Se)(CO)₇(μ-dppm)] (12) and [Ru₄(μ₃-Se)₄(CO)₁₀(μ-dppm)] (13) in 29%, 5%, 2% and 5% yields, respectively. Treatment of 10 with tetramethylthiourea at 66 °C gives the mixed sulfur-selenium compounds [Ru₃(μ₃-S)(μ₃-Se)(CO)₇(μ-dppm)] (14) and [Ru₃(μ₃-S)(μ₃-Se){η¹-C(NMe₂)₂}(CO)₆(μ-dppm)] (15) in 38% and 10% yields, respectively. The single-crystal XRD structures of 6, 7, 8, 10, 14 and 15 are reported.     

Synthesis and lanthanide coordination chemistry of 2-[(phosphinoyl)methyl]-4,5-dihydrooxazole and 2-[(phosphinoyl)methyl]benzoxazole ligands

Syntheses for [(diphenylphosphinoyl)methyl]-4,5-dihydrooxazole (2) and [(diarylphosphinoyl)methyl]benzoxazoles [aryl = phenyl (3), tolyl (4), 2-trifluoromethylphenyl (5) and 3,5-bis(trifluoromethyl)phenyl (6)] have been developed. Each ligand has been characterized by spectroscopic methods and single crystal X-ray diffraction analyses have been completed for 2, 3, 4 and 5. The coordination chemistry of the ligands with Nd(NO₃)₃ and Yb(NO₃)₃ has been examined and structure determinations for [Nd(2)₂(NO₃)₃(CH₃OH)], [Nd(2)₂(NO₃)₃], [Yb(3)₂(NO₃)₃(H₂O)]·0.5(CH₃OH), [Nd(3)₂(NO₃)₃]·3(CHCl₃), [Nd(4)₂(NO₃)₃(H₂O)], [Yb(4)₂(NO₃)₃(H₂O)] and [Yb(5)₂(NO₃)₃(H₂O)]·0.5(CH₃CN) are reported. Depending upon conditions, the ligands act as monodentate PO or bidentate, chelating PO,N donors.