The highly regiospecific synthesis and crystal structure determination of 1,1′-2,5′ substituted ring-locked ferrocenes

1,1′-Ferrocene biscarboxaldehyde (1) has been prepared and the aldehyde groups were subsequently protected with acetal groups to produce 1,1′-bisacetalferrocene (2). A ring-locked ferrocene was synthesised by further derivatisation of the cyclopentadiene rings at the 2,2′ positions with phosphine substituents to produce 2,2′-bis-(acetal)-1,1′-diphenylphosphinoferrocene (3), which was subsequently coordinated to either a nickel chloride (5) or nickel bromide (6) metal centre. The ring-locked ferrocene complexes produced 2,5′-bis-(acetal)-1,1′-diphenylphosphinoferrocene substitution patterns. The acetal protecting groups of 2,2′-bis-(acetal)-1,1′-diphenylphosphinoferrocene were removed to produce 1,1′-bis-carboxaldehyde-2,2′-diphenylphosphinoferrocene (4). The Cp rings of 1,1′-bisacetalferrocene were also further derivatised at the 2,2′ positions with a silane to produce the ring-locked 1,1′-siloxane-2,5′-bisacetalferrocenophane (7). The acetal protecting groups were removed from this to produce 1,1′-siloxane-2,5′-ferrocenophanecarboxaldehyde (8). For both the phosphine and siloxane electrophiles, the substitution on the Cp rings gives chiral products (obtained as racemic mixtures). Due to the highly regioselective nature of the reaction and diastereoselectivity in the products only C₂-symmetric compounds were observed without the presence of meso diastereoisomers. Subsequent ring-locking forced the Cp rings to rotate, leading to 1,1′-ring-locked ferrocenes with 2,5′-arrangement of the acetal groups (i.e. on opposite faces of the ferrocene unit).     

cis,cis,cis,cis-1,2,3,4,5-Pentakis(hydroxymethyl)cyclopentane

All-cis pentamethanolcyclopentane has been obtained in six steps by Diels–Alder condensation of maleic anhydride with (benzyloxymethyl)cyclopenta-2,4-diene, reduction of the anhydride to a diol that was protected as the acetonide. Then, ozonolysis of the double bond, followed by reduction led to a cis-diol. Then successive deprotections of the three other methanol groups gave the cis,cis,cis,cis-1,2,3,4,5-pentakis(hydroxymethyl)cyclopentane.     

Novel first-generation dendrimers on calix[4]resorcinol core equipped with multiple triazole units

Novel first-generation dendrimers on the calix[4]resorcinol core with four branches each containing multiple 1,2,3-triazole units have been synthesized in one-step by acid catalyzed condensation of resorcinols with a new aldehyde dendron, namely, 4-{3,5-bis[(1-benzyl-1H-1,2,3-triazol-4-yl)- methoxy]benzyloxy}benzaldehyde (obtained by alkyne–azide cycloaddition). The reaction proceeds stereoselectively to form rccc-diastereoisomers in high yields.     

A Sequential Homologation of Alkynes and Aldehydes for Chain Elongation with Optional 13C‐Labeling

Terminal alkynes (RCCH) are homologated by a sequence of ruthenium‐catalyzed anti‐Markovnikov hydration of alkyne to aldehyde (RCH₂CHO), followed by Bestmann–Ohira alkynylation of aldehyde to chain‐elongated alkyne (RCH₂CCH). Inverting the sequence by starting from aldehyde brings about the reciprocal homologation of aldehydes instead. The use of ¹³C‐labeled Bestmann–Ohira reagent (dimethyl ((1‐¹³C)‐1‐diazo‐2‐oxopropyl)phosphonate) for alkynylation provides straightforward access to singly or, through additional homologation, multiply ¹³C‐labeled alkynes. The labeled alkynes serve as synthetic platform for accessing a multitude of specifically ¹³C‐labeled products. Terminal alkynes with one or two ¹³C‐labels in the alkyne unit have been submitted to alkyne–azide click reactions; the copper‐catalyzed version (CuAAC) was found to display a regioselectivity of >50 000:1 for the 1,4‐ over the 1,5‐triazine isomer, as shown analytically by ¹³C NMR spectroscopy.     

Diamidophosphites with remote P1-stereocentres and their performance in Pd-catalyzed enantioselective reactions

Diamidophosphite ligands based on 1,1′-bis(hydroxymethyl)ferrocene or N¹,N²-bis((S)-1-hydroxy-3,3-dimethylbutan-2-yl)oxalamide and bearing 1,3,2-diazaphospholidine rings with stereogenic phosphorus atoms were obtained. The use of these ligands provides up to 96% ee in Pd-catalyzed asymmetric allylations of (E)-1,3-diphenylallyl acetate, up to 70% ee in Pd-catalyzed desymmetrizations of N,N′-ditosyl-meso-cyclopent-4-ene-1,3-diol bis-carbamate and up to 80% ee in Pd-catalyzed allylic alkylations of cinnamyl acetate with ethyl 2-oxocyclohexane-1-carboxylate. Results obtained with a diamidophosphite containing an oxalamide framework show the considerable potential of such ligands in enantioselective catalysis.     

Tethered Blatter Radical for Molecular Grafting: Synthesis of 6-Hydroxyhexyloxy,Hydroxymethyl, and Bis(hydroxymethyl) Derivatives and Their Functionalization

Synthetic access to 7-CF₃-1,4-dihydrobenzo[e][1,2,4]triazin-4-yl radicals containing 4-(6-hydroxyhexyloxy)phenyl, 4-hydroxymethylphenyl or 3,5-bis(hydroxymethyl)phenyl groups at the C(3) position and their conversion to tosylates and phosphates are described. The tosylates were used to obtain disulfides and an azide with good yields. The Blatter radical containing the azido group underwent a copper(I)-catalyzed azide–alkyne cycloaddition with phenylacetylene under mild conditions, giving the [1,2,3]triazole product in 84% yield. This indicates the suitability of the azido derivative for grafting Blatter radical onto other molecular objects via the CuAAC “click” reaction. The presented derivatives are promising for accessing surfaces and macromolecules spin-labeled with the Blatter radical.     

Synthesis, structures and reactions of some metallocene alcohols

E-1-Ferrocenyl-4,4-dimethylpent-2-ene-1-one has been synthesised from the Friedel-Crafts acylation of ferrocene with E-3-tert-butylacryloylchloride and converted to 1-ferrocenyl-3-chloro-4,4-dimethylpentan-1-one using ethereal hydrogen chloride. This new chloro ketone has been converted into three new ferrocene alcohols: 1-ferrocenyl-3,4-dimethyl-4-hydroxypentan-1-one, 1-ferrocenyl-3-chloro-4,4-dimethylpentan-1-ol, and 2,2,6,6-tetramethyl-3-ferrocenyl-5-chloroheptan-3-ol. A new dinuclear ferrocene derivative, E,E-2,2,9,9-tetramethyl-5,6-diferrocenyl-deca-3,7-diene, was isolated after treatment of 1-ferrocenyl-3-chloro-4,4-dimethylpentan-1-ol with acidic alumina; its structure was confirmed by X-ray crystallography, whilst electrochemistry revealed metal-metal interactions of similar magnitude to those seen for other 1,2-bis(ferrocenyl)ethane derivatives. Crystal structures have also been determined for 2,2,6,6-tetramethyl-3-ferrocenyl-5-chloroheptan-3-ol, rac-1-hydroxy[3]ferrocenophane, rac-1S,3S-1,3-diphenyl-1-hydroxy[3]ferrocenophane, and of rac-1,1^′-diphenyl-1,1^′-(1,1^′- ruthenocenediyl)dimethanol and show an intramolecular Cl?H-O hydrogen bond, a tetramer based on O?H-O hydrogen bonds, no hydrogen bonding, and a dimer with inter- and intramolecular O?H-O hydrogen bonds, respectively.     

Nitrogen-Based Linkers with a Mesitylene Core: Synthesis and Characterization

Mesitylene was used as a core in seven new tritopic nitrogen containing linkers. Three of the linkers, each containing three nitrile groups, were obtained through Suzuki, Sonogashira and Heck-type coupling reactions. Next, these were converted to tetrazol-5-yl moieties by the cycloaddition of sodium azide to the nitrile functionalities. The last linker, containing three 1,2,3-triazol-4-yl moieties, was synthesized by the Huisgen cycloaddition of phenyl azide to the corresponding alkyne. The latter was obtained via a Corey–Fuchs reaction sequence from the previously reported formyl derivative. As the proof of concept for their potential in MOF design, one of the nitriles was used to build an Ag-based network.     

Synthesis of 5-pyridyl-2-furaldehydes via palladium-catalyzed cross-coupling with triorganozincates

5-Pyridyl- and 5-aryl-2-furaldehydes are prepared from furaldehyde diethyl acetal in a four-step, one-pot procedure:(i) deprotonation; (2) Li to Zn transmetalation; (3) Pd-mediated cross-coupling; (4) aldehyde deprotection. Triorganozincate 7 was found to transfer all three groups in the Pd-catalyzed cross-coupling reaction with haloaromatics.     

Indenols, indenones and (arylcyclohexadienyl)Mn(CO)3 π-complexes from the thermally promoted reactions of alkynes with ortho-Mn(CO)4 aryl ketone, amide, ester and aldehyde derivatives

Thermally promoted reactions of a range of alkynes with the orthomanganated acetophenone (η²-2-acetylphenyl)Mn(CO)₄ generally give 1H-inden-1-ols in good yield; effects of substituents and solvent on these reactions are reported, along with the crystal structure of 1-methyl-2,3-diphenyl-1H-inden-1-ol. The corresponding orthomanganated benzophenone similarly gives the indenol with diphenylacetylene but by exception, orthomanganated 3-acetylthiophene with phenylacetylene reacts via triple alkyne insertion and cyclisation, shown by crystal structure determination of the π-complex product [(1,2,3,4,5-η)-2-(3-acetylthien-2-yl)-1,3,5-triphenylcyclohexadienyl]tricarbonylmanganese. Corresponding orthomanganated derivatives of N,N-dimethylbenzamide, methyl 3,4,5-trimethoxybenzoate and 4-dimethylaminobenzaldehyde all give indenones with diphenylacetylene, but with (excess) acetylene only the aldehyde gives an indenone, the amide and ester giving instead [(1,2,3,4,5-η)-6-arylcyclohexadienyl]Mn(CO)₃ complexes. ¹H NMR analysis of these complexes shows H at C6 to be on the same face of the cyclohexadienyl ring as Mn(CO)₃ (endo-6-H; exo 6-aryl) as expected from three successive syn additions of alkyne at metallated carbon followed by intramolecular syn addition of alkene in the final cyclisation stage.     

Allylic strain as a stereocontrol element in the hydrogenation of 3-hydroxymethyl-cyclohex-3-en-1,2,5-triol derivatives. Synthesis of the carbasugar pseudo-2-deoxy-α-d-glucopyranose

By adaptation of a literature method developed in the glucose series and standard protecting group manipulations a 2-deoxy-d-glucose derivative is converted to a series of 1R,2R,5R-3-hydroxymethyl-cyclohexen-1,2,5-triol derivatives whose reduction to the corresponding diastereomeric d-gluco and l-ido-2-deoxy carbasugars is studied. When the hydroxymethyl group is tied up in a cyclic isopropylidene acetal with the adjacent 6-hydroxy group the cis-fused products with the ido-configuration are formed preferentially whereas protection of the hydroxymethyl group as a methoxymethyl ether results in the formation of the d-gluco isomer on hydrogenation over Raney nickel. This result is rationalized in terms of the minimization of allylic strain in the course of the reduction, enables the preparation of the carbasugar pseudo-2-deoxy-α-d-glucopyranose, and suggests that the conformation of the side chain is an important control element in the chemistry of the pseudosugars as it is in the sugars themselves.     

Chiral ferrocenyl ligands with bidentate pyridine donors. Synthesis and application in Pd-catalyzed asymmetric allylic alkylation of 1,3-diphenylpropenyl-1-esters

A synthetic procedure relying on the Friedländer condensation of enantiopure α-amino ferrocenecarboxaldeyde has been devised for the regio-designed elaboration of a pyridine nucleus fused onto the ferrocene scaffold. Three novel bidentate ligands with different pyridine nitrogen donors featuring the [3,2-b]ferrocenopyridine fragment a as the sole chirogenic element have been prepared in enantiopure form through a multi step route involving the diastereoselective deprotonation of a chiral acetal of ferrocenecarboxaldehyde in the stereodetermining step. The ligands were assessed in the Pd-catalyzed allylic alkylation of 1,3-diphenyl-2-propenyl esters with good stereoselectivity.     

New syntheses of unsymmetrical thiepins and their selenium analogues

New routes toward fused thiepins and their selenium analogues are described, wherein initial cleavage of suitable diaryl disulfides or selenides bearing masked aldehyde functionalities with an N-protected and metalated indole-3-carbaldehyde acetal or a lithiated 2-bromobenzaldehyde acetal derivative gave a set of unsymmetrical diacetals. Subsequent deacetalization, followed by McMurry coupling, afforded the target unsymmetrical thiepins and selenepins.     

Regio- and stereoselective SN2′ reaction of an allylic picolinate in the synthesis of LY426965

Allylic substitution of secondary γ,γ-disubstituted allylic picolinates with ArMgBr-based copper reagents was applied to the synthesis of LY426965. Reduction of (R)-6-(PMB-oxy)-3-hexyn-2-ol of 93% ee (PMB?=?p-MeOC₆H₄CH₂) using Red-Al gave (R,Z)-4-iodo-5-(PMB-oxy)hex-3-en-2-ol, which was later converted to the Me-substituted allylic picolinate by Pd-catalyzed coupling with MeZnI followed by esterification with picolinic acid. Allylic substitution with PhMgBr/Cu(acac)₂ proceeded with high anti S_N2′ selectivity (99%). Ozonolysis, addition of c-Hex-MgBr to the resulting aldehyde, and reductive amination with the piperazine derivative afforded LY426965.     

Synthesis of 6-nitro-4-sulfanyl-1H-indole derivatives from 2,4,6-trinitrotoluene

The synthesis of 6-nitro-4-sulfanyl-1H-indoles from 2,4,6-trinitrotoluene (TNT) is described. The first step is the nucleophilic substitution of an ortho-nitro group with a thiol to give the corresponding sulfide. The latter were transformed into the corresponding enamines upon treatment with dimethylformamide dimethyl acetal (DMF DMA). The enamines were converted into the indoles applying the Batcho–Leimgruber synthetic protocol.     

Enantioselective synthesis of (R)-incrustoporin,an antibiotic isolated from Incrustoporia carneola

Highly enantiomerically enriched (R)-incrustoporin was enantioselectively synthesized in 43.6% overall yield starting from 4-iodotoluene. The key steps of the synthesis included the asymmetric hydrogenation of 1-(p-tolyl)-1-pentyn-3-one catalyzed by a non-racemic Ru(II) complex and the Pd-catalyzed cyclocarbonylation of so-obtained highly enantiomerically enriched 1-(p-tolyl)-1-pentyn-3-ol. This Pd-catalyzed reaction, whose stereochemical outcome was previously unknown, proceeded with retention of configuration and 2.5% or less racemization. The enantiomeric purities of (R)-1-(p-tolyl)-1-pentyn-3-ol and (R)-incrustoporin were evaluated by HPLC analysis on a Chiralcel OJ column as well as by performing the ¹H NMR spectra of these compounds in a D₂O solution which was saturated with α- or β-cyclodextrin, respectively.     

A novel tandem cyclization of condensed 2,3-dialkynylpyrazines into [1,2,3]triazolo[1′,5′;1,2]pyrido[3,4-b]pyrazines promoted by sodium azide

6,7-Dialkynyl-1,3-dimethylpteridine-2,4(1H,3H)-diones and 2,3-dialkynylquinoxalines have been shown to react with sodium azide in DMF at room temperature giving rise 9,11-dimethyl-[1,2,3]triazolo[1′,5′;1,2]pyrido[4,3-g]pteridine-8,10(9H,11H)-diones and [1,2,3]triazolo[1′,5′;1,2]pyrido[3,4-b]quinoxalines. A novel tandem cyclization involves 1,3-dipolar cycloaddition of an azide ion to the carbon-carbon triple bond followed by intramolecular nucleophilic addition of the intermediate 1,2,3-triazole N-anion to another CC bond.     

A general approach to cyathin diterpenes. Total synthesis of allocyathin B(3)

[reaction: see text] The synthesis of allocyathin B(3) from an advanced intermediate possessing the ring system and relative stereochemistry but lacking the isopropyl and hydroxymethyl groups is reported. The isopropyl group was introduced by radical cyclization of a methyl propargyl acetal of an alpha-bromo ketone, and the hydroxymethyl group was generated by Pd-catalyzed carbonylation of a vinyl triflate. The route provides functionalized intermediates that could allow access to more complex members of the cyathin family of diterpenes.     

Synthesis of 1,4,5-trisubstituted-1,2,3-triazoles by copper-catalyzed cycloaddition-coupling of azides and terminal alkynes

Primary, secondary, and aromatic azides undergo 1,3 dipolar cycloaddition-coupling with an excess of alkyne in the presence of Cu(CH₃CN)₄PF₆ as catalyst, N,N,N′-trimethylethylenediamine as ligand, molecular oxygen, and 4-methoxymorpholine N-oxide (NMO) as co-oxidant to afford 1,4,5-trisubstituted-1,2,3-triazoles.     

Highly regioselective synthesis of polysubstituted pyrroles through three-component reaction induced by low-valent titanium reagent

1,2,3,5-Tetrasubstituted and 1,2,3,4,5-pentasubstituted pyrroles may be synthesized through three-component reaction of 1,3-diketones, aldehydes, and amines induced by low-valent titanium reagent. High regioselectivity was achieved. Compared with the classical synthetic method, this new method has the advantages of short reaction time (15 min), high yields, convenient manipulation, and high regioselectivity.