Synthesis, characterization, and ethylene polymerization behavior of [(RR′-admpzp)2Ti(OPr)2] complexes (RR′-admpzp = 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-olate)

[(RR′-admpzp)₂Ti(OPrⁱ)₂] complexes (2a-c), synthesized from reaction of Ti(OPrⁱ)₃Cl (0.5 equiv) with 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-ol compounds in the presence of triethylamine (0.5 equiv), are pseudo-octahedral with each RR′-admpzp ligand κ²-O,N(pyrazolyl) coordinated to the titanium center. In solution, 2a-c adopt isomeric structures that are in dynamic equilibrium. At 23 °C, 2a-c/1000 MAO catalyst systems furnished high molecular weight polymers with narrow molecular weight distributions (M_w/M_n = 2.7-2.8). At 100 °C, 2a-c/MAO catalyst systems exhibited increased polymerization activity and 2c/1000 MAO system furnished high molecular weight polyethylene with a molecular weight distribution (M_w/M_n = 2.1) that is close to that found for single-site catalysts.     

Various silyl-substituted cyclopentadienyl titanium complexes [CpSi(CH3)2X]TiCl3 as catalysts for syndiotactic polystyrene

Three silyl-substituted titanium trichloride complexes [CpSi(CH₃)₂X]TiCl₃ [X=Cl(1), Me(2), PhOMe(3)] were tested as catalyst precursors for the syndiospecific polymerization of styrene. The catalytic activity increased in the order 1 > 2 > 3. The highest activity was 2.42 × 10⁷ g s-PS/mol Ti mol S h using complex 1/MAO catalytic system at molar ratio of Al/Ti=2000. The effects of variation on polymerization temperature and Al/Ti ratio on the polymerization of styrene were also studied.     

A series of three-dimensional coordination polymers with general formula [{Ln(H2O)n}{Re6Te8(CN)6}] · xH2O (Ln = Eu,Gd, Tb,Dy, Ho,Er, Tm,Yb; n = 3, 4, x = 0, 2.5)

A series of new compounds containing rare earth cations (Eu to Yb) and paramagnetic cluster anion [Re₆Te₈(CN)₆]³⁻ was prepared and investigated. The X-ray structural analyses have revealed that the compounds [{Ln(H₂O)₄}{Re₆Te₈(CN)₆}] · 2.5H₂O; Ln = Eu (1), Tb (3), Dy (4), Ho (5), Er (6), Tm (7), [{Gd(H₂O)₃}{Re₆Te₈(CN)₆}] · 2.5H₂O (2) and [{Yb(H₂O)₄}{Re₆Te₈(CN)₆}] (8) are three-dimensional polymers based on Re–CN–Ln interactions. Measurements of magnetic susceptibility for 2 and 5 showed that effective magnetic moment (at 300 K) was 8.13 μ_B for compound 2 and 10.79 μ_B for compound 5 with weak antiferromagnetic ordering appeared at low temperatures.     

Dimeric and trimeric diorganosilicon chalcogenides (PhRSiE)2,3 (E = S, Se, Te; R = Ph, Me)

Ph₂SiCl₂ and PhMeSiCl₂ react with Li₂E (E = S, Se, Te) under formation of trimeric diorganosilicon chalcogenides (PhRSiE)₃ (R = Ph: 1a-3a, R = Me: cis/trans-4a (E = S), cis/trans-5a (E = Se)). In case of E = S, Se dimeric four-membered ring compounds (PhRSiE)₂ (R = Ph: 1b-2b, R = Me: cis/trans-4b (E = S), cis/trans-5b (E = Se)) have been observed as by-products. 1a-5b have been characterized by multinuclear NMR spectroscopy (¹H, ¹³C, ²⁹Si, ⁷⁷Se, ¹²⁵Te). Four- and six-membered ring compounds differ significantly in ²⁹Si and ⁷⁷Se chemical shifts as well as in the value of ¹J_SiSe.The molecular structures of 2a, 3a and trans-5a reported in this paper are the first examples of compounds with unfused six-membered rings Si₃E₃ (E = Se, Te). The Si₃E₃ rings adopt twisted boat conformations. The crystal structure of 3a reveals an intermolecular Te-Te contact of 3.858 Å which yields a dimerization in the solid state.     

Syntheses, crystal structures and DFT studies of [Me3EM(CO)5] (E = Sb, Bi; M = Cr, W), cis-[(Me3Sb)2Mo(CO)4], and [Bu3BiFe(CO)4]

Syntheses of [Me₃SbM(CO)₅] [M = Cr (1), W (2)], [Me₃BiM(CO)₅] [M = Cr (3), W (4)], cis-[(Me₃Sb)₂Mo(CO)₄] (5), [^tBu₃BiFe(CO)₄] (6), crystal structures of 1-6 and DFT studies of 1-4 are reported.     

Alkynylphosphanes as supports for mixed-metal Co4M (M = Ru, Os) fluoride complexes: Syntheses, structures and thermolysis studies

Treatment of the tetrameric group eight fluoride complexes [MF(μ-F)(CO)₃]₄ [M = Ru (1a), Os (1b)] with the alkynylphosphane, Ph₂PCCPh, results in fluoride-bridge cleavage and the formation of the air-sensitive monomeric octahedral complexes [MF₂(CO)₂(PPh₂CCPh)₂] [M = Ru (2a), Os (2b)] in high yield. The molecular structure of 2b reveals a cis, cis, trans configuration for each pair of ligands, respectively. The free alkyne moieties in 2 can be readily complexed to hexacarbonyldicobalt fragments by treatment with dicobalt octacarbonyl to afford [MF₂(CO)₂(μ-η¹:η²-PPh₂CCPh)₂{Co₂(CO)₆}₂] [M = Ru (3a), Os (3b)]. Evidence for an intramolecular non-bonded contact between a bound fluoride and a cobalt carbonyl carbon atom is seen in the molecular structure of 3a. Thermolysis of 3a at 50 °C results in fluoride dissociation to give [RuF(CO)₂(μ-η¹:η²-PPh₂CCPh)₂{Co₂(CO)₆}₂]⁺ (4), while no reaction occurred with the osmium analogue. Prolonged thermolysis at 120 °C in a sealed vessel of both 3a and 3b gave only insoluble decomposition products.     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

Novel octahedral nickel(II) dithiocarbamates with bi- or tetradentate N-donor ligands: X-ray structures of [Ni(Bzppzdtc)(phen)2]ClO4 · CHCl3 and [Ni(Bz2dtc)2(cyclam)]

A series of novel octahedral nickel(II) dithiocarbamate complexes involving bidentate nitrogen-donor ligands (phen = 1,10-phenanthroline, bpy = 2,2′-bipyridine) or a tetradentate ligand (cyclam = 1,4,8,11-tetraazacycloteradecane) of the composition [Ni(BzMetdtc)(phen)₂]ClO₄ (1), [Ni(Pe₂dtc)(phen)₂]ClO₄ (2), [Ni(Bzppzdtc)(phen)₂]ClO₄ · CHCl₃ (3), [Ni(Bzppzdtc)(phen)₂](SCN) (4), [Ni(BzMetdtc)(bpy)₂]ClO₄ · 2H₂O (5), [Ni(Pe₂dtc)(cyclam)]ClO₄ (6), [Ni(BzMetdtc)₂(cyclam)] (7), [Ni(Bz₂dtc)₂(cyclam)] (8) and [Ni(Bz₂dtc)₂(phen)] (9) (BzMetdtc = N,N-benzyl-methyldithiocarbamate(1-) anion, Pe₂dtc = N,N-dipentyldithiocarbamate(1-) anion, Bz₂dtc = N,N-dibenzyldithiocarbamate(1-) anion, Bzppzdtc = 4-benzylpiperazinedithiocarbamate(1-) anion), have been synthesized. Spectroscopic (electronic and infrared), magnetic moment and molar conductivity data, and thermal behaviour of the complexes are discussed. Single crystal X-ray analysis of 3 and 8 confirmed a distorted octahedral arrangement in the vicinity of the nickel atom with a N₄S₂ donor set. They represent the first X-ray structures of such type complexes. The catalytic influence of complexes 2, 3, 6, and 7 on graphite oxidation was studied and discussed.     

Synthesis and characterization of hetero-binuclear Co-Rh complexes [CpCoS2C2(B9H10)][Rh(COD)] and [CpCoSe2C2(B10H10)][Rh(COD)]

Two hetero-binuclear complexes [Cp^∗CoS₂C₂(B₉H₁₀)][Rh(COD)] (2a) and [Cp^∗CoSe₂C₂(B₁₀H₁₀)][Rh(COD)] (2b) [Cp^∗ = η⁵-pentamethylcyclopentadienyl, COD = cyclo-octa-1,5-diene (C₈H₁₂)] were synthesized by the reactions of half-sandwich complexes [Cp^∗CoE₂C₂(B₁₀H₁₀)] [E = S (1a), Se (1b)] with low valent transition metal complexes [Rh(COD)(OEt)]₂ and [Rh(COD)(OMe)]₂. Although the reaction conditions are the same, the structures of two products for dithiolato carborane and diselenolato carborane are different. The cage of the carborane in 2a was opened; However, the carborane cage in 2b was intact. Complexes 2a and 2b have been fully characterized by ¹H, ¹¹B NMR and IR spectroscopy, as well as by elemental analyses. The molecular structures of 2a and 2b have been determined by single-crystal X-ray diffraction analyses and strong metal-metal interactions between cobalt and rhodium atoms (2.6260 Å (2a) and 2.7057 Å (2b)) are existent.     

Synthesis, characterization, and substituent effects of mononuclear ruthenium complexes [RuCl(CO)(PMe3)3(CHCH-C6H4-R-p)] (R = H, CH3, OCH3, NO2, NH2, NMe2)

A series of mononuclear ruthenium complexes [RuCl(CO)(PMe₃)₃(CHCH-C₆H₄-R-p)] (R = H (2a), CH₃ (2b), OCH₃ (2c), NO₂ (2d), NH₂ (2e), NMe₂ (2f)) has been prepared. The respective products have been characterized by elemental analyses, NMR spectrometry, and UV-Vis spectrophotometry. The structures of complexes 2c and 2d have been established by X-ray crystallography. Electrochemical studies have revealed that electron-releasing substituents facilitate monometallic ruthenium complex oxidation, and the substituent parameter values (σ) show a strong linear correlation with the anodic half-wave or oxidation peak potentials of the complexes.     

Synthesis, structures and preliminary biological screening of bis(diphenyl)chlorotin complexes and adducts: Ph2ClSn-CH2-R-CH2-SnClPh2, R = p-C6H4, CH2CH2

The reaction between ClCH₂-R-CH₂Cl, R = p-C₆H₄, and [Ph₃Sn]⁻Li⁺ yields Ph₃Sn-CH₂-R-CH₂-SnPh₃ (1) in high yield. The related known compound R = CH₂CH₂ (1a) is synthesized by the reaction of the di-Grignard reagent BrMg(CH₂)₄MgBr with two equivalents of Ph₃SnCl. Cleavage of a single Sn-Ph group at each tin centre of both compounds using HCl/Et₂O yields the corresponding bis-chlorostannanes Ph₂ClSn-CH₂-R-CH₂-SnClPh₂, R = (CH₂)₄ (2) and R = C₆H₄ (3), respectively. Compounds 1, 2 and 3 are crystalline solid materials and their single crystal X-ray structures are reported. In the solid state both 2 and 3 form self-assembled ladder structures involving alternating intermolecular Cl-Sn?Cl and Cl?Sn-Cl bonded chains at both ends of the distannanes with 5-coordinate tin atoms. Recrystallization of 3 from CH₂Cl₂ in the presence of DMF yields the bis-DMF adduct (4) in which no self-assembled structures were noted. Evaluation of the chlorostannanes 2 and 3 against a suite of bacteria, Staphylococcus aureus, Escherichia coli and Photobacterium phosphoreum is reported and compared to the related mono-chlorostannanes Ph₂(CH₃)SnCl and Ph₂(PhCH₂)SnCl.     

Chemically modified oximato complexes of titanium(IV) isopropoxide as new precursors for the sol-gel preparation of nano-sized titania: Crystal and molecular structure of [Ti{ONC10H16}4·2CH2Cl2]

Reactions of [Ti(OPrⁱ)₄] with various oximes, in anhydrous refluxing benzene yielded complexes of the type [Ti{OPrⁱ}_4−n{L}_n], where, n = 1-4 and LH = (CH₃)₂CNOH (1-4), C₉H₁₆CNOH (5-8) and C₉H₁₈CNOH (9-12). The compounds were characterized by elemental analyses, molecular weight measurements, FAB-mass, FT-IR and NMR (¹H, ¹³C{¹H}) spectral studies. The FAB-mass spectra of mono- (1), and di- (2), (6), (10) substituted products indicate their dimeric nature and that of tri- (3) and tetra- (4), (8) substituted derivatives suggest their monomeric nature. Crystal and molecular structure of [Ti{ONC₁₀H₁₆}₄·2CH₂Cl₂] (8A) suggests that the oximato ligands bind the metal in a dihapto η²-(N, O) manner, leading to the formation of an eight coordinated species. Thermogravimetric curves of (3), (6) and (10) exhibit multi-step decomposition with the formation of TiO₂ as the final product in each case, at 900 °C. Low temperature (∼600 °C) sol-gel transformations of (2), (3), (4), (6), (7) and (8) yielded nano-sized titania (a), (b), (c), (d), (e) and (f), respectively. Formation of anatase phase in all the titania samples was confirmed by powder XRD patterns, FT-IR and Raman spectroscopy. SEM images of (a), (b), (c), (d), (e) and (f) exhibit formation of nano-grains with agglomer like surface morphologies. Compositions of all the titania samples were investigated by EDX analyses. The absorption spectra of the two representative samples, (a) and (f) indicate an energy band gap of 3.17 eV and 3.75 eV, respectively.     

Synthesis, characterization, and catalytic activities in syndiospecific polymerization of styrene for half-sandwich titanium complexes with non-Cp tridentate dianionic ligands MeN(CH2CR2O)2

New half-titanocenes, Cp^∗TiCl[(OCR₂CH₂)NMe(CH₂CR^′₂O)] [R,R′ = H (1), R,R′ = Me, H, (2), R,R′ = Me (3)], were prepared from Cp^∗TiCl₃ (4) with the corresponding alcohols in the presence of triethylamine. X-ray analysis shows that 1 has slightly distorted trigonal bipyramidal geometry around Ti. These complexes exhibited moderate catalytic activities for syndiospecific styrene polymerization in the presence of MAO and the activity increased in the order: 2 > 1 > 4 > 3 (at 50 °C), 1 > 2 > 4 > 3 (at 70 °C and 90 °C).     

Monomeric and dimeric ruthenium thiooxalate complexes: Structures of CpRu(PPh3)2SCOCO2Me and CpRu(dppe)SCOCO2Et

The hydrosulfido complexes CpRu(L)(L′)SH react with one equivalent of O-alkyl oxalyl chlorides (ROCOCOCl) to form the corresponding O-alkylthiooxalate complexes CpRu(L)(L′)SCOCO₂R (L = L′ = PPh₃ (1), (2); L = PPh₃, L′ = CO (3); R = Me (a), Et (b)). The reactions of the hydrosulfido complexes with half equivalent of oxalyl chloride produce the bimetallic complexes [CpRu(L)(L′)SCO]₂ (L = L′ = PPh₃ (4), (5); L = PPh₃, L′ = CO (6)). The crystal structures of CpRu(PPh₃)₂SCOCO₂Me (1a) and CpRu(dppe)SCOCO₂Et (2b) are reported.     

Synthesis,structure and properties of [ML(NO3)2]: M = Co,Ni, Cu; L = N-(2-pyridylethyl)pyridine-2-carbaldimine

Syntheses of complexes of the type [ML(NO₃)₂], where M = Co(II), Ni(II), and Cu(II), L = N-(2-pyridylethyl)pyridine-2-carbaldimine, a tridentate ligand, are described. They were characterized by elemental analysis, spectral, magnetic, thermal studies, and X-ray crystallography. In the cobalt (1), nickel (2), and copper (3) complexes, the bivalent metal ion is coordinated by the three nitrogen atoms of the tridentate L with two pyridine-N groups occupying trans positions. Amongst the two nitrates one coordinates in a bidentate fashion while the other adopts a monodentate fashion. The X-band EPR spectra of 1, 2, and 3 in the polycrystalline state and in acetonitrile solution at 77 K are reported. Room temperature vibrating sample magnetometer data of 1, 2, and 3 afforded μ_eff values respectively of 3.928, 3.897, and 1.952 BM. The thermal stability order is 1 > 2 > 3, showing a reverse Irving-Williams trend.     

Formation and structural characterization of mercury complexes from Te(R)CH2SiMe3 (R = Ph, CH2SiMe3) and HgCl2

The reaction of HgCl₂ and Te(R)CH₂SiMe₃ [R = CH₂SiMe₃ (1), Ph (2)] in ethanol yielded a mononuclear complex [HgCl₂{Te(R)CH₂SiMe₃}₂] (R = Ph, 3a; R = CH₂SiMe₃, 3b). The recrystallization of 3a or 3b from CH₂Cl₂ produced a dinuclear complex [Hg₂Cl₂(μ-Cl)₂{Te(R)CH₂SiMe₃}₂] (R = Ph, 4a; R = CH₂SiMe₃, 4b). When 3a was dissolved in CH₂Cl₂, the solvent quickly removed, and the solid recrystallized from EtOH, a stable ionic [HgCl{Te(Ph)CH₂SiMe₃}₃]Cl·2EtOH (5a·2EtOH) was obtained. Crystals of [HgCl₂{Te(CH₂SiMe)₂}]·2HgCl₂·CH₂Cl₂ (6b·2HgCl₂·CH₂Cl₂) were obtained from the CH₂Cl₂ solution of 3b upon prolonged standing. The complex formation was monitored by ¹²⁵Te-, and ¹⁹⁹Hg NMR spectroscopy, and the crystal structures of the complexes were determined by single crystal X-ray crystallography.     

Tris(4-hydroxy-3,5-diisopropylbenzyl)amine as a new bridging ligand for novel trinuclear titanium complexes

Tris(4-hydroxy-3,5-diisopropylbenzyl)amine (LH₃) was synthesized by the reaction of 2,6-diisopropylphenol and hexamethylenetetramine in the presence of p-toluenesulfonic acid or paraformaldehyde. Its solid state structure was determined by single crystal X-ray diffraction. Its fully deprotonated specie, (4-O-3,5-i-Pr₂PhCH₂)₃N (L), was used to form novel trinuclear half-sandwich titanocene complexes, namely [(η⁵-C₅Me₅)TiCl₂]₃L (1) and [(η⁵-C₅Me₅)Ti(OMe)₂]₃L (2), which were then tested for the syndiospecific polymerization of styrene in the presence of methylaluminoxane (MAO) cocatalyst. Their catalytic properties were directly compared with those of trichloro(pentamethylcyclopentadienyl)titanium(IV) (3) and dichloro(2,6-diisopropylphenolato)(pentamethylcyclopentadienyl)titanium(IV) (4). 1/MAO and 2/MAO systems showed higher activities towards styrene polymerization than the mononuclear catalytic systems 3/MAO and 4/MAO, giving syndiotactic polystyrene of high molecular weight.     

Synthesis and characterisation of six Fe(II or III), Co(II) or Zr(IV) complexes containing the ligand [CH(SiMe2R)P(Ph)2NSiMe3] (R = Me, NEt2) and of [Co{N(SiMe3)C(Ph)C(H)P(Ph)2NSiMe3}2]

The C,N-(trimethylsilyliminodiphenylphosphoranyl)silylmethylmetal complexes [Fe(L)₂] (3), [Co(L)₂] (4), [ZrCl₃(L)]·0.83CH₂Cl₂ (5), [Fe(L)₃] (6), [Fe(L′)₂] (7) and [Co(L′)₂] (8) have been prepared from the lithium compound Li[CH(SiMe₂R)P(Ph)₂NSiMe₃] [1a, (R = Me) {≡ Li(L)}; 1b, (R = NEt₂) {≡ Li(L′)}] and the appropriate metal chloride (or for 7, FeCl₃). From Li[N(SiMe₃)C(Ph)C(H)P(Ph)₂NSiMe₃] [≡ Li(L″)] (2), prepared in situ from Li(L) (1a) and PhCN, and CoCl₂ there was obtained bis(3-trimethylsilylimino- diphenylphosphoranyl-2-phenyl-N-trimethylsilyl-1-azaallyl-N,N′)cobalt(II) (9). These crystalline complexes 3-9 were characterised by their mass spectra, microanalyses, high spin magnetic moments (not 5) and for 5 multinuclear NMR solution spectra. The X-ray structure of 3 showed it to be a pseudotetrahedral bis(chelate), the iron atom at the spiro junction.     

New orthopalladated complexes of phosphorus ylides: Crystal structure of [Pd{CH{P(C7H6)(p-tolyl)2}COCH3}Cl{P(p-tolyl)3}]

This work reports on the preparation of the complexes [PdCl₂(Y¹)₂], [PdCl₂(Y²)₂] (Y¹ = (p-tolyl)₃PCHCOCH₃ (1a); Y² = Ph₃PCHCO₂CH₂Ph (1b)), [Pd{CHP(C₇H₆)(p-tolyl)₂COCH₃}(μ-Cl)]₂ (2a), [Pd{CHP(C₆H₄)Ph₂CO₂CH₂Ph}(μ-Cl)]₂ (2b), [Pd{CH{P(C₇H₆)(p-tolyl)₂}COCH₃}Cl(L)] (L = PPh₃ (3a), P(p-tolyl)₃ (4a)) and [Pd{CH{P(C₆H₄)Ph₂}CO₂CH₂Ph}Cl(L)] (L = PPh₃ (3b), P(p-tolyl)₃ (4b)). Orthometallation and ylide C-coordination in complexes 2a–4b are demonstrated by an X-ray diffraction study of 4a.