Synthesis, structure, and catalytic activity of rhodium complexes with new chiral binaphthyl-based NHC-ligands

Three new chiral NHC-rhodium complexes have been prepared from the reactions between [Rh(COD)Cl]₂, NaOAc, KI, and dibenzimidazolium salts 3, 4 or 5, which are derived from (S)-2,2′-diamino-1,1′-binaphthyl. The steric and electronic effects of the ligand play an important role in the complex formation. For example, treatment of pyridine substituted dibenzimidazolium salts 3 or 4 with 0.5 equiv of [Rh(COD)Cl]₂ in the presence of NaOAc and KI in CH₃CN at 85 °C gives the chiral Rh(III) complexes 6 and 7, respectively. However, under similar reaction conditions, pyridine-N-oxide substituted dibenzimidazolium salt 5 affords a binuclear Rh(I) complex 8. All compounds have been characterized by various spectroscopic techniques, and elemental analyses. The solid-state structures of compounds 4-8 have been further confirmed by X-ray diffraction analyses. Rhodium complexes 6-8 show good catalytic activity for the asymmetric hydrosilylation of acetophenone with moderate ee values.     

Formation, structure, and reactivities of 1:1 adducts between quadricyclane and (η-cyclopentadienyl)(1,2-diphenyl- or -dimethoxycarbonyl-1,2-ethenedithiolato)rhodium(III)

The rhodiadithiolene complexes [Rh(Cp)(S₂C₂Z₂)] (Z=Ph (1a) and COOMe (1b)) reacted with quadricyclane (Q) to give 1:1 adducts [Rh(Cp)(S₂C₂Z₂) (C₇H₈)] (Z=Ph (2a) and COOMe (2b)) in which Rh and S of the complexes are bridged by C(7) (bridge carbons) and C(5) (edge carbons) of norbornene (C₇H₈), respectively. The structure of the adduct 2a was re-investigated and determined by X-ray structural analysis. The rhodiadithiolene complexes and those adducts showed the catalytic activities for the thermal isomerization from Q to norbornadiene (NBD). Adduct 2a photochemically dissociated to give the original complex 1a and NBD upon irradiation with a high-pressure mercury lamp. Skeletal rearrangements of the hydrocarbon moiety were confirmed in the formation of these adducts and in their photo-dissociation, according to deuterium labeling experiments.     

Synthesis, characterization, and catalytic application of a new chiral P,N-indene ligand derived from (R)-BINOL

Lithiation of 2-dimethylaminoindene followed by quenching with [(R)-(1,1′-binaphthalene-2,2′-diyl)]chlorophosphite and treatment with triethylamine afforded the crystallographically characterized enantiopure P,N-indene 3 in 71% isolated yield. In the course of rhodium coordination chemistry studies involving 3, the formation of the isolable complex [(κ²-P,N-3)(κ¹-P,N-3)RhCl] (7) (81%) was observed, thereby confirming the propensity of this new ligand to form L_nRh(3)₂ complexes. Such coordination chemistry behavior may contribute in part to the generally poor catalytic performance exhibited by mixtures of 3 and rhodium precursor complexes in the asymmetric hydrogenation and hydrosilylation studies described herein.     

Synthesis and X-ray structures of new chiral Ag(I) complexes with biaryl-based N4-donor ligands

Condensation of (R)-2,2′-diamino-1,1′-binaphthyl or (R)-6,6′-dimethylbiphenyl-2,2′-diamine with 2 equiv of 2-pyridine carboxaldehyde in toluene in the presence of molecular sieves at 70 °C gives (R)-N,N′-bis(pyridin-2-ylmethylene)-1,1′-binaphthyl-2,2′-diimine (1), and (R)-N,N′-bis(pyridin-2-ylmethylene)-6,6′-dimethylbiphenyl-2,2′-diimine (3), respectively, in good yields. Reduction of 1 with an excess of NaBH₄ in a solvent mixture of MeOH and toluene (1:1) at 50 °C gives (R)-N,N′-bis(pyridin-2-ylmethyl)-1,1′-binaphthyl-2,2′-diamine (2) in 95% yield. Rigidity plays an important role in the formation of helicate silver(I) complexes. Treatment of 1, or 3 with 1 equiv of AgNO₃ in mixed solvents of MeOH and CH₂Cl₂ (1:4) gives the chiral, dinuclear double helicate Ag(I) complexes [Ag₂(1)₂][NO₃]₂ (4) and [Ag₂(3)₂][NO₃]₂ · 2H₂O (6), respectively, in good yields. While under the similar reaction conditions, reaction of 2 with 1 equiv of AgNO₃ affords the chiral, mononuclear single helicate Ag(I) complex [Ag(2)][NO₃] (5) in 90% yield. [Ag₂(1)₂][NO₃]₂ (4) can further react with excess AgNO₃ to give [Ag₂(1)₂]₃[NO₃]₂[Ag(CH₃OH)(NO₃)₃]₂ · 2CH₃OH (7) in 75% yield. All compounds have been fully characterized by various spectroscopic techniques and elemental analyses. Compounds 1 and 5-7 have been further subjected to single-crystal X-ray diffraction analyses.     

Resolution of BIPHEP on Rh with a chiral diene auxiliary

Resolution of the atropisomeric chiral BIPHEP ligand on Rh has been achieved with the aid of 2-(4-tert-butyl-phenyl)-8-methoxy-1,8-dimethyl-bicyclo[2.2.2]octa-2,5-diene, a chiral chelating diene ligand. The diene complex 3 containing an (S)-BIPHEP ligand was found to be configurationally stable in CDCl₃ solution at RT. Conversion of the diene complex 3 to a dicarbonyl Rh complex 4 that had a barrier of 25.0 kcal/mol for atropisomerization of the BIPHEP ligand. Preliminary studies of the use of the resolved complex 3 for catalysis are presented.     

Synthesis and reactivity of rhodium fluoro complexes

[RhH(CO)(PPh₃)₂] (1) reacts with Et₃N·3HF to give the fluoro compound [RhF(CO)(PPh₃)₂] (2). In a comparable reaction [RhF(PEt₃)₃] (5) has been obtained from [RhH(PEt₃)₃] (3) or [RhH(PEt₃)₄] (4) with substoichiometric amounts of Et₃N·3HF in THF. If the latter reaction is carried out in benzene, the complexes 5, cis-mer-[Rh(H)₂F(PEt₃)₃] (6) and cis-fac-[Rh(H)₂F(PEt₃)₃] (7) are obtained. Treatment of 5 with HCl in ether effects the generation of [RhCl(PEt₃)₃] (8) and the bifluoride compound [Rh(FHF)(PEt₃)₃] (9), which can be converted into 5 in the presence of Et₃N and Cs₂CO₃. Treatment of 5 with HSiR₂Ph (R=Ph, Me) leads to the formation of 3 and the rhodium(III) silyl complexes fac-[Rh(H)₂(SiR₂Ph)(PEt₃)₃] (10: R=Ph, 11: R=Me).     

Synthesis and application of monoterpene-based chiral aminodiols

Primary, secondary and tertiary aminodiols were synthetized regio- and stereoselectively from (−)-α-pinene 1 via α-pinene oxide 2, (−)-trans-pinocarveol 3 and key intermediate epoxy alcohol 4. N-Benzyl derivative 5 was transformed to spiro-fused oxazolidine 13 in a highly regioselective ring closure. Aminodiols and their derivatives 5-13 were applied as chiral catalysts in the enantioselective addition of diethylzinc to benzaldehyde, resulting in chiral 1-phenyl-1-propanol. The substituent effect on the nitrogen was studied in detail and the best enantioselectivity was observed in the case of N-methyl-N-benzyl-substituted derivative 8. The phenomenon was interpreted by using molecular modelling at an ab initio level.     

Stabilization of the labile metal configuration in halfsandwich complexes [CpRh(PN)Hal]X

PN ligands 3 and 4, derived from 2-diphenylphosphanylmethylpyridine 2a, were synthesized, to which in the backbone a tether to a cyclopentadiene system and for comparison an ⁱPr substituent were attached. The chiral compounds were resolved by introduction of a menthoxy substituent into the 2-position of the pyridine system and/or palladium complexes with enantiomerically pure co-ligands. The tripod ligand 3b contains three different binding sites (Cp, P, N) connected by a resolved chiral carbon atom. (S_C)-configuration of this tripod ligand enforces (R_Rh)-configuration at the metal atom in the halfsandwich rhodium complex (L_Ment,S_C,R_Rh)-7b. The opposite metal configuration is inaccessible. Substitution of the chloro ligand in (L_Ment,S_C,R_Rh)-7b by halide (Br, I) or pseudohalide (N₃, CN, SCN) ligands occurs with retention of configuration to give complexes 8b-11b. However, in the reaction of (L_Ment,S_C,R_Rh)-7b with PPh₃ the pyridine arm of the tripod ligand in compound 13b becomes detached from the metal atom. In the Cp*Rh and CpRh compounds of the bidentate PN ligands 4a and 4b both metal configurations are accessible and in complexes 14a-17a and 14b-17b they equilibrate fast. The stereochemical assignments are corroborated by 9 X-ray analyses.     

Synthesis and reactivity of rhodium(III) pentamethylcyclopentadienyl complexes of N-B-PTA(BH3): X-ray crystal structures of [CpRhCl2{N-B}-PTA(BH3)] and [CpRh{N-B-PTA(BH3)}(η-CH2 = CHPh)]

The reaction between 1-boranyl-1,3,5-triaza-7-phosphaadamantane ligand N-B-PTA(BH₃) and [Cp^∗RhCl(μ-Cl)]₂ affords [Cp^∗Rh{N-B-PTA(BH₃)}Cl₂] (3) or [Cp_∗Rh{N-B-PTA(BH₃)}₂Cl]Cl (5) containing one or two P-bonded boronated PTA ligands. The hydride [Cp_∗Rh{N-B-PTA(BH₃)}H₂] (8) was also obtained by reaction of 3 with NaBH₄ and alternatively by direct hydroboration of [Cp^∗Rh(PTA)Cl₂] with excess NaBH₄. Moderately slow hydrolysis of the N-boranyl rhodium complexes affords dihydrogen, H₃BO₃ and the corresponding PTA derivatives, including the water-soluble dihydride [Cp^∗Rh(PTA)H₂] (9). Finally, the reaction of 8 with electron poor alkynes gives the alkene complexes [Cp^∗Rh{N-B-PTA(BH₃)}(η²-CH₂ = CHR)] (R = Ph, 10; C(O)OEt, 11) as a mixture of rotamers η²-coordinated to rhodium without affecting the N-BH₃ moiety. The X-ray crystal structures of 3 and 10 were also obtained and are here discussed.     

Stereoselective synthesis of 3-substituted tetrahydroisoquinolines from phthalan and chiral N-sulfinylimines

The reaction of the dianionic intermediate [resulting from the reductive opening of phthalan (1) with lithium] with chiral N-tert-butylsulfinyl aldimines 3 in the presence of ZnMe₂ gives, after hydrolysis, N-tert-butylsulfinyl amino alcohols 4 with high diastereoselectivity. Successive treatment of compounds 4 with hydrogen chloride in methanol, thionyl chloride in chloroform and sodium hydroxide yields 3-substituted tetrahydroisoquinolines 6.     

The role of chiral dopants in organic/inorganic hybrid materials containing chiral Schiff base Ni(II), Cu(II) and Zn(II) complexes

Chiral Schiff base complexes containing azo-groups, bis(N-R-1-cyclohexylethyl-4-phenyldiazenylsalicydenaminato) nickel(II), copper(II) and zinc(II) complexes, and without azo-groups, bis(N-R-1-cyclohexylethyl-3,5-dichlorosalicydenaminato) nickel(II), copper(II) and zinc(II) complexes, affording a distorted square planar trans-[MN₂O₂] coordination geometry were prepared. Organic/inorganic hybrid materials in polymethylmethacrylate (PMMA) spincoat films of the complexes (both the azobenzene (AZ) containing type and the latter complexes of the AZ separated type) were assembled for a comparison of polarized UV light induced molecular arrangement caused by the Weigert effect. Investigation of the parameters for the optical anisotropy of the metal complexes as well as AZ suggested that the degree of increasing optical anisotropy of the containing type was higher than that of the separated type based on π-π^∗ (of which a characteristic band appeared around 380 nm) and n-π^∗ bands of polarized absorption electronic spectra. In the AZ containing type, the rigid nickel(II) or zinc(II) complexes easily increase the optical anisotropy compared to the flexible copper(II) complexes. In the AZ separated type, interestingly, enhancement of some CD bands suggests the role of chiral dopants of some complexes without azo-groups for AZ.     

A novel reaction producing the rhodium(I) complexes with π-coordinated tetraphenylborate anion, (π-PhBPh3). X-ray study of [Rh(PPh3)2(π-PhBPh3)]

Treating the complexes [Rh(TFA)(PPh₃)₂], [Rh(HFA)(PPh₃)₂], and [Rh(TFA)(Cod)] (TFA - trifluoroacetylacetonate, HFA - hexafluoroacetylacetonate, Cod - 1,5 cyclooctadiene) with an excess of NaBPh₄ in acetonitrile yields the rhodium(I) complexes with coordinated [BPh₄]⁻ anion, [Rh(PPh₃)₂(π-PhBPh₃)] · 2MeCN (I) and [Rh(Cod)(π-PhBPh₃)] (II). The reactions present a new example of β-diketonate ligand replacement. The ¹H, ³¹P, and ¹¹B NMR spectra of I and II are discussed. [Rh(PPh₃)₂(π-PhBPh₃)] has been characterized by single crystal X-ray analysis.     

Aminobis(phenolate)s of imidomolybdenum(VI) and -tungsten(VI)

The reactions of trans-[MoO(ONO^Me)Cl₂] 1 (ONO^Me = methylamino-N,N-bis(2-methylene-4,6-dimethylphenolate) dianion) and trans-[MoO(ONO^tBu)Cl₂] 2 (ONO^tBu = methylamino-N,N-bis(2-methylene-4-methyl-6-tert-butylphenolate) dianion) with PhNCO afforded new imido molybdenum complexes trans-[Mo(NPh)(ONO^Me)Cl₂] 3 and trans-[Mo(NPh)(ONO^tBu)Cl₂] 4, respectively. As analogous oxotungsten starting materials did not show similar reactivity, corresponding imido tungsten complexes were prepared by the reaction between [W(NPh)Cl₄] with aminobis(phenol)s. These reactions yielded cis- and trans-isomers of dichloro complexes [W(NPh)(ONO^Me)Cl₂] 5 and [W(NPh)(ONO^tBu)Cl₂] 6, respectively. The molecular structures of 4, cis-6 and trans-6 were verified by X-ray crystallography. Organosubstituted imido tungsten(VI) complex cis-[W(NPh)(ONO^tBu)Me₂] 7 was prepared by the transmetallation reaction of 6 (either cis or trans isomer) with methyl magnesium iodide.     

Diastereoselective schenck ene reaction of singlet oxygen with chiral allylic alcohols; access to enantiomerically enriched 1,2,4-trioxanes

A series of antimalarial chiral 1,2,4-trioxanes (1-8) were synthesised in high enantiomeric purities. Enantioselective addition of R₂Zn reagent to 3-methyl-2-butenal catalysed by (+)-MIB or (−)-MIB yielded both the enantiomers of the chiral allylic alcohols 9-11 (90-98% ee), which were subjected to diastereoselective photooxygenation in the presence of tetraphenylporphine (TPP) to obtain (R,R)-threo- or (S,S)-threo-β-hydroperoxy alcohols (12-14). Reaction of β-hydroperoxy alcohols (12-14) with different cyclic ketones produced optically active trioxanes 1-8.     

Stereospecific synthesis of chiral tertiary alkyl-aryl ethers via Mitsunobu reaction with complete inversion of configuration

Mitsunobu reaction of chiral tertiary alcohol (S)-2 with phenol 3 provides the desired ether (R)-1 in moderate yields at elevated temperatures (80-100°C). The S_N2 displacement pathway is evident by complete inversion of the (S)-alcohol to (R)-ether.     

Lutetium gets a crown: Synthesis, structure and reaction chemistry of the separated ion pair complex, [Li(12-crown-4)2][(C5Me5)2LuMe2]

Reaction of (C₅Me₅)₂Lu(Me)(μ-Me)Li(THF)₃ (2) with excess 12-crown-4 affords the new separated ion pair complex, [Li(12-crown-4)₂][(C₅Me₅)₂LuMe₂] (3), in excellent yield. This complex reacts with 2,6-diisopropylaniline and phenylacetylene to give the methyl amide complex [Li(12-crown-4)₂][(C₅Me₅)₂Lu(Me)(NH-2,6-ⁱPr₂C₆H₃)] (4) and the bis(acetylide) complex [Li(12-crown-4)₂][(C₅Me₅)₂Lu(C≡C-Ph)₂] (5), respectively. Attempts to promote methane loss from complexes 3 and 4 to generate a lutetium methylidene or imido complex, respectively, were unsuccessful. The ability of the bis(acetylide) complex 5 to act as a π-tweezer complex was also explored. Reaction between [Li(12-crown-4)₂][(C₅Me₅)₂Lu(C≡C-Ph)₂] (5) and CuSPh gave only intractable lutetium products and the copper(I) species [Li(12-crown-4)₂][Cu(C≡C-Ph)₂] (8). The new lutetium complexes have been characterized by elemental analysis and NMR spectroscopy. Finally, the X-ray crystal structures of (C₅Me₅)₂Lu(Me)(μ-Me)Li(THF)₃ (2), [Li(12-crown-4)₂][(C₅Me₅)₂LuMe₂] (3), [Li(12-crown-4)₂][(C₅Me₅)₂Lu(Me)(NH-2,6-ⁱPr₂C₆H₃)] (4), [Li(12-crown-4)₂][(C₅Me₅)₂Lu(C≡C-Ph)₂] (5), and [Li(12-crown-4)₂][Cu(C≡C-Ph)₂] (8) are also reported.     

Generation of Ir-Sn and Rh-Sn bonds from the oxidative addition of tin(IV) halides to [Ir(μ-Cl)(1,5-COD)]2 and [Rh(μ-Cl)(1,5-COD)]2

Facile oxidative addition of SnCl₄, MeSnCl₃, and SnBr₄ across Ir(I) and Rh(I) cyclooctadiene complexes resulted in the formation of the corresponding Ir-Sn and Rh-Sn heterobimetallic complexes. Treatment of SnCl₄ with [Ir(COD)(μ-Cl)]₂ and [Rh(COD)(μ-Cl)]₂ afforded [Ir(COD)(μ-Cl)Cl(SnCl₃)]₂ (1) and [Rh(COD)(μ-Cl)Cl(SnCl₃)]₂ (2), respectively. Reaction of the organotin halide MeSnCl₃ with [Ir(COD)(μ-Cl)]₂ led to the formation of [Ir(COD)(μ-Cl)Cl(MeSnCl₂)]₂ (3). The reaction of SnBr₄ to Ir^I and Rh^I precursors gave [Ir(COD)(μ-Br)Br(SnBr₃)]₂ (4) and [Rh(COD)(μ-Br)Br(SnBr₃)]₂ (5) respectively, which indicates halide exchange at post-oxidative addition stage. The structures of complexes 1-5 were confirmed by X-ray crystallography. A cis-addition of Sn-X bond across Ir^I/Rh^I is proposed from the analysis of the geometrical features of “X-M-Sn” triangular units in 1-5.     

Synthesis and characterization of new Rh complexes bearing CO, PPh3 and chelating P,O- or Se,Se-ligands: Application to hydroformylation of styrene

The complexes [Rh(CO)(PPh₃){Ph₂PNP(O)Ph₂-P,O}] (3), [Rh(CO)₂{Ph₂P(Se)NP(Se)Ph₂-Se,Se′}] (5), and [Rh(CO)(PPh₃){Ph₂P(Se)NP(Se)Ph₂-Se,Se′}] (6), were synthesised by stepwise reactions of CO and PPh₃ with [Rh(cod){Ph₂PNP(O)Ph₂-P,O}] (2) and [Rh(cod){Ph₂P(Se)NP(Se)Ph₂-Se,Se′}] (4), respectively. The complexes 3, 5 and 6 have been studied by IR, as well as ¹H and ³¹P NMR spectroscopy. The ν(CO) bands of complexes 3 and 6 appear at approximately 1960 cm⁻¹, indicating high electron density at the Rh^I centre. The structure of complexes 3 and 6 has been determined by X-ray crystallography, and the ³¹P NMR chemical shifts have been resolved via low temperature NMR experiments. Both complexes exhibit square planar geometry around the metal centre, with the five-membered ring of complex 3 being almost planar, and the six-membered ring of complex 6 adopting a slightly distorted boat conformation. The C-O bond of the carbonyl ligand is relatively weak in both complexes, due to strong π-back donation from the electron rich Rh^I centre. The catalytic activity of the complexes 2, 3 and 6 in the hydroformylation of styrene has been investigated. Complexes 2 and 3 showed satisfactory catalytic properties, whereas complex 6 had effectively no catalytic activity.     

A new type of chiral porphyrin: Organopalladium porphyrins with chiral chelating diphosphine ligands

Peripherally palladated Ni(II) porphyrins have been prepared using enantiopure chiral chelating diphosphines as supporting ligands on the attached Pd(II) fragment. Both enantiomers of the following complexes have been obtained in good yields, using oxidative addition of the bromoporphyrin starting material 5-bromo-10,20-diphenylporphyrinatonickel(II) (NiDPPBr (1)) to the [Pd⁰L] complex generated in situ from Pd₂dba₃ and the chiral ligand L: [PdBr(NiDPP)(CHIRAPHOS)] (2a,b) [CHIRAPHOS = 2,3-bis(diphenylphosphino)butane], [PdBr(NiDPP)(Tol-BINAP)] (3a,b) [Tol-BINAP) = 2,2′-bis(di-p-tolylphosphino)-1,1′-binaphthyl] and [PdBr(NiDPP)(diphos)] [diphos = 1,2-bis(methylphenylphosphino)benzene] (4a,b). The induced asymmetry in the porphyrin was readily detected by ¹H NMR and CD spectroscopy. The porphyrin chiroptical properties are strongly dependent upon the structure of the chiral ligand, such that a monosignate CD signal, and symmetric and asymmetric exciton couplets were observed for 4a, 2b, and 3a,b, respectively.     

The investigation of stereogenic properties of cyclotriphosphazene derivatives with two different chiral centres

Hexachlorocyclotriphosphazene N₃P₃Cl₆ and gem-disubstituted cyclotriphosphazene derivatives N₃P₃Cl₄X₂ (X = Ph, PhS, PhNH) were reacted with N-methyl-1,3-propanediamine and 3-amino-1-propanol to give compounds (9a-12a, 9b-12b) which exist as cis and trans geometric isomers and are two different racemic isomers, respectively to describe the stereogenic properties of a series of chiral cyclotriphosphazene compounds with two different centres of chirality. The geometric isomers were separated by column chromatography on silica gel and analysed by elemental analysis, mass spectrometry, and ³¹P and ¹H NMR spectroscopies, and also the geometric forms (cis or trans) of 9b, 10a, 11a, 11b and 12a have been determined by the X-ray crystallography. The enantiomers of all racemic compounds have been analysed by the changes in ³¹P NMR spectra on addition of a Chiral Solvating Agent (CSA), (R)-(+)-2,2,2-trifluoro-1-(9′-anthryl)ethanol. On the other hand, the racemic forms of chiral cyclotriphosphazene derivatives have been confirmed by contribution of chiral HPLC methods which have been developed for this study.