Synthesis and characterization of phenylacetylene-terminated poly(silyleneethynylene-4,4′-phenylethereneethynylene)s

Two kinds of phenylacetylene-terminated poly(silyleneethynylene-4,4′-phenylethereneethynylene)s, {C₆H₅CC[Si(R)₂CCC₆H₄OC₆H₄CC]_nC₆H₅} wherein R represents methyl or phenyl, were synthesized by condensation reaction between dichlorosilanes and 4,4′-diethynyldiphenyl ether using organomagnesium reagents. The polymers were characterized by NMR, IR, gel permeation chromatography, thermogravimetric analysis, and differential scattering calorimetry.     

Iron(II) and iron(III) complexes containing ethynyl thiophene fragments

The synthesis of the new complexes Cp*(dppe)FeCC2,5-C₄H₂SR (Cp* = 1,2,3,4,5-pentamethylcyclopentadienyl; dppe = 1,2-bis(diphenylphosphino)ethane; 2a, R = CCH; 2b, R = CCSi(CH₃)₃; 2c, R = CCSi(CH(CH₃)₂)₃; 3a, R = CC2,5-C₄H₂SCCH; 3c, R = CC2,5-C₄H₂SCCSi(CH(CH₃)₂)₃) is described. The ¹³C NMR and FTIR spectroscopic data indicate that the π-back donation from the metal to the carbon rich ligand increases with the size of the organic π-electron systems. The new complexes were also analyzed by CV and the chemical oxidation of 2a and 3c was carried out using 1 equiv of [Cp₂Fe][PF₆]. The corresponding complexes 2a[PF₆] and 3c[PF₆] are thermally stable, but 2a[PF₆] was too reactive to be isolated as a pure compound. The spectroscopic data revealed that the coordination of large organic π-electron systems to the iron nucleus produces only a weak increase of the carbon character of the SOMO for these new organoiron(III) derivatives.     

Solvent and phosphine dependency in the reaction of cis-RuCl2(P-P)2 (P-P = dppm or dppe) with terminal alkynes

Reaction of cis-[RuCl₂(dppm)₂] (dppm = 1,2-bis(diphenylphosphino)methane) with PhCCH and NaPF₆ utilising methanol as solvent results in the formation of the η³-butenynyl complex [Ru(η³-PhCCCCHPh)(dppm)₂][PF₆] in good yield. Similar reactions with Bu^tCCH and PrⁿCCH resulted in the corresponding alkyl-substituted complexes and all three of these compounds have been characterised by NMR spectroscopy and X-ray crystallography. The mechanism of this reaction has been probed by employing labelling experiments with both PhCCD and PhC¹³CH allowing the identity of possible intermediates in the reaction to be determined. Furthermore, [Ru(η³-PhCCCCHPh)(dppm)₂][PF₆] has been shown to be an effective regio- and stereo-selective catalyst for the dimerisation of PhCCH to Z-PhCCCHCHPh in the absence of solvent. In contrast, no evidence for the formation of alkyne coupling was obtained from the reaction of cis-[RuCl₂(dppe)₂] (dppe = 1,2-bis(diphenylphosphino)ethane) with PhCCH and NaPF₆.     

Oxidatively induced reactions of a diimine platinum(IV) tetramethyl complex

The oxidation of the Pt(IV) tetramethyl complex [ArNCHCHNAr]PtMe₄ (Ar = 2,6-Me₂C₆H₃) has been investigated in acetonitrile and dichloromethane. Cyclic voltammetry demonstrates that the irreversible oxidation of [ArNCHCHNAr]PtMe₄ occurs at a slightly less positive oxidation potential than the irreversible oxidation of the analogous Pt(II) species [ArNCHCHNAr]PtMe₂. The product distribution arising from the oxidation depends strongly on the reaction conditions and includes cationic Pt(IV) species (acetonitrile, dichloromethane solvents) and Pt(II) species (dichloromethane only). Evidence is presented that suggests that homolytic cleavage of a weakened PtC bond in is involved in the oxidatively induced reactions.     

Syntheses and molecular structures of some phosphine-gold(I) derivatives of 1,3-diynes

The syntheses of several diynylgold(I) phosphine complexes, including Au(CCCCH){P(tol)₃} (1), Au(CCCCSiMe₃)(PR₃) (R = Ph 2-Ph, tol 2-tol), Au(CCCCFc)(PPh₃) (3), {(tol)₃P}Au(CC)_nAu{P(tol)₃} [n = 2 (4), 3 (6), 4 (7)], {(Ph₃P)Au}CCCC{Au[P(tol)₃]} (5), [ppn][Au{CCCCAu[P(tol)₃]}₂] (8), [Au₂(μ-I)(μ-dppm)₂][Au(CCCCSiMe₃)₂] (9), Hg{CCCCAu(PR₃)}₂ (R = Ph 10-Ph, tol 10-tol) and {(triphos)Cu}CCCC{Au[P(tol)₃]} (11) are described. Of these, the X-ray molecular structures of 1, 2-tol, 3, 4 and 9 have been determined.     

Reactivity of [CpRh(η-C6H3NH2-2,6-i-Pr2)](OTf)2 toward phosphines and alkynes

The cationic aniline complex [Cp^∗Rh(η⁶-2,6-(Me₂CH)₂C₆H₃NH₂)](OTf)₂ (1) was prepared from either [Cp^∗Rh(η²-NO₃)(η¹-OTf)] or [Cp^∗Rh(OH₂)₃](OTf)₂ and 2,6-diisopropylaniline. Complex 1 underwent substitution with phosphines or phosphites, indicating the labile character of the η⁶-aniline ligand. Complex 1 mediated cycloaddition reactions of several alkynes in refluxing ethanol: the [2 + 2] dimerization for PhCCPh and the [2 + 2 + 1] trimerization for PhCCH and CH₃C₆H₄CCH. The unexpected cyclobutadiene complex [Cp^∗Rh(η⁴-C₄(C(O)CH₃)₂H(SiMe₃))] was obtained from complex 1 and Me₃SiCCCCSiMe₃ and structurally characterized by X-ray diffraction.     

Formation of a cyclobutenylidene by cyclo-addition of an alkynyl-ruthenium complex to a cyano(alkynyl)ethene

In contrast to the usual formal [2+2]-cycloaddition reaction, (NC)₂CC{CC(SiPrⁱ₃)}₂, containing bulky alkynyl substituents, reacts with Ru(CCPh)(PPh₃)₂Cp to give the unprecedented cyclobutenylidene complex Ru{C(CN)₂C[CC(SiPrⁱ₃)]CC(SiPrⁱ₃)CPhC}(PPh₃)Cp, formed by addition of one of the CC(SiPrⁱ₃) groups to the Ru-CCPh moiety and subsequent electronic reorganisation.     

Further reactions of some bis(vinylidene)diruthenium complexes

Whereas {Ru(dppm)Cp*}₂(μ-CCCC) (2) is the only product formed by deprotonation of [{Ru(dppm)Cp*}₂{μ(CCHCHC)}]⁺ with dbu, a mixture of 2 with Ru{CCCHCH(PPh₂)₂[RuCp*]}(dppm)Cp* (3) and {Cp*Ru(PPh₂CHCCH-)}₂ (4) is obtained with KOBu^t. A similar reaction with [{Ru(dppm)Cp*}₂{μ(CCMeCMeC)}]⁺ (5) gave Ru{CCCMeCH(PPh₂)₂[RuCp*]}(dppm)Cp* (6). X-ray structures of 4, 5 and 6 confirm the presence of the 1-ruthena-2,4-diphosphabicyclo[1.1.1]pentane moiety, which is likely formed by an intramolecular attack of the deprotonated dppm ligand on C(1) of the vinylidene ligand. Protonation of {Ru(dppe)Cp*}₂(μ-CCCC) (8-Ru) regenerates its precursor [{Ru(dppe)Cp*}₂{μ(CCHCHC)}]²⁺ (7-Ru). Ready oxidation of the bis(vinylidene) complex affords the cationic carbonyl [Ru(CO)(dppe)Cp*]PF₆ (9) (X-ray structure).     

Cross-coupling reactions of gold(I) alkynyl and polyyndiyl complexes

Gold(I) alkynyl complexes are shown to efficiently couple with aryl iodides under mild conditions in the presence of both Pd(II) and Cu(I) co-catalysts. The reaction is not gold catalysed, but rather the Au(I) centre serves to transfer the alkynyl moiety to Cu(I), which then enters the conventional Sonogashira cycles. Using this method, a small range of 1,4-disubstituted diynes, including examples of differentially substituted compounds ArCCCCAr′, have been prepared directly from [(Ph₃P)AuCCCCAu(PPh₃)] and aryl iodides ArI.     

Synthesis, structures and some reactions of Ru(CCCCFc)(PP)Cp (PP = dppm, dppe) and related compounds

The compounds Ru(CCCCFc)(PP)Cp [PP = dppe (1), dppm (2)], have been obtained from reactions between RuCl(PP)Cp and FcCCCCSiMe₃ in the presence of KF (1) or HCCCCFc and K[PF₆] (2), both with added dbu. The dppe complex reacts with Co₂(CO)₆(L₂) [L₂ = (CO)₂, dppm] to give 3, 4 in which the Co₂(CO)₄(L₂) group is attached to the outer CC triple bond. The PPh₃ analogue of 3 (5) has also been characterised. In contrast, tetracyanoethene reacts to give two isomeric complexes 6 and 7, in which the cyano-olefin has added to either CC triple bond. The reaction of RuCl(dppe)Cp with HCCCCFc, carried out in a thf/NEt₃ mixture in the presence of Na[BPh₄], gave [Ru{CCC(NEt₃)CHFc}(dppe)Cp]BPh₄ (8), probably formed by addition of the amine to an (unobserved) intermediate butatrienylidene [Ru(CCCCHFc)(dppe)Cp]⁺. The reaction of I₂ with 8 proceeds via an unusual migration of the alkynyl group to the Cp ring to give [RuI(dppe){η-C₅H₄CCC(NEt₃)CHFc}]I₃ (9). Single-crystal X-ray structural determinations of 1, 2 and 4-9 are reported.     

Synthesis of di-, tri- and tetranuclear platinum(II) and copper(I) acetylide complexes

Heterobimetallic {cis-[Pt](μ-σ,π-CCPh)₂}[Cu(NCMe)]BF₄ (3a: [Pt] = (bipy)Pt, bipy = 2,2′-bipyridine; 3b: [Pt] = (bipy′)Pt, bipy′ = 4,4′-dimethyl-2,2′-bipyridine) is accessible by the reaction of cis-[Pt](CCPh)₂ (1a: [Pt] = (bipy)Pt, 1b: [Pt] = (bipy′)Pt]) with [Cu(NCMe)₄]BF₄ (2). Substitution of NCMe by PPh₃ (4) can be realized by the reaction of 3a with 4, whereby [{cis-[Pt](μ-σ,π-CCPh)₂}Cu(PPh₃)]BF₄ (5) is formed. On prolonged stirring of 3 and 5, respectively, NCMe and PPh₃ are eliminated and tetrametallic {[{cis-[Pt](η²-CCPh)₂}Cu]₂}(BF₄)₂ (6) is produced. Addition of an excess of NCMe to 6 gives heterobimetallic 3a.When instead of NCMe or PPh₃ chelating molecules such as bipy (7) are reacted with 3a then the heterobimetallic π-tweezer molecule [{cis-[Pt](μ-σ,π-CCPh)₂}Cu(bipy)]BF₄ (8) is formed. Treatment of 8 with another equivalent of 7 produced [Cu(bipy₂)]BF₄ (9) along with [Pt](CCPh)₂. However, when 3b is reacted with 1b in a 1:1 molar ratio then 10 and 11 of general composition [{[Pt](CCPh)₂}₂Cu]BF₄ are formed. These species are isomers and only differ in the binding of the PhCC units to copper(I). A possible mechanism for the formation of 10 and 11 is presented.The solid state structures of 6, 10 and 11 are reported. In 11 the [{cis-[Pt](μ-σ,π-CCPh)₂}₂Cu]⁺ building block is set-up by two nearly orthogonal positioned bis(alkynyl) platinum units which are connected by a Cu(I) ion, whereby the four carbon-carbon triple bonds are unsymmetrical coordinated to Cu(I). In trimetallic 10 two cis-[Pt](CCPh)₂ units are bridged by a copper(I) center, however, only one of the two PhCC ligands of individual cis-[Pt](CCPh)₂ fragments is η²-coordinated to Cu(I) giving rise to the formation of a [(η²-CCPh)₂Cu]⁺ moiety with a linear alkyne-copper-alkyne arrangement (alkyne = midpoint of the CC triple bond). In 6 two almost parallel oriented [Pt](CCPh)₂ planes are linked by two copper(I) ions, whereby two individual PhCC units, one associated with each Pt building block, are symmetrically π-coordinated to Cu.     

Further chemistry of ruthenium butatrienylidene complexes

Several complexes have been obtained from reactions carried out in early attempts to prepare the diynyl complexes Ru(CCCCR)(dppe)Cp* (R = H, SiMe₃). These have been identified crystallographically as the acyl complex Ru{CCC(O)Me}(dppe)Cp* (3), the cationic imido complex [Ru{CCC(NH₂)Me}(dppe)Cp*]PF₆ (4), the binuclear butenynylallenylidene [{Ru(dppe)Cp*}₂{μ-CCC(OMe)CHCMeCC}]PF₆ (5), and the bis(ethynyl)cyclobutenylidene [{Ru(dppe)Cp*}₂{μ-CCC₄H₂(SiMe₃)CC}]PF₆ (6). NMR studies of 5 have revealed the existence of two isomers. Plausible routes for their formation from the putative butatrienylidene intermediate [Ru(CCCCH₂)(dppe)Cp*]⁺ (A) are discussed.     

A comparison between the reaction of P2Ph4 with [{Co2(CO)6}2(μ-η:μ-η-HOCH2CCCCCH2OH)] and the reaction of [Co2(μ-PPh2)2(CO)6] with HOCH2CCCCCH2OH

Reaction of P₂Ph₄ with the diyne-diol complex [{Co₂(CO)₆}₂(μ-η²:μ-η²-HOCH₂CCCCCH₂OH)] in toluene at 65 °C gives [{Co₂(μ-P₂Ph₄)(CO)₄}{Co₂(CO)₆}(μ-η²:μ-η²-HOCH₂CCCCCH₂OH)] (1). Thermolysis of 1 at 95 °C leads to [{Co₂(CO)₅}₂(μ-P₂Ph₄)(μ-η²:μ-η²-HOCH₂CCCCCH₂OH)](2) and (μ₂-PPh₂)(μ₂-CO)(CO)₇] (3). The structures of 1-3 have been established by X-ray crystallography. In 1, a pseudoequatorial P₂Ph₄ ligand bridges the cobalt-cobalt bond of a Co₂(CC)(CO)₄ unit. By contrast, in isomeric 2, a pseudoaxial P₂Ph₄ ligand spans two Co₂(CC)(CO)₅ units, a new coordination mode for [{Co₂(CO)₅L}₂(μ-η²:μ-η²-diyne)] complexes. Complex 3 arises from dehydration-cyclocarbonylation of the diyne-diol in 1 to give a 2(5H)-furanone, a process that has not been previously reported. Reaction of HOCH₂CCCCCH₂OH with [Co₂(μ-PPh₂)₂(CO)₆] at 80 °C in toluene gave [Co₃(μ-PPh₂)₃(CO)₆], [Co₂(CO)₆(μ-η²-HOCH₂CCCCCH₂OH)] and [Co₂{μ-η⁴-PPh₂C(CCCH₂OH)C(CH₂OH)CO}(μ-PPh₂)(CO)₄] (4). The regiochemistry of 4 was confirmed by X-ray crystallography.     

Iodo-alkynyl- and iodo-butadiynyl-ruthenium complexes

Addition of [I(py)₂]BF₄ to Ru(CCH)(dppe)Cp∗ gave the iodovinylidene [Ru(CCHI)(dppe)Cp∗]BF₄1, which could be deprotonated to Ru(CCI)(dppe)Cp∗ 2. The attempted preparation of Ru(CCCCI)(dppe)Cp∗, followed by derivatisation with tcne, gave the dienynyl Ru{CCC[C(CN)₂]CIC(CN)₂}(dppe)Cp∗ 3. The Pd(0)/Cu(I)-catalysed reaction of 3 with Ru{CCCCAu(PPh₃)}(dppe)Cp∗ afforded Ru{CCCC(CN)₂CC(CN)₂Au(PPh₃)}(dppe)Cp∗ 4 by formal replacement of I⁺ by [Au(PPh₃)]⁺. XRD structures of 1-4 are reported.     

Some complexes containing carbon chains end-capped with tungsten or ruthenium groups and tricobalt carbonyl clusters

The Pd(0)/Cu(I)-catalysed reactions between Co₃(μ₃-CBr) (CO)₉ and W(CCCCH)(CO)₃Cp gives the C₅ complex {Cp(OC)₃W}CCCCC{Co₃(CO)₉} (2). Similarly, Co₃(μ₃-CBr)(μ-dppm)(CO)₇ and W(CCCCH)(CO)₃Cp or Ru(CCCCH)(dppe)Cp* give {Cp(OC)₃W}CCCCC{Co₃(μ-dppm)(CO)₇} and {Cp*(dppe)Ru}CCCCC{Co₃(μ-dppmn)(CO)₇} (5). An attempt to prepare a C₃ analogue from Ru(CCH)(PPh₃)₂Cp and Co₃(μ₃-CBr)(CO)₉ gave instead the acyl derivative {Cp(Ph₃P)₂Ru}CCC(O)C{Co₃(CO)₈(PPh₃)} (7). The X-ray structures of 2, 5 and 7 are reported: the C₅ chains in 2 and 5 have an essentially unperturbed -CC-CC-C formulation.     

Preparation, structure and some chemistry of FcCCCCCCRu(dppe)Cp

The synthesis of Fc(CC)₃Ru(dppe)Cp (2) from Fc(CC)₃SiMe₃ and RuCl(dppe)Cp is described, together with its reactions with tcne to give the tetracyano-dienyl FcCCCC{C[C(CN)₂]}₂Ru(dppe)Cp (3) and -cyclobutenyl FcCCCC{CCC(CN)₂C(CN)₂}Ru(dppe)Cp (4), with Co₂(μ-dppm)_n(CO)_8−2n (n = 0, 1) to give FcC₂{Co₂(CO)₆}C₂{Co₂(CO)₆}CCRu(dppe)Cp (5) and FcCCCCC₂{Co₂(μ-dppm)(CO)₄}Ru(dppe)Cp (6), respectively, and with Os₃(CO)₁₀(NCMe)₂ to give Os₃{μ₃-C₂CCCC[Ru(dppe)Cp]}(CO)₁₀ (7). On standing in solution, the latter isomerises to the cyclo-metallated derivative Os₃(μ-H){μ₃-C[Ru(dppe)Cp]CCC[(η-C₅H₃)FeCp]}(CO)₈ (8). X-ray structural determinations of 1, 2, 6 and 7 are reported.     

Carbon-carbon and carbon-chlorine bond formation on reaction of iodine(III) reagents with the bis(alkynyl)palladium(II) motif, and structural chemistry of trans-Pd(CC-o-Tol)2(PMe2Ph)2] and trans-[PdCl(CC-o-Tol)(PMe2Ph)2]

Trans-di(ortho-tolylethynyl)bis(dimethylphenylphosphine)palladium(II) reacts above −20 °C with the iodonium reagent IPhCl₂ to give predominantly o-Tol-CC-Cl, above 15 °C with IPh₂(OTf) (OTf = triflate) to give o-Tol-CC-Ph and (o-Tol-CC)₂ in ca. 3:1 ratio, and above 10 °C with IPh(CCR)(OTf) (R = Bu^t, SiMe₃) to give predominantly o-Tol-CC-CC-R and (o-Tol-CC)₂. ³¹P NMR spectra provide evidence for detection of intermediates. The complexes trans-[Pd(CC-o-Tol)₂(PMe₂Ph)₂] and trans-[PdCl(CC-o-Tol)(PMe₂Ph)₂] are obtained on reaction of trans-[PdCl₂(PMe₂Ph)₂] with Li(CC-o-Tol) and o-Tol-CCH/Et₃N, respectively, and have been characterised by X-ray crystallography.