Vinyliden-Übergangsmetallkomplexe XXVI. Synthese und struktur kationischer Carbonyl-, Alken-, Vinyliden-, Alkinyl- und Alkin-Rhodiumkomplexe mit der Baueinheit trans-[Rh(PPr3)2]

The complex trans-[Rh(CO)(NH₃)(PiPr₃)₂]PF₆ (2) was prepared from [(η³-C₃H₅)Rh(PⁱPr₃)₂] (1), NH₄PF₆ and CO or from 1 and NH₄PF₆ in presence of an excess of methanol. With an excess of CO, the dicarbonyl and tricarbonyl compounds trans-[Rh(CO)₂(PⁱPr₃)₂]PF₆ (3) and [Rh(CO)₃(PⁱPr₃)₂]PF₆ (4) were obtained. Displacement of one CO ligand in 3 by pyridine and acetone led to the formation of trans-[Rh(CO)(py)PⁱPr₃)₂]PF₆ (5a) and trans-[Rh(CO) (O=CMe₂(PⁱPr₃)₂]PF₆ (6), respectively. Treatment of 1 with [pyH]BF₄ and pyridine gave trans-[Rh(py)₂(PⁱPr₃)₂]BF₄ (7); in presence of H₂ the dihydrido complex [RhH₂(py)₂(PⁱPr₃)₂]BF₄ (8) was formed. The reaction of 1 with NH₄PF₆ and ethylene produced trans [Rh(C₂H₄(NH₃(PⁱPr₃)₂]PF₆(9) whereas with methylvinylketone and acetophenone the octahedral hydridorhodium(III) complexes [RhH(η²-CH=CHC(=O)CH₃ (NH₃(PⁱPr₃)₂]PF₆(11) and [RhH(η2-C₆H₄C(=O)CH₃(NH₃(Pⁱpr₃)₂]PF₆ (13) were obtained. The synthesis of the cationic vinylidenerhodium(I) compounds trans-[Rh(=C=CHR)(py)(PⁱPr₃)₂]BF₄ (14–16) and trans-[Rh(=C=CHR)(NH₃)(PⁱPr₃) ₂]PF6 (17–19) was achieved either on treatment of 1 with [pyH]BF₄ or NH₄PF₆ in presence of 1-alkynes or by ethylene displacement from 9 by HCCR. With tert-butylacetylene as substrate, the alkinyl(hydrido)rhodium(III) complex [RhH(CC^tBu)(NH₃)(O=CMe₂)(PⁱPr₃) ₂]PF₆ (20) was isolated which in CH₂Cl₂ solution smoothly reacted to give 19 (R =^tBu). The cationic but-2-yne compound trans-[Rh(MeCCMe)(NH₃)(Pⁱ Pr₃)₂]PF₆ (21) was prepared from 1, NH₄PF₆ and C₂Me₂. The molecular structures of 3 and 14 were determined by X-ray crystallography; in both cases the square-planar coordination around the metal and the trans disposition of the phosphine ligands was confirmed.

Abstract

Der Komplex trans-[Rh(CO)(NH₃)(PⁱPr₃)₂]PF₆ (2) wurde aus [(η³-C₃H₅)Rh(PⁱPr₃)₂] (1), NH₄PF₆ und CO oder aus 1, NH₄PF₆ und Methanol hergestellt. In Gegenwart von überschüssigem CO wurden die Dicarbonyl- und Tricarbonyl-Verbindungen trans-[Rh(CO)₂(PⁱPr₃)₂]PF₆ (3) und [Rh(CO)₃(PⁱPr₃)₂]PF₆ (4) erhalten. Die Verdrängung eines CO-Liganden in 3 durch Pyridin oder Aceton führte zur Bildung von trans-[Rh(CO)(py)(PⁱPr₃)₂]PF₆ (5a) bzw. trans-[Rh(CO)(O=CMe₂)(PⁱPr₃)₂]PF₆ (6). Bei Einwirkung von [pyH]BF₄ und Pyridin auf 1 entstand trans-[Rh(py)₂(PⁱPr₃)₂]BF₄ (7); in Gegenwart von H₂ bildete sich der Dihydrido-Komplex [RhH₂(py)₂(PⁱPr₃) ₂]BF₄ (8). Die Reaktion von 1 mit NH₄PF₆ und Ethen lieferte trans-[Rh(C₂H₄)(NH₃)(PⁱPr₃)₂] PF₆ (9) während mit Methylvinylketon und Acetophenon die oktaedrischen Hydridorhodium(III)-Komplexe [RhH(η²-CH=CHC(=O)CH₃ (NH₃)-(PⁱPr₃)₂]PF₆ (11) und [RhH(η-²-C₆H₄C(=O)CH₃(NH₃)(PⁱPr₃)₂)₂]PF₆ (13) erhalten wurden. Die Synthese der kationischen Vinyli-denrhodium(I)-Verbindungen trans-[Rh(=C=CHR(py)(PⁱPr₃)₂]BF₄ (14–16) und trans-[Rh(=C=CHR)(NH₃)(PⁱPr₃)₂]PF₆ (17–19) gelang durch Einwirkung von [pyH]BF₄ bzw. NH₄PF₆ auf 1 in Gegenwart von 1-Alkinen oder durch Ethen-Verdrängung aus 9 mit HCCR. Mit tert-Butylacetylen als Reaktionspartner wurde der Alkinyl(hydrido)rhodium(III)-Komplex [RhH(CC^tBu)(NH₃(O=CMe₂)(PⁱPr₃)₂]PF₆ (20) isoliert, der in CH₂Cl₂-Lösung sofort zu 19 (R =^tBu) reagiert. Die kationische 2-Butin-Verbindung trans -[Rh(MeCCMe)(NH₃)PⁱPr₃)₂]PF₆ (21) wurde aus 1, NH₄PF₆ und C₂Me₂ hergestellt. Die Strukturen von 3 und 14 wurden kristallographisch bestimmt; in beiden Fa len ließ sich die quadratisch-planare Koordination des Metalls und die trans-Anordnung der Phosphanliganden bestätigen.     

Cycloadditionsreaktionen von Organometall-Komplexen : XV. [2 + 31- und [2 + 1]-Cycloadditionsreaktionen von Carbonylrhodium- und Carbonylcobalt-Komplexen mit Nitriloxiden und Aziden. Die Kristall- und Molekülstruktur von C5H5(PPr3) (C6H5)

The reaction of C₅H₅Rh(CO)(PⁱPr₃) (1] which is prepared from C₅H₅Rh(CO)₂ and neat P¹Pr₃, with the nitriloxides 2-RC₆H₄CNO (R = H, Cl) leads to the formation of the metallaheterocycles C₅H₅(P¹Pr₃) ) (2, 3) in 90–95% yield. Compound 1 reacts with tosylazide to give the C,N-bound isocyanate complex C₅ H₅(PⁱPr₃)Rh(η²-TosN=C=O) (6). Analogously, on treatment of C₅Me₅Co(CO)(PMe₃) with phenylazide the phenylisocyanate derivative C₅Me₅(PMe₃)Co(η²-PhN=C=O) (7) is formed. Protonation of 7 with CF₃CO ₂H affords the non-ionic carbamoylcobalt complex C₅Me₅(PMe₃)Co[C(O)NHPh](O₂CCF₃) (8). The X-ray structural analysis of 2 reveals the presence of an almost planar heterocycle in which the two Rh-C distances differ by 0.045 Å     

Electrochemical behaviour of [Ru(L)(CO)2Cl2] [Ru(L)(CO)Cl3][Me4N] and [Ru(L)(CO)2(CH3CN)2][CF3SO3]2 complexes (L = 2,2′- bipyridine or 4,4′-isopropoxycarbonyl-2,2′-bipyridine)

The clectrochemical behaviour of the complexes [Ru^II(L)(CO)₂Cl₂], [Ru^II(L)(CO)Cl₃][Me₄N] and [Ru^II(L)(CO)₂(CH₃CN)₂][CF₃SO₃]₂ (L = 2,2′-bipyridine or 4,4′-isopropoxycarbonyl-2,2′-bipyridine) has been investigated in CH₃CN. The oxidation of [Ru(L)(CO)₂Cl₂] produces new complexes [Ru^III(L)(CO)(CH₃CN)₂Cl]²⁺ as a consequence of the instability of the electrogenerated transient Ru^III species [Ru^III(L)(CO)₂Cl₂]⁺. In contrast, the oxidation of [Ru^II(L)(CO)Cl₃][Me₄N] produces the stable [Ru^III(L)(CO)Cl₃] complex. In contrast [Ru^II(L)(CO)₂(CH₃CN)₂][CF₃SO₃]₂ is not oxidized in the range up to the most positive potentials achievable. The reduction of [Ru^II(L)(CO)₂Cl₂] and [Ru^II(L)(CO)₂(CH₃CN)₂][CF₃SO₃]₂ results in the formation of identical dark blue strongly adherent electroactive films. These films exhibit the characteristics of a metal-metal bond dimer structure. No films are obtained on reduction of [Ru^II(L)(CO)Cl₃][Me₄N]. The effect of the substitution of the bipyridine ligand by electron-withdrawing carboxy ester groups on the electrochemical behaviour of all these complexes has also been investigated.     

Cl/Cl isotope effects in Rh NMR of [RhCln(H2O)6−n] complex anions in hydrochloric acid solution as a unique ‘NMR finger-print’ for unambiguous speciation

A detailed analysis of the ³⁵Cl/³⁷Cl isotope effects observed in the 19.11 MHz ¹⁰³Rh NMR resonances of [RhCl_n(H₂O)_6−n]³⁻ⁿ complexes (n = 3–6) in acidic solution at 292.1 K, shows that the ‘fine structure’ of each ¹⁰³Rh resonance can be understood in terms of the unique isotopologue and in certain instances the isotopomer distribution in each complex. These ³⁵Cl/³⁷Cl isotope effects in the ¹⁰³Rh NMR resonance of the [Rh^35/37Cl₆]³⁻ species manifest only as a result of the statistically expected ³⁵Cl/³⁷Cl isotopologues, whereas for the aquated species such as for example [Rh^35/37Cl₅(H₂O)]²⁻, cis-[Rh^35/37Cl₄(H₂O)₂]⁻ as well as the mer-[Rh^35/37Cl₃(H₂O)₃] complexes, additional fine-structure due to the various possible isotopomers within each class of isotopologues, is visible. Of interest is the possibility of the direct identification of stereoisomers cis-[RhCl₄(H₂O)₂]⁻, trans-[RhCl₄(H₂O)₂]⁻, fac-[RhCl₃(H₂O)₃] and mer-[RhCl₃(H₂O)₃] based on the ¹⁰³Rh NMR line shape, other than on the basis of their very similar δ(¹⁰³Rh) chemical shift. The ¹⁰³Rh NMR resonance structure thus serves as a novel and unique ‘NMR-fingerprint’ leading to the unambiguous assignment of [RhCl_n(H₂O)_6−n]³⁻ⁿ complexes (n = 3–6), without reliance on accurate δ(¹⁰³Rh) chemical shifts.     

Coordination chemistry of the [Pt2(μ-S)2(PPh3)4] metalloligand with π-hydrocarbon derivatives of d ruthenium(II), osmium(II), rhodium(III) and iridium(III)

The reactivity of [Pt₂(μ-S)₂(PPh₃)₄] towards [RuCl₂(η⁶-arene)]₂ (arene=C₆H₆, C₆Me₆, p-MeC₆H₄Prⁱ=p-cymene), [OsCl₂(η⁶-p-cymene)]₂ and [MCl₂(η⁵-C₅Me₅)]₂ (M=Rh, Ir) have been probed using electrospray ionisation mass spectrometry. In all cases, dicationic products of the type [Pt₂(μ-S)₂(PPh₃)₄ML]²⁺ (L=π-hydrocarbon ligand) are observed, and a number of complexes have been prepared on the synthetic scale, isolated as their BPh₄⁻ or PF₆⁻ salts, and fully characterised. A single-crystal X-ray structure determination on the Ru p-cymene derivative confirms the presence of a pseudo-five-coordinate Ru centre. This resists addition of small donor ligands such as CO and pyridine. The reaction of [Pt₂(μ-S)₂(PPh₃)₄] with RuClCp(PPh₃)₂ (Cp=η⁵-C₅H₅) gives [Pt₂(μ-S)₂(PPh₃)₄RuCp]⁺. In addition, the reaction of [Pt₂(μ-S)₂(PPh₃)₄] with the related carbonyl complex [RuCl₂(CO)₃]₂, monitored by electrospray mass spectrometry, gives [Pt₂(μ-S)₂(PPh₃)₄Ru(CO)₃Cl]⁺.     

High-yield syntheses of [Rh7(CO)16] and [Rh14(CO)25] working in ethylene glycol solution under 1 atm of CO

The anionic rhodium carbonyl clusters [Rh₇(CO)₁₆]³⁻ and [Rh₁₄(CO)₂₅]⁴⁻ can be easily prepared by a new simple and high yield one-pot synthesis starting from RhCl₃·nH₂O dissolved in ethylene glycol and involving two steps: (i) treatment of RhCl₃·nH₂O under 1 atm of CO at 50 °C to give [Rh(CO)₂Cl₂]⁻; (ii) addition of a base (CH₃CO₂Na or Na₂CO₃) followed by reductive carbonylation under 1 atm of CO at an adequate temperature (50 °C for [Rh₇(CO)₁₆]³⁻; 150 °C for [Rh₁₄(CO)₂₅]⁴⁻). These new syntheses are more convenient than those previously reported, especially since such clusters are not accessible via silica surface-mediated reactions. This different behavior is due to the particular stabilization on the silica surface and under 1 atm of CO of an anionic carbonyl cluster, called A, which does not allow the formation of a higher nuclearity carbonyl cluster, called B, which was shown to be the key-intermediate in the synthesis of [Rh₁₄(CO)₂₅]⁴⁻ working in ethylene glycol solution. Although it was not possible to isolate crystals of A and B suitable for X-ray structural determination, a combination of cyclovoltammetry, one of the few examples so far available of the use of this technique for anionic rhodium carbonyl clusters, infrared spectroscopy and elemental analyses suggest that A and B are probably the never reported [Rh₇(CO)₁₄]⁻ and [Rh₁₅(CO)₂₈]³⁻ clusters, respectively. In particular the tentative formulation of the two clusters was carried out by a non-conventional method based on the existence of a linear correlation between carbonyl frequencies of the main band and the [(charge/Rh atoms)/CO number] ratio.     

First examples of [Rh(Bident)(CO)(L)] complexes where L is N-donor ligand: Molecular structure of [Rh(8-Oxiquinolinato)(CO)(NH3)]

Selective oxidation of one (trans to N) carbonyl group in [Rh(8-Oxiquinolinato)(CO)₂] with stoichiometric amount of Me₃NO in MeCN produces a solution containing [Rh(Oxq)(CO)(Me₃N)] and [Rh(Oxq)(CO)(MeCN)]. The ammonia complex, [Rh(Oxq)(CO)(NH₃)], has been prepared by action of NH₃ gas on this solution and characterized by IR, ¹H and ¹³C NMR, and X-ray data. Spectral parameters, ν(CO), δ¹³C, and ¹J(CRh), were measured in situ for a series of complexes [Rh(Oxq)(CO)(L)] (L = NAlk₃, Py, PBu₃, PPh₃, P(OPh)₃, C₈H₁₄) formed upon action of L on [Rh(Oxq)(CO)(NH₃)] in THF. A new ν(CO) and δ¹³C based scale of σ-donor/π-acceptor properties of ligands L is proposed including NH₃ and CO as the natural endpoints.     

Complexes of neodymium and dysprosium triiodides with amines. Molecular structures of the {Dy[Me2N(CH2)3NH2]8}I3, NdI3(PriNH2)4, and NdI3(PriNH2)5 complexes

The dissolution of DyI₂ in diamine Me₂N(CH₂)₃NH₂ (DMDA) is accompanied by the disproportionation of the salt, hydrogen evolution, and oxidation of Dy^II to Dy^III. The [Dy(DMDA)₈]I₃ complex (1) was isolated from the solution. The neodymium amide amine complex (PrⁱNH)NdI₂(IPA)₄ was produced by the reaction of NdI₂ with isopropylamine (IPA). The recrystallization of this complex from IPA afforded the NdI₃(IPA)₄ complex (2). The recrystallization of (PrⁱNH)NdI₂(IPA)₄ from a toluene-IPA mixture gave the complex with five amine ligands, NdI₃(IPA)₅ (3). The structures of compounds 1, 2, and 3 were established by X-ray diffraction. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1674–1679, September, 2007.     

Remarks on the process of homogeneous carbonylation of rhodium compounds by N,N-dimethylformamide

Reductive carbonylation of rhodium(III) chloride complexes, commercial RhCl₃ · nH₂O neutralized with BaCO₃, (Me₂NH₂)₂[RhCl₅(DMF)], (PPh₄)[RhCl₄(H₂O)₂], RhCl₃(DMF)₃, RhCl₃(CH₃CN)₃, RhCl₃(CH₃CN)₂(DMF), [Rh(CO)₂Cl₃]₂, and rhodium(I) complex, Rh(PPh₃)₃Cl, by N,N-dimethylformamide (DMF) is studied. The data obtained support the conception of direct carbonyl group transfer from DMF molecule to the Rh metal center. The mechanistic scheme of carbonylation process is refined and discussed with regard of new experimental results.     

Synthesis and characterisation of some salts of the ions [Rh(Oxalato)2(Rpy)2]−

Salts of three bisoxalato bis(pyridine) species, trans-[Rh(ox)₂(py)₂]^?, trans-[Rh(ox)₂(3-Mepy)₂]^? and trans-[Rh(ox)₂(4-Mepy)₂]^? have been isolated from the substitution of N-heterocycles into trisoxalatorhodate(III) and characterised on the basis of ¹H NMR and ¹³C NMR spectra, which are similar to that of the trans-[Co(oxalato)₂ (R-py)₂]^? complex.     

Rhodium(I) complexes with bis(pyrazolyl)methane ligands. Crystal structure of [Rh(COD)(CH2(Pz)2)]ClO4·12 C2H4Cl2

The synthesis and properties of neutral and cationic complexes of general formulae [{RhCl(diolefin)}₂(CH₂(pz)₂)], [Rh(CO)₂ (CH₂(pz)₂)][RhCl₂(CO)₂], (Rh(diolefin)(CH₂(pz)₂)]ClO₂, [{Rh(diolefin)(PPh₃)}₂(CH₂(pz)₂)](ClO₄)₂, [Rh(CO)₂(CH₂(pz)₂)]ClO₄ and [Rh(CO)(CH₂(pz)₂)(PPh₃)]ClO₄ are described. The NMR spectra of [Rh(COD)(CH₂(pz)₂)]ClO₄ complexes are discussed. X-ray structural analysis of [Rh(COD)(CH₂(Pz)₂)]ClO₄ · $\text{1}\text{2}$C₂H₄Cl₂ is presented; the final R factor is 0.061 for 2436 observed data, recorded with Cu-K_α, not corrected for absorption and with the sample inside a capillary. The Rh atom presents a distorted square planar coordination in a mononuclear arrangement. The COD ring has a twisted boat conformation, and the two halves of the CH₂(Pz)₂ moiety, which are quite similar to one another, form an angle of 47.2(4)°.     

Dreikern- sowie homo- und heterometall-zweikernkomplexe mit der baueinheit C5Me5Rh. Die kristallstruktur von C5Me5[P(OMe)3[Rh(μ-CO)2RhC5Me5

C₅Me₅Rh(L)P₂Me₄ (L = CO, C₂H₄) reacts with [C₅Me₅Rh(μ-CO)]₂, to give the trinuclear complexes C₅Me₅(L)Rh(μ-P₂Me₄)RhC₅Me₅(μ-CO)₂RhC₅Me₅ (VI, VII). In the reactions of C₅Me₅Rh(CO)P₂Me₄ with C₅H₅(CO)₂ (M = Rh, Co) and C₅H₄RMn(CO)₃ (R = H, Me), the homo- and hetero-metallic binuclear compounds C₅Me₅(CO)Rh(μ-P₂Me₄)M(CO)C₅H₅ (VIII, IX) and C₅Me₅(CO)Rh(μ-P₂Me₄)Mn(CO)₂C₅H₄R (X, XI) are obtained in almost quantitative yield. The X-ray structure of the complex C₅Me₅[P(OMe)₃]Rh(μ-CO)₂RhC₅Me₅ (III), which is structurally related to VI and VII, has been determined. The molecule contains an unsymmetrical, non-planar Rh₂C₂-skeleton with different Rh-C(O) bond lengths. The Rh-Rh distance is 268.5(1) pm; the planes of the two five-membered rings form an angle of 62.6°.     

Some observations on the systems Co2(CO)8/sodium amalgam and Hg[Co(CO)4]2/sodium amalgam,and the effect of added LiBr

Co₂(CO)₈ and Hg[Co(CO)₄]₂ react sodium amalgam and/or mercury in ethereal solvents to give a variety of products. On treatment with aqueous M(o-phen)₃Cl₂(M  Fe, Ni), the anions [Co(CO)₄^?, [Co₃(CO)₁₀]^?, {Hg[Co(CO)₄]₃}^? and {Hg[Co(CO)₄]₂Cl}^? could be isolated as their [M(o-phen)₃]²⁺ salts. The effect of LiBr on the reacting systems was also investigated and the anion {Hg[Co(CO)₄]₂Br}^? isolated.     

Separation and quantification of [RhCln(H2O)6−n] (n = 0-6) complexes, including stereoisomers, by means of ion-pair HPLC-ICP-MS

A hyphenated ion-pair (tetrabutylammonium chloride—TBACl) reversed phase (C₁₈) HPLC-ICP-MS method (High Performance Liquid Chromatography Inductively Coupled Plasma Mass Spectroscopy) for anionic Rh(III) aqua chlorido-complexes present in an HCl matrix has been developed. Under optimum chromatographic conditions it was possible to separate and quantify cationic Rh(III) complexes (eluted as a single band), [RhCl₃(H₂O)₃], cis-[RhCl₄(H₂O)₂]⁻, trans-[RhCl₄(H₂O)₂]⁻ and [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 5, 6) species. The [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 5, 6) complex anions eluted as a single band due to the relatively fast aquation of [RhCl₆]³⁻ in a 0.1 mol L⁻¹ TBACl ionic strength mobile phase matrix. Moreover, the calculated t_1/2 of 1.3 min for [RhCl₆]³⁻ aquation at 0.1 mol kg⁻¹ HCl ionic strength is significantly lower than the reported t_1/2 of 6.3 min at 4.0 mol kg⁻¹ HClO₄ ionic strength. Ionic strength or the activity of water in this context is a key parameter that determines whether [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 5, 6) species can be chromatographically separated. In addition, aquation/anation rate constants were determined for [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 3-6) complexes at low ionic strength (0.1 mol kg⁻¹ HCl) by means of spectrophotometry and independently with the developed ion-pair HPLC-ICP-MS technique for species assignment validation. The Rh(III) samples that was equilibrated in differing HCl concentrations for 2.8 years at 298 K was analyzed with the ion-pair HPLC method. This analysis yielded a partial Rh(III) aqua chlorido-complex species distribution diagram as a function of HCl concentration. For the first time the distribution of the cis- and trans-[RhCl₄(H₂O)₂]⁻ stereoisomers have been obtained. Furthermore, it was found that relatively large amounts of ‘highly’ aquated [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 0-4) species persist in up to 2.8 mol L⁻¹ HCl and in 1.0 mol L⁻¹ HCl the abundance of the [RhCl₅(H₂O)]²⁻ species is only 8-10% of the total, far from the 70-80% as previously proposed. A 95% abundance of the [RhCl₆]³⁻ complex anion occurs only when the HCl concentration is above 6 mol L⁻¹. The detection limit for a Rh(III) species eluted from the column is below 0.147 mg L⁻¹.     

Stabilisation of [Fe2(CO)9] and [Ru2(CO)9] bu substitution with bridging diphosphorus ligands

Reaction of [Fe₂(CO)₉] with a half molar amount of R₂PYPR₂ (Y = CH₂, R = Ph, Me, OMe or OPrⁱ; Y = N(Et), R = OPh, OMe or OCH₂; Y = N(Me), R = OPrⁱ or OEt) leads to the ready formation of a product which on irradiation with ultraviolet light rapidly decarbonylates to the heptacarbonyl derivative [Fe₂(μ-CO)(CO)₆{μ-R₂PYPR₂}]. Treatment of the latter with a slight excess of the appropriate ligand results, under photochemical conditions, in the formation of the dinuclear pentacarbonyl complex [Fe₂(μ-CO)(C))₄{μ-R₂PYPR₂}₂] but under thermal conditions in the formation of the mononuclear species [Fe(CO)₃{R₂PYPR₂}]. Reaction of [Ru₃(CO)₁₂] with an equimolar amount of (RO)₂PN(R′)P(OR)₂ (R′ = Me, R = Prⁱ or Et; R′ = Et, R = Ph or Me) under either thermal or photochemical conditions produces [Ru₃(CO)₁₀{μ-(RO)₂PN(OR)₂}] which reacts further with excess (RO)₂PN(R′)P(OR)₂ on irradiation with ultraviolet light to afford the dinuclear compound [Ru₂(μ-CO)(CO₄{μ-(RO)₂PN(R′)P(OR)₂}₂]. The molecular structure of [Ru₂(μ-CO)(CO)₄{μ-(MeO)₂PN(Et)P(OMe)₂}₂], which has been determined by X-ray crystallography, is described.     

Crystal structures of [Rh(η-C5H5)(C3S5)] and [Rh(η-C5Me5)(C3S5)]2 and properties of their oxidized species

[Rh(η⁵-C₅H₅)(C₃S₅)] and [Rh(η⁵-C₅Me₅)(C₃S₅)]₂ [C₃S₅²⁻=4,5-disulfanyl-1,3-dithiole-2-thionate(2-)] were prepared by reactions of [NMe₄]₂[C₃S₅] with [Rh(η⁵-C₅H₅)Cl₂]₂ and [Rh(η⁵-C₅Me₅)Cl₂]₂, respectively. Their X-ray crystal structural analyses revealed a monomeric form for the former complex and a dimeric geometry containing bridging S-Rh-S bonds for the latter in the solid state. They were reacted with bromine to afford [RhBr(L)(C₃S₅)] (L=η⁵-C₅H₅ and η⁵-C₅Me₅) with the Rh-Br bond and one electron-oxidation on the C₃S₅ ligand. ESR spectra and spin densities for these oxidized species are discussed.     

A synthetic route to heteronuclear clusters containing iridium and rhodium: X-ray crystal structures of [IrOs3(μ-H)2(μ-Cl)(CO)12] and [Ir2Rh2(μ-CO)(μ3-CO)2(CO)4(η-C5Me5)2]

The iridium and rhodium complexes [MCl(CO)₂(NH₂C₆H₄Me-4)] (M = Ir or Rh) react with [Os₃(μ-H)₂(CO)₁₀] to give the tetranuclear clusters [MOs₃(μ-H)₂(μ-Cl)(CO)₁₂]; the iridium compound being structurally identified by X-ray diffraction. Similarly, [IrCl(CO)₂(NH₂C₆H₄Me-4)] and [Rh₂(μ-CO)₂(η-C₅Me₅)₂] afford the tetranuclear cluster [Ir₂Rh₂(μ-CO)(μ₃-CO)₂(CO)₄(η-C₅Me₅)₂], also characterised by single-crystal X-ray crystallog     

New Bimetallic Ni–Rh Carbonyl Clusters: Synthesis and X-ray Structure of the [Ni7Rh3(CO)18]3?, [Ni3Rh3(CO)13]3? and [NiRh8(CO)19]2? Cluster Anions

The reaction of the [Ni₆(CO)₁₂]²⁻ dianion with [Rh(COD)Cl]₂ (COD = cyclooctadiene) in acetone affords a mixture of bimetallic Ni–Rh clusters, mainly consisting of the new [Ni₇Rh₃(CO)₁₈]³⁻ and [Ni₈Rh(CO)₁₈]³⁻ trianions. A study of the reactivity of [Ni₇Rh₃(CO)₁₈]³⁻ led to isolation of the new [Ni₃Rh₃(CO)₁₃]³⁻ and [NiRh₈(CO)₁₉]²⁻ anions. All these new bimetallic Ni–Rh carbonyl clusters have been isolated in the solid state as tetrasubstituted ammonium salts and have been characterised by elemental analysis, X-ray diffraction studies, ESI-MS and electrochemistry. The unit cell of the [NEt₄]₃[Ni₇Rh₃(CO)₁₈] salt contains two orientationally-disordered ν₂-tetrahedral [Ni₇Rh₃(CO)₁₈]³⁻ trianions with occupancy factors of 0.75 and 0.25. Besides, their inner Ni₃Rh₃ octahedral moieties show two cis sites purely occupied by Rh atoms, two trans sites purely occupied by Ni atoms and the remaining two cis sites are disordered Ni and Rh sites with respective occupancy fraction of 0.5. At difference from the parent [Ni₇Rh₃(CO)₁₈]³⁻, the octahedral [Ni₃Rh₃(CO)₁₃]³⁻ displays an ordered distribution of Ni and Rh atoms in two staggered triangles. The [NiRh₈(CO)₁₉]²⁻ dianion adopts an isomeric metal frame with respect to that of the [PtRh₈(CO)₁₉]²⁻ congener. As a fallout of this work, new high-yield synthesis of the known [Ni₆Rh₃(CO)₁₇]³⁻ and [Ni₆Rh₅(CO)₂₁]³⁻, as well as other currently-investigated bimetallic Ni–Rh clusters have been obtained.     

Synthese und dynamisches Verhalten von [Rh2(μ-H)3H2(PiPr3)4]+. Beiträge zur Reaktivität des Tetrahydridodirhodium-Komplexes [Rh2H4(PiPr3)4]

Synthesis and Dynamic Behaviour of [Rh₂(μ-H)₃H₂(PiPr₃)₄]⁺. Contributions to the Reactivity of the Tetrahydridodirhodium Complex [Rh₂H₄(PiPr₃)₄] An improved synthesis of [Rh₂H₄(PiPr₃)₄] ( 2 ) from [Rh(η³-C₃H₅)(PiPr₃)₂] ( 1 ) or [Rh(η³-CH₂C₆H₅)(PiPr₃)₂] ( 3 ) and H₂ is described. Compound 2 reacts with CO or CH₃OH to give trans-[RhH(CO)(PiPr₃)₂] ( 4 ) and with ethene/acetone to yield a mixture of 4 and trans-[RhCH₃(CO)(PiPr₃)₂] ( 5 ). The carbonyl(methyl) complex 5 has also been prepared from trans-[RhCl(CO)(PiPr₃)₂] ( 6 ) and CH₃MgI. Whereas the reaction of 2 with two parts of CF₃CO₂H leads to [RhH₂(η²-O₂CCF₃) · (PiPr₃)₂] ( 8 ), treatment of 2 with one equivalent of CF₃CO₂H in presence of NH₄PF₆ gives the dinuclear compound [Rh₂H₅(PiPr₃)₄]PF₆ ( 9a ). The reactions of 2 with HBF₄ and [NO]BF₄ afford the complexes [Rh₂H₅(PiPr₃)₄]BF₄ ( 9b ) and trans-[RhF(NO)(PiPr₃)₂]BF₄ ( 11 ), respectively. In solution, the cation [Rh₂(μ-H)₃H₂(PiPr₃)₄]⁺ of the compounds 9a and 9b undergoes an intramolecular rearrangement in which the bridging hydrido and the phosphane ligands are involved.     

Synthesis and structural characterisation of rhodium hydride complexes bearing N-heterocyclic carbene ligands

Addition of excesses of N-heterocyclic carbenes (NHCs) IEt₂Me₂, IⁱPr₂Me₂ or ICy (IEt₂Me₂ = 1,3-diethyl-4,5-dimethylimidazol-2-ylidene; IⁱPr₂Me₂ = 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene; ICy = 1,3-dicyclohexylimidazol-2-ylidene) to [HRh(PPh₃)₄] (1) affords an isomeric mixture of [HRh(NHC)(PPh₃)₂] (NHC = IEt₂Me₂ (cis-/trans-2), IⁱPr₂Me₂ (cis-/trans-3), ICy (cis-/trans-4) and [HRh(NHC)₂(PPh₃)] (IEt₂Me₂(cis-/trans-5), IⁱPr₂Me₂ (cis-/trans-6), ICy (cis-/trans-7)). Thermolysis of 1 with the aryl substituted NHC, 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene (IMesH₂), affords the bridging hydrido phosphido dimer, [{(PPh₃)₂Rh}₂(μ-H)(μ-PPh₂)] (8), which is also the reaction product formed in the absence of carbene. When the rhodium precursor was changed from 1 to [HRh(CO)(PPh₃)₃] (9) and treated with either IMes (=1,3-dimesitylimidazol-2-ylidene) or ICy, the bis-NHC complexes trans-[HRh(CO)(IMes)₂] (10) and trans-[HRh(CO)(ICy)₂] (11) were formed. In contrast, the reaction of 9 with IⁱPr₂Me₂ gave [HRh(CO)(IⁱPr₂Me₂)₂] (cis-/trans-12) and the unusual unsymmetrical dimer, [(PPh₃)₂Rh(μ-CO)₂Rh(IⁱPr₂Me₂)₂] (13). The complexes trans-3, 8, 10 and 13 have been structurally characterised.