Advanced Bifunctional Oxygen Reduction and Evolution Electrocatalyst Derived from Surface‐Mounted Metal–Organic Frameworks

Metal–organic frameworks (MOFs) and their derivatives are considered as promising catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), which are important for many energy provision technologies, such as electrolyzers, fuel cells and some types of advanced batteries. In this work, a “strain modulation” approach has been applied through the use of surface‐mounted NiFe‐MOFs in order to design an advanced bifunctional ORR/OER electrocatalyst. The material exhibits an excellent OER activity in alkaline media, reaching an industrially relevant current density of 200 mA cm^?2 at an overpotential of only ≈210 mV. It demonstrates operational long‐term stability even at a high current density of 500 mA cm^?2 and exhibits the so far narrowest “overpotential window” ΔE_ORR‐OER of 0.69 V in 0.1 m KOH with a mass loading being two orders of magnitude lower than that of benchmark electrocatalysts.     

Antiperovskite Intermetallic Nanoparticles for Enhanced Oxygen Reduction

Antiperovskite Co₃InC_0.7N_0.3 nanomaterials with highly enhanced oxygen reduction reaction (ORR) performance were prepared by tuning nitrogen contents through a metal–organic framework (MOF)‐derived strategy. The nanomaterial surpasses all reported noble‐metal‐free antiperovskites and even most perovskites in terms of onset potential (0.957 V at J=0.1 mA cm^?2) and half‐wave potential (0.854 V). The OER and zinc–air battery performance demonstrate its multifunctional oxygen catalytic activities. DFT calculation was performed and for the first time, a 4 e^? dissociative ORR pathway on (200) facets of antiperovskite was revealed. Free energy studies showed that nitrogen substitution could strengthen the OH desorption as well as hydrogenation that accounts for the enhanced ORR performance. This work expands the scope for material design via tailoring the nitrogen contents for optimal reaction free energy and hence performance of the antiperovskite system.     

Cobalt‐Doped Perovskite‐Type Oxide LaMnO3 as Bifunctional Oxygen Catalysts for Hybrid Lithium–Oxygen Batteries

Perovskite‐type oxides based on rare‐earth metals containing lanthanum manganate are promising catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in alkaline electrolyte. Perovskite‐type LaMnO₃ shows excellent ORR performance, but poor OER activity. To improve the OER performance of LaMnO₃, the element cobalt is doped into perovskite‐type LaMnO₃ through a sol–gel method followed by a calcination process. To assess electrocatalytic activities for the ORR and OER, a series of LaMn_1?xCo_xO₃ (x=0, 0.05, 0.1, 0.2, 0.3, 0.4, and 0.5) perovskite oxides were synthesized. The results indicate that the amount of doped cobalt has a significant effect on the catalytic performance of LaMn_1?xCo_xO₃. If x=0.3, LaMn_0.7Co_0.3O₃ not only shows a tolerable electrocatalytic activity for the ORR, but also exhibits a great improvement (>200 mV) on the catalytic activity for the OER; this indicates that the doping of cobalt is an effective approach to improve the OER performance of LaMnO₃. Furthermore, the results demonstrate that LaMn_0.7Co_0.3O₃ is a promising cost‐effective bifunctional catalyst with high performance in the ORR and OER for application in hybrid Li?O₂ batteries.     

A Universal and Facile Way for the Development of Superior Bifunctional Electrocatalysts for Oxygen Reduction and Evolution Reactions Utilizing the Synergistic Effect

Increasing energy demands have stimulated intense research activities on reversible electrochemical conversion and storage systems with high efficiency, low cost, and environmental benignity. It is highly challenging but desirable to develop efficient bifunctional catalysts for both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). A universal and facile method for the development of bifunctional electrocatalysts with outstanding electrocatalytic activity for both the ORR and OER in alkaline medium is reported. A mixture of Pt/C catalyst with superior ORR activity and a perovskite oxide based catalyst with outstanding OER activity was employed in appropriate ratios, and prepared by simple ultrasonic mixing. Nanosized platinum particles with a wide range of platinum to oxide mass ratios was realized easily in this way. The as‐formed Pt/C–oxide composites showed better ORR activity than a single Pt/C catalyst and better OER activity than a single oxide to bring about much improved bifunctionality (ΔE is only ≈0.8 V for Pt/C–BSCF; BSCF=Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3?δ), due to the synergistic effect. The electronic transfer mechanism and the rate‐determining step and spillover mechanism were two possible origins of such a synergistic effect. Additionally, the phenomenon was found to be universal, although the best performance could be reached at different platinum to oxide mass ratios for different oxide catalysts. This work thus provides an innovative strategy for the development of new bifunctional electrocatalysts with wide application potentials in high‐energy and efficient electrochemical energy storage and conversion.     

A Bifunctional Hybrid Electrocatalyst for Oxygen Reduction and Oxygen Evolution Reactions: Nano-Co3O4-Deposited La0.5Sr0.5MnO3 via Infiltration

For rechargeable metal–air batteries, which are a promising energy storage device for renewable and sustainable energy technologies, the development of cost-effective electrocatalysts with effective bifunctional activity for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) has been a challenging task. To realize highly effective ORR and OER electrocatalysts, we present a hybrid catalyst, Co₃O₄-infiltrated La_0.5Sr_0.5MnO_3-δ (LSM@Co₃O₄), synthesized using an electrospray and infiltration technique. This study expands the scope of the infiltration technique by depositing ~18 nm nanoparticles on unprecedented ~70 nm nano-scaffolds. The hybrid LSM@Co₃O₄ catalyst exhibits high catalytic activities for both ORR and OER (~7 times, ~1.5 times, and ~1.6 times higher than LSM, Co₃O₄, and IrO₂, respectively) in terms of onset potential and limiting current density. Moreover, with the LSM@Co₃O₄, the number of electrons transferred reaches four, indicating that the catalyst is effective in the reduction reaction of O₂ via a direct four-electron pathway. The study demonstrates that hybrid catalysts are a promising approach for oxygen electrocatalysts for renewable and sustainable energy devices.     

Enhanced Intrinsic Catalytic Activity of λ‐MnO2 by Electrochemical Tuning and Oxygen Vacancy Generation

Chemically prepared λ‐MnO₂ has not been intensively studied as a material for metal–air batteries, fuel cells, or supercapacitors because of their relatively poor electrochemical properties compared to α‐ and δ‐MnO₂. Herein, through the electrochemical removal of lithium from LiMn₂O₄, highly crystalline λ‐MnO₂ was prepared as an efficient electrocatalyst for the oxygen reduction reaction (ORR). The ORR activity of the material was further improved by introducing oxygen vacancies (OVs) that could be achieved by increasing the calcination temperature during LiMn₂O₄ synthesis; a concentration of oxygen vacancies in LiMn₂O₄ could be characterized by its voltage profile as the cathode in a lithiun–metal half‐cell. λ‐MnO_2?z prepared with the highest OV exhibited the highest diffusion‐limited ORR current (5.5 mA cm^?2) among a series of λ‐MnO_2?z electrocatalysts. Furthermore, the number of transferred electrons (n) involved in the ORR was >3.8, indicating a dominant quasi‐4‐electron pathway. Interestingly, the catalytic performances of the samples were not a function of their surface areas, and instead depended on the concentration of OVs, indicating enhancement in the intrinsic catalytic activity of λ‐MnO₂ by the generation of OVs. This study demonstrates that differences in the electrochemical behavior of λ‐MnO₂ depend on the preparation method and provides a mechanism for a unique catalytic behavior of cubic λ‐MnO₂.     

氧空位和磷掺杂协同增强铁钴基材料电解水催化性能

为了研发高效、稳定的电解水催化剂,我们以氧空位和磷掺杂为基础,通过原位浸泡生长和两步热处理的方法,在泡沫铁上合成具有氧空位和磷掺杂的纳米花结构作为析氢反应(HER)和析氧反应(OER)双功能电催化剂。CoFe₂O₄已被报道为一种很有前途的OER和氧还原反应(ORR)电催化剂,然而CoFe₂O₄在HER中表现出电导率差、电催化反应慢的特性。CoFe₂O₄中氧空位(Ov)的形成可以有效调控催化剂表面的电子结构,有助于产生更多的缺陷和空位,从而提高OER的活性。随后,引入磷原子填充在空位中,制备的P-Ov-CoFe₂O₄/IF在碱性电催化测试中展现出优异的HER和OER性能,在10 mA·cm^-2电流密度下HER和OER过电位仅为54和191 mV,Tafel斜率分别为57和54 mV·dec^-1,并具有良好的循环稳定性。     

Surface Reorganization on Electrochemically‐Induced Zn–Ni–Co Spinel Oxides for Enhanced Oxygen Electrocatalysis

Herein, we highlight redox‐inert Zn²⁺ in spinel‐type oxide (Zn_XNi_1?XCo₂O₄) to synergistically optimize physical pore structure and increase the formation of active species on the catalyst surface. The presence of Zn²⁺ segregation has been identified experimentally and theoretically under oxygen‐evolving condition, the newly formed V_Zn?O?Co allows more suitable binding interaction between the active center Co and the oxygenated species, resulting in superior ORR performance. Moreover, a liquid flow Zn–air battery is constituted employing the structurally optimized Zn_0.4Ni_0.6Co₂O₄ nanoparticles supported on N‐doped carbon nanotube (ZNCO/NCNTs) as an efficient air cathode, which presents remarkable power density (109.1 mW cm^?2), high open circuit potential (1.48 V vs. Zn), excellent durability, and high‐rate performance. This finding could elucidate the experimentally observed enhancement in the ORR activity of Zn_XNi_1?XCo₂O₄ oxides after the OER test.     

Electrocatalytic Behavior of an Amide Functionalized Mn(II) Coordination Polymer on ORR,OER and HER

The new 3D coordination polymer (CP) [Mn(L)(HCOO)]_n (Mn-CP) [L = 4-(pyridin-4-ylcarbamoyl)benzoate] was synthesised via a hydrothermal reaction using the pyridyl amide functionalized benzoic acid HL. It was characterized by elemental, FT-IR spectroscopy, single-crystal and powder X-ray diffraction (PXRD) analyses. Its structural features were disclosed by single-crystal X-ray diffraction analysis, which revealed a 3D structure with the monoclinic space group P21/c. Its performance as an electrocatalyst for oxygen reduction (ORR), oxygen evolution (OER), and hydrogen evolution (HER) reactions was tested in both acidic (0.5 M H₂SO₄) and alkaline (0.1 M KOH) media. A distinct reduction peak was observed at 0.53 V vs. RHE in 0.1 M KOH, which corresponds to the oxygen reduction, thus clearly demonstrating the material’s activity for the ORR. Tafel analysis revealed a Tafel slope of 101 mV dec⁻¹ with mixed kinetics of 2e⁻ and 4e⁻ pathways indicated by the Koutecky–Levich analysis. Conversely, the ORR peak was not present in 0.5 M H₂SO₄ indicating no activity of Mn-CP for this reaction in acidic media. In addition, Mn-CP demonstrated a noteworthy activity toward OER and HER in acidic media, in contrast to what was observed in 0.1 M KOH.     

Molecular Engineering of a 3D Self‐Supported Electrode for Oxygen Electrocatalysis in Neutral Media

Electrodes for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are required in energy conversion and storage technologies. An assembly strategy involves covalently grafting Co corrole 1 onto Fe₃O₄ nanoarrays grown on Ti mesh. The resulted electrode shows significantly improved activity and durability for OER and ORR in neutral media as compared to Fe₃O₄ alone and with directly adsorbed 1 . It also displays higher atom efficiency (at least two magnitudes larger turnover frequency) than reported electrodes. Using this electrode in a neutral Zn‐air battery, a small charge–discharge voltage gap of 1.19 V, large peak power density of 90.4 mW cm^?2, and high rechargeable stability for >100 h are achieved, opening a promising avenue of molecular electrocatalysis in a metal–air battery. This work shows a molecule‐engineered electrode for electrocatalysis and demonstrates their potential applications in energy conversion and storage.     

Nitrogen,Phosphorus, and Fluorine Tri‐doped Graphene as a Multifunctional Catalyst for Self‐Powered Electrochemical Water Splitting

Electrocatalysts are required for clean energy technologies (for example, water‐splitting and metal‐air batteries). The development of a multifunctional electrocatalyst composed of nitrogen, phosphorus, and fluorine tri‐doped graphene is reported, which was obtained by thermal activation of a mixture of polyaniline‐coated graphene oxide and ammonium hexafluorophosphate (AHF). It was found that thermal decomposition of AHF provides nitrogen, phosphorus, and fluorine sources for tri‐doping with N, P, and F, and simultaneously facilitates template‐free formation of porous structures as a result of thermal gas evolution. The resultant N, P, and F tri‐doped graphene exhibited excellent electrocatalytic activities for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). The trifunctional metal‐free catalyst was further used as an OER–HER bifunctional catalyst for oxygen and hydrogen gas production in an electrochemical water‐splitting unit, which was powered by an integrated Zn–air battery based on an air electrode made from the same electrocatalyst for ORR. The integrated unit, fabricated from the newly developed N, P, and F tri‐doped graphene multifunctional metal‐free catalyst, can operate in ambient air with a high gas production rate of 0.496 and 0.254 μL s^?1 for hydrogen and oxygen gas, respectively, showing great potential for practical applications.     

Photo‐excited Oxygen Reduction and Oxygen Evolution Reactions Enable a High‐Performance Zn–Air Battery

The storage of solar energy in battery systems is pivotal for a sustainable society, which faces many challenges. Herein, a Zn–air battery is constructed with two cathodes of poly(1,4‐di(2‐thienyl))benzene (PDTB) and TiO₂ grown on carbon papers to sandwich a Zn anode. The PDTB cathode is illuminated in a discharging process, in which photoelectrons are excited into the conduction band of PDTB to promote oxygen reduction reaction (ORR) and raise the output voltage. In a reverse process, holes in the valence band of the illuminated TiO₂ cathode are driven for the oxygen evolution reaction (OER) by an applied voltage. A record‐high discharge voltage of 1.90 V and an unprecedented low charge voltage of 0.59 V are achieved in the photo‐involved Zn–air battery, regardless of the equilibrium voltage. This work offers an innovative pathway for photo‐energy utilization in rechargeable batteries.     

Integrating NiCo Alloys with Their Oxides as Efficient Bifunctional Cathode Catalysts for Rechargeable Zinc–Air Batteries

The lack of high‐efficient, low‐cost, and durable bifunctional electrocatalysts that act simultaneously for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) is currently one of the major obstacles to commercializing the electrical rechargeability of zinc–air batteries. A nanocomposite CoO‐NiO‐NiCo bifunctional electrocatalyst supported by nitrogen‐doped multiwall carbon nanotubes (NCNT/CoO‐NiO‐NiCo) exhibits excellent activity and stability for the ORR/OER in alkaline media. More importantly, real air cathodes made from the bifunctional NCNT/CoO‐NiO‐NiCo catalysts further demonstrated superior performance to state‐of‐the‐art Pt/C or Pt/C+IrO₂ catalysts in primary and rechargeable zinc–air batteries.     

Bio-inspired Design of Bidirectional Oxygen Reduction and Oxygen Evolution Reaction Molecular Electrocatalysts

The proper utilization of renewable energy sources has emerged as a major challenge in our pursuit of a sustainable and carbon-neutral energy landscape. Small molecule activation is a key component for proper utilization of renewable energy resources, where O₂/H₂O redox couple is reckoned to be a potential game changer. In this regard, electrocatalytic oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) have become the prime interest of catalyst designers. Typically, these ORR and OER electrocatalysts are developed distinctly; however, very soon, the requirement of a bidirectional ORR/OER electrocatalyst becomes obvious for practical applicability and rapid energy transduction purposes. A bidirectional catalyst is defined as a catalyst capable of driving a redox reaction in opposing directions. This review has portrayed the development of enzyme structure-inspired design of molecular bidirectional ORR/OER catalysts. The strategic incorporation of secondary and outer coordination sphere features has significantly enhanced the performance of these catalysts, which can be monitored via the key catalytic parameters. These bifunctional OER/ORR catalysts are vital for metal-air battery and fuel cell applications and appropriately poised to lay the foundation for an efficient, economical, and eco-friendly pathway for sustainable energy usage with the rational assembly of energy converting and storage devices.     

Ni3FeN‐Supported Fe3Pt Intermetallic Nanoalloy as a High‐Performance Bifunctional Catalyst for Metal–Air Batteries

Electrocatalysts for both the oxygen reduction and evolution reactions (ORR and OER) are vital for the performances of rechargeable metal–air batteries. Herein, we report an advanced bifunctional oxygen electrocatalyst consisting of porous metallic nickel‐iron nitride (Ni₃FeN) supporting ordered Fe₃Pt intermetallic nanoalloy. In this hybrid catalyst, the bimetallic nitride Ni₃FeN mainly contributes to the high activity for the OER while the ordered Fe₃Pt nanoalloy contributes to the excellent activity for the ORR. Robust Ni₃FeN‐supported Fe₃Pt catalysts show superior catalytic performance to the state‐of‐the‐art ORR catalyst (Pt/C) and OER catalyst (Ir/C). The Fe₃Pt/Ni₃FeN bifunctional catalyst enables Zn–air batteries to achieve a long‐term cycling performance of over 480 h at 10 mA cm⁻² with high efficiency. The extraordinarily high performance of the Fe₃Pt/Ni₃FeN bifunctional catalyst makes it a very promising air cathode in alkaline electrolyte.     

A Surface‐Oxide‐Rich Activation Layer (SOAL) on Ni2Mo3N for a Rapid and Durable Oxygen Evolution Reaction

The oxygen evolution reaction (OER) is key to renewable energy technologies such as water electrolysis and metal–air batteries. However, the multiple steps associated with proton‐coupled electron transfer result in sluggish OER kinetics and catalysts are required. Here we demonstrate that a novel nitride, Ni₂Mo₃N, is a highly active OER catalyst that outperforms the benchmark material RuO₂. Ni₂Mo₃N exhibits a current density of 10 mA cm^?2 at a nominal overpotential of 270 mV in 0.1 m KOH with outstanding catalytic cyclability and durability. Structural characterization and computational studies reveal that the excellent activity stems from the formation of a surface‐oxide‐rich activation layer (SOAL). Secondary Mo atoms on the surface act as electron pumps that stabilize oxygen‐containing species and facilitate the continuity of the reactions. This discovery will stimulate the further development of ternary nitrides with oxide surface layers as efficient OER catalysts for electrochemical energy devices.     

Manganese-Modulated Cobalt-Based Layered Double Hydroxide Grown on Nickel Foam with 1D–2D–3D Heterostructure for Highly Efficient Oxygen Evolution Reaction and Urea Oxidation Reaction

Hydrogen production by energy-efficient water electrolysis is a green avenue for the development of contemporary society. However, the oxygen evolution reaction (OER) and the urea oxidation reaction (UOR) occurring at the anode are impeded by the sluggish reaction kinetics during the water-splitting process. Consequently, it is promising to develop bifunctional anodic electrocatalysts consisting of nonprecious metals. Herein, a bifunctional CoMn layered double hydroxide (LDH) was grown on nickel foam (NF) with a 1D–2D–3D hierarchical structure for efficient OER and UOR performance in alkaline solution. Owing to the significant synergistic effect of Mn doping and heterostructure engineering, the obtained Co₁Mn₁ LDH/NF exhibits satisfactory OER activity with a low potential of 1.515 V to attain 10 mA cm⁻². Besides, the potential of the Co₁Mn₁ LDH/NF catalyst for UOR at the same current density is only 1.326 V, which is much lower than those of its counterparts and most reported electrocatalysts. An urea electrolytic cell with a Co₁Mn₁ LDH/NF anode and a Pt–C/NF cathode was established, and a low cell voltage of 1.354 V at 10 mA cm⁻² was acquired. The optimized strategy may result in promising candidates for developing a new generation of bifunctional electrocatalysts for clean energy production.     

Co@Co3O4 Encapsulated in Carbon Nanotube‐Grafted Nitrogen‐Doped Carbon Polyhedra as an Advanced Bifunctional Oxygen Electrode

Efficient reversible oxygen electrodes for both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) are vitally important for various energy conversion devices, such as regenerative fuel cells and metal–air batteries. However, realization of such electrodes is impeded by insufficient activity and instability of electrocatalysts for both water splitting and oxygen reduction. We report highly active bifunctional electrocatalysts for oxygen electrodes comprising core–shell Co@Co₃O₄ nanoparticles embedded in CNT‐grafted N‐doped carbon‐polyhedra obtained by the pyrolysis of cobalt metal–organic framework (ZIF‐67) in a reductive H₂ atmosphere and subsequent controlled oxidative calcination. The catalysts afford 0.85 V reversible overvoltage in 0.1 m KOH, surpassing Pt/C, IrO₂, and RuO₂ and thus ranking them among one of the best non‐precious‐metal electrocatalysts for reversible oxygen electrodes.     

A Bifunctional Hybrid Electrocatalyst for Oxygen Reduction and Evolution: Cobalt Oxide Nanoparticles Strongly Coupled to B,N‐Decorated Graphene

The electrocatalyzed oxygen reduction and evolution reactions (ORR and OER, respectively) are the core components of many energy conversion systems, including water splitting, fuel cells, and metal–air batteries. Rational design of highly efficient non‐noble materials as bifunctional ORR/OER electrocatalysts is of great importance for large‐scale practical applications. A new strongly coupled hybrid material is presented, which comprises CoO_x nanoparticles rich in oxygen vacancies grown on B,N‐decorated graphene (CoO_x NPs/BNG) and operates as an efficient bifunctional OER/ORR electrocatalyst. Advanced spectroscopic techniques were used to confirm formation of abundant oxygen vacancies and strong Co−N−C bridging bonds within the CoO_x NPs/BNG hybrid. Surprisingly, the CoO_x NPs/BNG hybrid electrocatalyst is highly efficient for the OER with a low overpotential and Tafel slope, and is active in the ORR with a positive half‐wave potential and high limiting current density in alkaline medium.     

A Bifunctional Hybrid Electrocatalyst for Oxygen Reduction and Evolution: Cobalt Oxide Nanoparticles Strongly Coupled to B,N-Decorated Graphene

The electrocatalyzed oxygen reduction and evolution reactions (ORR and OER, respectively) are the core components of many energy conversion systems, including water splitting, fuel cells, and metal–air batteries. Rational design of highly efficient non-noble materials as bifunctional ORR/OER electrocatalysts is of great importance for large-scale practical applications. A new strongly coupled hybrid material is presented, which comprises CoO_x nanoparticles rich in oxygen vacancies grown on B,N-decorated graphene (CoO_x NPs/BNG) and operates as an efficient bifunctional OER/ORR electrocatalyst. Advanced spectroscopic techniques were used to confirm formation of abundant oxygen vacancies and strong Co−N−C bridging bonds within the CoO_x NPs/BNG hybrid. Surprisingly, the CoO_x NPs/BNG hybrid electrocatalyst is highly efficient for the OER with a low overpotential and Tafel slope, and is active in the ORR with a positive half-wave potential and high limiting current density in alkaline medium.