Reversibly Controlling Preferential Protein Adsorption on Bone Implants by Using an Applied Weak Potential as a Switch

A facile method is needed to control the protein adsorption onto biomaterials, such as, bone implants. Herein we doped taurocholic acid (TCA), an amphiphilic biomolecule, into an array of 1D nano‐architectured polypyrrole (NAPPy) on the implants. Doping TCA enabled the implant surface to show reversible wettability between 152° (superhydrophobic, switch‐on state) and 55° (hydrophilic, switch‐off state) in response to periodically switching two weak electrical potentials (+0.50 and ?0.80 V as a switch‐on and switch‐off potential, respectively). The potential‐switchable reversible wettability, arising from the potential‐tunable orientation of the hydrophobic and hydrophilic face of TCA, led to potential‐switchable preferential adsorption of proteins as well as cell adhesion and spreading. This potential‐switchable strategy may open up a new avenue to control the biological activities on the implant surface.     

Smart zwitterionic membranes with on/off behavior for protein transport

Poly(acrylonitrile) (PAN)-based zwitterionic membranes, composed of PAN and poly( N, N-dimethyl- N-methacryloxyethyl- N-(3-sulfopropyl) copolymer, are electrolyte-sensitive smart membranes. The hydrophilicity was increased and protein adsorption was remarkably decreased for the membranes in response to environmental stimuli. FTIR spectroscopic analysis directly provided molecular-level observation of the enhanced dissociation and hydration of zwitterionic sulfobetaine dipoles at higher electrolyte concentrations. The smart PAN-based zwitterionic membranes can close or open channels for protein transport under different NaCl concentrations. The electrolyte-sensitive switch of on/off behavior for protein transport is reversible.     

Robust solvent‐free fabrication and characterization of (polydimethylsiloxane‐co‐2‐hydroxyethylmethacrylate)/poly (ethylene glycol) methacrylate (PDMS‐HEMA)/PEGMA hydrogels

Combining hydrophobic materials such as polydimethylsiloxane (PDMS), a natural hydrophobic material with typical hydrophilic monomers without using organic solvent remains a big challenge due to their extreme different properties; hence, fabricating a class of silicone hydrogels with two extremes without use of organic solvents could bring us a novel class of silicone hydrogels. Herein, a range of PDMS‐HEMA‐PEGMA hydrogels was prepared from hydroxyl‐terminated PDMS, 2‐hydroxyethylmethacrylate (HEMA), poly (ethylene glycol) methacrylate (PEGMA), and isophorone diisocyanate via condensation and radical copolymerization reactions. The infrared results confirmed the PDMS‐HEMA‐PEGMA network formation, while the hydrophilicity of the as‐prepared block copolymer was dependent on (PDMS‐HEMA)/PEGMA ratio. Increasing the PEGMA content resulted in increased equilibrium water content, phase separation, surface roughness, and tensile strength, while the tensile modulus, elongation at break, optical transmittance, water contact angle, and oxygen permeability (Dk) were decreasing. At PEGMA content of 28.3%, the relative protein adsorption ratio decreased to 20% and 36% for bovine serum albumin and lysozyme, respectively, compared with that of the control (PDMS‐HEMA), suggesting antiprotein adsorption ability. In overall, the results showed that the PDMS‐HEMA‐PEGMA hydrogels not only exhibited remarkable hydrophilicity and suppressed protein adsorption but also maintained higher optical transparency and oxygen permeability (Dk).     

Cleaning requirements for silica‐coated sensors used in optical waveguide lightmode spectroscopy

Optical waveguide lightmode spectroscopy (OWLS), based on the incoupling of laser light into a waveguide sensor by an optical grating, allows for the in situ measurement of protein adsorption. Few reports have described cleaning methods for the surfaces of such sensors, and in this investigation, we compare common methods for cleaning of silica surfaces in relation to their effectiveness for cleaning silica‐coated waveguide sensors used in OWLS. For this purpose, atomic force microscopy (AFM) analysis of surface morphology and OWLS detection of protein adsorption kinetics were used to evaluate waveguide sensors before and after cleaning. While AFM line scans showed a substantial increase in average waveguide peak‐to‐valley height after RCA cleaning relative to all other methods tested, chemical etching owing to the alkaline component of the rolling circle amplification method rendered the waveguide unusable for detection of protein adsorption with OWLS. A revised method, based on replacement of the alkaline step with immersion in sodium dodecyl sulfate, was not only effective at cleaning OWLS waveguides off‐the‐shelf but also showed excellent protein adsorption reproducibility after ex situ cleaning. Moreover, the revised method showed excellent reproducibility when applied in situ, between repeated adsorption‐elution cycles. Copyright © 2013 John Wiley & Sons, Ltd.     

Fibronectin conformation switch induced by coadsorption with human serum albumin

The dynamic adsorption of human serum albumin (HSA) and plasma fibronectin (Fn) onto hydrophobic poly(hydroxymethylsiloxane) (PHMS) and the structures of adsorbed protein layers from single and binary protein solutions were studied. Spectroscopic ellipsometry (SE) and quartz crystal microbalance with dissipation monitoring (QCM-D) together with atomic force microscopy (AFM) were used to measure the effective mass, thickness, viscoelastic properties, and morphology of the adsorbed protein films. Adsorbed HSA formed a rigid, tightly bound monolayer of deformed protein, and Fn adsorption yielded a thick, very viscoelastic layer that was firmly bound to the substrate. The mixed protein layers obtained from the coadsorption of binary equimolecular HSA-Fn solutions were found to be almost exclusively dominated by Fn molecules. Further sequential adsorption experiments showed little evidence of HSA adsorbed onto the predeposited Fn layer (denoted as Fn ? HSA), and Fn was not adsorbed onto predeposited HSA (HSA ? Fn). The conformational arrangement of the adsorbed Fn was analyzed in terms of the relative availability of two Fn domains. In particular, (4)F(1)·(5)F(1) binding domains in the Hep I fragment, close to the amino terminal of Fn, were targeted using a polyclonal antifibronectin antibody (anti-Fn), and the RGD sequence in the 10th segment, in the central region of the molecule, was tested by cell culture experiments. The results suggested that coadsorption with HSA induced the Fn switch from an open conformation, with the amino terminal subunit oriented toward the solution, to a close conformation, with the Fn central region oriented toward the solution.     

Adsorption kinetics of protein mixtures. A tentative explanation of “the vroman effect”

A model for protein adsorption kinetics is presented. This model includes diffusion limited adsorption, adsorption and desorption rate constants which are dependent on the surface concentration and an interaction term for the mutual influence of the adsorbed protein molecules. It is shown that, in first approximation, the values of the adsorption and desorption rate constants are exponential functions of the surface concentration. Assuming an adequate interaction term it is possible to show with this model for the adsorption kinetics of a mixture of proteins that the ratio of the adsorbed proteins is strongly dependent on the overall surface concentration even if the ratio of the bulk concentrations of these proteins is kept constant. Differences in interaction terms for the different proteins offer a possible explanation for the peculiar behaviour of plasma protein adsorption on a surface at different dilutions of the plasma, the so called “Vroman effect”.     

Immobilization of hemoglobin on SBA-15 applied to the electrocatalytic reduction of H<Subscript>2</Subscript>O<Subscript>2</Subscript>

The direct electron transfer between hemoglobin (Hb) and an electrode was realized by first immobilizing the protein onto SBA-15.The results of the immobilization showed that the adsorption was pH-dependent with a maximum adsorption near the isoelectric point of the protein, and SBA-15 with a larger pore diameter showed greater adsorption capacity for Hb. UV–vis spectroscopy and nitrogen adsorption analysis indicated that Hb was adsorbed within the channel of SBA-15 and no significant denaturation occurred to the protein. The Hb/SBA-15 composite obtained was used for the fabrication of a Hb biosensor to detect hydrogen peroxide. A pair of well-defined redox peaks at −0.337 and −0.370 V on the Hb/SBA-15 composite modified glassy carbon electrode was observed, and the electrode reactions showed a surface-controlled process with a single proton transfer at a scan rate range from 20 to 1,000 mV/s. The sensor showed a fast amperometric response, a low detection limit (2.3 × 10⁻⁹ M) and good stability for the detection of H₂O₂. The electrochemical results indicated that the immobilized Hb still retained its biological activity.     

Comparison of the protein adsorption selectivity of salt-promoted agarose-based adsorbents: Hydrophobic, thiophilic and electron donor–acceptor adsorbents

Protein adsorption of human serum onto six different agarose-based chromatographic gels that were representative of the salt-promoted adsorbent family [octyl- and phenyl-Sepharose, mercaptoethanol–divinyl sulfone agarose (T gel), mercaptomethylene pyridine-derivatized agarose gel (MP gel), tricyanoaminopropene–divinyl sulfone agarose (DVS–TCP gel), tricyanoamino-propene–bisoxirane agarose (bisoxirane–TCP gel)] was studied in the presence of moderate or high concentrations of the water structuring salt, sodium sulfate. Study of the protein adsorption selectivity by two-dimensional gel electrophoresis revealed an opposed selectivity for hydrophobic interaction adsorbents and electron donor–acceptor adsorbents. The T gel, MP gel and TCP gels belonged to the electron donor–acceptor adsorbents, displaying a main selectivity for immunoglobulins, whereas octyl-Sepharose belonged to the hydrophobic adsorbents, displaying a main selectivity for ‘hydrophobic' proteins. Phenyl-Sepharose for its part was described as an example of a composite selectivity of both families. The conclusion of this work is two-fold: (1) hydrophobic interaction chromatography (HIC) and electron donor–acceptor chromatography (EDAC) have opposed protein selectivities and are both salt-promoted. As a main consequence, it means that high concentrations of a water-structuring salt can promote different types of weak molecular interactions, resulting in different protein adsorption selectivities: (2) thiophilic adsorption chromatography (TAC) should be renamed EDAC as similar protein selectivity is demonstrated for electron donor–acceptor ligand devoid of sulfur atoms.     

Reversible Calcium(II)‐Ion Binding through an Apparent pKa Shift of Thermosensitive Block‐Copolymer Micelles

There is an increasing need for smart materials capable of removing multivalent ions from aqueous streams without the inconvenience of brine regeneration as in ion‐exchange processes. Herein, we present a thermoresponsive micellar system consisting of polystyrene–poly(methoxy diethyleneglycol acrylate) block copolymer surfactants modified with carboxylic acid end groups (PS‐PMDEGA‐COOH) that can be used to switch between the adsorption and desorption of divalent calcium(II) cations by a mild temperature trigger, thus providing a new type of thermoregenerable ion‐adsorbing materials. The switch of calcium(II)‐binding capacity is demonstrated to result from a shift in the pK_a value of the carboxylic acid groups by the collapse and redissolution of the PMDEGA block and the associated change in local polarity.     

Structure of mixed beta-lactoglobulin/pectin adsorbed layers at air/water interfaces; a spectroscopy study

Based on earlier reported surface rheological behaviour two factors appeared to be important for the functional behaviour of mixed protein/polysaccharide adsorbed layers at air/water interfaces: (1) protein/polysaccharide mixing ratio and (2) formation history of the layers. In this study complexes of beta-lactoglobulin (positively charged at pH 4.5) and low methoxyl pectin (negatively charged) were formed at two mixing ratios, resulting in negatively charged and nearly neutral complexes. Neutron reflection showed that adsorption of negative complexes leads to more diffuse layers at the air/water interface than adsorption of neutral complexes. Besides (simultaneous) adsorption of protein/polysaccharide complexes, a mixed layer can also be formed by adsorption of (protein/)polysaccharide (complexes) to a pre-formed protein layer (sequential adsorption). Despite similar bulk concentrations, adsorbed layer density profiles of simultaneously and sequentially formed layers were persistently different, as illustrated by neutron reflection analysis. Time resolved fluorescence anisotropy showed that the mobility of protein molecules at an air/water interface is hampered by the presence of pectin. This hampered mobility of protein through a complex layer could account for differences observed in density profiles of simultaneously and sequentially formed layers. These insights substantiated the previously proposed organisations of the different adsorbed layers based on surface rheological data.     

Quantitative display of the redox status of proteins with maleimide‐polyethylene glycol tagging

Cysteine oxidation, either biologically reversible or irreversible, is the main posttranslational modification associated with redox signaling and oxidative stress. Maleimide‐polyethylene glycol (m‐PEG) has been used to detect reversibly oxidized proteins by reacting to the reduced cysteine residues leading to mobility shift in immunoblots; a method called PEG‐switch. With PEG‐switch, both reduced and oxidized proteins can be observed on the same immunoblot simultaneously, providing a simple quantitative measurement for protein thiol modifications. In this report, we optimized the assay conditions and exploited the applications of PEG‐switch in quantitation of the extent of protein thiol oxidation in cells in response to H₂O₂ and insulin. In addition, we have proposed a redox scoring system for measuring the redox status of any given protein from the m‐PEG immunoblot. Our results provided quantitative data showing that two cysteine residues of protein tyrosine phosphatase 1B are prone to oxidation following insulin treatment in cultured HeLa cells.     

Vapor‐Surface Sol‐Gel Deposition of Titania Alternated with Protein Adsorption for Assembly of Electroactive,Enzyme‐Active Films

Combining vapor‐surface sol‐gel deposition of titania with alternate adsorption of oppositely charged iron heme proteins provided ultrathin {TiO₂/protein}_n films with reversible voltammetry extended to 15 TiO₂/protein bilayers, more than twice that of more conventional polyion‐protein or nanoparticle‐protein films made by alternate layer‐by‐layer adsorption. Catalytic activity toward O₂, H₂O₂, and NO was also improved significantly compared to the conventionally fabricated films. The method involves vaporization of titanium butoxide into thin films of water, forming porous TiO₂ sol‐gel layers. Myoglobin (Mb), hemoglobin (Hb), and horseradish peroxidase (HRP) were assembled by adsorption alternated with the vapor‐deposited TiO₂ layers. Improved electrochemical and catalytic performance may be related to better film permeability leading to better mass transport within the films, as suggested by studies with soluble voltammetric probes, scanning electron microscopy (SEM) and atomic force microscopy (AFM). The electrochemical and electrocatalytic activity of the films can be controlled by tailoring the amount of water with which the metal alkoxide precursor vapor reacts and the number of bilayers deposited in the assembly.     

Dynamic adsorption and characterization of phospholipid and mixed phospholipid/protein layers at liquid/liquid interfaces

Drop profile analysis tensiometry is applied to study the adsorption dynamics of phospholipids, proteins and phospholipid/protein mixtures at liquid/liquid interfaces. Measurements of the dynamic interfacial tension of phospholipid layers give information on the adsorption mechanism and the structure of the adsorption layer. The equilibrium and dynamic adsorption of pure protein solutions, i.e. human serum album (HSA), beta-lactoglobulin (beta-LG), beta-casein (beta-CA), can be explained well by the thermodynamic model of Frumkin and the diffusion-controlled adsorption theory. The adsorption behavior from mixed phospholipid/protein solutions was also investigated in terms of dynamic interfacial tensions. Interestingly, a "skin-like" folded film of pure protein or phospholipid/protein complex layers can be observed at curved surfaces at the water/oil interfaces. The addition of phospholipids accelerates the formation of the folded structure at the drop surface through co-adsorption of proteins.     

A Solid‐State Protein Junction Serves as a Bias‐Induced Current Switch

A sample‐type protein monolayer, that can be a stepping stone to practical devices, can behave as an electrically driven switch. This feat is achieved using a redox protein, cytochrome C (CytC), with its heme shielded from direct contact with the solid‐state electrodes. Ab initio DFT calculations, carried out on the CytC–Au structure, show that the coupling of the heme, the origin of the protein frontier orbitals, to the electrodes is sufficiently weak to prevent Fermi level pinning. Thus, external bias can bring these orbitals in and out of resonance with the electrode. Using a cytochrome C mutant for direct S?Au bonding, approximately 80 % of the Au–CytC–Au junctions show at greater than 0.5 V bias a clear conductance peak, consistent with resonant tunneling. The on–off change persists up to room temperature, demonstrating reversible, bias‐controlled switching of a protein ensemble, which, with its built‐in redundancy, provides a realistic path to protein‐based bioelectronics.     

Research of protein adsorption on the different surface topography of the zinc oxide

The effect of the surface topography on the protein adsorption process is of great significance for designing biomaterial surfaces and the biocompatibility for specific biomedical applications. In this work, we have systematically investigated the mono‐protein adsorption kinetics of bovine serum albumin (BSA) and fibrinogen (Fg) adsorbed on the four different surface topographies (nanoparticles (NPs), nanorods (NRs), nanosheets (NSs) and nanobeams (NBs) of Zinc oxide (ZnO), respectively. The competition of multi‐protein adsorbed on them has been studied as well. Results showed that each protein had a singular process of adsorption that fitted well by Spreading Particle Model (SPM). It confirmed that ZnO NRs compared with other samples had more adsorption sites, which could provide more opportunities for the interaction between material and protein molecules. In addition, the Fg compared to the BSA could be more tightly adsorbed to the surface, both of which existed slight conformational changes by Fourier transform infrared (FTIR) and circular dichroism spectra (CD). Taken together, all these consequences well demonstrated that NRs may have wider applications in designing biomaterial surfaces and the biocompatibility for implanted biomaterials. Copyright © 2014 John Wiley & Sons, Ltd.     

A Mix‐and‐Read Fluorescence Strategy for the Switch‐On Probing of Kinase Activity Based on an Aptameric‐Peptide/Graphene‐Oxide Platform

Protein kinase plays a vital role in regulating signal‐transduction pathways and its simple and quick detection is highly desirable because traditional kinase assays typically rely on a time‐consuming kinase‐phosphorylation process (ca. 1 h). Herein, we report a new and rapid fluorescence‐based sensing platform for probing the activity of protein kinase that is based on the super‐quenching capacity of graphene oxide (GO) nanosheets and specific recognition of the aptameric peptide (FITC‐IP₂₀). On the GO/peptide platform, the fluorescence quenching of FITC‐IP₂₀ that is adsorbed onto GO can be restored by selective binding of active protein kinase to the aptameric peptide, thereby resulting in the fast switch‐on detection of kinase activity (ca. 15 min). The feasibility of this method has been demonstrated by the sensitive measurement of the activity of cAMP‐dependent protein kinase (PKA), with a detection limit of 0.053 mU μL^?1. This assay technique was also successfully applied to the detection of kinase activation in cell lysate.     

Effect of annealing on the microphase separated behavior and properties of PDMS–MDI–PEG multiblock copolymer films

A model multiblock copolymer based on (Poly dimethylsiloxane) (PDMS),–4, 4′‐diphenylmethanediisocyanate (MDI)–(poly ethylene glycol) (PEG) was synthesized by employing two step growth polymerization technique. The effect of annealing on microphase separation of the copolymer surface and bulk, surface composition, hydrogen‐bonding and some properties was investigated by AFM, SAXS, XPS, FTIR, contact angle measurement, and protein adsorption experiment, respectively. It was found that increasing the annealing temperature availed formation of microphase separation and surface enrichment of PDMS, which was accompanied by increase in average interdomain spacing, long period, and the crystallizing degree in the hard domains. But the best microphase separated structure seemed to occur at the annealing temperature of 140 °C; exorbitant annealing temperature might demolish the ordered structure. The annealing temperature dependence of microphase separation was further confirmed by the changes in urea hydrogen‐bonding and melting points characterized by FTIR and DSC, respectively. Protein adsorption experiments revealed that all annealed copolymer films possessed the low protein adsorption. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 208–217, 2007     

Facile preparation of a high‐capacity boronate‐affinity adsorbent based on low‐cost commercial supports for selective enrichment of cis‐diol‐containing biomolecules

Boronate‐affinity adsorbents have been regarded as favorable extraction adsorbents for the pretreatment of cis‐diol‐containing biomolecules owning to their specific selectivity, but most of them have low adsorption capacity and a tedious synthesis methods. In this study, a new boronate‐affinity material (PGMA@FPBA) with high adsorption capacity was synthesized via a “one‐pot” method based on a low‐cost commercial support. The PGMA@FPBA was characterized by Fourier transform infrared spectroscopy (FT‐IR), X‐ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), and nitrogen adsorption/desorption measurements. The as‐prepared adsorbent showed good selectivity, high adsorption capacity (448 μmol/g for catechol), and fast adsorption equilibration (1 min) for cis‐diol‐containing biomolecules. Subsequently, as an example for application, the obtained PGMA@FPBA was used as a dispersive solid‐phase extraction (d‐SPE) adsorbent for enrichment of quercetin in red wine. The results indicated that the facile‐prepared boronate‐affinity adsorbent has great potential application for separation and enrichment of cis‐diol‐containing biomolecules in complex samples.     

Easy‐to‐fabricate thin‐film coating on PDMS substrate with super hydrophilicity and stability

With the fast expansion of microfluidic applications, stable, and easy‐to‐fabricate PDMS surface coating with super hydrophilicity is highly desirable. In this study, we introduce a new kind of copolymer‐based, single‐layer thin‐film coating for PDMS. The coating can exist in air at room temperature for at least 6 months without any noticeable deterioration in the super hydrophilicity (water contact angle ～7°), resistance of protein adsorption, or inhibition of the EOF. In addition, this coating enables arbitrary patterning of cells on planar surfaces.     

Magnetic Silica‐Coated Sub‐Microspheres with Immobilized Metal Ions for the Selective Removal of Bovine Hemoglobin from Bovine Blood

Magnetic silica‐coated magnetite (Fe₃O₄) sub‐microspheres with immobilized metal‐affinity ligands are prepared for protein adsorption. First, magnetite sub‐microspheres were synthesized by a hydrothermal method. Then silica was coated on the surface of Fe₃O₄ particles using a sol–gel method to obtain magnetic silica sub‐microspheres with core‐shell morphology. Next, the trichloro(4‐chloromethylphenyl) silane was immobilized on them, reacted with iminodiacetic acid (IDA), and charged with Cu²⁺. The obtained magnetic silica sub‐microspheres with immobilized Cu²⁺ were applied for the absorption of bovine hemoglobin (BHb) and the removal of BHb from bovine blood. The size, morphology, and magnetic properties of the resulting magnetic micro(nano) spheres were investigated by using scanning microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), and a vibrating sample magnetometer (VSM). The measurements showed that the magnetic sub‐microspheres are spherical in shape, very uniform in size with a core‐shell, and are almost superparamagnetic. The saturation magnetization of silica‐coated magnetite (Fe₃O₄) sub‐microspheres reached about 33 emu g^?1. Protein adsorption results showed that the sub‐microspheres had a high adsorption capacity for BHb (418.6 mg g^?1), low nonspecific adsorption, and good removal of BHb from bovine blood. This opens a novel route for future applications in removing abundant proteins in proteomic analysis.