Photoinduced Morphological Transformations of Soft Nanotubes

In water, synthetic amphiphiles composed of a photoresponsive azobenzene moiety and an oligoglycine hydrogen‐bonding moiety selectively self‐assembled into nanotubes with solid bilayer membranes. The nanotubes underwent morphological transformations induced by photoisomerization of the azobenzene moiety within the membranes, and the nature of the transformation depended on the number of glycine residues in the oligoglycine moiety (i.e., on the strength of intermolecular hydrogen bonding). Upon UV‐light irradiation of nanotubes prepared from amphiphiles with the diglycine residue, trans‐to‐cis isomerization induced a transformation from nanotubes (inner diameter (i.d.) 7 nm), several hundreds of nanometers to several tens of micrometers in length, to imperfect nanorings (i.d. 21–38 nm). The cis‐to‐trans isomerization induced by continuous visible‐light irradiation resulted in the stacking of the imperfect nanorings to form nanotubes with an i.d. of 25 nm and an average length of 310 nm, which were never formed by a self‐assembly process. Time‐lapse fluorescence microscopy enabled us to visualize the transformation of nanotubes with an i.d. of 20 nm (self‐assembled from amphiphiles with the monoglycine residue) to cylindrical nanofibers with an i.d. of 1 nm; shrinkage of the hollow cylinders started at the two open ends with simultaneous elongation in the direction of the long axis.     

Functionally integrated liquid crystalline photochromic triple block copolymer with locally light‐ and thermal‐controllable sub‐blocks

Photoorientation and reorientation processes induced by illumination of the samples with oppositely directed polarized light and by the thermal treatment were studied for the films of triblock copolymer pAzo₁₀‐b‐pPhM₈₀‐b‐pAzo₁₀ consisting of a nematic phenyl benzoate сentral sub‐block (PhM, DP = 80) with two terminal smectic azobenzene sub‐blocks (Azo, DP = 10). For amorphized films of triblock copolymer, illumination with polarized light (λ = 546 nm) is shown to be by orientation of only Azo‐containing groups, but upon following annealing of the film, PhM groups are adjusted to the orientation of Azo fragments. It was found, that the subsequent illumination of the block copolymer sample with oppositely directed polarized light changes the orientation of azobenzene groups, while the orientation of phenyl benzoate groups is remained unchanged. Thus, the cyclic illumination of the triblock copolymer samples by the linear polarized light and subsequent thermal treatment make it possible to control and fix orientation of azobenzene and phenyl benzoate groups located in different sub‐blocks in the desired and independent manner. The comparison of these results with the data on random p(Azo₇‐ran‐PhM₃₀) copolymer of the similar composition revealed, that in the random copolymer, both Azo and PhM mesogenic groups are involved in the orientational cooperative process regardless of films process treatment. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1602–1611     

Light and pH dual‐sensitive biodegradable polymeric nanoparticles for controlled release of cargos

In this article, a light and pH dual‐sensitive block copolymer PEG‐b‐poly(MPC‐Azo/DEA) was facilely prepared for the first time by azide‐alkyne click chemistry between amphiphilic block copolymer bearing pendant alkynyl group poly(ethylene glycol)‐poly(5‐methyl‐5‐propargylxycarbonyl‐1,3‐dioxane‐2‐one) (PEG‐b‐poly(MPC)) and two azide‐containing compounds azobenzene derivative (Azo‐N₃) and 2‐azido‐1‐ethyl‐diethylamine (DEA‐N₃). Light response of the polymeric nanoparticles benefits from the azobenzene segments and pH responsiveness is attributed to DEA moieties. The prepared copolymer could self‐assemble into spherical micelle particles. The morphological changes of these particles in response to dual stimuli were investigated by UV/vis spectroscopy, dynamic light scattering (DLS), and transmission electron microscopy (TEM). Nile Red (NR) was utilized as probe, and fluorescence spectroscopy was served as an evidence for the enhanced release of cargos from polymeric nanoparticles under combined stimulation. Anticancer drug, DOX was loaded into the nanoparticles and the loaded‐DOX could be released from these nanoparticles under dual stimuli. MTT assays further demonstrated that PEG‐b‐poly(MPC) and PEG‐b‐poly(MPC‐Azo/DEA) were of biocompatibility and low toxicity against HepG2 cells as well as SMCC‐7721 cells. More importantly, the prepared DOX‐loaded nanoparticles exhibited good anticancer ability for the two cells. The synthesized light and pH dual‐sensitive biodegradable polymeric nanoparticles were expected to be platforms for precisely controlled release of encapsulated molecules. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1773–1783     

Water‐soluble triply‐responsive homopolymers of N,N‐dimethylaminoethyl methacrylate with a terminal azobenzene moiety

Novel water‐soluble triply‐responsive homopolymers of N,N‐dimethylaminoethyl methacrylate (DMAEMA) containing an azobenzene moiety as the terminal group were synthesized by atom transfer radical polymerization (ATRP) technique. The ATRP process of DMAEMA was initiated by an azobenzene derivative substituted with a 2‐bromoisobutyryl group (Azo‐Br) in the presence of CuCl/Me₆TREN in 1,4‐dioxane as a catalyst system. The molecular weights and their polydispersities of the resulting homopolymers (Azo‐PDMAEMA) were characterized by gel permeation chromatography (GPC). The homopolymers are soluble in aqueous solution and exhibit a lower critical solution temperature (LCST) that alternated reversibly in response to Ph and photoisomerization of the terminal azobenzene moiety. It was found that the LCST increased as pH decreased in the range of testing. Under UV light irradiation, the trans‐to‐cis photoisomerization of the azobenzene moiety resulted in a higher LCST, whereas it recovered under visible light irradiation. This kind of polymers should be particularly interesting for a variety of potential applications in some promising areas, such as drug controlled‐releasing carriers and intelligent materials because of the multistimuli responsive property. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2564–2570, 2010     

Dinuclear cyclopalladated azobenzene complexes: a comparative study on model compounds for organometallic liquid‐crystalline materials

The series of dinuclear 4,4′‐bis(hexyloxy)azobenzene, [H(Azo‐6)], cyclopalladated complexes of general formula [Azo‐6)Pd(µ‐X)]₂, (X = Cl, Br, I, N₃, SCN, OAc) and [Azo‐6)₂Pd₂(µ‐Ox)] (Ox = oxalate) have been synthesized and investigated for mesomorphism and spectroscopic properties. Single‐crystal X‐ray analysis of the dinuclear bromo‐ and iodo‐bridged complexes has been performed. The structural data, compared with those of the known homologous chloro compound, show that all the [Azo‐6)Pd(µ‐X)]₂)] (X = Cl, Br, I) molecules crystallize in the monoclinic space group P2₁/c and are isomorphous. They are arranged in slipped pairs with intermolecular non‐bonding Pd–Pd contacts ranging from 3.668(1) Å(X = Cl) to 3.758(3) Å(X = I). The different nature of the bridging group allows variation of the distance between the palladium atoms and the bond environment experienced by the metal centers. Thus, this comparative study reveals that the effectiveness of the bridging group in promoting thermotropic mesophases is greater for chloride, bromide, azide or oxalate than for iodide, thiocyanate or acetate. The greatest range of liquid‐crystal behavior was displayed by [Azo−6)₂Pd₂(µ−Ox)]. Remarkably, this compound is the first example of a metallomesogen containing the bridging oxalate group. The bimetallic complexes exhibit different absorption spectra (i.e. colors) depending, in general terms, on the nature of the bridge connecting the two cyclometalated [H(Azo‐6)] moieties, which can be varied so as to tune the optical properties. Blocking the azo group in the trans position results in several cases in weakly luminescent complexes, with luminescence efficiencies ϕ ≈10⁻⁴ and luminescence lifetimes of the order of nanoseconds. Using the data obtained from the 4,4′‐bis(hexyloxy)azoxybenzene [H(Azoxy‐6)] derivative, [Azoxy‐6)Pd(µ<?tf="ps2b61">‐Cl)]₂, from the mononuclear acetylacetonate (acac) complexes [(Azo‐6)Pd(acac)] and [(Azoxy‐6)Pd(acac)], and from the uncomplexed [H(Azo‐6)] and [H(Azoxy‐6)] ligands, the nature of the excited states relevant to the photophysical behavior are discussed. Copyright © 1999 John Wiley & Sons, Ltd.     

Effect of the ortho Modification of Azobenzene on the Photoregulatory Efficiency of DNA Hybridization and the Thermal Stability of its cis Form

We synthesized various azobenzenes methylated at their ortho positions with respect to the azo bond for more effective photoregulation of DNA hybridization. Photoregulatory efficiency, evaluated from the change of T_m (ΔT_m) induced by trans–cis isomerization, was significantly improved for all ortho‐modified azobenzenes compared with non‐modified azobenzene due to the more stabilized trans form and the more destabilized cis form. Among the synthesized azobenzenes, 4‐carboxy‐2′,6′ ‐ dimethylazobenzene ( 2′,6′‐Me‐Azo ), in which two ortho positions of the distal benzene ring with respect to carboxyl group were methylated, exhibited the largest ΔT_m, whereas the newly synthesized 2,6‐Me‐Azo (4‐carboxy‐2,6‐dimethylazobenzene), which possesses two methyl groups on the two ortho positions of the other benzene ring, showed moderate improvement of ΔT_m. Both NMR spectroscopic analysis and computer modeling revealed that the two methyl groups on 2′,6′‐Me‐Azo were located near the imino protons of adjacent base pairs; these stabilized the DNA duplex by stacking interactions in the trans form and destabilized the DNA duplex by steric hindrance in the cis form. In addition, the thermal stability of cis‐ 2′,6′‐Me‐Azo was also greatly improved, but not that of cis‐ 2,6‐Me‐Azo . Solvent effects on the half‐life of the cis form demonstrated that cis‐to‐trans isomerization of all the modified azobenzenes proceeded through an inversion route. Improved thermal stability of 2′,6′‐Me‐Azo but not 2,6‐Me‐Azo in the cis form was attributed to the retardation of the inversion process due to steric hindrance between lone pair electrons of the π orbital of the nitrogen atom and the methyl group on the distal benzene ring.     

Facile and Efficient Fabrication of Photoresponsive Microgels via Thiol–Michael Addition

A photoresponsive microgel is designed by the combination of a noncovalent assembly strategy with a covalent cross‐linking method. End‐functionalized poly(ethylene glycol) with azobenzene [(PEG‐(Azo)₂)] was mixed with acrylate‐modified β‐CD (β‐CD‐MAA) to form photoresponsive inclusion complex through host–guest interaction. The above photoresponsive complex was cross‐linked by thiol‐functionalized PEG (PEG‐dithiol) via Michael addition click reaction. The photoreversibility of resulted microgel was studied by TEM, UV–Vis spectroscopy, and ¹H NMR measurements. The characterization results indicated that the reversible size changes of the microgel could be achieved by alternative UV–Vis irradiations with good repeatability.     

trans/cis‐Isomerization of Fluorene‐Bridged Azo Chromophore with Significant Two‐Photon Absorbability at Near‐Infrared Wavelength

Azo‐containing materials have been proven to possess second‐order nonlinear optical (NLO) properties, but their third‐order NLO properties, which involves two‐photon absorption (2PA), has rarely been reported. In this study, we demonstrate a significant 2PA behavior of the novel azo chromophore incorporated with bilateral diphenylaminofluorenes (DPAFs) as a π framework. The electron‐donating DPAF moieties cause a redshifted π–π* absorption band centered at 470 nm, thus allowing efficient blue‐light‐induced trans‐to‐cis photoisomerization with a rate constant of 2.04×10^?1 min^?1 at the photostationary state (PSS). The open‐aperture Z‐scan technique that adopted a femtosecond (fs) pulse laser as excitation source shows an appreciably higher 2PA cross‐section for the fluorene‐derived azo chromophore than that for common azobenzene dyes at near‐infrared wavelength (λ_ex=800 nm). Furthermore, the fs 2PA response is quite uniform regardless of the molecular geometry. On the basis of the computational modeling, the intramolecular charge‐transfer (ICT) process from peripheral diphenylamines to the central azo group through a fluorene π bridge is crucial to this remarkable 2PA behavior.     

溶液中变性剂浓度对蛋白溶菌酶复性的影响

Based on three-state renaturation process of denatured proteins, an equation describing the effect of denaturant concentration on renaturation yield of denatured proteins was presented. By this equation, two parameters n（m1 -m2） and Ka can be obtained. The former indicates the difference in the number of denaturant molecules between the renaturation process of n number of refolding intermediates from refolding intermediate state to native state and their aggregate process from refolding intermediate state to aggregate state, the latter denotes the apparent aggregate equilibrium constant for protein molecules aggregated from native state to aggregate state, and from them, the characteristics of the renaturation process of denatured proteins in denaturant solution can be identified. This equation was tested by the renaturation processes of denatured egg white lysozyme in guanidine hydrochloride and urea solutions, with the results to show that when guanidine hydrochloride and urea concentrations were separately higher than 1.25 and 3.00 mol/L or separately lower than 1.00 and 3.00 mol/L, the refolding intermediates of egg white lysozymes were more easily aggregated to aggregate state or more easily renatured to native state, respectively. Under different initial total egg white lysozyme concentrations in urea solution, the refolding egg white lysozyme intermediates could be deduced to have a tendency to form a bimolecular intermediate aggregate, and this inference was further confirmed by their nonreducing SDS-PAGE and size exclusion chromatography.     

Dual‐Responsive Viscoelastic Lyotropic Liquid Crystal Fluids to Control the Diffusion of Hydrophilic and Hydrophobic Molecules

A smart lyotropic liquid crystal (LLC) system was prepared to control the diffusion rate of hydrophilic and hydrophobic molecules. The LLC system is composed of a nonionic surfactant (tetraethylene glycol monododecylether; C₁₂EO₄) and an anionic azobenzene surfactant (Azo‐surfactant). C₁₂EO₄ was the main component of the LLC system. The Azo‐surfactant, which can undergo photo‐isomerization, played the role of trigger in this system. LLC gels formed in a solution comprised of Azo‐surfactant (10 mm ) and C₁₂EO₄ (300 mm ). The LLC gels became broken when more Azo‐surfactant was added (e.g., up to 15 mm ) and the viscoelasticity was lost. Surprisingly, when we used UV light to irradiate the 300 mm C₁₂EO₄/15 mm Azo‐surfactant sample, the gel was recovered and high viscoelasticity was observed. However, under visible‐light irradiation, the gel became broken again. The gel formation could also be triggered by heating the sample. On heating the 300 mm C₁₂EO₄/15 mm Azo‐surfactant sample, the system thickened to a point at which typical gel behavior was registered. When the sample was cooled, the gel broke again. The LLC could be used for controlled release of hydrophilic and hydrophobic molecules, and could be considered as a versatile vehicle for the delivery of actives in systems of practical importance.     

Confinement Effect of Organic Nanotubes Toward Green Fluorescent Protein (GFP) Depending on the Inner Diameter Size

Transportation, release behavior, and stability of a green fluorescent protein (GFP, 3×4 nm) in self‐assembled organic nanotubes with three different inner diameters (10, 20, and 80 nm) have been studied in terms of novel nanocontainers. Selective immobilization of a fluorescent acceptor dye on the inner surface enabled us to not only visualize the transportation of GFP in the nanochannels but to also detect release of the encapsulated GFP to the bulk solution in real time, based on fluorescence resonance energy transfer (FRET). Obtained diffusion constants and release rates of GFP markedly decreased as the inner diameter of the nanotubes was decreased. An endo‐sensing procedure also clarified the dependence of the thermal and chemical stabilities of the GFP on the inner diameters. The GFP encapsulated in the 10 nm nanochannel showed strong resistance to heat and to a denaturant. On the other hand, the 20 nm nanochannel accelerated the denaturation of the encapsulated GFP compared with the rate of denaturation of the free GFP in bulk and the encapsulated GFP in the 80 nm nanochannels. The confinement effect based on rational fitting of the inner diameter to the size of GFP allowed us to store it stably and without denaturation under high temperatures and high denaturant concentrations.     

Far-red triplet sensitized Z-to-E photoswitching of azobenzene in bioplastics

We report the first example of direct far-red triplet sensitized molecular photoswitching in a condensed phase wherein a liquid azobenzene derivative (Azo1) co-assembled within a liquid surfactant–protein film undergoes triplet sensitized Z-to-E photoswitching upon far-red/red light excitation in air. The role of triplet sensitization in photoswitching has been confirmed by quenching of sensitizer phosphorescence by Z-Azo1 and temperature-dependent photoswitching experiments. Herein, we demonstrate new biosustainable fabrication designs to address key challenges in solid-state photoswitching, effectively mitigating chromophore aggregation and requirement of high energy excitations by dispersing the photoswitch in the trapped liquid inside the solid framework and by shifting the action spectrum from blue-green light (450–560 nm) to the far-red/red light (740/640 nm) region.

We report the first example of direct far-red endothermic triplet sensitized Z-to-E photoswitching of azobenzene derivative (Azo1) in a condensed phase of a liquid Azo1 co-assembled within a liquid surfactant-protein bioplastic film in air.     

Fluorine‐substituted azobenzene destabilizes polar form of optically switchable fulgimide unit in copolymer system

Fulgimide and various size and electronic nature of substituents on the terminal position of azobenzene in the pendant homo/copolymethacrylates were synthesized. Differential scanning calorimetry analysis indicates the homopolymer possessing C‐form fulgimide unit exhibited higher T_m than that of E‐form of the homopolymer and revealed C‐form is highly ordered. Thermal stability suggests azobenzene homopolymers with electron donating substituents have high thermal stability than electron withdrawing substituents. Polarized optical microscopy observation disclosed homopolymers viz., NI, CY, FL, ME , and T‐ME exhibited liquid crystalline mesophases between their T_m and T_i. Optical properties of homo/copolymers were investigated by UV–vis and fluorescence spectroscopy. UV–vis spectroscopy displayed C‐form fulgimide absorption in F‐co‐FL around 482 nm which is around 40 nm lesser than C‐form of substituted azobenzene copolymers. Similarly, fluorescence pattern of F‐co‐FL by UV irradiation exhibited emission intensity slowly increased to certain level then decreases with two new emissions at 430 and 480 nm attributed to terminal position of fluorine atom on azobenzene destabilizes polar form (C‐form) fulgimide unit in the copolymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1565–1578, 2010     

Gadolinium containing photochromic micelles as potential magnetic resonance imaging traceable drug carriers

Novel photochromic amphipathic molecules, KMR‐AZn (Gd‐DTPA‐AZCn), composed of hydrophilic Gd‐DTPA and hydrophobic alkylated azobenzene were prepared. In aqueous environment, KMR‐AZn indicated self‐assembly. The resulting aggregates were demonstrated to be able to include a hydrophobic drug substitute (hydrophobic fluorescent dye) into the internal core, and to release the included compound upon photoirradiation within 10 min through the influence of azobenzene photoisomerization. This micellar MRI contrast agent exhibited three‐ to four‐fold higher r₁ relaxivity (r₁ = 14.5–16.5 mm ^?1 s^?1, 0.47 T at 40°C) than the widely applied small molecule contrast agent Gd‐DTPA (Magnevist^®r₁ = 4.1 mm ^?1 s^?1, 0.47 T at 40°C). This dual functionality of encapsulated compound release and increased MR imaging contrast indicates that KMR‐AZn is a potential candidate for application as a lipid‐based MRI‐traceable drug carrier.     

C36填充单壁碳纳米管的结构和电子性质

The structures and electronic properties for C36 encapsulated in four single-wall armchair carbon nanotubes (C36@(n,n), n=6-9) were calculated using ab initio self-consistent field crystal orbital method based on density functional theory. The calculations show that the interwall spacing between the carbon nanotube and C36 plays an important role in the stabilities of resultant structures. The optimum interwall spacing is about 0.30 nm and the tubes can be considered as inert containers for the encapsulated C36. The Fermi levels and relative position of energy bands also have something to do with the interwall spacing. The shifts of Fermi level and C36-derived electron states modulate the electron properties of these structures. The extra electrons fill the bands of C36@(8,8) with the optimum interwall spacing almost in a rigid-band manner.     

Coordinatively saturated cyclometallated Pt(IV) azobenzene complexes: synthesis and mesomorphic behaviour

The mesomorphic 4,4-bis[4-n-octyloxybenzoyloxy]azobenzene dinuclear chloro-bridged cycloplatinated complex [(Azo)Pt(mu;-Cl)]2 (smectic C between 263 and 342 C) has been reacted with different chelating ligands, giving rise to a family of square-planar ortho-platinated derivatives, [(Azo)Pt(L)] (L = tropolonate, 8-hydroxyquinolinate and 1,1,1,5,5,5-hexafluoro2,4-pentanedionate). Thermotropic mesomorphism is preserved for these mononuclear complexes which exhibit at least a nematic mesophase and transition temperatures lower by over 100° C than that of the corresponding dimeric precursor. Oxidative addition to the Pt(II) [(Azo)Pt(L)] species of electrophilic substrates such as I₂ or CH₃I eventually led to the corresponding octahedral [(Azo)Pt(L)(I)(X)] products. The introduction of two further ligands leads to Pt(IV) derivatives showing smectic and nematic mesophases for all L ligands. For the hexacoordinated [(Azo)Pt(L)(I)(CH₃)] complexes it has been verified that the oxidative addition of methyl iodide is a thermally reversible process, indicating that these species have potential applications as switchable systems.     

Refolding of detergent‐denatured lysozyme using β‐cyclodextrin‐assisted ion exchange chromatography

Chromatography‐based protein refolding is widely used. Detergent is increasingly used for protein solubilization from inclusion bodies. Therefore, it is necessary to develop a refolding method for detergent‐denatured/solubilized proteins based on liquid chromatography. In the present work, sarkosyl‐denatured/dithiothreitol‐reduced lysozyme was used as a model, and a refolding method based on ion exchange chromatography, assisted by β‐cyclodextrin, was developed for refolding detergent‐denatured proteins. Many factors affecting the refolding, such as concentration of urea, concentration of β‐cyclodextrin, pH and flow rate of mobile phases, were investigated to optimize the refolding conditions for sarkosyl‐denatured lysozymes. The results showed that the sarkosyl‐denatured lysozyme could be successfully refolded using β‐cyclodextrin‐assisted ion exchange chromatography. Copyright © 2012 John Wiley & Sons, Ltd.     

Platinum and Palladium Nanotubes Based on Genetically Engineered Elastin–Mimetic Fusion Protein‐Fiber Templates: Synthesis and Application in Lithium‐O2 Batteries

The coupling of proteins with self‐assembly properties and proteins that are capable of recognizing and mineralizing specific inorganic species is a promising strategy for the synthesis of nanoscale materials with controllable morphology and functionality. Herein, GPG‐AG3 protein fibers with both of these properties were constructed and served as templates for the synthesis of Pt and Pd nanotubes. The protein fibers of assembled GPG‐AG3 were more than 10 μm long and had diameters of 20–50 nm. The as‐synthesized Pt and Pd nanotubes were composed of dense layers of ～3–5 nm Pt and Pd nanoparticles. When tested as cathodes in lithium‐O₂ batteries, the porous Pt nanotubes showed low charge potentials of 3.8 V, with round‐trip efficiencies of about 65 % at a current density of 100 mA g^?1.     

为光调控核酸结构设计合成偶氮分子开关

为了设计高效稳定的偶氮分子开关,本文合成了一系列偶氮分子,并对其性质进行了鉴定。实验结果表明,在偶氮苯分子的对位或间位引入诱导拉电子基团可以得到好的分子开关。然后,本文设计合成了3,3’-二甲羟基偶氮苯并将其引入核酸序列中,发现这个偶氮分子开关可以有效的可逆光调控发卡构型核酸的结构,并且它的顺式构型在生理温度下具有很好的热稳定性。     

trans–cis Photoisomerization of Azobenzene‐Conjugated Dithiolato‐Bipyridine Platinum(II) Complexes: Extension of Photoresponse to Longer Wavelengths and Photocontrollable Tristability

Azobenzene derivatives modified with dithiolato‐bipyridine platinum(II) complexes were synthesized, revealing their highly extended photoresponses to the long wavelength region as well as unique photocontrollable tristability. The absorptions of trans‐ 1 and trans‐ 2 with one azobenzene group on the dithiolene and bipyridine ligands, respectively, cover the range from 300 to 700 nm. These absorptions are ascribed, by means of time‐dependent (TD)DFT calculations, to transitions from dithiolene(π) to bipyridine(π*), namely, interligand charge transfer (CT), π–π*, and n–π* transitions of the azobenzene unit, and π–π* transitions of the bipyridine ligand. In addition, only trans‐ 1 shows distinctive electronic bands, assignable to transitions from the dithiolene(π) to azobenzene(π*), defined as intraligand CT. Complex 1 shows photoisomerization behavior opposite to that of azobenzene: trans‐to‐cis and cis‐to‐trans conversions proceed with 405 and 312 nm irradiation, which correspond to excitation with the intraligand CT, and π–π* bands of the azobenzene and bipyridine units, respectively. In contrast, complex 2 shows photoisomerization similar to that of azobenzene: trans‐to‐cis and cis‐to‐trans transformations occur with 365 and 405 nm irradiation, respectively. Irradiation at 578 nm, corresponding to excitation of the interligand CT transitions, results in cis‐to‐trans conversion of both 1 and 2 , which is the longest wavelength ever reported to effect the photoisomerization of the azobenzene group. The absorption and photochromism of 4 , which has azobenzene groups on both the dithiolato and bipyridine ligands, have characteristics quite similar to those of 1 and 2 , which furnishes 4 with photocontrollable tristability in a single molecule using light at 365, 405, and 578 nm. We also clarified that 1 and 2 have high photoisomerization efficiencies, and good thermal stability of the cis forms. Complexes 3 and 5 have almost the identical photoresponse to those of their positional isomers, complexes 2 and 4 .