Synthesis,Conformational Interconversion,and Photophysics of Tethered Porphyrin–Fullerene Dyads with Parachute Topology

The synthesis of a porphyrin–fullerene dyad with “parachute” topology is reported. To determine whether the dyad is “flexing” at room temperature, low‐temperature NMR experiments were used. Computational modeling has shown the low‐energy conformation of the dyad to be nonsymmetric. Although, ¹H NMR spectroscopy at room temperature is consistent with a molecule with C_2v symmetry, the spectrum changes on lowering the temperature consistent with “windshield wiper”‐like motion, in which the porphyrin moiety rotates from one side of the C₆₀ sphere to the other. Nanosecond and picosecond fluorescence lifetime experiments show two components contribute to the fluorescence decay, also consistent with the presence of more than one conformer.     

Supramolecular Tetrad Featuring Covalently Linked Bis(porphyrin)–Phthalocyanine Coordinated to Fullerene: Construction and Photochemical Studies

A multimodular donor–acceptor tetrad featuring a bis(zinc porphyrin)–(zinc phthalocyanine) ((ZnP–ZnP)–ZnPc) triad and bis‐pyridine‐functionalized fullerene was assembled by a “two‐point” binding strategy, and investigated as a charge‐separating photosynthetic antenna‐reaction center mimic. The spectral and computational studies suggested that the mode of binding of the bis‐pyridine‐functionalized fullerene involves either one of the zinc porphyrin and zinc phthalocyanine (Pc) entities of the triad or both zinc porphyrin entities leaving ZnPc unbound. The binding constant evaluated by constructing a Benesi–Hildebrand plot by using the optical data was found to be 1.17×10⁵ M ^?1, whereas a plot of “mole‐ratio” method revealed a 1:1 stoichiometry for the supramolecular tetrad. The mode of binding was further supported by differential pulse voltammetry studies, in which redox modulation of both zinc porphyrin and zinc phthalocyanine entities was observed. The geometry of the tetrad was deduced by B3LYP/6‐31G* optimization, whereas the energy levels for different photochemical events was established by using data from the optical absorption and emission, and electrochemical studies. Excitation of the zinc porphyrin entity of the triad and tetrad revealed ultrafast singlet–singlet energy transfer to the appended zinc phthalocyanine. The estimated rate of energy transfer (k_ENT) in the case of the triad was found to be 7.5×10¹¹ s^?1 in toluene and 6.3×10¹¹ s^?1 in o‐dichlorobenzene, respectively. As was predicted from the energy levels, photoinduced electron transfer from the energy‐transfer product, that is, singlet‐excited zinc phthalocyanine to fullerene was verified from the femtosecond‐transient spectral studies, both in o‐dichlorobenzene and toluene. Transient bands corresponding to ZnPc ^{? +} in the 850 nm range and C₆₀ ^{? ?} in the 1020 nm range were clearly observed. The rate of charge separation, k_CS, and rate of charge recombination, k_CR, for the (ZnP–ZnP)–ZnPc ^{? +}:Py₂C₆₀ ^{? ?} radical ion pair (from the time profile of 849 nm peak) were found to be 2.20×10¹¹ and 6.10×10⁸ s^?1 in toluene, and 6.82×10¹¹ and 1.20×10⁹ s^?1 in o‐dichlorobenzene, respectively. These results revealed efficient energy transfer followed by charge separation in the newly assembled supramolecular tetrad.     

Tetrathiafulvalene‐Fused Porphyrins via Quinoxaline Linkers: Symmetric and Asymmetric Donor–Acceptor Systems

A tetrathiafulvalene (TTF) donor is annulated to porphyrins (P) via quinoxaline linkers to form novel symmetric P–TTF–P triads 1 a – c and asymmetric P–TTF dyads 2 a , b in good yields. These planar and extended π‐conjugated molecules absorb light over a wide region of the UV/Vis spectrum as a result of additional charge‐transfer excitations within the donor–acceptor assemblies. Quantum‐chemical calculations elucidate the nature of the electronically excited states. The compounds are electrochemically amphoteric and primarily exhibit low oxidation potentials. Cyclic voltammetric and spectroelectrochemical studies allow differentiation between the TTF and porphyrin sites with respect to the multiple redox processes occurring within these molecular assemblies. Transient absorption measurements give insight into the excited‐state events and deliver corresponding kinetic data. Femtosecond transient absorption spectra in benzonitrile may suggest the occurrence of fast charge separation from TTF to porphyrin in dyads 2 a , b but not in triads 1 a – c . Clear evidence for a photoinduced and relatively long lived charge‐separated state (385 ps lifetime) is obtained for a supramolecular coordination compound built from the ZnP–TTF dyad and a pyridine‐functionalized C₆₀ acceptor unit. This specific excited state results in a (ZnP–TTF)^?+ ??? (C₆₀py)^?? state. The binding constant of Zn^II ??? py is evaluated by constructing a Benesi–Hildebrand plot based on fluorescence data. This plot yields a binding constant K of 7.20×10⁴ M ^?1, which is remarkably high for bonding of pyridine to ZnP.     

Strong Induced‐Fit Binding of Viologen and Pyridine Derivatives in Adjustable Porphyrin Cavities

The synthesis and binding properties of new porphyrin cage compounds consisting of a rigid diphenylglycoluril part, which is connected via flexible bis(ethyleneoxy) spacers to a (metallo)porphyrin “roof”, are reported. Binding of viologen guests and pyridine ligands in these porphyrin cages are accompanied by significant conformational reorganizations of the hosts. Despite these structural changes, association constants are still very high, revealing that not only receptors that bind guests according to a lock‐and‐key mechanism but also those that bind guests by an induced‐fit mechanism can exhibit strong binding.     

Tunable Self‐Assembly of Triazole‐Linked Porphyrin–Polymer Conjugates

The convergence of supramolecular chemistry and polymer science offers many powerful approaches for building functional nanostructures with well‐defined dynamic behaviour. Herein we report the efficient “click” synthesis and self‐assembly of AB₂‐ and AB₄‐type multitopic porphyrin–polymer conjugates (PPCs). PPCs were prepared using the copper(I)‐catalysed azide–alkyne cycloaddition (CuAAC) reaction, and consisted of linear polystyrene, poly(butyl acrylate), or poly(tert‐butyl acrylate) arms attached to a zinc(II) porphyrin core via triazole linkages. We exploit the presence of the triazole groups obtained from CuAAC coupling to direct the self‐assembly of the PPCs into short oligomers (2–6 units in length) via intermolecular porphyrinatozinc–triazole coordination. By altering the length and grafting density of the polymer arms, we demonstrate that the association constant of the porphyrinatozinc–triazole complex can be systematically tuned over two orders of magnitude. Self‐assembly of the PPCs also resulted in a 6 K increase in the glass transition temperature of the bulk material compared to a non‐assembling PPC. The modular synthesis and tunable self‐assembly of the triazole‐linked PPCs thus represents a powerful supramolecular platform for building functional nanostructured materials.     

Conformational Re‐engineering of Porphyrins as Receptors with Switchable N−H⋅⋅⋅X‐Type Binding Modes

The selectivity and functional variability of porphyrin cofactors are typically based on substrate binding of metalloporphyrins wherein the pyrrole nitrogen units only serve to chelate the metal ions. Yet, using the porphyrin inner core system for other functions is possible through conformational engineering. As a first step towards porphyrin “enzyme‐like” active centers, a structural and spectroscopic study of substrate binding to the inner core porphyrin system shows that a highly saddle‐distorted porphyrin with peripheral amino receptor groups ( 1 , 2,3,7,8,12,13,17,18‐octaethyl‐5,10,15,20‐tetrakis(2‐aminophenyl)porphyrin) coordinates analytes in a switchable manner dependent on the acidity of the solution. The supramolecular ensemble exhibits exceptionally high affinity to and selectivity for the pyrophosphate anion (2.26±0.021)×10⁹ m ^?1. ¹H NMR spectroscopic studies provided insight into the likely mode of binding and the characterization of atropisomers, all four of which were also studied by X‐ray crystallography.     

Synthesis and properties of hybrid porphyrin tapes

Hybrid porphyrin tapes 3 and 4 , consisting of a mixture of 3,5‐di‐tert‐butylphenyl‐substituted donor‐type Zn^II–porphyrins and pentafluorophenyl‐substituted acceptor‐type Zn^II–porphyrins, were prepared by a synthetic route involving cross‐condensation reaction of a Ni^II–porphyrinyldipyrromethane and pentafluorophenyldipyrromethane with pentafluorobenzaldehyde followed by appropriate demetalation, remetalation, and oxidative ring‐closure reaction. The Ni^II‐substituted porphyrin tapes 5 (Ni‐Zn‐Ni) and 6 (Ni‐H₂‐Ni) were also prepared through similar routes. The hybrid porphyrin tapes 3 and 4 are more soluble and more stable than normal porphyrin tapes 1 and 2 consisting of only donor‐type Zn^II–porphyrins. The solid‐state and crystal packing structures of 3 , 4 , and 5 were elucidated by single‐crystal X‐ray diffraction analysis. Singly meso–meso‐linked hybrid porphyrin arrays 12 and 14 exhibit redox potentials that roughly correspond to each constituent porphyrin segments, while the redox potentials of the hybrid porphyrin tapes 3 and 4 are positively shifted as a whole. The two‐photon absorption (TPA) values of 1–6 were measured by using a wavelength‐scanning open aperture Z‐scan method and found to be 1900, 21 000, 2200, 27 000, 24 000, and 26 000 GM, respectively. These results illustrate an important effect of elongation of π‐electron conjugation for the enhancement of TPA values. The hybrid porphyrin tapes show slightly larger TPA values than the parent ones.     

Synthesis and properties of a new (octaethylporphyrinato)-manganese(III)–pyridinyl-substituted pyrrolidinofullerene dyad

The formation of a porphyrin–fullerene dyad from 2′-(pyridin-4-yl)-5′-(pyridin-2-yl)-1′-(pyridin-3-ylmethyl)-2′,5′-dihydro-1′H-pyrrolo[3′,4′: 1,9](C₆₀-I_h)[5,6]fullerene and (2,3,7,8,12,13,17,18-octaethylporphyrinato) manganese(III) with axial chloride ligand has been studied on a quantitative level with the goal of obtaining supramolecules possessing biological activity. Preliminarily, the reaction of manganese(III) porphyrin with pyridine has been studied. The donor–acceptor dyads are formed either instantaneously and reversibly (pyridine) or slowly and irreversibly (substituted fullerene). In both cases, the reaction is a one-step process for which thermodynamic and kinetic parameters have been determined. The results can be used to optimize conditions for the synthesis of porphyrin–fullerene dyads. The obtained dyads have been characterized by spectral data and stability constants.     

A High‐Energy Charge‐Separated State of 1.70 eV from a High‐Potential Donor–Acceptor Dyad: A Catalyst for Energy‐Demanding Photochemical Reactions

A high potential donor–acceptor dyad composed of zinc porphyrin bearing three meso‐pentafluorophenyl substituents covalently linked to C₆₀, as a novel dyad capable of generating charge‐separated states of high energy (potential) has been developed. The calculated energy of the charge‐separated state was found to be 1.70 eV, the highest reported for a covalently linked porphyrin–fullerene dyad. Intramolecular photoinduced electron transfer leading to charge‐separated states of appreciable lifetimes in polar and nonpolar solvents has been established from studies involving femto‐ to nanosecond transient absorption techniques. The high energy stored in the form of charge‐separated states along with its persistence of about 50–60 ns makes this dyad a potential electron‐transporting catalyst to carry out energy‐demanding photochemical reactions. This type of high‐energy harvesting dyad is expected to open new research in the areas of artificial photosynthesis especially producing energy (potential) demanding light‐to‐fuel products.     

A V‐Shaped Polyaromatic Amphiphile: Solubilization of Various Nanocarbons in Water and Enhanced Photostability

Nanocarbons are synthetic carbon‐rich compounds with polyaromatic frameworks that have lately attracted attention as emerging functional materials. However, their extreme hydrophobicity and aggregation peculiarity, besides their shape and size diversities, precluded their study in solution, especially in “green” water. More convenient and general solubilizing methods of nanocarbon frameworks are required by using non‐covalent supramolecular interactions. Here we report a protocol for solubilizing a wide range of nanocarbons, that is, fullerenes (C₆₀, C₇₀, C₈₄, and C₁₂₀), polyarenes (tetracene, pentacene, perylene, coronene, and hexabenzocoronene), and carbon nanotubes (single‐walled and multi‐walled CNTs), in water through manual grinding with V‐shaped polyaromatic amphiphiles. The obtained aqueous nanocomposites are composed of nanocarbons encircled by the polyaromatic frameworks of the amphiphiles through multiple aromatic–aromatic interactions. Notably, the encapsulated photosensitive nanocarbons, such as tetracene, pentacene, and fullerene dimer, exhibit unusual stability toward UV/Vis light.     

The Contrasting Recognition Behavior of β‐Cyclodextrin and Its Sulfobutylether Derivative towards 4′,6‐Diamidino‐2‐phenylindole

The noncovalent interactions between 4′, 6‐diamidino‐2‐phenylindole (DAPI) and sulfobutylether β‐cyclodextrin (SBE₇β‐CD) are evaluated by using photochemical measurements and compared with that of native β‐CD. Contrasting recognition behavior and intriguing modulations in the photochemical behavior of DAPI were observed. In particular, a large enhancement in the fluorescence emission and excited‐state lifetime were seen upon binding to SBE₇β‐CD, with the SBE₇β‐CD inclusion complex being approximately 1000 times stronger than that of β‐CD. The ensuing fluorescence “turn on” was demonstrated to be responsive to chemical stimuli, such as metal ions and adamantylanmine (AD). Upon addition of Ca²⁺/AD, nearly quantitative dissociation of the complex was established to regenerate the free dye and result in fluorescence “turn off”. The SO₃^? groups are believed to be critical for the strong and selective binding of the chromophore and the stimuli‐responsive tuning. This is as an important design criterion for the optimization of host–guest properties through supramolecular association, which is relevant for drug‐delivery applications.     

Supramolecular Nanoassemblies of an Amphiphilic Porphyrin–Cyclodextrin Conjugate and Their Morphological Transition from Vesicle to Network

An amphiphilic compound, 5‐(4′‐dodecyloxyphenyl)‐10,15,20‐tri(permethyl‐β‐CD)‐modified Zn^II–porphyrin ( 1 ; β‐CD=β‐cyclodextrin), was synthesized by means of the click reaction of an alkylated Zn–porphyrin derivative with 6‐deoxy‐6‐azidopermethyl‐β‐CD. The complexation between 1 and tetrasodium tetraphenylporphyrintetrasulfonate ( 5 ) with different molar ratios led to the formation of two distinctly different nanoarchitectures, which were proven to be vesicle and network aggregates, respectively, by using dynamic light scattering, scanning electron microscopy, transmission electron microscopy, and atomic force microscopy. On the basis of the results of the time‐dependent TEM studies, fluorescence, and NMR spectroscopic measurements, we have determined that the mechanism of the morphology transition from vesicles to networks is controlled by the stepwise complexation of 1 with 5 . Furthermore, these supramolecular nanoarchitectures show the controlled‐ release property of doxorubicin as potential candidates for drug delivery.     

Iron (III)‐porphyrin Complex FeTSPP as an efficient catalyst for synthesis of tetrazole derivatives via [2 + 3]cycloaddition reaction in aqueous medium

The metal complex (5,10,15,20‐tetrakis‐(4‐sulfonatophenyl)‐porphyrin‐iron (III) chloride (FeTSPP) was new employed in an environmentally benign protocol as an efficient catalyst for a “click” chemistry approach for the synthesis of tetrazole and guanindinyltetrazole derivatives via [2 + 3] cycloaddition reaction of nitriles and azide derivatives in aqueous medium. The synthesized compounds were obtained in excellent yield, short reaction times and a recoverable catalyst.     

Catalytic Three‐Component Machinery: Control of Catalytic Activity by Machine Speed

Three supramolecular slider‐on‐deck systems DS1 – DS3 were obtained as two‐component aggregates from the sliders S1 – S3 and deck D with its three zinc porphyrin (ZnPor) binding sites. The binding of the two‐footed slider to the deck varies with the donor qualities of and the steric hindrance at the pyridine/pyrimidine (pyr) feet, and was effected by two N_pyr→ZnPor interactions. Accordingly, the sliders move over the three zinc porphyrins in the deck at different speeds, namely with 32.2, 220, and 440 kHz at room temperature. The addition of N‐methylpyrrolidine as an organocatalyst to DS1 – DS3 generates catalytic three‐component machineries. By using a conjugate addition as a probe reaction, we observed a correlation between the operating speed of the slider‐on‐deck systems and the yields of the catalytic reaction. As the thermodynamic binding of the slider decreases, both the frequency of the sliding motion and the yield of the catalytic reaction increase.     

Effect of pyridine on the reaction of “spanned” zinc porphyrin with organic peroxides

The reaction of “spanned” zinc porphyrin with organic peroxides in the presence of pyridine at 298 K was studied. The kinetic characteristics of the reaction were obtained. The presence of pyridine favors the formation of the zinc chlorin complex. The nature of the nitrogen base affects the character and rate of the reactions of the zinc porphyrin with peroxide. The structures of the sterically strained metal porphyrin and of the chlorin complex formed in the reaction were optimized by PM3 calculations. As follows from the geometric structure of the macrocyclic compounds, the deformations of the macroring enhance in going from zinc porphyrin to zinc chlorin.     

Charge‐Transfer State and Large First Hyperpolarizability Constant in a Highly Electronically Coupled Zinc and Gold Porphyrin Dyad

We report the synthesis and the characterizations of a novel dyad composed of a zinc porphyrin (ZnP) linked to a gold porphyrin (AuP) through an ethynyl spacer. The UV/Vis absorption spectrum and the electrochemical properties clearly reveal that this dyad exhibits a strong electronic coupling in the ground state as evidenced by shifted redox potentials and the appearance of an intense charge‐transfer band localized at λ=739 nm in dichloromethane. A spectroelectrochemical study of the dyad along with the parent homometallic system (i.e., ZnP–ZnP and AuP–AuP) was undertaken to determine the spectra of the reduced and oxidized porphyrin units. Femtosecond transient absorption spectroscopic analysis showed that the photoexcitation of the heterometallic dyad leads to an ultrafast formation of a charge‐separated state (⁺ZnP–AuP^.) that displays a particularly long lifetime (τ=4 ns in toluene) for such a short separation distance. The molecular orbitals of the dyad were determined by DFT quantum‐chemical calculations. This theoretical study confirms that the observed intense band at λ=739 nm corresponds to an interporphyrin charge‐transfer transition from the HOMO orbital localized on the zinc porphyrin to LUMO orbitals localized on the gold porphyrin. Finally, a Hyper–Rayleigh scattering study shows that the dyad possesses a large first molecular hyperpolarizability coefficient (β=2100×10^?30 esu at λ=1064 nm), thus highlighting the valuable nonlinear optical properties of this new type of push–pull porphyrin system.     

Insight into the Molecular Mechanism for Enhanced Longevity of Supramolecular Vesicular Photocatalysts

Supramolecular self-assembly is a promising strategy for stabilizing the photo-sensitive components in photocatalysis. However, the underlying correlation between the enhanced photostability and supramolecular structure at the molecular level has not yet been fully understood. Herein, we develop a biomimetic vesicular membrane-based polyporphyrin photocatalyst exhibiting excellent photocatalytic stability with at least activity time of 240 h in hydrogen generation. Time-domain ab initio modelling together with transient absorption spectroscopy, visual frontier orbitals and Gibbs free energy calculation disclose that the ordered aggregation of porphyrin units in the vesicle membrane facilitates “hot” electron relaxation and the rapid dissipation of photo-generated charges, thereby contributing to the longevity. This work deepens the molecular-level understanding on photostability and photocatalytic mechanism of supramolecular photocatalysts.     

Mono‐functionalized Heteroporphyrin Building Blocks and Unsymmetrical Covalent and Non‐covalent Porphyrin Dyads

Heteroporphyrins resulted from the replacement of one or two pyrrolic nitrogens with other hetero atoms such as O, S, Se and Te possess very interesting and distinct properties compared to tetrapyrrolic porphyrins. Specially, the singlet state energy levels can be fine tuned with suitable modification of porphyrin core by substituting pyrrolic “N” with other hetero atoms such as “O” and “S”. In this review, we describe our synthetic approaches for the synthesis of various mono‐functionalized heteroporphyrin building blocks and their use in the synthesis of several covalently and non‐covalently linked unsymmetrical porphyrin dyads containing two different porphyrin sub‐units. The photophysical studies are also described to show the possibility of singlet‐singlet energy transfer from one porphyrin sub‐unit to another in these unsymmetrical porphyrin dyads.     

Design and Sensing Properties of a Self‐Assembled Supramolecular Oligomer

Supramolecular polymers are a class of macromolecules stabilized by weak non‐covalent interactions. These self‐assembled aggregates typically undergo stimuli‐induced reversible assembly and disassembly. They thus hold great promise as so‐called functional materials. In this work, we present the design, synthesis, and responsive behavior of a short supramolecular oligomeric system based on two hetero‐complementary subunits. These “monomers” consist of a tetrathiafulvalene‐functionalized calix[4]pyrrole (TTF‐C[4]P) and a glycol diester‐linked bis‐2,5,7‐trinitrodicyanomethylenefluorene‐4‐carboxylate (TNDCF), respectively. We show that when mixed in organic solvents, such as CHCl₃, CH₂ClCH₂Cl, and methylcyclohexane, supramolecular aggregation takes place to produce short oligomers stabilized by hydrogen bonding and donor–acceptor charge‐transfer (CT) interactions. The self‐associated materials were characterized by ¹H NMR and UV/Vis/NIR absorption spectroscopy, as well as by concentration‐ and temperature‐dependent absorption spectroscopy and dynamic light scattering (DLS) analyses of both the monomeric and oligomerized species. The self‐associated system produced from TTF‐C[4]P and TNDCF exhibits a concentration‐dependent aggregation behavior typical of supramolecular polymers. Further support for the proposed self‐assembly came from theoretical calculations. The fluorescence emitting properties of TNDCF are quenched under conditions that promote the formation of supramolecular aggregates containing TTF‐C[4]P and TNDCF. This quenching effect has been utilized as a probe for the detection of substrates in the form of anions (i.e., chloride) and nitroaromatic explosives (i.e., 1,3,5‐trinitrobenzene). Specifically, the addition of these substrates to mixtures of TTF‐C[4]P and TNDCF produced a fluorescence “turn‐on” response.     

Energy transfer followed by electron transfer in a supramolecular triad composed of boron dipyrrin, zinc porphyrin, and fullerene: a model for the photosynthetic antenna-reaction center complex

The first example of a working model of the photosynthetic antenna-reaction center complex, constructed via self-assembled supramolecular methodology, is reported. For this, a supramolecular triad is assembled by axially coordinating imidazole-appended fulleropyrrolidine to the zinc center of a covalently linked zinc porphyrin-boron dipyrrin dyad. Selective excitation of the boron dipyrrin moiety in the boron dipyrrin-zinc porphyrin dyad resulted in efficient energy transfer (k(ENT)(singlet) = 9.2 x 10(9) s(-)(1); Phi(ENT)(singlet) = 0.83) creating singlet excited zinc porphyrin. Upon forming the supramolecular triad, the excited zinc porphyrin resulted in efficient electron transfer to the coordinated fullerenes, resulting in a charge-separated state (k(cs)(singlet) = 4.7 x 10(9) s(-)(1); Phi(CS)(singlet) = 0.9). The observed energy transfer followed by electron transfer in the present supramolecular triad mimics the events of natural photosynthesis. Here, the boron dipyrrin acts as antenna chlorophyll that absorbs light energy and transports spatially to the photosynthetic reaction center, while the electron transfer from the excited zinc porphyrin to fullerene mimics the primary events of the reaction center where conversion of the electronic excitation energy to chemical energy in the form of charge separation takes place. The important feature of the present model system is its relative "simplicity" because of the utilized supramolecular approach to mimic rather complex "combined antenna-reaction center" events of photosynthesis.