Exploring the structural landscape of 2‐(thiophen‐2‐yl)‐1,3‐benzothiazole: high‐Z′ packing polymorphism and cocrystallization with calix[4]tube

We report here for the first time a cocrystal of the so‐called neutral calix[4]tube, which is two tail‐to‐tail‐arranged and partially deprotonated tetrakis(carboxymethoxy)calix[4]arenes, including three sodium ions, with 2‐(thiophen‐2‐yl)‐1,3‐benzothiazole, namely trisodium bis(carboxymethoxy)bis(carboxylatomethoxy)calix[4]arene tris(carboxymethoxy)(carboxylatomethoxy)calix[4]arene–2‐(thiophen‐2‐yl)‐1,3‐benzothiazole–dimethyl sulfoxide–water (1/1/2/2), 3Na⁺·C₃₆H₃₀O₁₂^2?·C₃₆H₃₁O₁₂^?·C₁₁H₇NS₂·2C₂H₆OS·2H₂O, which provides a new approach into the host–guest chemistry of inclusion complexes. Three packing polymorphs of the same benzothiazole with high Z′ (one with Z′ = 8 and two with Z′ = 4) were also discovered in the course of our desired cocrystallization. The inspection of these polymorphs and a previously known polymorph with Z′ = 2 revealed that Z′ increases as the strength of intermolecular contacts decreases. Also, these results expand the frontier of invoking calixarenes as a host for nonsolvent small molecules, besides providing knowledge on the rare formation of high‐Z′ packing polymorphs of simple molecules, such as the target benzothiazole.     

An experimental and computational approach to pH‐dependent self‐aggregation of poly(2‐isopropyl‐2‐oxazoline)

Besides temperature, self‐aggregation of poly(2‐isopropyl‐2‐oxazoline) (PIPOX) can also be triggered via pH in aqueous solution (25 °C, pH > 5). Lowest energy structures and interaction energies of PIPOX with H₃O⁺, OH^?, and H₂O were calculated by DFT methods showed that, in addition to their ability to protonate PIPOX, H₃O⁺ ions had strong interaction with both water and PIPOX in acidic conditions. H₃O⁺ ions acted as compatibilizer between PIPOX and water and increased the solubility of PIPOX. OH^? ions were found to have stronger interaction with water compared to PIPOX resulting in desorption of water molecules from PIPOX phase and decreased solubility, leading to enhanced hydrophobic interactions among isopropyl groups of PIPOX and formation of aggregates at high pH. Results concerning the effect of end‐groups on aggregate size were in good agreement with statistical mechanics calculations. Moreover, the effect of polymer concentration on the aggregate size was examined. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 210–221     

Energetic Salts Based on Monoanions of N,N‐Bis(1H‐tetrazol‐5‐yl)amine and 5,5′‐Bis(tetrazole)

High‐density energetic salts that contain nitrogen‐rich cations and the 5‐(tetrazol‐5‐ylamino)tetrazolate (HBTA^?) or the 5‐(tetrazol‐5‐yl)tetrazolate (HBT^?) anion were readily synthesized by the metathesis reactions of sulfate salts with barium compounds, such as bis[5‐(tetrazol‐5‐ylamino)tetrazolate] (Ba(HBTA)₂), barium iminobis(5‐tetrazolate) (BaBTA), or barium 5,5′‐bis(tetrazolate) (BaBT) in aqueous solution. All salts were fully characterized by IR spectroscopy, multinuclear (¹H, ¹³C, ¹⁵N) NMR spectroscopy, elemental analyses, density, differential scanning calorimetry (DSC), and impact sensitivity. Ba(HBTA)₂ ? 4 H₂O crystallizes in the triclinic space group P$\bar 1$ , as determined by single‐crystal X‐ray diffraction, with a density of 2.177 g cm^?3. The densities of the other organic energetic salts range between 1.55 and 1.75 g cm^?3 as measured by a gas pycnometer. The detonation pressure (P) values calculated for these salts range from 19.4 to 33.6 GPa, and the detonation velocities (ν_D) range from 7677 to 9487 m s^?1, which make them competitive energetic materials. Solid‐state ¹³C NMR spectroscopy was used as an effective technique to determine the structure of the products that were obtained from the metathesis reactions of biguanidinium sulfate with barium iminobis(5‐tetrazolate) (BaBTA). Thus, the structure was determined as an HBTA salt by the comparison of its solid‐state ¹³C NMR spectroscopy with those of ammonium 5‐(tetrazol‐5‐ylamino)tetrazolate (AHBTA) and diammonium iminobis(5‐tetrazolate) (A₂BTA).     

Exceptionally high molecular weight linear polyethylene by using N,N,N′‐Co catalysts appended with a N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group

The bis(arylimino)pyridines, 2‐[CMeN{2,6‐{(4‐FC₆H₄)₂CH}₂–4‐NO₂}]‐6‐(CMeNAr)C₅H₃N (Ar = 2,6‐Me₂C₆H₃ L1 , 2,6‐Et₂C₆H₃ L2 , 2,6‐i‐Pr₂C₆H₃ L3 , 2,4,6‐Me₃C₆H₂ L4 , 2,6‐Et₂–4‐MeC₆H₂ L5 ), each containing one N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group, have been synthesized by two successive condensation reactions from 2,6‐diacetylpyridine. Their subsequent treatment with anhydrous cobalt (II) chloride gave the corresponding N,N,N′‐CoCl₂ chelates, Co1 – Co5 , in excellent yield. All five complexes have been characterized by ¹H/¹⁹F NMR and IR spectroscopy as well as by elemental analysis. In addition, the molecular structures of Co1 and Co3 have been determined and help to emphasize the differences in steric properties imposed by the inequivalent N‐aryl groups; distorted square pyramidal geometries are adopted by each complex. Upon activation with either methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), precatalyts Co1 – Co5 collectively exhibited very high activities for ethylene polymerization with 2,6‐dimethyl‐substituted Co1 the most active (up to 1.1 × 10⁷ g (PE) mol^?1 (Co) h^?1); the MAO systems were generally more productive. Linear polyethylenes of exceptionally high molecular weight (M_w up to 1.3 × 10⁶ g mol^?1) were obtained in all cases with the range in dispersities exhibited using MAO as co‐catalyst noticeably narrower than with MMAO [M_w/M_n: 3.55–4.77 ( Co1 – Co5 /MAO) vs. 2.85–12.85 ( Co1 – Co5 /MMAO)]. Significantly, the molecular weights of the polymers generated using this class of cobalt catalyst are higher than any literature values reported to date using related N,N,N‐bis (arylimino)pyridine‐cobalt catalysts.     

Analysis of ToF‐SIMS spectra of poly(2‐vinylpyridine) and poly(4‐vinylpyridine) with density functional theory calculations

The time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) positive and negative ion spectra of poly(2‐vinylpyridine) (P2VP) and poly(4‐vinylpyridine) (P4VP) were analyzed using density functional theory calculations. Most of the ions from these structural isomers shared the same accurate mass, but had different relative abundance. This could be attributed to the fact that from a thermodynamics perspective, the disparity in the molecular structures can affect the ion stability if we assume that they shared the same mechanistic pathway of formation with similar reaction kinetics. The molecular structures of these ions were assigned, and their stability was evaluated based on calculations using the Kohn‐Sham density functional theory with Becke's 3‐parameter Lee‐Yang‐Parr exchange‐correlation functional and a correlation‐consistent, polarized, valence, double‐zeta basis set for cations and the same basis set with a triple‐zeta for anions. The computational results agreed with the experimental observations that the nitrogen‐containing cations such as C₅H₄N⁺ (m/z = 78), C₈H₇N^+· (m/z = 117), C₈H₈N⁺ (m/z = 118), C₉H₈N⁺ (m/z = 130), C₁₃H₁₁N₂⁺ (m/z = 195), C₁₄H₁₃N₂⁺ (m/z = 209), C₁₅H₁₅N₂⁺ (m/z = 223), and C₂₁H₂₂N₃⁺ (m/z = 316) ions were more favorably formed in P2VP than in P4VP due to higher ion stability because the calculated total energies of these cations were more negative when the nitrogen was situated at the ortho position. Nevertheless, our assumption was invalid in the formation of positive ions such as C₆H₇N⁺˙ (m/z = 93) and C₈H₁₀N⁺ (m/z = 120). Their formation did not necessarily depend on the ion stability. Instead, the transition state chemistry and the matrix effect both played a role. In the negative ion spectra, we found that nitrogen‐containing anions such as C₅H₄N^? (m/z = 78), C₆H₆N^? (m/z = 92), C₇H₆N^? (m/z = 104), C₈H₆N^? (m/z = 116), C₉H₁₀N^? (m/z = 132), C₁₃H₁₁N₂^? (m/z = 195), and C₁₄H₁₃N₂^? (m/z = 209) ions were more favorably formed in P4VP, which is in line with our computational results without exception. We speculate that whether anions would form from P2VP and P4VP is more dependent on the stability of the ions.     

Approaching the Kinetic Inertness of Macrocyclic Gadolinium(III)‐Based MRI Contrast Agents with Highly Rigid Open‐Chain Derivatives

A highly rigid open‐chain octadentate ligand (H₄cddadpa) containing a diaminocylohexane unit to replace the ethylenediamine bridge of 6,6′‐[(ethane‐1,2 diylbis{(carboxymethyl)azanediyl})bis(methylene)]dipicolinic acid (H₄octapa) was synthesized. This structural modification improves the thermodynamic stability of the Gd³⁺ complex slightly (log K_GdL=20.68 vs. 20.23 for [Gd(octapa)]^?) while other MRI‐relevant parameters remain unaffected (one coordinated water molecule; relaxivity r₁=5.73 mm ^?1 s^?1 at 20 MHz and 295 K). Kinetic inertness is improved by the rigidifying effect of the diaminocylohexane unit in the ligand skeleton (half‐life of dissociation for physiological conditions is 6 orders of magnitude higher for [Gd(cddadpa)]^? (t_1/2=1.49×10⁵ h) than for [Gd(octapa)]^?. The kinetic inertness of this novel chelate is superior by 2–3 orders of magnitude compared to non‐macrocyclic MRI contrast agents approved for clinical use.     

Hydrogen bonding and π–π interactions in the cocrystal salt [Fe(bpe)2(H2O)4](TCEP)2·2(bpe) [bpe is trans‐1,2‐bis(pyridin‐4‐yl)ethene and TCEP is 1,1,3,3‐tetracyano‐2‐ethoxypropenide]

The cocrystal salt tetraaquabis[trans‐1,2‐bis(pyridin‐4‐yl)ethene‐κN]iron(II) bis(1,1,3,3‐tetracyano‐2‐ethoxypropenide)–trans‐1,2‐bis(pyridin‐4‐yl)ethene (1/2), [Fe(C₁₂H₁₀N₂)₂(H₂O)₄](C₉H₅N₄O)₂·2C₁₂H₁₀N₂, is a rare example of a mononuclear Fe^II compound with trans‐1,2‐bis(pyridin‐4‐yl)ethane (bpe) ligands. The complex cation resides on a crystallographically imposed inversion center and exhibits a tetragonally distorted octahedral coordination geometry. Both the symmetry‐independent bpe ligand and the cocrystallized bpe molecule are essentially planar. The 1,1,3,3‐tetracyano‐2‐ethoxypropenide counter‐ion is nonplanar and the bond lengths are consistant with significant electron delocalization. The extended structure exhibits an extensive O—H…N hydrogen‐bonding network with layers of complex cations joined by the cocrystallized bpe. Both the coordinated and the cocrystallized bpe are involved in π–π interactions. Hirshfeld and fingerprint plots reveal the important intermolecular interactions. Density functional theory was used to estimate the strengths of the hydrogen‐bonding and π–π interactions, and suggest that the O—H…N hydrogen bonds enhance the strength of the π‐interactions by increasing the polarization of the pyridine rings.     

Highly branched and high‐molecular‐weight polyethylenes produced by 1‐[2,6‐bis(bis(4‐fluorophenyl)methyl)‐4‐MeOC6H2N]‐2‐aryliminoacenaphthylnickel(II) halides

A series of unsymmetrical 1‐[2,6‐bis(bis(4‐fluorophenyl)methyl)‐4‐MeOC₆H₂N]‐2‐aryliminoacenaphthene‐nickel(II) halides has been synthesized and fully characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance (¹H NMR), ¹³C NMR, and ¹⁹F NMR spectroscopy as well as elemental analysis. The structures of Ni1 and Ni6 have been confirmed by the single‐crystal X‐ray diffraction. On activation with cocatalysts either ethylaluminum sesquichloride or methylaluminoxane, all the title nickel complexes display high activities toward ethylene polymerization up to 16.14 × 10⁶ g polyethylene (PE) mol^?1(Ni) h^?1 at 30 °C, affording PEs with both high branches (up to 103 branches/1000 carbons) and molecular weight (1.12 × 10⁶ g mol^?1) as well as narrow molecular weight distribution. High branching content of PE can be confirmed by high temperature ¹³C NMR spectroscopy and differential scanning calorimetry. In addition, the PE exhibited remarkable property of thermoplastic elastomers (TPEs) with high tensile strength (σ_b = 21.7 MPa) and elongation at break (ε_b = 937%) as well as elastic recovery (up to 85%), indicating a better alternative to commercial TPEs. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 130–145     

Chelation versus Binucleation: Metal Complex Formation with the Hexadentate all‐cis‐N1,N2‐Bis(2,4,6‐trihydroxy‐3,5‐diaminocyclohexyl)ethane‐1,2‐diamine

The hexadentate ligand all‐cis‐N¹,N²‐bis(2,4,6‐trihydroxy‐3,5‐diaminocyclohexyl)ethane‐1,2‐diamine (L^e) was synthesized in five steps with an overall yield of 39 % by using [Ni(taci)₂]SO₄?4 H₂O as starting material (taci=1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol). Crystal structures of [Na_0.5(H₆L^e)](BiCl₆)₂Cl_0.5?4 H₂O ( 1 ), [Ni(L^e)]‐ Cl₂?5 H₂O ( 2 ), [Cu(L^e)](ClO₄)₂?H₂O ( 3 ), [Zn(L^e)]CO₃?7 H₂O ( 4 ), [Co(L^e)](ClO₄)₃ ( 5 c ), and [Ga(H_?2L^e)]‐ NO₃?2 H₂O ( 6 ) are reported. The Na complex 1 exhibited a chain structure with the Na⁺ cations bonded to three hydroxy groups of one taci subunit of the fully protonated H₆(L^e)⁶⁺ ligand. In 2 , 3 , 4 , and 5 c , a mononuclear hexaamine coordination was found. In the Ga complex 6 , a mononuclear hexadentate coordination was also observed, but the metal binding occurred through four amino groups and two alkoxo groups of the doubly deprotonated H_?2(L^e)^2?. The steric strain within the molecular framework of various M(L^e) isomers was analyzed by means of molecular mechanics calculations. The formation of complexes of L^e with Mn^II, Cu^II, Zn^II, and Cd^II was investigated in aqueous solution by using potentiometric and spectrophotometric titration experiments. Extended equilibrium systems comprising a large number of species were observed, such as [M(L^e)]²⁺, protonated complexes [MH_z(L^e)]^2+z and oligonuclear aggregates. The pK_a values of H₆(L^e)⁶⁺ (25 °C, μ=0.10 m ) were found to be 2.99, 5.63, 6.72, 7.38, 8.37, and 9.07, and the determined formation constants (log β) of [M(L^e)]²⁺ were 6.13(3) (Mn^II), 20.11(2) (Cu^II), 13.60(2) (Zn^II), and 10.43(2) (Cd^II). The redox potentials (vs. NHE) of the [M(L^e)]^3+/2+ couples were elucidated for Co (?0.38 V) and Ni (+0.90 V) by cyclic voltammetry.     

Judiciously balancing steric and electronic influences on 2,3‐diiminobutane‐based Pd(II) complexes in nourishing polyethylene properties

A new series of palladium complexes ( Pd1–Pd5 ) ligated by symmetrical 2,3‐diiminobutane derivatives, 2,3‐bis[2,6‐bis{bis(4‐FC₆H₄)₂CH}₂‐4‐(alkyl)C₆H₂N]C₄H₆ (alkyl = Me L1 , Et L2 , ⁱ Pr L3 , ^t Bu L4 ) and 2,3‐bis[2,6‐bis{bis(C₆H₅)₂CH}₂‐4‐{(CH₃)₃C}C₆H₂N]C₄H₆ L5 , have been prepared and well characterized, and their catalytic scope toward ethylene polymerization have been investigated. Upon activation with MAO, all palladium complexes ( Pd1–Pd5) exhibited good activities (up to 1.44 × 10⁶ g (PE) mol^?1(Pd) h^?1) and produced higher molecular weight polyethylene in the range of 10⁵ g mol^?1 with precise molecular weight distribution (M _w/M _n = 1.37–1.77). One of the long‐standing limiting features of the Brookhart type α‐diimine Pd(II) catalysts is that they produce highly branched (ca. 100/1000 C atoms) and totally amorphous polymer. Conversely, herein Pd5 produced polymers having dramatically lower branching number (28/1000) as well as improved melting temperature up to 73.1 °C showing well‐controlled linear architecture, and very similar to polyethylene materials generated by early‐transition‐metal based catalysts. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3214–3222     

Four NiII complexes with the new cyclam–methylimidazole ligand 1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane

Although it has not proved possible to crystallize the newly prepared cyclam–methylimidazole ligand 1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane (L^Im1), the trans and cis isomers of an Ni^II complex, namely trans‐aqua{1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}nickel(II) bis(perchlorate) monohydrate, [Ni(C₁₅H₃₀N₆)(H₂O)](ClO₄)₂·H₂O, (1), and cis‐aqua{1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}nickel(II) bis(perchlorate), [Ni(C₁₅H₃₀N₆)(H₂O)](ClO₄)₂, (2), have been prepared and structurally characterized. At different stages of the crystallization and thermal treatment from which (1) and (2) were obtained, a further two compounds were isolated in crystalline form and their structures also analysed, namely trans‐{1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}(perchlorato)nickel(II) perchlorate, [Ni(ClO₄)(C₁₅H₃₀N₆)]ClO₄, (3), and cis‐{1,8‐bis[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}nickel(II) bis(perchlorate) 0.24‐hydrate, [Ni(C₂₀H₃₆N₆)](ClO₄)₂·0.24H₂O, (4); the 1,8‐bis[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane ligand is a minor side product, probably formed in trace amounts in the synthesis of L^Im1. The configurations of the cyclam macrocycles in the complexes have been analysed and the structures are compared with analogues from the literature.     

Hydrogen‐bonded 1,2‐bis(4‐pyridyl)ethylene and maleic acid

The title compound (systematic name: 4,4′‐ethyl­ene­dipyridinium dimaleate), C₁₂H₁₂N₂²⁺·2C₄H₃O₄^?, is a 1:2 adduct of 1,2‐bis(4‐pyridyl)­ethyl­ene (BPE) and maleic acid (MA). The interaction between the two components in the molecular complex is due to intermolecular hydrogen bonding via an N⁺—H?O^? hydrogen bond.     

Characteristics of Lariat Crown Ether‐Copper (II) Ion‐Selective Electrodes

An ion‐selective electrode using ionophore 2′‐picolyl sym‐dibenzo‐16‐crown‐5 ether as membrane carrier, sodium tetraphenylborate (NaTPB) as an anion excluder, and 2‐nitrophenyl‐octyl ether (NOPE) as the plasticing solvent mediator has been successfully developed. This electrode exhibits al in ear response with a slope of 42 mV/decade in concentration ranging from 10^?5 molL^?1 to 10^?1 molL^?1, slightly larger than the 30 mV expected from the one‐to‐one complex. The reason for the super‐Nernstain slope is the partial dimmer formation in side the membrane of the electrode, because this dimmer [Cu(C₂₅H₂₇NO₆)₂(H₂O)₂] 2ClO₄, has been isolated and confirmed by single crystal X‐ray crystallography. The detection limit for the cop per (II) ion was estimated to be 1 × 10^?6 molL^?1. Electrades composed of other plasticing solvent mediators such as tris(2‐ethylhexyl) phosphate (TOP), bis (2‐ethylhexyl) sebacate (DOS) and dibutyl phthalate (DBP) were also investigated. Stability constants (logKs) of the two to one and the one to one 2‐picolylsym‐dibenzo‐16‐crown‐5 ether‐Cu (II) complexes have been determined by potentiometric titration in methanol.     

Two different one‐dimensional structural motifs in [catena‐{Cu(tacn)}2Pd(CN)4]Br2·[catena‐Cu(tacn)Pd(CN)4]2·H2O (tacn is 1,4,7‐triazacyclononane)

The title compound, catena‐poly[[bis[(triazacyclononane‐κ³N,N′,N′′)copper(II)]‐di‐μ‐cyanido‐κ⁴N:C‐palladate(II)‐di‐μ‐cyanido‐κ⁴C:N] dibromide bis[[(triazacyclononane‐κ³N,N′,N′′)copper(II)]‐μ‐cyanido‐κ²N:C‐[dicyanidopalladate(II)]‐μ‐cyanido‐κ²C:N] monohydrate], {[Cu₂Pd(CN)₄(C₆H₁₅N₃)₂]Br₂·[Cu₂Pd₂(CN)₈(C₆H₁₅N₃)₂]·H₂O}_n, (I), was isolated from an aqueous solution containing tacn·3HBr (tacn is 1,4,7‐triazacyclononane), Cu²⁺ and tetracyanidopalladate(2−) anions. The crystal structure of (I) is essentially ionic and built up of 2,2‐electroneutral chains, viz. [Cu(tacn)(NC)–Pd(CN)₂–(CN)–], positively charged 2,4‐ribbons exhibiting the composition {[Cu(tacn)(NC)₂–Pd(CN)₂–Cu(tacn)]²ⁿ⁺}_n, bromide anions and one disordered water molecule of crystallization. The O atom of the water molecule occupies two unique crystallographic positions, one on a centre of symmetry, which is half occupied, and the other in a general position with one‐quarter occupancy. One of the tacn ligands also exhibits disorder. The formation of two different types of one‐dimensional structural motif within the same structure is a unique feature of this compound.     

Poly[di‐μ‐aqua‐μ‐1,2‐bis(pyridin‐4‐yl)ethene‐κ2N:N′‐tetrakis(4‐iodobenzoato‐κ2O,O′)dicadmium]

Colourless crystals of the title compound, [Cd₂(C₇H₄IO₂)₄(C₁₂H₁₀N₂)(H₂O)₂]_n, were obtained by the self‐assembly of Cd(NO₃)₂·4H₂O, 1,2‐bis(pyridin‐4‐yl)ethene (bpe) and 4‐iodobenzoic acid (4‐IBA). Each Cd^II atom is seven‐coordinated in a pentagonal–bipyramidal coordination environment by four carboxylate O atoms from two different 4‐IBA ligands, two O atoms from two water molecules and one N atom from a bpe ligand. The Cd^II centres are bridged by the aqua molecules and bpe ligands, which lie across centres of inversion, to give a two‐dimensional net. Topologically, taking the Cd^II atoms as nodes and the μ‐aqua and μ‐bpe ligands as linkers, the two‐dimensional structure can be simplified as a (6,3) network.     

Synthesis of 2‐Aryl‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐2,5‐dihydro‐1H‐pyrrole‐3‐carboxylates by the Reaction between Hydrazones,Acetylenedicarboxylates, and 1‐Aryl‐N,N′‐bis(arylmethylidene)methanediamines

An efficient approach for the preparation of functionalized 2‐aryl‐2,5‐dihydro‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐1H‐pyrroles is described. The four‐component reaction between aldehydes, NH₂NH₂?H₂O, dialkyl acetylenedicarboxylates, and 1‐aryl‐N,N′‐bis(arylmethylidene)methanediamines proceeds in EtOH under reflux in good‐to‐excellent yields (Scheme 1). The structures of 4 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS, and, in the case of 4f , by X‐ray crystallography). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

A one‐dimensional platinum mixed‐valence complex with bridging thiocyanate S atoms: [[PtII(en)2](μ‐SCN)[PtIV(en)2](μ‐SCN)](ClO4)4 (en is ethane‐1,2‐diamine)

A new one‐dimensional platinum mixed‐valence complex with nonhalogen bridging ligands, namely catena‐poly[[[bis(ethane‐1,2‐diamine‐κ²N,N′)platinum(II)]‐μ‐thiocyanato‐κ²S:S‐[bis(ethane‐1,2‐diamine‐κ²N,N′)platinum(IV)]‐μ‐thiocyanato‐κ²S:S] tetrakis(perchlorate)], {[Pt₂(SCN)₂(C₂H₈N₂)₄](ClO₄)₄}_n, has been isolated. The Pt^II and Pt^IV atoms are located on centres of inversion and are stacked alternately, linked by the S atoms of the thiocyanate ligands, forming an infinite one‐dimensional chain. The Pt^IV—S and Pt^II...S distances are 2.3933 (10) and 3.4705 (10) Å, respectively, and the Pt^IV—S...Pt^II angle is 171.97 (4)°. The introduction of nonhalogen atoms as bridging ligands in this complex extends the chemical modifications possible for controlling the amplitude of the charge‐density wave (CDW) state in one‐dimensional mixed‐valence complexes. The structure of a discrete Pt^IV thiocyanate compound, bis(ethane‐1,2‐diamine‐κ²N,N′)bis(thiocyanato‐κS)platinum(IV) bis(perchlorate) 1.5‐hydrate, [Pt(SCN)₂(C₄H₈N₂)₂](ClO₄)₂·1.5H₂O, has monoclinic (C2) symmetry. Two S‐bound thiocyanate ligands are located in trans positions, with an S—Pt—S angle of 177.56 (3)°.     

Guest‐, Light‐ and Thermally‐Modulated Spin Crossover in [FeII2] Supramolecular Helicates

A new bis(pyrazolylpyridine) ligand (H₂L) has been prepared to form functional [Fe₂(H₂L)₃]⁴⁺ metallohelicates. Changes to the synthesis yield six derivatives, X@[Fe₂(H₂L)₃]X(PF₆)₂?xCH₃OH ( 1 , x=5.7 and X=Cl; 2 , x=4 and X=Br), X@[Fe₂(H₂L)₃]X(PF₆)₂?yCH₃OH?H₂O ( 1 a , y=3 and X=Cl; 2 a , y=1 and X=Br) and X@[Fe₂(H₂L)₃](I₃)₂?3 Et₂O ( 1 b , X=Cl; 2 b , X=Br). Their structure and functional properties are described in detail by single‐crystal X‐ray diffraction experiments at several temperatures. Helicates 1 a and 2 a are obtained from 1 and 2 , respectively, by a single‐crystal‐to‐single‐crystal mechanism. The three possible magnetic states, [LS–LS], [LS–HS], and [HS–HS] can be accessed over large temperature ranges as a result of the structural nonequivalence of the Fe^II centers. The nature of the guest (Cl^? vs. Br^?) shifts the spin crossover (SCO) temperature by roughly 40 K. Also, metastable [LS–HS] or [HS–HS] states are generated through irradiation. All helicates (X@[Fe₂(H₂L)₃])³⁺ persist in solution.     

Comparative study of two chemically isostructural polymers: [Cu2(VO2)(HPO4)2(NO3)(bpy)2]·2H2O/H3PO4 (bpy is 2,2′‐bi­pyridine)

The title compounds, poly­[bis(2,2′‐bi­pyridine)­bis(μ₃‐hydrogen phosphato)­nitratodi‐μ₂‐oxo‐dicopper(II)­vanadium dihydrate], [Cu₂(VO₂)(HPO₄)₂(NO₃)(C₁₀H₈N₂)₂]·2H₂O, (I), and poly­[bis(2,2′‐bi­pyridine)­bis(μ₃‐hydrogen phosphato)­nitratodi‐μ₂‐oxo‐dicopper(II)­vanadium phospho­ric acid solvate], [Cu₂(VO₂)(HPO₄)₂(NO₃)(C₁₀H₈N₂)₂]·H₃PO₄, (II), were obtained by similar hydro­thermal methods but under different crystallization conditions. The trinuclear entity which serves as the basic unit in both structures presents two independent Cu^II ions immersed in similar square‐pyramidal N₂O₃ environments plus an octahedral VO₆ core and is organized into a one‐dimensional polymer, which is essentially identical in the two structures. The compounds are stabilized by different solvates, viz. two crystallization water mol­ecules in (I) and a phospho­ric acid mol­ecule in (II), which provide the main structural differences through the diversity of interchain interactions in which they serve as bridges.     

Effects of mixed aqueous‐organic solvents on the rate of intramolecular carboxylic group‐catalyzed cleavage of N‐(4′‐methoxyphenyl)phthalamic acid

Kinetic study on the cleavage of N‐(4′‐methoxyphenyl)phthalamic acid (NMPPAH) in mixed H₂O‐CH₃CN and H₂O‐1,4‐dioxan solvents containing 0.05 M HCl reveals the formation of phthalic anhydride (PAn)/phthalic acid (PA) as the sole or major product. Pseudo first‐order rate constants (k₁) for the conversion of NMPPAH to PAn decrease nonlinearly from 60.4 × 10^?5 to 2.64 × 10^?5 s^?1 with the increase in the contents of 1,4‐dioxan from 10 to 80% v/v in mixed aqueous solvents. The rate of cleavage of NMPPAH in mixed H₂O‐CH₃CN solvents at ≥50% v/v CH₃CN follows an irreversible consecutive reaction path: NMPPAH PA. The values of k₁ are larger in H₂O‐CH₃CN than in H₂O‐1,4‐dioxan solvents. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 316–325, 2004