2‐(1 H‐1,2,3‐Triazol‐4‐yl)‐Pyridine Ligands as Alternatives to 2,2′‐Bipyridines in Ruthenium(II) Complexes

The synthesis of a variety of 2‐(1H‐1,2,3‐triazol‐4‐yl)‐pyridines by click chemistry is demonstrated to provide straightforward access to mono‐functionalized ligands. The ring‐opening polymerization of ε‐caprolactone initiated by such a mono‐functionalized ligand highlights the synthetic potential of this class of bidentate ligands with respect to polymer chemistry or the attachment onto surfaces and nanoparticles. The coordination to Ru^II ions results in homoleptic and heteroleptic complexes with the resultant photophysical and electrochemical properties strongly dependent on the number of these ligands attached to the Ru^II core.     

Photoinduced Formation of an Azobenzene‐Based CD‐Active Supramolecular Cyclic Dimer

A series of new photo‐responsive amino acid‐derived azobenzenedicarboxylic acid derivatives (S)‐ 1 a – e were synthesized. Compound (S)‐ 1 a in the trans form exhibited no circular dichroism (CD) signal in DMF under ambient conditions, whereas intense Cotton effects were observed upon UV irradiation, indicating the formation of a chiral supramolecular structure in the cis form. The CD signals disappeared when trifluoroacetic acid (TFA) was added to the solution. The ester counterpart [(S)‐ 1 a′ ] showed no CD signal. Hydrogen bonding between the carboxy groups seemed necessary for constructing the supramolecular structure. The kinetic studies of cis to trans isomerization of (S)‐ 1 a demonstrated that the formation of a chiral supramolecule enhances the stability of the cis‐azobenzene structure. The ESI mass spectrum of stilbenedicarboxylic acid (S)‐ 4 , an analogue of (S)‐ 1 b , confirmed the formation of a dimer. A theoretical CD study revealed that (S)‐ 1 a in the cis form should be present as a cyclic chiral dimer.     

Engineering Te-Containing Recognition Modules for Chalcogen Bonding: Towards Supramolecular Polymeric Materials

Aiming at the preparation of one-dimensional (1D) chalcogen-bonded supramolecular polymers at the solid state, this work describes the different syntheses which have been challenged to obtain ditopic molecular modules. At first, tellurazolopyridyl (TZP) rings have been chosen as recognition units, given their well-proven ability and persistency to self-assemble through double Te⋅⋅⋅N chalcogen bonds (ChBs). The second synthetic strategy dealt with the preparation of pyridyl-modified ebselen Te-containing analogues. By attempting several synthetic protocols, the targeted ebselen derivatives could not be obtained, whereas an unexpected Te-containing lactone as well as a spiro-type Te(IV)-containing derivatives were isolated, with the latter investigated by X-ray diffraction (XRD) analysis.     

Spectroscopic Investigation of the Ultrafast Photoinduced Dynamics in π‐Conjugated Terpyridines

Ultrafast light‐induced processes in a series of π‐conjugated mono‐, bis‐, tris‐ and tetrakis(terpyridine) derivatives are investigated by femtosecond time‐resolved spectroscopy. Non‐exponential excited‐state dynamics involving singlet–triplet intersystem crossing are observed which span from picoseconds to nanoseconds (see figure).

     

Host‐Assisted Guest Self‐Assembly: Enhancement of the Dimerization of Pyronines Y and B by γ‐Cyclodextrin

Buckle up! The dimerization of small fluorescent guests is strongly enhanced in presence of a cyclodextrin host. The host cavity acts like a belt to assist the self‐assembly of guests (see picture). Small variations in the guest structure have significant influence on the stability and geometry of the aggregates.

     

How to Distinguish Isodesmic from Cooperative Supramolecular Polymerisation

To study the supramolecular polymerisation mechanisms of a self‐assembling system, concentration‐ and temperature‐dependent measurements can both be used to probe the transition from the molecular dissolved state to the aggregated state. In this report, both methods are evaluated to determine their effectiveness in identifying and quantifying the self‐assembly mechanism for isodesmic and cooperative self‐assembling systems. It was found that for a rapid and unambiguous determination of the self‐assembly mechanism and its thermodynamic parameters, temperature‐dependent measurements are more appropriate. These studies allow the acquisition of a large data set leading to an accurate determination of the self‐assembly mechanism and quantification of the different thermodynamic parameters that describe the supramolecular polymerisation. For a comprehensive characterisation, additional concentration‐dependent measurements can be performed.     

Monosaccharides as Versatile Units for Water‐Soluble Supramolecular Polymers

We introduce monosaccharides as versatile water‐soluble units to compatibilise supramolecular polymers based on the benzene‐1,3,5‐tricarboxamide (BTA) moiety with water. A library of monosaccharide‐based BTAs is evaluated, varying the length of the alkyl chain (hexyl, octyl, decyl and dodecyl) separating the BTA and saccharide units, as well as the saccharide units (α‐glucose, β‐glucose, α‐mannose and α‐galactose). In all cases, the monosaccharides impart excellent water compatibility. The length of the alkyl chain is the determining factor to obtain either long, one‐dimensional supramolecular polymers (dodecyl spacer), small aggregates (decyl spacer) or molecularly dissolved (octyl and hexyl) BTAs in water. For the BTAs comprising a dodecyl spacer, our results suggest that a cooperative self‐assembly process is operative and that the introduction of different monosaccharides does not significantly change the self‐ assembly behaviour. Finally, we investigate the potential of post‐assembly functionalisation of the formed supramolecular polymers by taking advantage of dynamic covalent bond formation between the monosaccharides and benzoxaboroles. We observe that the supramolecular polymers readily react with a fluorescent benzoxaborole derivative permitting imaging of these dynamic complexes by confocal fluorescence microscopy.     

Liquid‐Crystalline Supramolecular Polymers Formed through Complementary Nucleobase‐Pair Interactions

We report how the placement of nucleobase units, thymine, or N ⁶‐(4‐methoxybenzoyl)adenine, onto the ends of a mesogenic core, bis‐4‐alkoxy‐substituted bis(phenylethynyl)benzene, affects the properties of these materials. We show that addition of these bulky polar groups significantly reduces the range of liquid‐crystalline behavior of these compounds. However, mixing two complementary nucleobase‐containing AA‐ and BB‐type monomer units together does result in the formation of stable, thermotropic liquid‐crystalline (LC) phases. Hydrogen bonding is shown to play an important role in the formation of these LC phases, consistent with the formation of oligomeric or polymeric hydrogen‐bonded aggregates. X‐ray analyses of these mixed materials are consistent with the formation of smectic C phases.     

Synthesis and Self‐Assembly of Cyclic 2,7‐Anthrylene Ethynylene 1,3‐Phenylene Ethynylene Trimer with a Planar Conformation

Cyclic arylene ethynylene hexamer 1 , composed of alternating 2,7‐anthrylene ethynylene units and meta‐phenylene ethynylene units, was synthesized. It shows C₃ symmetry and possesses a flat and rigid conformation with a large equilateral triangle‐like cavity. Macrocycle 1 self‐associates through π–π stacking interactions between the anthracene‐containing macrocyclic aromatic cores with indefinite‐association constant K_E=6980 m ^?1 in CDCl₃ at 303 K. Macrocycle 1 also self‐assembles into π‐stacked nanofibers in the drop‐cast film.     

Supramolecular Diblock Copolymers Featuring Well‐defined Telechelic Building Blocks

We report supramolecular AB diblock copolymers comprised of well‐defined telechelic building blocks. Helical motifs, formed via reversible addition‐fragmentation chain‐transfer (RAFT) or anionic polymerization, are assembled with coil‐forming and sheet‐featuring blocks obtained via atom‐transfer radical polymerization (ATRP) or ring‐opening metathesis polymerization (ROMP). Interpolymer hydrogen bonding or metal‐coordination achieves dynamic diblock architectures featuring hybrid topologies of coils, helices, and/or π‐stacked sheets that, on a basic level, mimic protein structural motifs in fully synthetic systems. The intrinsic properties of each block (e.g., circular dichroism and fluorescence) remain unaffected in the wake of self‐assembly. This strategy to develop complex synthetic polymer scaffolds from functional building blocks is significant in a field striving to produce architectures reminiscent of biosynthesis, yet fully synthetic in nature. This is the first plug‐and‐play approach to fabricate hybrid π‐sheet/helix, π‐sheet/coil, and helix/coil architectures via directional self‐assembly.     

Lewis Base Sequestered Chalcogen Dihalides: Synthetic Sources of ChX2 (Ch=Se,Te; X=Cl,Br)

The synthesis and comprehensive characterization of a series of base‐stabilized ChX₂ (Ch=Se, Te; X=Cl, Br) is reported using aryl‐substituted diazabutadiene and 2,2′‐bipyridine (bipy) as the ligands. In stark contrast to free ChX₂ the complexes display excellent thermal stability. Their use as viable ChX₂ reagents that may be stored for later use is demonstrated in principle. The syntheses are simple and high‐yielding from commercially available or easily synthesized reagents. The bipy complexes are exceedingly rare examples of this ubiquitous ligand being utilized within Group 16 chemistry; the Se examples are the first to be characterized by X‐ray crystallography, and the Te species are only the second.     

Chalcogen‐Bonding Catalysis: From Neutral to Cationic Benzodiselenazole Scaffolds

Benzodiselenazoles (BDS) are emerging as privileged structures for chalcogen‐bonding catalysis in the focal point of conformationally immobilized σ holes on strong selenium donors in a neutral scaffold. Whereas much attention has been devoted to work out the advantages of selenium compared to the less polarizable sulfur donors, high expectations concerning bidentate, rigid, and neutral scaffolds have been generated with little experimental support. Here we report design, synthesis and evaluation of the necessary catalysts to confirm that i) bidentate BDS are more effective than their monodentate analogs, ii) conformationally immobilized scaffolds are more effective than more flexible ones, iii) cationic BDS scaffolds are more effective than neutral ones, and iv) in dicationic‐bidentate BDS, contributions from chalcogen‐bonding dominate possible contributions from ion‐pairing catalysis. These conclusions result from rate enhancements found for a Ritter‐type anion‐binding reaction and an X‐ray crystal structure of dicationic BDS with a triflate anion bound with highest precision in the focal point of the σ holes.     

A Puckered Singlet Cyclopentane‐1,3‐diyl: Detection of the Third Isomer in Homolysis

In the photochemical denitrogenation of 1,4‐diaryl‐2,3‐diazabicyclo[2.2.1]heptane ( AZ6 ) bearing sterically hindered substituents, a curious new absorption band at about 450 nm was observed under low‐temperature matrix conditions, together with the previously well‐characterized planar singlet diradical pl‐¹ DR6 with λ_max=≈580 nm. The 450 nm species was electron paramagnetic resonance (EPR)‐silent. Instead of generating the planar diradical pl‐¹ DR6 and the precursor azoalkane AZ6 upon warming, the ring‐closed bicyclo[2.1.0]pentane derivative SB6 , that is, the AZ6 denitrogenation product was identified. Based on product analysis, low‐temperature spectroscopic observations, high‐level quantum‐mechanical computations, viscosity effect, and laser‐flash photolysis, the puckered singlet diradicaloid puc‐¹ DR6 was assigned to the new 450 nm absorption. The latter was detected experimentally at the same time as the planar singlet diradical pl‐¹ DR6 . Sterically demanding substituents as well as viscosity impediments were essential for the detection of the experimentally hitherto unknown puckered singlet cyclopentane‐1,3‐diyl diradicaloid puc‐¹ DR6 , that is, the third isomer in homolysis. The present findings should stimulate future work on the mechanistically fascinating stereoselectivity documented in the formation of bicyclo[2.1.0]pentanes during the 2,3‐diazabicyclo[2.2.1]heptane denitrogenation.     

NIR‐Absorbing Donor–Acceptor Based 1,1,4,4‐Tetracyanobuta‐1,3‐Diene (TCBD)‐ and Cyclohexa‐2,5‐Diene‐1,4‐Ylidene‐Expanded TCBD‐Substituted Ferrocenyl Phenothiazines

A series of unsymmetrical (D‐A‐D₁, D₁‐π‐D‐A‐D₁, and D₁‐A₁‐D‐A₂‐D₁; A=acceptor, D=donor) and symmetrical (D₁‐A‐D‐A‐D₁) phenothiazines ( 4 b , 4 c , 4 c′ , 5 b , 5 c , 5 d , 5 d′ , 5 e , 5 e′ , 5 f , and 5 f′ ) were designed and synthesized by a [2+2] cycloaddition–electrocyclic ring‐opening reaction of ferrocenyl‐substituted phenothiazines with tetracyanoethylene (TCNE) and 7,7,8,8‐tetracyanoquinodimethane (TCNQ). The photophysical, electrochemical, and computational studies show a strong charge‐transfer (CT) interaction in the phenothiazine derivatives that can be tuned by varying the number of TCNE/TCNQ acceptors. Phenothiazines 4 b , 4 c , 4 c′ , 5 b , 5 c , 5 d , 5 d′ , 5 e , 5 e′ , 5 f and 5 f′ show redshifted absorption in the λ =400 to 900 nm region, as a result of a low HOMO–LUMO gap, which is supported by TD‐DFT calculations. The electrochemical study exhibits reduction waves at low potential due to strong 1,1,4,4‐tetracyanobuta‐1,3‐diene (TCBD) and cyclohexa‐2,5‐diene‐1,4‐ylidene‐expanded TCBD acceptors. The incorporation of cyclohexa‐2,5‐diene‐1,4‐ylidene‐expanded TCBD stabilized the LUMO energy level to a greater extent than TCBD.     

A 1,3‐Indandione‐Functionalized Tetraphenylethene: Aggregation‐Induced Emission,Solvatochromism, Mechanochromism,and Potential Application as a Multiresponsive Fluorescent Probe

A tetraphenylethene (TPE) derivative substituted with the electron‐acceptor 1,3‐indandione (IND) group was designed and prepared. The targeted IND‐TPE reserves the intrinsic aggregation‐induced emission (AIE) property of the TPE moiety. Meanwhile, owing to the decorated IND moiety, IND‐TPE demonstrates intramolecular charge‐transfer process and pronounced solvatochromic behavior. When the solvent is changed from apolar toluene to highly polar acetonitrile, the emission peak redshifts from 543 to 597 nm. IND‐TPE solid samples show an evident mechanochromic process. Grinding of the as‐prepared powder sample induces a redshift of emission from green (peak at 515 nm) to orange (peak at 570 nm). The mechanochromic process is reversible in multiple grinding–thermal annealing and grinding–solvent‐fuming cycles, and the emission of the solid sample switches between orange (ground) and yellow (thermal/solvent‐fuming‐treated) colors. The mechanochromism is ascribed to the phase transition between amorphous and crystalline states. IND‐TPE undergoes a hydrolysis reaction in basic aqueous solution, thus the red‐orange emission can be quenched by OH^? or other species that can induce the generation of sufficient OH^?. Accordingly, IND‐TPE has been used to discriminatively detect arginine and lysine from other amino acids, due to their basic nature. The experimental data are satisfactory. Moreover, the hydrolyzation product of IND‐TPE is weakly emissive in the resultant mixture but becomes highly blue‐emissive after the illumination for a period by UV light. Thus IND‐TPE can be used as a dual‐responsive fluorescent probe, which may extend the application of TPE‐based molecular probes in chemical and biological categories.     

Achieving Strong Positive Cooperativity through Activating Weak Non‐Covalent Interactions

Positive cooperativity achieved through activating weak non‐covalent interactions is common in biological assemblies but is rarely observed in synthetic complexes. Two new molecular tubes have been synthesized and the syn isomer binds DABCO‐based organic cations with high orientational selectivity. Surprisingly, the ternary complex with two hosts and one guest shows a high cooperativity factor (α=580), which is the highest reported for synthetic systems without involving ion‐pairing interactions. The X‐ray single‐crystal structure revealed that the strong positive cooperativity likely originates from eight C?H???O hydrogen bonds between the two head‐to‐head‐arranged syn tube molecules. These relatively weak hydrogen bonds were not observed in the free hosts and only emerged in the complex. Furthermore, this complex was used as a basic motif to construct a robust [2+2] cyclic assembly, thus demonstrating its potential in molecular self‐assembly.     

α‐Chymotrypsin‐Catalyzed Reaction Confined in Block‐Copolymer Vesicles

Herein the reactivity of the enzyme α‐chymotrypsin in the confinement of polystyrene‐block‐poly(acrylic acid) (PS‐b‐PAA) vesicles was investigated. Enzyme and substrate molecules were encapsulated in PS‐b‐PAA vesicles with internal diameters ranging from 26 nm to 165 nm during the formation of the vesicles. While the loading efficiencies of enzyme and substrate molecules were practically identical for vesicles of identical size, they were found to increase with decreasing vesicle size. The kinetics of the α‐chymotrypsin catalyzed hydrolysis of N‐succinyl‐Ala‐Ala‐Phe‐7‐amido‐4‐methylcoumarin (AMC) was evaluated following the increase of the absorption of the product 7‐amino‐4‐methylcoumarin by UV/Vis spectroscopy. The values of the catalytic turnover number obtained for reactions inside vesicles with different sizes showed an increase of up to fourteen times compared to the bulk value with decreasing vesicle volume, while the values of the Michaelis–Menten constant decreased, respectively. This increase in reactivity of α‐chymotrypsin is attributed to the effect of vesicle–wall interactions in the finite encapsulated space, where the reagents could diffuse, leading to enhanced collision frequencies.     

Metal‐Ion‐Mediated Supramolecular Chirality of l‐Phenylalanine Based Hydrogels

For chiral hydrogels and related applications, one of the critical issues is how to control the chirality of supramolecular systems in an efficient way, including easy operation, efficient transfer of chirality, and so on. Herein, supramolecular chirality of l ‐phenylalanine based hydrogels can be effectively controlled by using a broad range of metal ions. The degree of twisting (twist pitch) and the diameter of the chiral nanostructures can also be efficiently regulated. These are ascribed to the synergic effect of hydrogen bonding and metal ion coordination. This study may develop a method to design a new class of electronically, optically, and biologically active materials.