Synthesis of 5‐ and 8‐Deoxytetrodotoxin

Tetrodotoxin, a toxic principle of puffer fish intoxication, is one of the most famous marine natural products owing to its complex structure and potent biological activity, which leads to fatal poisoning. Continuous synthetic studies on tetrodotoxin and its analogues to elucidate biologically interesting issues associated with tetrodotoxin have led to the development of versatile routes for a variety of tetrodotoxin derivatives. With the aim of investigating the structure–activity relationship of tetrodotoxin with voltage‐gated sodium channels, this study describes the first total syntheses of 5‐deoxytetrodotoxin, a natural analogue of tetrodotoxin, and 8‐deoxytetrodotoxin, an unnatural analogue, from a newly designed, versatile intermediate in an efficient manner. An estimation of the biological activities of these compounds reveals the importance of the hydroxy groups at the C‐5 and C‐8 positions on the inhibition of voltage‐gated sodium channels.     

Solid‐phase Total Synthesis of (−)‐Apratoxin A and Its Analogues and Their Biological Evaluation

Two approaches for the solid‐phase total synthesis of apratoxin A and its derivatives were accomplished. In synthetic route A, the peptide was prepared by the sequential coupling of the corresponding amino acids on trityl chloride SynPhase Lanterns. After cleavage from the polymer‐support, macrolactamization of 10 , followed by thiazoline formation, provided apratoxin A. This approach, however, resulted in low yield because the chemoselectivity was not sufficient for the formation of the thiazoline ring though its analogue 33 was obtained. However, in synthetic route B, a cyclization precursor was prepared by solid‐phase peptide synthesis by using amino acids 13 – 15 and 18 . The final macrolactamization was performed in solution to provide apratoxin A in high overall yield. This method was then successfully applied to the synthesis of apratoxin analogues. The cytotoxic activity of the synthetic derivatives was then evaluated. The epimer 34 was as potent as apratoxin A, and O‐methyl tyrosine can be replaced by 7‐azidoheptyl tyrosine without loss of activity. The 1,3‐dipolar cycloaddition of 38 with phenylacetylene was performed in the presence of a copper catalyst without affecting the thiazoline ring.     

Trimodal Control of Ion‐Transport Activity on Cyclo‐oligo‐(1→6)‐β‐D‐glucosamine‐Based Artificial Ion‐Transport Systems

Cyclo‐oligo‐(1→6)‐β‐D ‐glucosamines functionalized with hydrophobic tails are reported as a new class of transmembrane ion‐transport system. These macrocycles with hydrophilic cavities were introduced as an alternative to cyclodextrins, which are supramolecular systems with hydrophobic cavities. The transport activities of these glycoconjugates were manipulated by altering the oligomericity of the macrocycles, as well as the length and number of attached tails. Hydrophobic tails of 3 different sizes were synthesized and coupled with each glucosamine scaffold through the amide linkage to obtain 18 derivatives. The ion‐transport activity increased from di‐ to tetrameric glucosamine macrocycles, but decreased further when flexible pentameric glucosamine was introduced. The ion‐transport activity also increased with increasing length of attached linkers. For a fixed length of linkers, the transport activity decreased when the number of such tails was reduced. All glycoconjugates displayed a uniform anion‐selectivity sequence: Cl^?>Br^?>I^?. From theoretical studies, hydrogen bonding between the macrocycle backbone and the anion bridged through water molecules was observed.     

Concise Synthesis and Biological Assessment of (+)‐Neopeltolide and a 16‐Member Stereoisomer Library of 8,9‐Dehydroneopeltolide: Identification of Pharmacophoric Elements

We describe herein a concise synthesis of (+)‐neopeltolide, a marine macrolide natural product that elicits a highly potent antiproliferative activity against several human cancer cell lines. Our synthesis exploited the powerful bond‐forming ability and high functional group compatibility of olefin metathesis and esterification reactions to minimize manipulations of oxygen functionalities and to maximize synthetic convergency. Our findings include a chemoselective olefin cross‐metathesis reaction directed by H‐bonding, and a ring‐closing metathesis conducted under non‐high dilution conditions. Moreover, we developed a 16‐member stereoisomer library of 8,9‐dehydroneopeltolide to systematically explore the stereostructure–activity relationships. Assessment of the antiproliferative activity of the stereoisomers against A549 human lung adenocarcinoma, MCF‐7 human breast adenocarcinoma, HT‐1080 human fibrosarcoma, and P388 murine leukemia cell lines has revealed marked differences in potency between the stereoisomers. This study provides comprehensive insights into the structure–activity relationship of this important antiproliferative agent, leading to the identification of the pharmacophoric structural elements and the development of truncated analogues with nanomolar potency.     

Synthesis and Biological Activity of 7,8,9‐Trideoxy‐ and 7R DesTHP‐Peloruside A

The stereoselective syntheses of 7,8,9‐trideoxypeloruside A ( 4 ) and a monocyclic peloruside A analogue lacking the entire tetrahydropyran moiety ( 3 ) are described. The syntheses proceeded through the PMB‐ether of an ω‐hydroxy β‐keto aldehyde as a common intermediate which was elaborated into a pair of diastereomeric 1,3‐syn and ‐anti diols by stereoselective Duthaler–Hafner allylations and subsequent 1,3‐syn or anti reduction. One of these isomers was further converted into a tetrahydropyran derivative in a high‐yielding Prins reaction, to provide the precursor for bicyclic analogue 4 . Downstream steps for both syntheses included the substrate‐controlled addition of a vinyl lithium intermediate to an aldehyde, thus connecting the peloruside side chain to C15 (C13) of the macrocyclic core structure in a fully stereoselective fashion. In the case of monocyclic 3 macrocyclization was based on ring‐closing olefin metathesis (RCM), while bicyclic 4 was cyclized through Yamaguchi‐type macrolactonization. The macrolactonization step was surprisingly difficult and was accompanied by extensive cyclic dimer formation. Peloruside A analogues 3 and 4 inhibited the proliferation of human cancer cell lines in vitro with micromolar and sub‐micromolar IC₅₀ values, respectively. The higher potency of 4 highlights the importance of the bicyclic core structure of peloruside A for nM biological activity.     

Probing o‐Diphenylphosphanyl Benzoate (o‐DPPB)‐Directed CC Bond Formation: Total Synthesis of Dictyostatin

Herein, we report a robust total synthesis of dictyostatin. This polyketide natural product has attracted much attention because of its impressive antiproliferative activity against several human cancer‐cell lines. We accomplished its synthesis in a highly convergent manner from three fragments of equal complexity, which were prepared on multigram scale. The southern and northwestern subunits were constructed through application of our o‐DPPB‐directed hydroformylation and allylic substitution methodology, respectively. These methods generated the C6 and C14 stereocenters of dictyostatin with good diastereoselectivities and simultaneously allowed further elaboration of the fragments by Wittig olefination and Sharpless asymmetric epoxidation, respectively. The compelling performance of the hydroformylation and allylic substitution with regard to practicability, selectivity, and scale underline their value for the construction of propionate motifs.     

Synthesis and Structure–Activity Relationship of Vicenistatin,a Cytotoxic 20‐Membered Macrolactam Glycoside

We have developed two syntheses of vicenistatin and its analogues. Our first‐generation strategy included the rapid and sequential assembly of the macrocyclic lactam by using an intermolecular Horner–Wadsworth–Emmons reaction between the C3–C13 fragment and the C1–C2, C14–C19 fragment, followed by an intramolecular Stille coupling reaction. The second‐generation strategy utilized a ring‐closing metathesis of a hexaene intermediate to generate the desired 20‐membered macrolactam. This second‐generation strategy made it possible to prepare synthetic analogues of vicenistatin, including the C20‐ and/or C23‐demethyl analogues. Evaluation of the cytotoxic effect of these analogues indicated the importance of the fixed conformation of aglycon for determining the biological activity of the vicenistatins.     

Chemical Synthesis of Burkholderia Lipid A Modified with Glycosyl Phosphodiester‐Linked 4‐Amino‐4‐deoxy‐β‐L‐arabinose and Its Immunomodulatory Potential

Modification of the Lipid A phosphates by positively charged appendages is a part of the survival strategy of numerous opportunistic Gram‐negative bacteria. The phosphate groups of the cystic fibrosis adapted Burkholderia Lipid A are abundantly esterified by 4‐amino‐4‐deoxy‐β‐L ‐arabinose (β‐L ‐Ara4N), which imposes resistance to antibiotic treatment and contributes to bacterial virulence. To establish structural features accounting for the unique pro‐inflammatory activity of Burkholderia LPS we have synthesised Lipid A substituted by β‐L ‐Ara4N at the anomeric phosphate and its Ara4N‐free counterpart. The double glycosyl phosphodiester was assembled by triazolyl‐tris‐(pyrrolidinyl)phosphonium‐assisted coupling of the β‐L ‐Ara4N H‐phosphonate to α‐lactol of β(1→6) diglucosamine, pentaacylated with (R)‐(3)‐acyloxyacyl‐ and Alloc‐protected (R)‐(3)‐hydroxyacyl residues. The intermediate 1,1′‐glycosyl‐H‐phosphonate diester was oxidised in anhydrous conditions to provide, after total deprotection, β‐L ‐Ara4N‐substituted Burkholderia Lipid A. The β‐L ‐Ara4N modification significantly enhanced the pro‐inflammatory innate immune signaling of otherwise non‐endotoxic Burkholderia Lipid A.     

Total Synthesis and Biological Evaluation of (+)‐Gambieric Acid A and Its Analogues

In this study, we report the first total synthesis and complete stereostructure of gambieric acid A, a potent antifungal polycyclic ether metabolite, in detail. The A/B‐ring exocyclic enol ether 32 was prepared through a Suzuki–Miyaura coupling of the B‐ring vinyl iodide 18 and the alkylborate 33 and subsequent closure of the A‐ring by using diastereoselective bromoetherification as the key transformation. Suzuki–Miyaura coupling of 32 with acetate‐derived enol phosphate 49 , followed by ring‐closing metathesis of the derived diene, produced the D‐ring. Subsequent closure of the C‐ring through a mixed thioacetalization completed the synthesis of the A/BCD‐ring fragment 8 . The A/BCD‐ and F′GHIJ‐ring fragments (i.e., 8 and 9 ) were assembled through Suzuki–Miyaura coupling. The C25 stereogenic center was elaborated by exploiting the intrinsic conformational property of the seven‐membered F′‐ring. After the oxidative cleavage of the F′‐ring, the E‐ring was formed as a cyclic mixed thioacetal (i.e., 70 ) and then stereoselectively allylated by using glycosylation chemistry. Ring‐closing metathesis of the diene 3 thus obtained closed the F‐ring and completed the polycyclic ether skeleton. Finally, the J‐ring side chain was introduced by using a Julia–Kocienski olefination in the presence of CeCl₃ to complete the total synthesis of gambieric acid A ( 1 ), thereby unambiguously establishing its complete stereostructure. The present total synthesis enabled us to evaluate the antifungal and antiproliferative activities of 1 and several synthetic analogues.     

Conformationally Homogeneous Heterocyclic Pseudotetrapeptides as Three‐Dimensional Scaffolds for Rational Drug Design: Receptor‐Selective Somatostatin Analogues

A would‐be amide : A 1,4‐disubstituted 1,2,3‐triazole was used as a surrogate for a trans amide bond to create a library of 16 diastereomeric pseudotetrapeptides as β‐turn mimetics. High‐resolution structural analysis indicated that these scaffolds adopt distinct, rigid, conformationally homogeneous β‐turn‐like structures (see example), some of which bind somatostatin receptor subtypes selectively, and some of which show broad‐spectrum activity.

     

Stereoselective Synthesis and Physicochemical Properties of Liquid‐Crystal Compounds Possessing a trans‐2,5‐Disubstituted Tetrahydropyran Ring with Negative Dielectric Anisotropy

Three stereoselective syntheses and the physicochemical properties of trans,trans‐5‐(4‐ethoxy‐2,3‐difluorophenyl)‐2‐(4‐propylcyclohexyl)tetrahydropyran, which is an important liquid‐crystal compound with a large negative dielectric anisotropy (Δε=?7.3), are described. The key step in the construction of the trans‐2,5‐disubstituted tetrahydropyran ring in the first approach involved a benzylic cation mediated intramolecular olefin cyclization of a 2‐allyloxy‐1‐arylethanol derivative. The second method included the Et₂Zn‐induced 1,2‐aryl shift of a bromohydrin obtained from a hetero‐Diels–Alder reaction, followed by stereoselective bromination. The third approach utilized the hetero‐Diels–Alder reaction of trans‐4‐propylcyclohexanecarboxaldehyde and a 2‐aryl‐3‐(trimethylsilyl)oxy‐1,3‐butadiene, followed by stereoselective protonation. From results obtained by using a quantum chemical calculation method, the reason why the target compound shows a large negative Δε value is discussed.     

Aggregation‐Induced Emission Rotors: Rational Design and Tunable Stimuli Response

A novel molecular design strategy is provided to rationally tune the stimuli response of luminescent materials with aggregation‐induced emission (AIE) characteristics. A series of new AIE‐active molecules (AIE rotors) are prepared by covalently linking different numbers of tetraphenylethene moieties together. Upon gradually increasing the number of rotatable phenyl rings, the sensitivity of the response of the AIE rotors to viscosity and temperature is significantly enhanced. Although the molecular size is further enlarged, the performance is only slightly improved due to slightly increased effective rotors, but with largely increased rotational barriers. Such molecular engineering and experimental results offer more in‐depth insight into the AIE mechanism, namely, restriction of intramolecular rotations. Notably, through this rational design, the AIE rotor with the largest molecular size turns out to be the most viscosensitive luminogen with a viscosity factor of up to 0.98.     

Design and Synthesis of (13S)‐Methyl‐Substituted Arachidonic Acid Analogues: Templates for Novel Endocannabinoids

Two novel methyl‐substituted arachidonic acid derivatives were prepared in an enantioselective manner from commercially available chiral building blocks, and were found to be excellent templates for the development of (13S)‐methyl‐substituted anandamide analogues. One of the compounds synthesized, namely, (13S,5Z,8Z,11Z,14Z)‐13‐methyl‐eicosa‐5,8,11,14‐tetraenoic acid N‐(2‐hydroxyethyl)amide, is an endocannabinoid analogue with remarkably high affinity for the CB1 cannabinoid receptor.     

Chemical Modification of Reducing End‐Groups in Cellulose Nanocrystals

Native plant cellulose has an intrinsic supramolecular structure. Consequently, it can be isolated as nanocellulose species, which can be utilized as building blocks for renewable nanomaterials. The structure of cellulose also permits its end‐wise modification, i.e., chemical reactions exclusively on one end of a cellulose chain or a nanocellulose particle. The premises for end‐wise modification have been known for decades. Nevertheless, different approaches for the reactions have emerged only recently, because of formidable synthetic and analytical challenges associated with the issue, including the adverse reactivity of the cellulose reducing end and the low abundance of newly introduced functionalities. This Review gives a full account of the scientific underpinnings and challenges related to end‐wise modification of cellulose nanocrystals. Furthermore, we present how the chemical modification of cellulose nanocrystal ends may be applied to directed assembly, resulting in numerous possibilities for the construction of new materials, such as responsive liquid crystal templates and composites with tailored interactions.     

Rapid Total Synthesis of Cyclic Lipodepsipeptides as a Premise to Investigate their Self‐Assembly and Biological Activity

A rapid and efficient total synthesis is reported for the cyclic lipodepsipeptide pseudodesmin A. This member of the Pseudomonas viscosin group is active against Gram‐positive bacteria and features self‐assembling properties. A conserved serine residue within the lactone macrocycle is exploited for initial immobilization on 2‐chlorotrityl chloride resin through ether formation with the side‐chain alcohol. Subsequent elongation proceeds through Fmoc solid‐phase peptide synthesis, including automated incorporation of the enantioselectively synthesized (R)‐3‐hydroxydecanoic acid lipid tail. Following esterification to generate the incipient lactone bond, the macrocycle is formed by on‐resin head‐to‐tail macrolactamization and cleaved from the resin to give the desired compound in good purity. The short and efficient synthesis route allows rapid generation of analogues by facile variation of both the peptide and lipid moieties with good control of epimerization while maximizing automation. Synthesis of the pseudodesmin A enantiomer yields identical self‐assembly and biological activity to that observed for the natural compound, showing that activity is not mediated by chiral interactions. A D ‐Asn8 analogue developed en route retains self‐assembly, but loses activity. The synthesis strategy should be generally applicable for the rapid generation of analogues from various cyclic lipodepsipeptide groups, allowing an investigation of their self‐assembling properties and structure–activity relationships.     

Aerobic Iron‐Based Cross‐Dehydrogenative Coupling Enables Efficient Diversity‐Oriented Synthesis of Coumestrol‐Based Selective Estrogen Receptor Modulators

An iron‐based cross‐dehydrogenative coupling (CDC) approach was applied for the diversity‐oriented synthesis of coumestrol‐based selective estrogen receptor modulators (SERMs), representing the first application of CDC chemistry in natural product synthesis. The first stage of the two‐step synthesis of coumestrol involved a modified aerobic oxidative cross‐coupling between ethyl 2‐(2,4‐dimethoxybenzoyl)acetate and 3‐methoxyphenol, with FeCl₃ (10 mol %) as the catalyst. The benzofuran coupling product was then subjected to sequential deprotection and lactonization steps, affording the natural product in 59 % overall yield. Based on this new methodology other coumestrol analogues were prepared, and their effects on the proliferation of the estrogen receptor (ER)‐dependent MCF‐7 and of the ER‐independent MDA‐MB‐231 breast cancer cells were tested. As a result, new types of estrogen receptor ligands having an acetamide group instead of the 9‐hydroxyl group of coumestrol were discovered. Both 9‐acetamido‐coumestrol and 8‐acetamidocoumestrol were found more active than the natural product against estrogen‐dependent MCF‐7 breast cancer cells, with IC₅₀ values of 30 and 9 nM , respectively.     

Solid‐Phase Combinatorial Synthesis and Biological Evaluation of Destruxin E Analogues

The solid‐phase combinatorial synthesis of cyclodepsipeptide destruxin E has been demonstrated. The combinatorial synthesis of cyclization precursors 8 was achieved by using a split and pool method on SynPhase Lanterns. The products were successfully macrolactonized in parallel in the solution phase by using 2‐methyl‐6‐nitrobenzoic anhydride and 4‐(dimethylamino)pyridine N‐oxide to afford macrolactones 9 , and the subsequent formation of an epoxide in the side chain gave 18 member destruxin E analogues 6 . Biological evaluation of analogues 6 indicated that the N‐MeAla residue was crucial to the induction of morphological changes in osteoclast‐like multinuclear cells (OCLs). Based on structure–activity relationships, azido‐containing analogues 15 were then designed for use as a molecular probe. The synthesis and biological evaluation of analogues 15 revealed that 15 b , in which the Ile residue was replaced with a Lys(N₃) residue, induced morphological changes in OCLs at a sufficient concentration, and modification around the Ile residue would be tolerated for attachment of a chemical tag toward the target identification of destruxin E ( 1 ).