Hydrogen‐bonding‐aided synthesis of novel ladderlike organobridged polysiloxane containing side‐chain naphthyl groups

With a hydrogen‐bonding template, a novel soluble aryl amide‐bridged ladderlike polysiloxane, containing naphthyl as the side‐chain group, has been successfully synthesized via a stepwise coupling polymerization. It is proposed that the monomer, N,N′‐di(3‐naphthyldiethoxylsilyl‐propyl)‐[4,4′‐oxybis(benzyl amide)], prepared by Grignard and hydrosilylation reactions, undergoes self‐assembly first via amido hydrogen bonding and then via hydrolysis, followed by condensation under controlled reaction conditions to yield a high molecular weight, soluble, dark yellow polymer. The analytical results (Fourier transform infrared, ¹H NMR, ²⁹Si NMR, X‐ray diffraction, differential scanning calorimetry, and vapor pressure osmometry) show that the polymer possesses an ordered ladderlike architecture. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 636–644, 2003     

Synthesis of Poly(benzothiadiazole‐co‐dithienobenzodithiophenes) and Effect of Thiophene Insertion for High‐Performance Polymer Solar Cells

We describe herein the synthesis of novel donor–acceptor conjugated polymers with dithienobenzodithiophenes (DTBDT) as the electron donor and 2,1,3‐benzothiadiazole as the electron acceptor for high‐performance organic photovoltaics (OPVs). We studied the effects of strategically inserting thiophene into the DTBDT as a substituent on the skeletal structure on the opto‐electronic performances of fabricated devices. From UV/Vis absorption, electrochemical, and field‐effect transistor analyses, we found that the thiophene‐containing DTBDT derivative can substantially increase the orbital overlap area between adjacent conjugated chains and thus dramatically enhance charge‐carrier mobility up to 0.55 cm² V^?1 s^?1. The outstanding charge‐transport characteristics of this polymer allowed the realization of high‐performance organic solar cells with a power conversion efficiency (PCE) of 5.1 %. Detailed studies on the morphological factors that enable the maximum PCE of the polymer solar cells are discussed along with a hole/electron mobility analysis based on the space‐charge‐limited current model.     

Metal‐Functionalized Silicene for Efficient Hydrogen Storage

First‐principles calculations based on density functional theory are used to investigate the electronic structure along with the stability, bonding mechanism, band gap, and charge transfer of metal‐functionalized silicene to envisage its hydrogen‐storage capacity. Various metal atoms including Li, Na, K, Be, Mg, and Ca are doped into the most stable configuration of silicene. The corresponding binding energies and charge‐transfer mechanisms are discussed from the perspective of hydrogen‐storage compatibility. The Li and Na metal dopants are found to be ideally suitable, not only for strong metal‐to‐substrate binding and uniform distribution over the substrate, but also for the high‐capacity storage of hydrogen. The stabilities of both Li‐ and Na‐functionalized silicene are also confirmed through molecular dynamics simulations. It is found that both of the alkali metals, Li⁺ and Na⁺, can adsorb five hydrogen molecules, attaining reasonably high storage capacities of 7.75 and 6.9 wt %, respectively, with average adsorption energies within the range suitable for practical hydrogen‐storage applications.     

Metal Phthalocyanine‐Porphyrin‐based Conjugated Microporous Polymer‐derived Bifunctional Electrocatalysts for Zn‐Air Batteries

Conjugated microporous polymers (CMPs) as emerging porous materials with diverse structures and tunable building‐units have attracted much attention in the electrochemical field. Herein, we designed phthalocyanine‐porphyrin‐based conjugated microporous polymers as precursors for fabrication of Co, Fe, N tri‐doped graphene composites towards oxygen reduction and evolution reaction (ORR/OER). As expected, the elements cobalt and iron are well dispersed in graphene carbon and interact with the nitrogen sites, thereby providing extra electrocatalytic active sites and enhancing its overall conductivity. Benefiting from its unique design and structure, the obtained catalyst affords a superior bifunctional catalytic activity with a positive onset potential of 0.957 V for ORR, and a low overpotential of 0.36 V for OER. More attractively, the CoFeNG is employed as an air cathode catalyst in Zn‐air batteries, showing a maximum current density of 215 mA cm^?2 and good cycle stability for 20000 s. The rational design of phthalocyanine‐porphyrin‐based derivatives provides a feasible route for the construction of high‐performance ORR/OER catalysts.     

Cross‐Linked Polyphosphazene Hollow Nanosphere‐Derived N/P‐Doped Porous Carbon with Single Nonprecious Metal Atoms for the Oxygen Reduction Reaction

Heteroatom‐doped polymers or carbon nanospheres have attracted broad research interest. However, rational synthesis of these nanospheres with controllable properties is still a great challenge. Herein, we develop a template‐free approach to construct cross‐linked polyphosphazene nanospheres with tunable hollow structures. As comonomers, hexachlorocyclotriphosphazene provides N and P atoms, tannic acid can coordinate with metal ions, and the replaceable third comonomer can endow the materials with various properties. After carbonization, N/P‐doped mesoporous carbon nanospheres were obtained with small particle size (≈50 nm) and high surface area (411.60 m² g^?1). Structural characterization confirmed uniform dispersion of the single atom transition metal sites (i.e., Co‐N₂P₂) with N and P dual coordination. Electrochemical measurements and theoretical simulations revealed the oxygen reduction reaction performance. This work provides a solution for fabricating diverse heteroatom‐containing polymer nanospheres and their derived single metal atom doped carbon catalysts.     

Synthesis of π‐conjugated network polymers based on fluoroarene and fluorescent units via direct arylation polycondensation and their porosity and fluorescent properties

In this study, we report the synthesis of π‐conjugated network polymers including unique fluorescent units via palladium‐catalyzed direct (C? H) arylation polycondensation of 1,2,4,5‐tetrafluorobenzene with tetrabromoarenes. The obtained polymers, including tetraphenylethene (TPE) or pyrene (PYR) units, had microporous structures with the specific Brunauer–Emmett–Teller (BET) surface areas at 508 and 824 m² g^?1, respectively. These polymers possessed narrow pore distributions (<15 nm). These analyses supported that π‐conjugated microporous polymers (CMPs) were synthesized by the direct arylation. Similar to the result of BET surface areas, carbon capture capacity of CMP based on PYR unit was higher than that of CMP based on TPE unit. Because the nitrogen capture capacity of these CMPs was low (≈ 0), selectivity of carbon dioxide adsorption was very high. TPE is a typical aggregation‐induced emission unit but PYR is an aggregation‐caused quenching (ACQ) molecule. The incorporation of TPE unit into the microporous polymer gave green‐colored fluorescence (Φ = 0.12). The polymer including PYR units also showed the green‐colored fluorescence (Φ = 0.05) even though the ACQ property. These synthesized CMPs exhibited characteristic solvatofluorochromism. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3862–3867     

Lithium‐Doped Silica‐Rich MIL‐101(Cr) for Enhanced Hydrogen Uptake

Metal‐organic frameworks (MOFs) show promising characteristics for hydrogen storage application. In this direction, modification of under‐utilized large pore cavities of MOFs has been extensively explored as a promising strategy to further enhance the hydrogen storage properties of MOFs. Here, we described a simple methodology to enhance the hydrogen uptake properties of RHA incorporated MIL‐101 (RHA‐MIL‐101, where RHA is rice husk ash—a waste material) by controlled doping of Li⁺ ions. The hydrogen gas uptake of Li‐doped RHA‐MIL‐101 is significantly higher (up to 72 %) compared to the undoped RHA‐MIL‐101, where the content of Li⁺ ions doping greatly influenced the hydrogen uptake properties. We attributed the observed enhancement in the hydrogen gas uptake of Li‐doped RHA‐MIL‐101 to the favorable Li⁺ ion‐to‐H₂ interactions and the cooperative effect of silanol bonds of silica‐rich rice‐husk ash incorporated in MIL‐101.     

A Halogen‐Bonding Bis‐triazolium Rotaxane for Halide‐Selective Anion Recognition

A systematic study on the anion‐binding properties of acyclic halogen‐ and hydrogen‐bonding bis‐triazolium carbazole receptors is described. The halide‐binding potency of halogen‐bonding bis‐iodotriazolium carbazole receptors was found to be far superior to their hydrogen‐bonding bis‐triazolium‐based analogues. This led to the synthesis of a mixed halogen‐ and hydrogen‐bonding rotaxane host containing a bis‐iodotriazolium carbazole axle component. The rotaxane’s anion recognition properties, determined by ¹H NMR titration experiments in a competitive aqueous solvent mixture, demonstrated the preorganised halogen‐bonding interlocked host cavity to be halide‐selective, with a strong binding affinity for bromide.     

Carboxylic‐functionalized water soluble π‐conjugated polymer: Highly selective and efficient chemosensor for mercury(II) ions

Here, we report a new carboxylic‐functionalized water soluble π‐conjugated polymer for selective detection of highly toxic Hg²⁺ in neutral pH condition. carboxylic‐functionalized thiophene containing oligophenylenevinylene was synthesized and polymerized under oxidative route to obtain water soluble polymer. Free carboxylic groups present in the π‐conjugated materials provide opportunity to use pH as external stimuli for studying secondary interaction such as hydrogen bonding and aromatic π‐stacking of the chromophores. The pH changes strongly influence on the molecular interactions in the monomer, whereas the long chain polymer was less disturbed. The polymer showed high selectivity for detecting Hg²⁺ ions compared with any other transition metal ions in water. The detection efficiency of the polymer was found almost 40 times higher than that of its monomeric unit. Stern‐Volmer constant for the Hg²⁺ ion sensing was determined through concentration dependent studies as 6.4 × 10⁵ M^?1. The carboxylic‐functionalized polymer showed reversibility in the metal‐ion detecting capabilities which was further investigated by NaCl complexation with Hg²⁺ complex. Both funneling of excitation energy to the Hg²⁺ center and also excitation energy migration through chain π‐conjugated backbone were correlated to the superior sensing characteristics of the polymer compared to its monomeric counterpart. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5144–5157, 2009     

Chloride‐Anion‐Templated Synthesis of a Strapped‐Porphyrin‐Containing Catenane Host System

The synthesis, structure and anion‐recognition properties of a new strapped‐porphyrin‐containing [2]catenane anion host system are described. The assembly of the catenane is directed by discrete chloride anion templation acting in synergy with secondary aromatic donor–acceptor and coordinative pyridine–zinc interactions. The [2]catenane incorporates a three‐dimensional, hydrogen‐bond‐donating anion‐binding pocket; solid‐state structural analysis of the catenane?chloride complex reveals that the chloride anion is encapsulated within the catenane’s interlocked binding cavity through six convergent CH????Cl and NH???Cl hydrogen‐bonding interactions and solution‐phase ¹H NMR titration experiments demonstrate that this complementary hydrogen‐bonding arrangement facilitates the selective recognition of chloride over larger halide anions in DMSO solution.     

Design of conjugated microporous polymer nanotubes for efficient benzene molecular adsorptions

Single‐walled conjugated microporous polymer (CMP) nanotubes containing alternative phenylene and ethynylene units were described computationally for the first time in this work. The electronic structures and adsorption properties were studied by the density‐functional tight‐binding method augmented with a van der Waals dispersion term. Our calculations show that the morphology of CMP influences the benzene‐adsorption performance significantly. The tubes show smaller binding energies to benzene molecule than the film counterparts, consistent with the observation of low adsorption capacities of tubular materials in our experiments. Enlarging the linker or adding substituents in the node can both reduce the tube's band gap. The introduction of  OH or  NH₂ substituents in the tube node increases the binding strength between the adsorbent and the adsorbate, which is energetically favorable to enhance the adsorption capacity. Our results are expected to provide theoretical insights into the rational design of novel CMP nanotubes with improved adsorption capacities for organics.     

Reversible Doping of a Dithienothiophene‐Based Conjugated Microporous Polymer

Dithienothiophene (DTT) based conjugated microporous polymers (CMPs) were synthesized by bulk and electrochemical oxidative polymerizations. Spectroelectrochemical measurements showed that DTT‐CMP can be reversibly oxidized and reduced, accompanied by a significant change of the absorption properties making the material interesting for electrochromic devices. Reversible doping and dedoping of the bulk polymer network was also observed using iodine and ammonia, respectively. Nitrogen gas sorption measurements of the neutral, doped, and dedoped polymer networks indicated the presence of iodide species within the pores, and the conductivity of the networks is highly increased upon doping with iodine. The introduction of the strong electron donor DTT into a conjugated porous network, and the ability for redox switching, make DTT‐CMPs interesting materials for organo(opto)electronic devices and sensors.     

Synthesis of Two‐dimensional Microporous Carbonaceous Polymer Nanosheets and Their Application as High‐performance CO2 Capture Sorbent

The synthesis of two‐dimensional (2D) polymer nanosheets with a well‐defined microporous structure remains challenging in materials science. Here, a new kind of 2D microporous carbonaceous polymer nanosheets was synthesized through polymerization of a very low concentration of 1,4‐dicyanobenzene in molten zinc chloride at 400–500 °C. This type of nanosheets has a thickness in the range of 3–20 nm, well‐defined microporosity, a high surface area (～537 m² g^?1), and a large micropore volume (～0.45 cm³ g^?1). The microporous carbonaceous polymer nanosheets exhibit superior CO₂ sorption capability (8.14 wt % at 298 K and 1 bar) and a relatively high CO₂ selectivity toward N₂ (25.6). Starting from different aromatic nitrile monomers, a variety of 2D carbonaceous polymer nanosheets can be obtained showing a certain universality of the ionothermal method reported herein.     

A Nitrogen‐Rich 2D sp2‐Carbon‐Linked Conjugated Polymer Framework as a High‐Performance Cathode for Lithium‐Ion Batteries

A two‐dimensional (2D) sp²‐carbon‐linked conjugated polymer framework (2D CCP‐HATN) has a nitrogen‐doped skeleton, a periodical dual‐pore structure and high chemical stability. The polymer backbone consists of hexaazatrinaphthalene (HATN) and cyanovinylene units linked entirely by carbon–carbon double bonds. Profiting from the shape‐persistent framework of 2D CCP‐HATN integrated with the electrochemical redox‐active HATN and the robust sp² carbon‐carbon linkage, 2D CCP‐HATN hybridized with carbon nanotubes shows a high capacity of 116 mA h g^?1, with high utilization of its redox‐active sites and superb cycling stability (91 % after 1000 cycles) and rate capability (82 %, 1.0 A g^?1 vs. 0.1 A g^?1) as an organic cathode material for lithium‐ion batteries.     

Rigid Coplanar Polymers for Stable n‐Type Polymer Thermoelectrics

Low n‐doping efficiency and inferior stability restrict the thermoelectric performance of n‐type conjugated polymers, making their performance lag far behind of their p‐type counterparts. Reported here are two rigid coplanar poly(p‐phenylene vinylene) (PPV) derivatives, LPPV‐1 and LPPV‐2 , which show nearly torsion‐free backbones. The fused electron‐deficient rigid structures endow the derivatives with less conformational disorder and low‐lying lowest unoccupied molecular orbital (LUMO) levels, down to ?4.49 eV. After doping, two polymers exhibited high n‐doping efficiency and significantly improved air stability. LPPV‐1 exhibited a high conductivity of up to 1.1 S cm^?1 and a power factor as high as 1.96 μW m^?1 K^?2. Importantly, the power factor of the doped LPPV‐1 thick film degraded only 2 % after 7 day exposure to air. This work demonstrates a new strategy for designing conjugated polymers, with planar backbones and low LUMO levels, towards high‐performance and potentially air‐stable n‐type polymer thermoelectrics.     

Synthesis of π‐conjugated polymer containing both thiophene and phosphole sulfide in the main chain by simultaneous post‐element transformation of organotitanium polymer

The synthesis and unique optoelectronic features of a π‐conjugated polymer containing both thiophene and 1‐phenylphosphole sulfide units (multiple heteroles) in the main chain by the post‐element transformation of a regioregular organometallic polymer possessing titanacyclopentadiene‐2,5‐diyl unit are described. The π‐conjugated polymer containing multiple heteroles was obtained in 73% yield by the simultaneous reaction of the organotitanium polymer with sulfur monochloride and dichlorophenylphosphine (0.6 equiv each), whose number‐average molecular weight (M_n) and the molecular‐weight distribution (M_w/M_n) were estimated to be 11,000 and 3.4, respectively, by the size exclusion chromatography (SEC). The π‐conjugated polymer thus obtained was found to have the high HOMO and the low LUMO energy levels due to the electron‐rich thiophene and electron‐deficient phosphole sulfide units, respectively, as supported by its cyclic voltammetry (CV) analysis. Compared to a mixture of a polymer containing sole thiophene‐unit and that containing sole phosphole sulfide units, the π‐conjugated polymer‐containing multiple heteroles proved to exhibit interesting optical properties. For example, a specific emission peak was observed at 608 nm in the photoluminescence spectrum, which was not observed in the case of the thiophene‐containing polymer, the phosphole‐containing polymer, and their mixture. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2519–2525     

Synthesis and characterization of a main‐chain‐type conjugated copolymer containing rare earth with photocrosslinkable group

In this article, we report the design, synthesis, and characterization of a new main‐chain‐type rare earth‐containing conjugated polymer with photocrosslinkable group. The polymer is crosslinked photochemically by the addition of a photoinitiator to yield an absolute insoluble network. The optical properties of the resulting conjugated polymer were characterized in solution, film state, and after photocrosslinking. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 388–394, 2007.     

Spacer‐length‐dependent association in polymers with multiple‐hydrogen‐bonded end groups

Herein, we investigate the influence of spacer length on the homoassociation and heteroassociation of end‐functionalized hydrogen‐bonding polymers based on poly(n‐butyl acrylate). Two monofunctional ureido‐pyrimidinone (UPy) end‐functionalized polymers were prepared by atom transfer radical polymerization using self‐complementary UPy‐functional initiators that differ in the spacer length between the multiple‐hydrogen‐bonding group and the chain initiation site. The self‐complementary binding strength (K_dim) of these end‐functionalized polymers was shown to depend critically on the spacer length as evident from ¹H NMR and diffusion‐ordered spectroscopy. In addition, the heteroassociation strength of the end‐functionalized UPy polymers with end‐functionalized polymers containing the complementary 2,7‐diamido‐1,8‐naphthyridine (NaPy) hydrogen‐bond motif is also affected when the aliphatic spacer length is too short. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Color tunability in non‐doped single‐layer PLEDs from a carbazole‐based electroluminescent polymer

A conjugated polymer with a carbazole moiety, poly(3,6‐divinylene‐N‐octyl‐carbazole‐p‐phenylene), was synthesized by Wittig reaction. The polymer can be dissolved in common organic solvents such as THF, chloroform, etc. Using this polymer as an active layer, single‐layer non‐doped PLEDs with different thicknesses were fabricated by a spin‐coating approach. The results suggested that electroluminescence spectra are changed with the film thickness of the polymer emitter. Fortunately, CIE 1931 coordinate values are moved to the white‐light region only by changing the film thickness. Copyright © 2008 John Wiley & Sons, Ltd.     

Siloxane‐Based Hybrid Semiconducting Polymers Prepared by Fluoride‐Mediated Suzuki Polymerization

Siloxane‐containing materials are a large and important class of organic‐inorganic hybrids. In this report, a practical variation of the Suzuki polymerization to generate semiconducting polymeric hybrids based on siloxane units, which proceeds under essentially nonbasic conditions, is presented. This method generates solution‐processable poly(diketopyrrolopyrrole‐alt‐benzothiadiazole) (PDPPBT‐Si) consisting of the hybrid siloxane substituents, which could not be made using conventional methods. PDPPBT‐Si exhibits excellent ambipolar transistor performance with well‐balanced hole and electron FET mobilities. The siloxane‐containing DPP‐thiophene polymer classes (PDPP3T‐Si and PDPP4T‐Si), synthesized by this method, exhibit high hole mobility of up to 1.29 cm² V^?1 s^?1. This synthetic approach should provide access to a variety of novel siloxane‐containing conjugated semiconductor classes by using a variety of aryldihalides and aryldiboronic acids/esters.