Effect of Complexation on Photocatalytic Degradation of Dissolved Organic Nitrogen Compounds

Abstract

The effect of metal ions on TiO₂ mediated photocatalytic oxidation for the determination of dissolved organic nitrogen compounds is investigated. Ethylenediaminetetraaceticacid was chosen as a model molecule for DON compounds. At pH 2, 5, 7, and 10 aqueous EDTA solutions were irradiated at 254 nm in the presence of Fe²⁺, Cu²⁺, Zn²⁺, Ni²⁺ or Co²⁺ ions. The sum of produced nitrate, nitrite, and ammonium ion concentrations gave the total oxidation recovery. At low pH, the photocatalytic oxidation recoveries of Fe‐EDTA, Ni‐EDTA, and Co‐EDTA were significantly lower than the photocatalytic degradation of EDTA. The presence of free Fe²⁺, Ni²⁺, and Co²⁺ ions decreased the photocatalytic oxidation recovery. The [NH₄ ⁺]/[NO₃ ^?] ratio was higher for Cu‐EDTA.     

Surface Modification of Gold by Quercetin Monolayer for the Electrochemical Determination of Copper(II)

A quercetin monolayer has been prepared on top of the self‐assembled 3‐mercaptopropionic acid (MPA) layer for the copper ion determination. Cu²⁺ ions are readily accumulated on this modified electrode through the complex formation and electrochemically detected. With a quercetin layer, the redox process of Cu²⁺ became more reversible than at the MPA‐modified electrode. Complexation sites in MPA and quercetin were occupied within five min when the electrode was immersed in 10 μM Cu²⁺ solution. The MPA and quercetin layers were stable enough to allow repeated EDTA treatment to remove adsorbed Cu²⁺ for the surface regeneration. Only 7% decrease was found after ten times regeneration and use. Linear current response was found over the concentration range of 1 nM and 10 μM with detection limit of 0.1 nM. Common interfering ions such as Cd²⁺, Zn²⁺, and Fe^2+/3+ did not show any electrochemical response in the potential range of Cu²⁺ determination.     

Determination of conditional stability constants for some divalent transition metal ion‐EDTA complexes by electrospray ionization mass spectrometry

Conditional stability constants of coordination complexes comprising divalent transition metals, Cu²⁺, Ni²⁺, Zn²⁺, Co²⁺, and ethylenediaminetetraacetic acid (EDTA) were determined utilizing electrospray ionization mass spectrometry. The deviation of signal response of a reference complex was monitored at addition of a second metal ion. The conditional stability constant for the competing metal was then determined through solution equilibria equations. The method showed to be applicable to a system where Co²⁺ and Zn²⁺ competed for EDTA at pH 5. When Cu²⁺ and Ni²⁺ competed for EDTA, the equilibrium changed over time. This change was shown to be affected in rate and size by the type of organic solvent added. In this work, 30% of either methanol or acetonitrile was used. It was found that if calibration curves are prepared for both metal complexes in solution and the measurements are repeated with sufficient time space, any change in equilibrium of sample solutions will be discovered. Copyright © 2014 John Wiley & Sons, Ltd.     

Hydrothermal synthesis and extended structure of poly[aqua(μ5‐ethylenediaminetetraacetato)dizinc(II)]

In the extended structure of the title compound, [Zn₂(C₁₀H₁₂N₂O₈)(H₂O)], prepared under hydrothermal conditions, there are two distinct Zn^II sites. The first, with octahedral geometry, bonds to two N and three O atoms from one ethylenediaminetetraacetate tetraanion (EDTA) and one water molecule. The second, with tetrahedral geometry, coordinates to O atoms from four different EDTA ligands. The EDTA ligand almost encapsulates the octahedral Zn^II ion and binds to four symmetry‐related tetrahedral Zn^II ions, hence generating the extended structure. One noncoordinated O‐atom site on the EDTA ligand connects to the water molecule by hydrogen bonding. Structural comparisons are made with other compounds containing zinc, EDTA and water.     

Metal‐Ion‐Promoted Electron Transfer between Tetrathiafulvalene and Quinone Units Within a Calix[4]arene Framework and Tuning through Coordination of the Neighboring Crown Ether with a Sodium Cation

A new calix[4]arene 1 with tetrathiafulvalene (TTF), quinone, and crown ether units in the lower rim was designed and synthesized with the aim to investigate the possibility to tune the metal‐ion promoted electron transfer by coordination of the crown ether unit with additional metal ions. Both absorption and electron spin resonance (ESR) spectroscopic studies clearly indicate that electron transfer occurs efficiently from TTF to the quinone units in the presence of Sc³⁺/Pb²⁺/Zn²⁺. Moreover, the intramolecular electron transfer within 1 induced by Zn²⁺ can be switched off by addition of Na⁺ and further turned on by addition of either Sc³⁺ or Pb²⁺.     

A New Fluorescent Chemosensor for Cu2+ Based on 1,2,3,4,5,6,7,8,9,10‐Decahydroacridine‐1,8‐dione Fluorophore

A new chemosensor for Cu²⁺ was synthesized based on 1,2,3,4,5,6,7,8,9,10‐decahydroacridine‐1,8‐dione dyes, which exhibited an obvious fluorescent selectivity to the sensing of Cu²⁺ ions over other cations, such as Na⁺, K⁺, Ca²⁺, Cd²⁺, Co²⁺, Hg²⁺, Mg²⁺, Mn²⁺, Ni²⁺, Zn²⁺, Ag⁺ and Pb²⁺. Moreover, it presented a fluorescent switch function when EDTA was added to the compound‐Cu²⁺ complex in examined systems.     

Benzenesulfonamidoquinolino‐β‐cyclodextrin as a Cell‐Impermeable Fluorescent Sensor for Zn2+

A water‐soluble benzenesulfonamidoquinolino‐β‐cyclodextrin has been successfully synthesized in 30 % yield by incorporating a N‐(8‐quinolyl)‐p‐aminobenzenesulfonamide (HQAS) group to β‐cyclodextrin through a flexible linker. This compound exhibits a good fluorescence response in the presence of Zn²⁺ in water but gives poor fluorescence responses with other metal ions commonly present in a physiological environment under similar conditions. Fluorescence microscopic and two‐dimensional NMR experiments showed that benzenesulfonamidoquinolino‐β‐cyclodextrin could bind to the loose bilayer membranes. As a result, benzenesulfonamidoquinolino‐β‐cyclodextrin was found to act as an efficient cell‐impermeable Zn²⁺ probe, showing a specific fluorescent sensing ability to Zn²⁺‐containing damaged cells whilst exhibiting no response in the presence of healthy cells.     

Differential Pulse Polarography of the Zn2+ Complexation by Glutathione Fragments Cys‐Gly and gamma‐Glu‐Cys

The metal binding properties of glutathione (GSH) and their fragments γ‐Glu‐Cys and Cys‐Gly are of biological and environmental interest. In this work a differential pulse polarographic study of the Zn²⁺/γ‐Glu‐Cys and Zn²⁺/Cys‐Gly systems was carried out for a better understanding of the results obtained in previous studies on the Zn²⁺‐GSH system. In the case of γ‐Glu‐Cys, complexation with Zn²⁺ was not detected. In the case of Cys‐Gly, the parallel analysis, by multivariate curve resolution with alternating least squares, of data from the titration of peptide with metal and of metal with peptide suggested the presence of two types of bound Zn²⁺. This could be attributed to Zn²⁺ strongly bound to two sulfur atoms of two peptides, to form a complex of 1 : 2 stoichiometry, and to Zn²⁺ weakly bound to carboxylate and/or amino groups.     

Design and Synthesis of a Highly Sensitive Off–On Fluorescent Chemosensor for Zinc Ions Utilizing Internal Charge Transfer

Fluorescence imaging is a powerful tool for the visualization of biological molecules in living cells, tissue slices, and whole bodies, and is important for elucidating biological phenomena. Furthermore, zinc (Zn²⁺) is the second most abundant heavy metal ion in the human body after iron, and detection of chelatable Zn²⁺ in biological studies has attracted much attention. Herein, we present a novel, highly sensitive off–on fluorescent chemosensor for Zn²⁺ by using the internal charge transfer (ICT) mechanism. The rationale of our approach to highly sensitive sensor molecules is as follows. If fluorescence can be completely quenched in the absence of Zn²⁺, chemosensors would offer a better signal‐to‐noise ratio. However, it is difficult to quench the fluorescence completely before Zn²⁺ binding, and most sensor molecules still show very weak fluorescence in the absence of Zn²⁺. But even though the sensor shows a weak fluorescence in the absence of Zn²⁺, this fluorescence can be further suppressed by selecting an excitation wavelength that is barely absorbed by the Zn²⁺‐free sensor molecule. Focusing on careful control of ICT within the 4‐amino‐1,8‐naphthalimide dye platform, we designed and synthesized a new chemosensor ( 1 ) that shows a pronounced fluorescence enhancement with a blueshift in the absorption spectrum upon addition of Zn²⁺. The usefulness of 1 for monitoring Zn²⁺ changes was confirmed in living HeLa cells. There have been several reports on 4‐amino‐1,8‐naphthalimide‐based fluorescent sensor molecules. However, 1 is the first Zn²⁺‐sensitive off–on fluorescent sensor molecule that employs the ICT mechanism; most off–on sensor molecules for Zn²⁺ employ the photoinduced electron transfer (PeT) mechanism.     

An aminoquinoline based fluorescent probe for sequential detection of Znic (II) and inorganic phosphate and application in living cell imaging

A novel fluorescent probe 5‐(diethylamino)‐2‐(((2‐(hydroxymethyl)quinolin‐8‐yl)imino)methyl)phenol ( QS) was synthesized by condensation reaction of 8‐aminoquinoline derivative and 4‐(diethylamino)salicylaldehyde. It was found that the probe QS was capable of high selectivity and sensitivity about specific color and fluorescence changes towards Zn²⁺ ion in EtOH‐H₂O (v/v = 4/1, 0.01 M, Tris–HCl buffer, pH = 7.30) solution. The interaction of QS with Zn²⁺ ion illustrated a “turn‐on” fluorescence response at 550 nm (λ_ex: 458 nm), moreover, after the subsequent addition of inorganic phosphate (Pi) into the solution above, a “turn‐off” fluorescence response was observed. The sensing ability of the probe QS towards Zn²⁺ was confirmed by fluorescence titration, UV–Vis titration and HRMS analysis. Besides, the intracellular sensing behavior of QS with Zn²⁺ and Pi were captured in living PC12 cells. The limit of detection (LOD) for Zn²⁺ and Pi sensing was found to be 0.03 μM and 0.08 μM, respectively.     

Terpy(Pt–salphen)2 Switchable Luminescent Molecular Tweezers

The design and synthesis of switchable molecular tweezers based on a luminescent terpy(Pt‐salphen)₂ ( 1 ; terpy=terpyridine) complex is reported. Upon metal coordination, the tweezers can switch from an open “W”‐shaped conformation to a closed “U”‐shaped form that is adapted for selective recognition of cations. Closing of the tweezers by metal coordination (M=Zn²⁺, Cu²⁺, Pb²⁺, Fe²⁺, Hg²⁺) was monitored by ¹H NMR and/or UV/Vis titrations. During the titration, exclusive formation of the 1:1 complex [M( 1 )] was observed, without appearance of an intermediate 1:2 complex [M( 1 )₂]. The crystallographic structure of the 1:1 complex was obtained with Pb²⁺ and showed a distorted helical structure. Selective intercalation of Hg²⁺ cations by the closed “U” form was observed. The tweezers were reopened by selective metal decoordination of the terpyridine ligand by using tris(2‐aminoethyl)amine (tren) as a competitive ligand without modification of the Pt–salphen complex. Detailed photophysical studies were performed on the open and closed tweezers. Structured emission was observed in the open form from the Pt–salphen moieties, with a high quantum yield and a long lifetime. The emission is slightly modified upon closing with 1 equivalent of Zn²⁺ or Hg²⁺, whereas a dramatic quenching was obtained upon intercalation of additional Hg²⁺.     

Qualitative and quantitative 1H NMR spectroscopy for determination of divalent metal cation concentration in model salt solutions,food supplements,and pharmaceutical products by using EDTA as chelating agent

This paper introduces an ¹H NMR method to identify individual divalent metal cations Be²⁺, Mg²⁺, Ca²⁺, Sr²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Sn²⁺, and Pb²⁺ in aqueous salt solutions through their unique signal shift and coupling after complexation with the salt of ethylenediaminetetraacetic acid (EDTA). Furthermore, quantitative determination applied for the divalent metal cations Ca²⁺, Mg²⁺, Hg²⁺, Sn²⁺, Pb²⁺, and Zn²⁺ (limit of quantification: 5–22 μg/ml) can be achieved using an excess of EDTA with aqueous model salt solutions. An internal standard is not required because a known excess of EDTA is added and the remaining free EDTA can be used to recalculate the quantity of chelated metal cations. The utility of the method is demonstrated for the analysis of divalent cations in some food supplements and in pharmaceutical products.     

Carbohydrate-Derived Metal-Chelator-Triggered Lipids for Liposomal Drug Delivery

Liposomes are versatile three-dimensional, biomaterial-based frameworks that can spatially enclose a variety of organic and inorganic biomaterials for advanced targeted-delivery applications. Implementation of external-stimuli-controlled release of their cargo will significantly augment their wide application for liposomal drug delivery. This paper presents the synthesis of a carbohydrate-derived lipid, capable of changing its conformation depending on the presence of Zn²⁺: an active state in the presence of Zn²⁺ ions and back to an inactive state in the absence of Zn²⁺ or when exposed to Na₂EDTA, a metal chelator with high affinity for Zn²⁺ ions. This is the first report of a lipid triggered by the presence of a metal chelator. Total internal reflection fluorescence microscopy and a single-liposome study showed that it indeed was possible for the lipid to be incorporated into the bilayer of stable liposomes that remained leakage-free for the fluorescent cargo of the liposomes. On addition of EDTA to the liposomes, their fluorescent cargo could be released as a result of the membrane-incorporated lipids undergoing a conformational change.     

Adsorption of zinc(II) on hydrous iron oxides

The adsorption of Zn²⁺ ions on amorphous Fe(OH)₃ and -Fe₂O₃, as a function of pH, has been investigated. In the pH region corresponding to the formation of positively charged Zn-hydroxy complexes, an abrupt increase in adsorption was observed. The influence of EDTA and glycine on the adsorption of Zn²⁺ by -Fe₂O₃ has also been investigated. Strong suppression of the adsorption of Zn²⁺ was observed for high [EDTA or Gly]/[Zn²⁺] concentration ratios. The results of the adsorption of Zn²⁺ in the presence of an organic ligand were explained by the formation of Zn-EDTA or Zn-glycine complexes and also by the occupation of adsorption sites by the free organic ligand.     

Remarkable Reinforcement of a Supramolecular Gel Constructed by Heteroditopic [18]Crown‐6‐Based Molecular Recognition

The heteroditopic crown ether‐based ligand 1 containing the diazafluorenylimino group as a binding site for the Zn²⁺ and Cs⁺ was synthesized. The ligand 1 can be gelated in DMSO/water with and without Cs⁺ in the presence of the Zn²⁺ ion. Interestingly, the remarkable gelation reinforcement of gel 1 occurred with Cs⁺ in the presence of Zn²⁺, which is due to the formation of a sandwich complex. According to DFT calculations, one Zn²⁺ is bound to two diazafluorenylimino moieties in a tetrahedral structure. In addition, one Cs⁺ ion is bound to two crown‐rings. The Zn²⁺‐diazafluorenylimino ligand gel without Cs⁺ shows a spherical structure with 250–800 nm diameter, whereas the Zn²⁺‐diazafluorenylimino‐based ligand gel with Cs⁺ shows a fiber structure with 60–70 nm diameter and several micrometers of lengths. The rheological properties of the Zn²⁺‐ diazafluorenylimino‐based ligand gel were strongly dependent on the presence of Cs⁺.     

A turn-on and reversible fluorescence sensor with high affinity to Zn in aqueous solution

A new simple receptor 1 based on aminosalicylimine was prepared. It exhibited an ‘off–on fluorescence type’ mode with high sensitivity in the presence of Zn²⁺. In particular, this chemosensor could clearly distinguish Zn²⁺ from Cd²⁺. Also, it could be a reusable chemosensor because the addition of EDTA quenched the fluorescence of the Zn²⁺-2·1 complex. Furthermore, receptor 1 had a sufficiently low detection limit (68 nM) in aqueous solutions, which implies that 1 could sense the nanomolar concentration of Zn²⁺. Therefore, this sensor has the ability to be a practical system for the monitoring of Zn²⁺ concentrations in aqueous samples.     

The amplified circularly polarized luminescence emission response of chiral 1,1′‐binaphthol‐based polymers via Zn(II)‐coordination fluorescence enhancement

Two kinds of chiral 1,1′‐binaphthol (BINOL)‐based polymer enantiomers were designed and synthesized by the polymerization of 5,5′‐((2,2′‐bis (octyloxy)‐[1,1′‐binaphthalene]‐3,3′‐diyl)bis(ethyne‐2,1‐diyl))bis(2‐hydroxybenzaldehyde) ( M1 ) with alkyl diamine ( M2 ) via nucleophilic addition–elimination reaction. The resulting chiral polymers can exhibit mirror image cotton effects either in the absence or in the presence of Zn²⁺ ion. Almost no fluorescence or circularly polarized luminescence (CPL) emission could be observed for two chiral BINOL‐based polymer enantiomers in the absence of Zn²⁺. Interestingly, the chiral polymers can show strong fluorescence and CPL response signals upon the addition of Zn²⁺, which can be attributed to Zn²⁺‐coordination fluorescence enhancement effect. This work can develop a new strategy on the design of the novel CPL materials via metal‐coordination reaction. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1282–1288     

A Coated Graphite Thorium‐Ion Selective Potentiometric Sensor Based on a Calix[4]arene Bearing Phosphoryl Groups

5,11,17,23‐Tetra‐tert‐butyl‐25,26,27,28‐tetrakis(diphenylphosphinoylmethoxy)calix[4]arene ( 1 )has been used for the preparation of a graphite coated thorium ion‐selective electrode (Th⁴⁺‐ISE). The plasticized PVC membrane containing 30% PVC, 58% ortho‐nitrophenyloctylether (NPOE), 4% sodium tetraphenylborate (NaTPB) and 8% ionophore was directly coated on a graphite rod. This sensor gave good Nernstian responses with a slope of 15.5 ± 0.1 mV/decade over a concentration range of 1 × 10^?5 ?1 × 10^?3 M of thorium ions with a limit of detection of 7.9 × 10^?6 M. The dynamic response time of the electrode to achieve a steady potential was found to be about 15 seconds. The potential of the prepared sensor was independent of the pH variation in the range 2.3–4.0. The selectivity relative to several mono‐, di‐ and tri‐valent metal ions, i.e. Li⁺, Na⁺, K⁺, Ag⁺, NH₄⁺, Sr²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, La³⁺, Sm³⁺, Dy³⁺, Er³⁺ and Y³⁺ was examined. This electrode can be used for 6 months without any considerable divergences in the potential response. The sensor was successfully used as an indicator electrode for the potentiometric titration of a thorium solution using a standard solution of EDTA.     

Gold nanoparticle-based colorimetric sensor for studying the interactions of β-amyloid peptide with metallic ions

In this paper, a kind of β-amyloid peptide (Aβ1-16) conjugated gold nanoparticles (Aβ1-16@GNPs) are prepared and employed as colorimetric indicator for studying the interaction of β-amyloid peptide with metallic ions (e.g. Zn²⁺ and Ca²⁺). In the presence of Zn²⁺, mono-dispersing Aβ1-16@GNPs enable to form aggregates or attach on the SHG-44 (human glioma cell) cellular surface which results in significant color change of the solution. The experimental results indicate that Zn²⁺ can interact with Aβ1-16 and form Zn²⁺-β-amyloid peptide complexes. In particular, in the presence of Zn²⁺, a time-dependent interaction of cells with Aβ1-16@GNPs has been observed that may suggest different expression levels of β-amyloid peptide related proteins in various cell cycles. In addition, the aggregating/binding process can be easily reversed by adding EDTA, a good chelated ligand of Zn²⁺, which gives further proof of the interaction mechanism.     

Dual Control of Peptide Conformation with Light and Metal Coordination

The design of a stimuli-responsive peptide whose conformation is controlled by wavelength-specific light and metal coordination is described. The peptide adopts a defined tertiary structure and its conformation can be modulated between an α-helical coiled coil and β-sheet. The peptide is designed with a hydrophobic interface to induce coiled coil formation and is based on a recently described strategy to obtain switchable helix dimers. Herein, we endowed the helix dimer with 8-hydroxyquinoline (HQ) groups to achieve metal coordination and shift to a β-sheet structure. It was found that the conformational shift only occurs upon introduction of Zn²⁺; other metal ions (Cu²⁺, Fe³⁺, Co²⁺, Mg², and Ni²⁺) do not offer switching likely due to non-specific metal-peptide coordination. A control peptide lacking the metal-coordinating residues does not show conformational switching with Zn²⁺ supporting the role of this metal in stabilizing the β-sheet conformation in a defined manner.