Synthesis and optical properties of cis‐dibenzothiazolyldibenzo‐24‐crown‐8

New crown ether carrying two fluorionophores of cis‐dibenzothiazolyldibenzo‐24‐crown‐8 was synthesized from cis‐diformyldibenzo‐24‐crown‐8 and 2‐aminobenzenethiol. The binding behavior and the optical properties of the crown ether were examined through UV‐visible spectroscopy and fluorescence spectroscopy. When complexed with Na⁺, K⁺, Rb⁺, and Cs⁺ ions, it led to intramolecular charge transfer and caused the changes of the fluorescence spectra. The protonation of the crown ether was also studied. With protonation using CF₃COOH, the absorption bands and the fluorescence spectroscopy changed, the maximal fluorescence wavelengths red shifted and the fluorescence intensity with the maximum at 433 nm enhanced strongly. J. Heterocyclic Chem., (2011).     

Molecular‐Recognition‐Assisted pKa Shifts and Metal‐Ion‐Induced Fluorescence Regeneration in p‐Sulfonatocalix[6]arene‐Encapsulated Acridine

The host–guest interactions of cationic (AcH⁺) and neutral (Ac) forms of the dye acridine with the macrocyclic host p‐sulfonatocalix[6]arene (SCX6) were investigated by using ground‐state absorption, steady‐state and time‐resolved fluorescence, and NMR measurements. The cationic form undergoes significant complexation with SCX6 (K_eq=2.5×10⁴ M ^?1), causing a sharp decrease in the fluorescence intensity and severe quenching in the excited‐state lifetime of the dye. The strong binding of the AcH⁺ form of the dye with SCX6 is attributed to ion–ion interactions involving the sulfonato groups (SO₃^?) of SCX6 and the positively charged AcH⁺ at pH of approximately 4.3. Whereas, the neutral Ac form of the dye undergoes weak complexation with SCX6 (K_eq=0.9×10³ M ^?1) and the binding constant is lowered by one order of magnitude compared with that of the SCX6–AcH⁺ system. The strong affinity of SCX6 to the protonated form leads to a large upward pK_a shift (≈2 units) in the dye. In contrast, strong emission quenching upon SCX6 interaction and the regeneration of fluorescence intensity of the dye in the presence of Gd³⁺ through competitive binding have also been demonstrated.     

A Highly Selective Mitochondria‐Targeting Fluorescent K+ Sensor

Regulation of intracellular potassium (K⁺) concentration plays a key role in metabolic processes. So far, only a few intracellular K⁺ sensors have been developed. The highly selective fluorescent K⁺ sensor KS6 for monitoring K⁺ ion dynamics in mitochondria was produced by coupling triphenylphosphonium, borondipyrromethene (BODIPY), and triazacryptand (TAC). KS6 shows a good response to K⁺ in the range 30–500 mM , a large dynamic range (F_max/F₀≈130), high brightness (?_f=14.4 % at 150 mM of K⁺), and insensitivity to both pH in the range 5.5–9.0 and other metal ions under physiological conditions. Colocalization tests of KS6 with MitoTracker Green confirmed its predominant localization in the mitochondria of HeLa and U87MG cells. K⁺ efflux/influx in the mitochondria was observed upon stimulation with ionophores, nigericin, or ionomycin. KS6 is thus a highly selective semiquantitative K⁺ sensor suitable for the study of mitochondrial potassium flux in live cells.     

Ions Can Move a Proton‐Coupled Electron‐Transfer Reaction into Tunneling Regime

The effects of charged species on proton‐coupled electron‐transfer (PCET) reaction should be of significance for understanding/application of important chemical and biological PCET systems. Such species can be found in proximity of activated complex in a PCET reaction, although they are not involved in the charge transfer process. Reported here is the first study of the above‐mentioned effects. Here, the effects of Na⁺, K⁺, Li⁺, Ca²⁺, Mg²⁺, and Me₄N⁺ observed in PCET reaction of ascorbate monoanions with hexacyanoferrate(III) ions in H₂O reveal that, in presence of ions, this over‐the‐barrier reaction entered into tunneling regime. The observations are: a) dependence of the rate constant on the cation concentration, where the rate constant is 71 (at I = 0.0023), and 821 (at 0.5M K⁺), 847 (at 1.0M Na⁺), and 438 M ^?1 s^?1 (at 0.011M Ca²⁺); b) changes of kinetic isotope effect (KIE) in the presence of ions, where k_H/k_D=4.6 (at I = 0.0023), and 3.4 (in the presence of 0.5M K⁺), 3.3 (at 1.0M Na⁺), 3.9 (at 0.001M Ca²⁺), and 3.9 (at 0.001M Mg²⁺), respectively; c) the isotope effects on Arrhenius pre‐factor where A_H/A_D=0.97 (0.15) in absence of ions, and 2.29 (0.60) (at 0.5M Na⁺), 1.77 (0.29) (at 1.0M Na⁺), 1.61 (0.25) (at 0.5M K⁺), 0.42 (0.16) (at 0.001M Ca²⁺) and 0.16 (0.19) (at 0.001M Mg²⁺); d) isotope differences in the enthalpies of activation in H₂O and in D₂O, where ΔΔH^?(D,H)=3.9 (0.4) kJ mol^?1 in the absence of cations, 1.3 (0.6) at 0.5M Na⁺, 1.8 (0.4) at 0.5M K⁺, 1.5 (0.4) at 1.0M Na⁺, 5.5 (0.9) (at 0.001M Ca²⁺), and 7.9 (2.8) (at 0.001M Mg²⁺) kJ mol^?1; e) nonlinear proton inventory in reaction. In the H₂O/dioxane 1 : 1, the observed KIE is 7.8 and 4.4 in the absence and in the presence of 0.1M K⁺, respectively, and A_H/A_D=0.14 (0.03). The changes when cations are present in the reaction are explained in terms of termolecular encounter complex consisting of redox partners, and the cation where the cation can be found in a near proximity of the reaction‐activated complex thus influencing the proton/electron double tunneling event in the PCET process. A molecule of H₂O is involved in the transition state. The resulting ‘configuration’ is more ‘rigid’ and more appropriate for efficient tunneling with Na⁺ or K⁺ (extensive tunneling observed), i.e., there is more precise organized H transfer coordinate than in the case of Ca²⁺ and Mg²⁺ (moderate tunneling observed) in the reaction.     

ACE applied to the quantitative characterization of benzo‐18‐crown‐6‐ether binding with alkali metal ions in a methanol–water solvent system

ACE was applied to the quantitative evaluation of noncovalent binding interactions between benzo‐18‐crown‐6‐ether (B18C6) and several alkali metal ions, Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺, in a mixed binary solvent system, methanol–water (50/50 v/v). The apparent binding (stability) constants (K_b) of B18C6–alkali metal ion complexes in the hydro‐organic medium above were determined from the dependence of the effective electrophoretic mobility of B18C6 on the concentration of alkali metal ions in the BGE using a nonlinear regression analysis. Before regression analysis, the mobilities measured by ACE at ambient temperature and variable ionic strength of the BGE were corrected by a new procedure to the reference temperature, 25°C, and the constant ionic strength, 10 mM . In the 50% v/v methanol–water solvent system, like in pure methanol, B18C6 formed the strongest complex with potassium ion (log K_b=2.89±0.17), the weakest complex with cesium ion (log K_b=2.04±0.20), and no complexation was observed between B18C6 and the lithium ion. In the mixed methanol–water solvent system, the binding constants of the complexes above were found to be about two orders lower than in methanol and about one order higher than in water.     

A Highly K+‐Selective Two‐Photon Fluorescent Probe

A highly K⁺‐selective two‐photon fluorescent probe for the in vitro monitoring of physiological K⁺ levels in the range of 1–100 mM is reported. The two‐photon excited fluorescence (TPEF) probe shows a fluorescence enhancement (FE) by a factor of about three in the presence of 160 mM K⁺, independently of one‐photon (OP, 430 nm) or two‐photon (TP, 860 nm) excitation and comparable K⁺‐induced FEs in the presence of competitive Na⁺ ions. The estimated dissociation constant (K_d) values in Na⁺‐free solutions (K_d^OP=(28±5) mM and K_d^TP=(36±6) mM ) and in combined K⁺/Na⁺ solutions (K_d^OP=(38±8) mM and K_d^TP=(46±25) mM ) reflecting the high K⁺/Na⁺ selectivity of the fluorescent probe. The TP absorption cross‐section (σ_2PA) of the TPEF probe+160 mM K⁺ is 26 GM at 860 nm. Therefore, the TPEF probe is a suitable tool for the in vitro determination of K⁺.     

A Highly K+‐Selective Phenylaza‐[18]crown‐6‐Lariat‐Ether‐Based Fluoroionophore and Its Application in the Sensing of K+ Ions with an Optical Sensor Film and in Cells

Herein, we report the synthesis of two phenylaza‐[18]crown‐6 lariat ethers with a coumarin fluorophore ( 1 and 2 ) and we reveal that compound 1 is an excellent probe for K⁺ ions under simulated physiological conditions. The presence of a 2‐methoxyethoxy lariat group at the ortho position of the anilino moiety is crucial to the substantially increased stability of compounds 1 and 2 over their lariat‐free phenylaza‐[18]crown‐6 ether analogues. Probe 1 shows a high K⁺/Na⁺ selectivity and a 2.5‐fold fluorescence enhancement was observed in the presence of 100 mM K⁺ ions. A fluorescent membrane sensor, which was prepared by incorporating probe 1 into a hydrogel, showed a fully reversible response, a response time of 150 s, and a signal change of 7.8 % per 1 mM K⁺ within the range 1–10 mM K⁺. The membrane was easily fabricated (only a single sensing layer on a solid polyester support), yet no leaching was observed. Moreover, compound 1 rapidly permeated into cells, was cytocompatible, and was suitable for the fluorescent imaging of K⁺ ions on both the extracellular and intracellular levels.     

A Highly K+‐Selective Fluorescent Probe – Tuning the K+‐Complex Stability and the K+/Na+ Selectivity by Varying the Lariat‐Alkoxy Unit of a Phenylaza[18]crown‐6 Ionophore

A desirable goal is to synthesize easily accessible and highly K⁺/Na⁺‐selective fluoroionophores to monitor physiological K⁺ levels in vitro and in vivo. Therefore, highly K⁺/Na⁺‐selective ionophores have to be developed. Herein, we obtained in a sequence of only four synthetic steps a set of K⁺‐responsive fluorescent probes 4 , 5 and 6 . In a systematic study, we investigated the influence of the alkoxy substitution in ortho position of the aniline moiety in π‐conjugated aniline‐1,2,3‐triazole‐coumarin‐fluoroionophores 4 , 5 and 6 [R=MeO ( 4 ), EtO ( 5 ) and iPrO ( 6 )] towards the K⁺‐complex stability and K⁺/Na⁺ selectivity. The highest K⁺‐complex stability showed fluoroionophore 4 with a dissociation constant K_d of 19 mm , but the K_d value increases to 31 mm in combined K⁺/Na⁺ solutions, indicating a poor K⁺/Na⁺ selectivity. By contrast, 6 showed even in the presence of competitive Na⁺ ions equal K_d values (K_d^K+=45 mm and K_d^K+/Na+=45 mm ) and equal K⁺‐induced fluorescence enhancement factors (FEFs=2.3). Thus, the fluorescent probe 6 showed an outstanding K⁺/Na⁺ selectivity and is a suitable fluorescent tool to measure physiological K⁺ levels in the range of 10–80 mm in vitro. Further, the isopropoxy‐substituted N‐phenylaza[18]crown‐6 ionophore in 6 is a highly K⁺‐selective building block with a feasible synthetic route.     

Synthesis and Optical Properties of 2,13‐Dibenzothiazol‐2′‐yldibenzo[b,k]‐18‐crown‐6

A new crown ether of 2,13‐dibenzothiazol‐2′‐yldibenzo[b,k]‐18‐crown‐6 was synthesized from 2,13‐diformyl‐ dibenzo[b,k]‐18‐crown‐6 with 2‐aminothiophenol. The binding behavior and the optical properties of the crown ether were examined through UV‐visible spectroscopy and fluorescence spectroscopy. When complexed with Na⁺, K⁺, Rb⁺ and Cs⁺ ions, it led to intramolecular charge transfer and caused the changes of the fluorescence spectra. The protonation of the crown ether was also studied.     

Luminescence properties of the structure built from 3‐cyano‐4‐dicyanomethylene‐5‐oxo‐4,5‐dihydro‐1H‐pyrrol‐2‐olate and caesium(I)

The structure of caesium(I) 3‐cyano‐4‐dicyanomethylene‐5‐oxo‐4,5‐dihydro‐1H‐pyrrol‐2‐olate (CsA), Cs⁺·C₈HN₄O₂⁻, is related to its luminescence properties. The structure of CsA (triclinic, P) is not isomorphous with previously reported structures (monoclinic, P2₁/c) of the KA and RbA salts. Nevertheless, the coordination numbers of the metals are equal for all salts (nine). Each anion in the CsA salt is connected by pairs of inversion‐related N—H...O hydrogen bonds to another anion, forming a centrosymmetric dimer. The dimers are linked into infinite ribbons, stacked by means of π–π interactions, thus building up an anionic wall. Time‐dependent density functional theory calculations show that the formation of the dimer shifts the wavelength of the luminescence maximum to the blue region. Shortening the distance between stacked anions in the row [from 3.431 (5) Å for RbA to 3.388 (2) Å for KA to 3.244 (10) Å for CsA] correlates with a redshift of the luminescence maximum from 574 and 580 nm to 596 nm, respectively.     

Veronicafolin－β-环糊精的物化表征及Veronicafolin－羟丙基-β-环糊精包合物溶解性的增强

用氢谱、红外光谱、X-射线粉末衍射、热分析、元素分析等测试方法研究了Veronicafolin (3,5,4′-三羟基-6,7,3′-三甲氧基黄酮) 和β-环糊精 (β-CD) 的固体包合物的谱学特征。元素分析结果显示形成Veronicafolin-β-CD·20H2O包合物，其中C：39.58%, H: 5.75%，表明包合物中主客体比为1∶1。该包合类型属于A_L-型。通过紫外-可见分光光度法研究了在羟丙基-β-环糊精（HP-β-CD）的存在下Veronicafolin的相溶解度曲线，测得校正曲线为y = 24148x + 0.0075 (r=0.9999)，相溶解曲线为y=0.4738x-2.0×10^-7 (r=0.9490)，包结平衡常数Ks为4.5×10⁶mol-1。HP-β-CD提高了黄酮醇Veronicafolin的溶解度。     

New Low‐Molecular‐Mass Gelators Based on L‐Lysine: Amphiphilic Gelators and Water‐Soluble Organogelators

The new L ‐lysine alkali‐metal salts 1 – 5 (M⁺=Na⁺ and K⁺) with different alkyl groups at the N^α‐position were easily synthesized, and their hydro‐ and organogelation properties were investigated. All compounds were H₂O‐soluble, and some salts, especially the potassium salts, functioned as a hydrogenator that could gel water below 2 wt‐%. These salts also had organogelation abilities for many organic solvents.     

Sensitive and Selective Fluorescent and Colorimetric Sensor for Ag+ Based on the Supramolecular Self‐Assembly in Semi‐Water

Specific recognition of ultratrace levels of ions in semi‐water using super‐quicker methods is still a challenge for environmental monitoring. Herein we report a fluorescent and colormetric sensor ( ZH ) based on supramolecular self‐assembly, whose structure was destroyed by the addition of ultratrace of silver ions. The process promoted either naked eye visible color changes or fluorescence intensity quenched in conjunction with a wide pH range. Systematic studies revealed very high selectivity (0.07 µmol/L) for silver ions, and other common cations, e.g ., Hg²⁺, Cu²⁺, Cd²⁺, Pb²⁺ had nearly no influence on the sensing behavior. This sensor also served as a multiple use of component in sensing materials by addition of I⁻ into the mixture of ZH and Ag⁺ (about 5 times). What's more, ZH containing filter paper emerged distinct color and fluorescence changes upon exposure to silver (Ag⁺), which could be used as a portable method to undertake field testing for Ag ⁺ .     

Na+ Selective Fluorescent Tools Based on Fluorescence Intensity Enhancements,Lifetime Changes,and on a Ratiometric Response

Over the years, we developed highly selective fluorescent probes for K⁺ in water, which show K⁺-induced fluorescence intensity enhancements, lifetime changes, or a ratiometric behavior at two emission wavelengths (cf. Scheme 1, K1 – K4 ). In this paper, we introduce selective fluorescent probes for Na⁺ in water, which also show Na⁺ induced signal changes, which are analyzed by diverse fluorescence techniques. Initially, we synthesized the fluorescent probes 2 , 4 , 5 , 6 and 10 for a fluorescence analysis by intensity enhancements at one wavelength by varying the Na⁺ responsive ionophore unit and the fluorophore moiety to adjust different K_d values for an intra- or extracellular Na⁺ analysis. Thus, we found that 2 , 4 and 5 are Na⁺ selective fluorescent tools, which are able to measure physiologically important Na⁺ levels at wavelengths higher than 500 nm. Secondly, we developed the fluorescent probes 7 and 8 to analyze precise Na⁺ levels by fluorescence lifetime changes. Herein, only 8 (K_d=106 mm ) is a capable fluorescent tool to measure Na⁺ levels in blood samples by lifetime changes. Finally, the fluorescent probe 9 was designed to show a Na⁺ induced ratiometric fluorescence behavior at two emission wavelengths. As desired, 9 (K_d=78 mm ) showed a ratiometric fluorescence response towards Na⁺ ions and is a suitable tool to measure physiologically relevant Na⁺ levels by the intensity change of two emission wavelengths at 404 nm and 492 nm.     

Micelles as Containers for Self‐Assembled Nanodevices: A Fluorescent Sensor for Lipophilicity

Potentiometric titrations, fluorescence versus pH titrations, dynamic light scattering and fluorescence polarization anisotropy studies demonstrate that inside the nanodimensioned Triton X‐100 micelles, 1‐pyrenecarboxylic acid, PCOO^?, forms an apical complex with the Zn²⁺ cation encircled by a lipophilic cyclen ligand and hugely increasing its fluorescence. The ability of the Zn²⁺‐cyclen‐PCOO^? complex plus its micellar container to act as a fluorescent sensor to evaluate the lipophilicity of molecular species is demonstrated on the fatty acid series CH₃(CH₂)_xCOOH (x=0–16). At pH 7.4 a decrease in fluorescence is observed on the addition of fatty acids that is directly related to their chain length, that is, to their tendency to enter the micellar containers, where they dislocate PCOO^? from the Zn²⁺ centre. The independent determination of fatty acid pK_a values in the presence of Triton X‐100 micelles confirms that our fluorescent micellar device is capable of sensing their lipophilicity.     

Synthesis and Structures of N‐Alkyl‐1,13‐dimethoxychromeno‐ [2,3,4‐kl]acridinium Salts: The Missing Azaoxa[4]helicenium

Helical structures are interesting due to their inherent chirality. Helicenium ions are triarylmethylium structures twisted into configurationally stable helicenes through the introduction of two heteroatom bridges between the three aryl substituents. Of the configurationally stable [4]helicenium ions, derivatives with sulfur, oxygen and nitrogen bridges have already been synthesised. However, one [4]helicenium ion has proven elusive, until now. We present herein the first synthesis of the 1,13‐dimethoxychromeno[2,3,4‐kl]acridinium (DMCA⁺) [4]helicenium ion. A series of six differently N‐substituted DMCA⁺ ions as their hexafluorophosphate salts are reported. Their cation stability was evaluated and it was found that DMCA⁺ is ideally suited as a phase‐transfer catalyst with a pK_R+ of 13.0. The selectivity of nucleophilic addition to the central carbon atom of DMCA⁺ has been demonstrated with diastereotopic ratios of up to 1:10. The single‐crystal structures of several of the DMCA⁺ salts were determined, and structural differences between N‐aryl‐ and N‐alkyl‐substituted cations were observed. The results of a comparative study of the photophysics of the [4]helicenium ions are presented. DMCA⁺ is found to be a potent red‐emitting dye with a fluorescence quantum yield of 20 % in apolar solvents and a fluorescence lifetime of 12 ns. [4]Helicenium ions, including DMCA⁺, all suffer from solvent‐induced quenching, which reduces the fluorescence quantum yields significantly (?_fl<5 %) in polar solvents. A difference in photophysical properties is observed between N‐aryl‐ and N‐alkyl‐substituted DMCA⁺, which has tentatively been attributed to a difference in molecular conformation.     

Influence of fluorine substitution on the molecular conformation of 3′‐deoxy‐3′‐fluoro‐5‐methyluridine

Fluorine substitutions on the furanose ring of nucleosides are known to strongly influence the conformational properties of oligonucleotides. In order to assess the effect of fluorine on the conformation of 3′‐deoxy‐3′‐fluoro‐5‐methyluridine (^RT^F), C₁₀H₁₃FN₂O₅, we studied its stereochemistry in the crystalline state using X‐ray crystallography. The compound crystallizes in the chiral orthorhombic space group P2₁2₁2₁ and contains two symmetry‐independent molecules (A and B) in the asymmetric unit. The furanose ring in molecules A and B adopts conformations between envelope (²E, 2′‐endo, P = 162°) and twisted (²T₃, 2′‐endo and 3′exo, P = 180°), with pseudorotation phase angles (P) of 164.3 and 170.2°, respectively. The maximum puckering amplitudes, ν_max, for molecules A and B are 38.8 and 36.1°, respectively. In contrast, for 5‐methyluridine (^RT^OH), the value of P is 21.2°, which is between the ³E (3′‐endo, P = 18.0°) and ³T₄ (3′‐endo and 4′‐exo, P = 36°) conformations. The value of ν_max for ^RT^OH is 41.29°. Molecules A and B of ^RT^F generate respective helical assemblies across the crystallographic 2₁‐screw axis through classical N—H…O aand O—H…O hydrogen bonds supplemented by C—H…O contacts. Adjacent parallel helices of both molecules are linked to each other via O—H…O and O…π interactions.     

基于杯[4]芳烃和S-联萘酚的荧光传感器的合成及其对N-Boc保护谷氨酸阴离子的对应选择性识别性能研究

合成了一种基于杯[4]芳烃和S-联萘酚单元的新型手性大环受体4,并用荧光光谱和核磁氢谱研究了该受体与阴离子的键合性质。非线性曲线拟合结果表明受体4与N-Boc保护L-和D-谷氨酸阴离子都能通过多重氢键形成1:1的络合物,而且对N-Boc保护谷氨酸阴离子对映体显示了较好的对应选择性识别性能（Kass(L) / Kass(D) = 4.65）。不同的荧光响应表明受体4可以用作N-Boc保护谷氨酸阴离子的对应选择性的荧光化学传感器。     

A Highly Copper‐Selective Ratiometric Fluorescent Sensor Based on BODIPY

A new ratiometric fluorescent sensor ( 1 ) for Cu²⁺ based on 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) with di(2‐picolyl)amine (DPA) as ion recognition subunit has been synthesized and investigated in this work. The binding abilities of 1 towards different metal ions such as alkali and alkaline earth metal ions (Na⁺, K⁺, Mg²⁺, Ca²⁺) and other metal ions ( Ba²⁺, Zn²⁺, Cd²⁺, Fe²⁺, Fe³⁺, Pb²⁺, Ni²⁺, Co²⁺, Hg²⁺, Ag⁺) have been examined by UV‐vis and fluorescence spectroscopies. 1 displays high selectivity for Cu²⁺ among all test metal ions and a ～10‐fold fluorescence enhancement in I₅₈₂/I₅₅₈ upon excitation at visible excitation wavelength. The binding mode of 1 and Cu²⁺ is a 1:1 stoichiometry determined via studies of Job plot, the nonlinear fitting of the fluorometric titration and ESI mass.