Selective pervaporation of water through a nonselective microporous titania membrane by a dynamically induced molecular sieving mechanism

Pervaporation experiments were performed on microporous titania membranes using several binary liquids containing 2-20 wt % water. The membrane was nonselective in the separation of water from alcohols and p-dioxane but showed a remarkably high selectivity in the separation of water from ethylene glycol/water mixtures with < or =15 mol % water. The absence of selectivity under most conditions is explained by the large pore size (0.9 nm) of microporous titania. The high selectivity for water in the separation from ethylene glycol can be explained by the formation of a hydrogen-bonded network of ethylene glycol in the micropores, which blocks transport of ethylene glycol, while water can still permeate through. These networks are disrupted by water at higher concentrations, leading to full loss of membrane selectivity.     

Hydrogels of β-cyclodextrin crosslinked by acylated poly(ethylene glycol): Synthesis and properties

Networks of β-cyclodextrin have been prepared by reaction with acylated poly(ethylene glycol) with a molar mass of 600 g/mol. Samples with different β-cyclodextrin/poly(ethylene glycol) ratios: 1/4, 1/6, 1/8 and 1/10 have been prepared. Both components are bonded by ester groups, resulting in a network that can be degraded by hydrolysis in basic and acidic media. The maximum stability of the hydrogels is reached at pH 4. The hydrogel percentage water content depends on β-cyclodextrin content ranging from 82 to 98, and the swelling data obtained for these hydrogels fit well with a second order kinetics. The sorption behavior of these hydrogels has been tested by employing 1-naphthol as model molecule. The sorption capacity is close to other cyclodextrin networks previously reported and depends on the hydrogel composition and the concentration of 1-naphthol.     

Effects of organic solvents on the partitioning of enzymes in aqueous two-phase systems

Organic solvents (ethylene glycol, glycerol, dimethyl sulphoxide, dimethylformamide, dioxane, methanol and propanol-2, as well as sucrose and urea) have been included in aqueous two-phase (liquid-liquid) systems comprised of water, dextran and poly(ethylene glycol). The concentration of the organic solvent was in most cases 20% (w/w). The influence of these solvents on the phase-forming properties, the volume ratio, the freezing point and the partitioning of a polymer-bound ligand, Procion Red HE-3B poly(ethylene glycol), has been studied. The partition coefficients for alkaline phosphatase decrease with ethylene glycol, glycerol, sucrose and urea (factors of 0.25-0.5), but increase with the other substances (factors of 1.2-1.6). The temperature effects on the partitioning of alkaline phosphatase from calf intestine as well as of phosphofructokinase from yeast in systems containing ethylene glycol have been studied and compared with partitioning in standard systems, not containing solvents. The possible uses of the above systems for partitioning studies of enzymes are discussed.     

Ethylene glycol aluminum as a novel catalyst for the synthesis of poly(ethylene terephthalate)

Ethylene glycol aluminum was prepared efficiently and characterized by FT-IR and NMR.It exhibited higher catalytic activity and had profitable effect than titanium glycolate and ethylene glycol antimony for the synthesis of poly(ethylene terephthalate) (PET).It was only used as polycondensation catalyst because it was sensitive to water.For this catalyst,the degree of esterification of the theoretical amount of water was produced up to 95%at 260℃,while the intrinsic viscosity and content of terminal carboxyl groups of the corresponding PET polyester,polymerized at 280℃,70 Pa for 39 min,was 0.87 dL/g and 23.0μmol/g,respectively. Ethylene glycol aluminum was a promising catalyst for the synthesis of PET polyester.     

THE AQUEOUS PHOTOLYSIS OF ETHYLENE GLYCOL ADSORBED ON GOETHITE

Abstract— Suspensions of goethite (α-FeOOH) were photolyzed in aerated ethylene glycol-water solutions at pH 6.5, with ultraviolet light in the wavelength range300–400 nm. Under these conditions, formaldehyde and glycolaldehyde were detected as photoproducts. Quantum yields of formaldehyde production ranged from 1.9 7times; 10^-5 to 2.9 × 10^-4 over the ethylene glycol concentration range of 0.002-2.0 mol/ℓ, and gave evidence that the reaction occurred at the goethite surface. Quantum yields of glycolaldehyde were 20% less than those of formaldehyde, and displayed a concentration-dependent relationship with ethylene glycol similar to that of formaldehyde. Immediately after photolysis, Fe²⁺ was measured to be 4.6 × 10^-7 mol/ℓ in an aerated suspension containing 1.3 mol/ℓ ethylene glycol, and 8.5 × 10^-6 mol/ℓ in the corresponding deoxygenated suspension. Glycolaldehyde was not generated in the deoxygenated suspensions. These results are consistent with a mechanism involving the transfer of an electron from an adsorbed ethylene glycol molecule to an excited state of Fe³⁺ (Iron[III]) in the goethite lattice, to produce Fe²⁺ and an organic cation. In a series of reactions involving O₂, FeOOH, and Fe²⁺, the organic cation decomposes to form formaldehyde and the intermediate radicals "OH and" CH₂OH. OH reacts further with ethylene glycol in the presence of O₂ to yield glycolaldehyde. Aqueous photolysis of ethylene glycol sorbed onto goethite is typical of reactions that can occur in the aquatic environment.     

Heterogeneous-Catalytic Dimerization of Methanol

Oxide systems supported by -Al₂O₃ and MgO were studied in oxidative dimerization of methanol. The highest selectivity is exhibited by tin oxide promoted with Na₂O and La₂O₃ supported by magnesium oxide. Reactions of partial oxidation and etherification of methanol and ethylene glycol proceed on this system to the same extent as dimerization of methanol to ethylene glycol.     

酸性溶液中钯催化醇电化学氧化的研究

应用电化学循环伏安法(CV)和现场红外光谱(FTIR),研究了酸性溶液中钯催化甲醇、乙二醇电氧化的过程.结果表明:在酸性和中性介质中,甲醇和乙二醇在多晶Pd电极上氧化须在1.5V以上才能发生.随着溶液pH值的降低,过电位减小且峰电流密度上升.溶液的pH值以及电极表面形成的吸附含氧物种对Pd电催化氧化醇有显著的影响.现场红外光谱电化学测试显示,在高电位和强酸性介质中,乙二醇在Pd电极上的氧化产物主要是CO2和少量的乙二酸.在酸性和中性介质中,无论在低电位或高电位,甲醇和乙二醇在Pd上氧化的主要产物是CO2,没有发现CO的存在,说明该氧化过程CO2是经过非毒化的路径产生的.     

气相色谱法检测工业用乙二醇纯度及杂质

以Rtx-624色谱柱（30 m×0.32 mm×1.8 μm）为分析柱进行分析，采用校正面积归一化法，建立了检测工业用乙二醇纯度及其中有机杂质的气相色谱分析法。该法可检测传统乙烯法制得的乙二醇中固有杂质二乙二醇、三乙二醇和1，3-二氧杂烷-2-甲醇，同时也适用于检测草酸酯加氢法制得的乙二醇中的新杂质（1，2-丁二醇、1，4-丁二醇、1，2-己二醇、碳酸乙烯酯等）。结果表明，该法具有良好的重复性和较高的检测灵敏度，检出限最低可达0.0002%（质量分数），回收率在91.2%~105.4%之间。该法在乙二醇生产控制、产品检测、市场贸易等过程中具有良好的应用前景。     

Vapor–liquid equilibrium of systems containing alcohols,water, carbon dioxide and hydrocarbons using SAFT

The statistical associating fluid theory (SAFT) equation of state is employed for the correlation and prediction of vapor–liquid equilibrium (VLE) of eighteen binary mixtures. These include water with methane, ethane, propane, butane, propylene, carbon dioxide, methanol, ethanol and ethylene glycol (EG), ethanol with ethane, propane, butane and propylene, methanol with methane, ethane and carbon dioxide and finally EG with methane and ethane. Moreover, vapor–liquid equilibrium for nine ternary systems was predicted. The systems are water/ethanol/alkane (ethane, propane, butane), water/ethanol/propylene, water/methanol/carbon dioxide, water/methanol/methane, water/methanol/ethane, water/EG/methane and water/EG/ethane. The results were found to be in satisfactory agreement with the experimental data except for the water/methanol/methane system for which the root mean square deviations for pressure were 60–68% when the methanol concentration in the liquid phase was 60 wt.%.     

Condensed-phase effects on the conformational equilibrium of ethylene glycol

Density functional calculations for ethylene glycol (CH₂OHCH₂OH) in the gas and in a dielectric medium are reported. The condensed-phase calculations are based on the self-consistent reaction field approach and the environment has the dielectric constant of liquid methanol. NPT Monte Carlo simulations of ethylene glycol (ETG) in liquid methanol are also reported. The simulations were carried out for three conformers of ETG (tGg′, gGg′, and tTt). Comparison between SCRF results for the conformational equilibrium in the gas and in the dielectric suggests that the tGg′ conformer is slightly stabilized relative to the gGg′ conformer in the solvent. However, the energy difference between them is less the 1.0 kJ/mol, which indicates that frequent interconversions between the tGg′ and gGg′ conformers are expected in the condensed phase. The all-trans conformer (tTt) is higher than the most stable conformer in the gas by 14 kJ/mol. Monte Carlo simulations predict that the tGg′ and gGg′ conformers have very similar energies in the solvent. However, the simulations also show, in agreement with experimental data, that the tTt conformer is stabilized in liquid methanol, relative to the gas phase. The microscopic mechanism leading to the stabilization of the tTt conformer in the liquid is related to the differential hydrogen-bonding formation between the ETG conformers and the methanol molecules. © 1996 John Wiley & Sons, Inc.     

不同形貌ZSM-5分子筛的制备及其催化甲醇转化制烯烃性能

采用廉价的原料,通过添加尿素及调节碱度,在水热条件下合成了具有不同形貌的ZSM-5分子筛。研究了分子筛形貌对甲醇转化制丙烯催化性能的影响。结果表明,通过控制尿素含量及碱度,可以对ZSM-5分子筛晶体的生长方向及形貌进行调控。当urea/SiO₂(mol ratio)=0.28,Na₂O/SiO₂(mol ratio)=0.035时,所得到的分子筛沿b轴方向生长最慢,产品形貌呈薄片状,厚度为130 nm;在一定范围内提高碱度,会使分子筛形貌逐渐变为纳米颗粒聚集体。ICP、NH₃-TPD和N₂吸附表征结果表明,所合成的分子筛SiO₂/Al₂O₃物质的量比、酸性质及孔道性质接近。催化反应评价结果表明,薄片状样品HZ-1由于在b轴方向上具有更短的扩散路径,且结晶度高,在催化甲醇转化反应中不仅表现出良好的选择性,双烯(乙烯+丙烯)收率可达60%以上;P/E比(丙烯/乙烯)最高可达8.4,在连续反应200 h后,甲醇转化率仍保持在95%以上,表现出优异的催化稳定性。     

水溶性聚酯浓溶液的流变特性

研究了由对苯二甲酸二甲酯、间苯二甲酸、间苯二甲酸二甲酯 5 磺酸钠与乙二醇等共缩聚合成的PET型水溶性聚酯浓水溶液 (质量浓度 3 0 % )的流变特性 .研究表明 ,溶液的表观粘度随切变速率的变化规律呈现一定的切力增稠特征 ,流动指数范围为 1 0 4～ 1 2 0之间 ;其lgηa τ曲线呈线性 ,零切粘度值为 1 5 8～3 5 2cP ,随分子量、分子结构和温度而异 ,其中分子链中间苯二甲酸乙二醇酯 5 磺酸钠链节含量对溶液粘度影响较大 ;粘流活化能因分子结构和切变速率而变 ,其值范围为 1 2 0～ 2 3 9kJ/mol.     

Acid-base equilibria in ethylene glycol--II: autoprotolysis constants and acid-base properties of ethylene glycol and its mixtures

The acid-base behaviour of ethylene glycol and its mixtures with water (1, 5 and 10%), methanol, ethanol, isopropanol, nitromethane (each 10%) and ethyl methyl ketone-chloroform (5 + 5%) have been investigated by potentiometric titration, in a cell without liquid junction, equipped with a glass and a silver-silver chloride electrode. The autoprotolysis as well the protolysis constants of phthalic acid were determined for each mixture. The added solvents improve the properties of ethylene glycol, decreasing the viscosity without changing the acid-base behaviour of the ethylene glycol itself, which is favourable for the titration of weak bases. Water increases the basic, and nitromethane the acidic, properties of the mixture. Small quantities of water (ca. 1%) do not impair the titration conditions.     

碳酸乙烯酯选择加氢合成甲醇与乙二醇高效稳定Cu/SiO2催化剂研究

CO2作为重要的碳氧资源, 具有来源丰富、价格低廉、安全等突出优点. 近年来, 由于蕴含的巨大利用潜力,CO2间接利用制备基础化学品、能源燃料对于可持续制备大宗化工品中具有重要研究意义, 日益受到研究者和工业界的广泛重视.甲醇与乙二醇是化学工业中的两种重要大宗原料. 甲醇不仅是重要的有机化工原料、清洁环保的液体燃料, 同时也是氢气和能量储存的良好载体. 乙二醇作为一种重要的有机化工原料, 在聚酯等领域具有广泛应用.CO2经碳酸乙烯酯氢解制备甲醇/乙二醇是典型的原子经济反应, 对资源、能源和环境的可持续发展具有重要意义. 需要指出的是,CO2与环氧乙烷环加成制备碳酸乙烯酯已具备成熟的工业化技术. 因此, 该路线研究重点在于发展碳酸乙烯酯选择加氢联产甲醇和乙二醇高效稳定的催化体系. 近年来, 铜基多相催化剂催化碳酸乙烯酯加氢联产甲醇乙二醇得到了广泛重视. 由于铜基催化剂存在活性较低、高温易失活等问题, 开发高效且具有良好稳定性的铜基催化剂是目前碳酸乙烯酯加氢研究重点.本文针对碳酸乙烯酯选择氢解合成甲醇乙二醇新型铜基催化体系构建和构效关系研究, 采用硅溶胶蒸氨法制备高分散 Cu/SiO2过程中引入多羟基β-环糊精修饰催化剂前驱体的合成策略, 并通过惰性气体中煅烧后的积碳有效抑制活性铜物种的团聚, 获得了β-环糊精改性的 Cu/SiO2催化剂. 通过 N2吸脱附、XRD、N2O 滴定、H2-TPR、TEM 和 XPS 等系统表征,发现β-环糊精可有效调控催化剂结构和表面不同价态活性铜物种分布. 碳酸乙烯酯加氢性能评价结果表明引入适量β-环糊精的 5β-25%Cu/SiO2具有较优催化活性, 乙二醇选择性 98.8% 和甲醇选择性 71.6%, 且相应的催化活性可达 1178 mgEC gcat-1h-1. 高活性的原因很可能归因于不同价态 Cu0与 Cu+物种协同催化作用及适宜的 Cu+/(Cu0+Cu+) 比例. 结合密度泛函理论模拟计算, 我们提出了 Cu0促进氢气解离、Cu+吸附活化碳酸乙烯酯分子中酯羰基的反应机理. 催化剂重复使用和表征结果表明, 5β-25%Cu/SiO2具有良好的稳定性, 使用前后铜粒子大小和铜物种分布几乎未发生明显变化. 本文为解决铜基催化剂高温易烧结等难题提供了简单有效的活性铜物种稳定化方法, 并为CO2经碳酸乙烯酯绿色合成甲醇、乙二醇高效稳定铜基催化新体系的构筑提供了有益借鉴.     

Solvation of amides of carboxylic acids in aqueous solutions of ethylene glycol

Enthalpies of solution of amides of formic, acetic, and propionic acids with different degrees of N-substitution in aqueous solutions of ethylene glycol were measured at 298.15 K. The concentration of ethylene glycol did not exceed 4 mol kg^–1. The reasons for increasing endothermic values of the enthalpies characterizing the amide transfer from water to a mixed aqueous-organic solvent on going from primary to tertiary amides and from formamides to the corresponding acetamides are discussed. The enthalpic coefficients of pair interactions between amides and ethylene glycol in water were calculated. The endothermicity of the interaction of the alkyl groups of the amide molecules with ethylene glycol results in positive values of the coefficients. The coefficient values increase with the enhancement of the hydrophobic properties of hydrophilic non-electrolytes (urea, formamide, ethylene glycol) due to an increase in the contribution of the hydrophobic component and a decrease in the contribution from the interaction of the polar groups of amides to the total interaction.     

Gas Chromatography–Mass Spectrometric Determination of Traces of Ether-Type Icing Inhibitors in Free-Floating Fuels

A gas chromatographic–mass spectrometric (GC–MS) assay method has been developed for simultaneous determination of ethylene glycol monomethyl ether (EGME) and diethylene glycol monomethyl ether (DEGME) in spilled aviation fuels. Ethylene glycol monobutyl ether (EGBE) and ethylene glycol monoethyl ether (EGEE) were used as internal standard and surrogate, respectively. Sample preparation consisted of back-extraction with 7 mL dichloromethane after extraction of 50 mL of fuel with 2 mL of water. The extract was concentrated to dryness, dissolved in 100 L methanol, and analyzed by GC–MS with selected-ion monitoring (SIM). The peaks had good chromatographic properties on a semi-polar column. EGME and DEGME were extracted from fuel with high recovery of 75 and 85%, with small variations, respectively. Method detection limits were 1.3 and 1.0 ng mL^–1 for EGME and DEGME, respectively, in spilled fuel. DEGME was detected at concentrations of 22.6 and 19.7 ng mL^–1 in two samples from among five free-floating samples collected in a tunnel of a subway station located in the vicinity of an army base in Korea. The method might be useful for differentiation between the fuel-types kerosene and JP-8, which might originate from a storage tank.     

High immobilization of antibacterial moieties onto monodisperse microspheres by dispersion polymerization using bicationic viologen surfmer

In order to achieve monodisperse particles with high content of antibacterial groups covalently bonded on surface, a bicationic viologen,N-hexyl-N’-(4-vinylbenzyl)-4,4’-bipyridinium bromide chloride(HW) was devised as a surfmer in dispersion polymerization of styrene(St) using a mixture of methanol(or ethylene glycol) and water as media.Effects of content of HW,its addition profile and composition of reaction media on particles size and incorporation of HW moieties were mainly investigated.The attachment of silver and gold nanoparticles on particle surface under UV irradiation ascertained the surface-bonded HW segments.SEM,TEM observations and XPS,zata potential measurements indicated that increase of initial HW contents and addition of HW(when polymerization had been performed for 3 h) led to grown particles and enhanced immobilization of HW moieties.Using a mixture of ethylene glycol and water as reaction media, small particles(520-142 nm) with highly attached HW moieties were prepared.Furthermore,antibacterial efficacy of the resultant particles against S.aureus was assayed,and particles with more HW moieties anchored on surface demonstrated greater efficiency of antibacterial activity.     

Experimental and thermodynamic modelling of systems containing water and ethylene glycol: Application to flow assurance and gas processing

Accurate knowledge of hydrate phase equilibrium in the presence of inhibitors is crucial to avoid gas hydrate formation problems and to design/optimize production, transportation and processing facilities. In this communication, we report new experimental dissociation data for various systems consisting of methane/water/ethylene glycol and natural gas/water/ethylene glycol. A statistical thermodynamic approach, with the Cubic-Plus-Association equation of state, is employed to model the phase equilibria. The hydrate-forming conditions are modelled by the solid solution theory of van der Waals and Platteeuw. The thermodynamic model was used to predict the hydrate dissociation conditions of methane and natural gases in the presence of distilled water or ethylene glycol aqueous solutions. Predictions of the developed model are validated against independent experimental data and the data generated in this work. A good agreement between predictions and experimental data is observed, supporting the reliability of the developed model.     

Dynamic deswelling studies of poly(N-vinyl-2-pyrrolidone/itaconic acid) hydrogels swollen in water and terbinafine hydrochloride solutions

Deswelling kinetics of water and terbinafine hydrochloride adsorbed poly(N-vinyl-2-pyrrolidone/itaconic acid) P(VP/IA) hydrogels were investigated. Hydrogels were prepared by irradiating the ternary mixture of VP/IA and cross-linking agent ethylene glycol dimethacrylate (EGDMA) in water by γ-rays at ambient temperature. Hydrogels swelled in pure water and terbinafine hydrochloride (TER-HCl) solutions at room temperature and deswelling or water loss were investigated between 4 and 45 °C temperature range and on human skin. The influence of IA content, % swelling, temperature and TER-HCl content on the water loss from gel matrix were investigated. Induction time for 80% water loss from hydrogel systems are found to increase from 9.6 to 21.2 h by increasing IA content in the gel system at 25 °C and decreased by 11 h with addition of TER-HCl in the gel system. Kinetic analyses had shown that the basic properties affecting the water loss behavior of these hydrogels are the IA and TER-HCl content and temperature of the medium.     

Molecularly imprinted solid-phase extraction of naphthalene sulfonates from water

A new polymeric sorbent synthesised by exploiting molecular imprinting technology has been used to selectively extract naphthalene sulfonates (NSs) directly from aqueous samples. In the non-covalent molecular imprinting approach used to prepare this polymer, 1-naphthalene sulfonic acid (1-NS) and 4-vinylpyridine (4-VP) were used as a template molecule and functional monomer, respectively, and both dissolved in a mixture of methanol/water (4:1) as porogen together with the cross-linker ethylene glycol dimethacrylate. The new non-covalent molecularly imprinted polymer (MIP) prepared in aqueous environment was used as a sorbent in solid-phase extraction (SPE) to selectively extract a group of naphthalene mono- and disulfonates. When one litre of a standard aqueous solution, which contained a mixture of eight NSs, was percolated through the SPE cartridge, all the NSs were retained on the MIP because of the cross-reactivity of the polymer. Recoveries were higher than 80% for all the compounds even after a clean-up step with methanol (MeOH). The MIP was also used to analyse water from the Ebro river.