Strahlungschemie von Kohlenwasserstoffen. 17. Mitteilung. Hexan-NO

The influence of NO on the radiolysis of hexane at ?70°C has been studied. The results allow the following interpretations: The bimolecular part of the hydrogen production is in contrary to N₂O efficiently quenched by NO. This part involves non-thermal hydrogen atoms and has a G-value of about 1.4. All olefins are suppressed, probably in a secondary chain reaction with NO. The radical yield is drastically reduced by very low concentrations of NO, but by higher concentrations this decrease is slowed down. A reaction scheme proposed by BURRELL is able to explain these results.     

Azinyl sulfides. L.

The title compound, C₁₉H₁₃N₃S, is folded, with the central ring in a boat conformation. The folding angle between the two quinoline rings is 150.2 (1)°. The 14‐methyl substituent is in a quasi‐axial orientation with respect to the thia­zine ring. The S?N—C_methyl angle is 120.1 (1)°.     

Cover Picture: Angew. Chem. Int. Ed. 12/2002

The cover picture shows the thermally induced shape‐memory effect for a covalently cross‐linked polymer network. The polymer in its temporary shape (cube, picture on top) is heated from room temperature up to 70°C. Within 60 seconds the sample recovers its memorized, permanent shape of a nearly planar foil (picture on top left). The visual change of the material from opaque to transparent is caused by the melting of crystallites of the switching segments. The scheme in the center of the picture illustrates the molecular mechanism of the shape‐memory effect. The shown polymer network, which is synthesized from poly(ε‐caprolactone)dimethacrylate as macromonomer, is one of the first polymer systems that have specifically been developed for applications in the biomedical field. The net points (black) determine the permanent shape while the crystallites (blue) stabilize the temporary shape. More on the current state and the potential of this technology can be found in the review by A. Lendlein and S. Kelch on p. 2034 ff.     

Crystal structures of synthetic analgetics. V. Dextromoramide.

The molecular and crystal structure of dextromoramide has been determined by X-ray methods. The crystals are orthorhombic, space group P212121 with unit cell dimensions a = 9.720(4) A; b = 12.226(3) A; c = 18.381(3) A. The structure was determined by direct methods and the model refined to an R-value of 0.036 for 1788 observed reflections. The mean e.s.d.'s in bond lengths and angles are 0.004 A and 0.3, respectively. The morpholine moiety is nearly in antiposition relative to the quaternary carbon atom C6, the pertinent angle C6 - C7 - C9 - N2 being - 159.4. This conformation is similar to that previously reported for the bitartrate of the title compound. The pyrrolidine ring has the envelope conformation and the amide group is strictly planar. The conformation of some acyclic analgetics are discussed.     

13C-NMR. Spectroscopy of naturally occurring substances. XXXII. Vincaleucoblastine and related alkaloids.

The total assignment of the ¹³C-shifts of the complex Vinica rosea L. alkaloids vincaleucoblastine, leurosidine and leurosine and of a synthetic isomer of the latter is presented. The structure of leurosidine is corrected and a tentative structure for the acid-catalyzed product of isomerization of leurosine is proposed.     

Proton N.M.R. lineshape in nematic microdroplets

The dependence of the proton N.M.R. absorption spectrum on nematic director configuration and molecular self-diffusion in nematic submicrondroplets is analysed. The lineshape is evaluated numerically for radial and bipolar director configuration. The motional averaging is taken into account by means of a numerical simulation of the molecular diffusion which induces slow molecular reorientations due to non-uniform orientational ordering in the droplet. This diffusion process strongly affects the absorption spectra of the radial configuration, whereas spectra of the bipolar configuration are only slightly influenced. The possibility of determinating the submicrometre nematic droplet structures using the proton N.M.R. lineshape is discussed.     

Interfacial polycondensation. I.

Interfacial polycondensation is a rapid, irreversible polymerization at the interface between water containing one difunctional intermediate and an inert immiscible organic solvent containing a complementary difunctional reactant. It is based on the Schotten-Baumann reaction in which acid chlorides are reacted with compounds containing active hydrogen atoms (—OH, —NH and —SH). A large number of polymers (heat-sensitive and infusible as well as stable and meltable) can be prepared. The method has been applied to the preparation of polyurethanes, polyamides, polyureas, polysulfonamides, and polyphenyl esters. Interfacial polycondensations are run in simple, open laboratory equipment with or without stirring. With suitable agitation granular or powdered polymers with high molecular weight are prepared at room temperature and isolated within a few minutes. The intermediates need not be absolutely pure or in balance nor is a quantitative yield needed in order to obtain high polymer. The major variables in the interfacial polycondensation process are discussed and the laboratory techniques and principles are contrasted with melt polycondensation.     

Strahlungschemie von Kohlenwasserstoffen. 18. Mitteilung. Hexan-N2O

N₂O has the following effects on the radiolysis of light and heavy hexane: It decreases the bimolecular part of the hydrogen production. A corresponding N₂-production amounts to the double of this decrease. The speed of competition is very much faster at higher temperature. The amount of C? C bond split yielding alkyl radicals is decreased but not suppressed. The initial amount of hexyl radicals formed is not changed and shows no isotope effect, whereas an additional production of these radicals shows such an effect. They are probably formed by the abstraction by OH-radicals that are products of the neutralization reaction of N₂O^? with the hexyl cation. This additional amount contributes mainly to the 3-hexyl-isomer. The part of the additional hexene formation that exceeds the amount produced by disproportionation from hexyl radicals is formed in a unimolecular process yielding water as the second product. This is a main product, hexanols and hexanones have not been found. A partial product balance involving hydrogen, hexyl and hexene is presented. The disproportionation/combination ratio for hexyl radicals is according to this balance 0.75.     

Proton N.M.R. lineshape in nematic microdroplets

The dependence of the proton N.M.R. absorption spectrum on nematic director configuration and molecular self-diffusion in nematic submicrondroplets is analysed. The lineshape is evaluated numerically for radial and bipolar director configuration. The motional averaging is taken into account by means of a numerical simulation of the molecular diffusion which induces slow molecular reorientations due to non-uniform orientational ordering in the droplet. This diffusion process strongly affects the absorption spectra of the radial configuration, whereas spectra of the bipolar configuration are only slightly influenced. The possibility of determinating the submicrometre nematic droplet structures using the proton N.M.R. lineshape is discussed.     

Strahlungschemie von Kohlenwasserstoffen. 16. Mitteilung. Benzol-Brombenzol

The decrease of the concentration of bromobenzene and the formation of biphenyl and bromobiphenyl have been studied in the system benzene-bromobenzene under the influence of γ-rays. Bromobenzene is in competition with its own products for the reactive state of benzene or it can transfer its energy to its products. The rate of this transfer to decomposition is 74 l/Mol. With the help of additives it has been shown that they can act in two ways: firstly they compete with bromobenzene for an activated state of benzene in a reaction that does not depend on temperature. The nature of this activated state has not been determined. Secondly they scavenge phenyl radicals that have been formed in about 70% of the decomposed bromobenzene molecules. This yield depends slightly on temperature. The relative reactivities compared to bromobenzene for the first case and to benzene in the second have been determined as follows: naphthalene (0.6; 23); anthracene (5.8; 800); benzophenone (0.5; 17); cyclohexene (-; 20); N₂O (0.018; -); NO (1.7; 250); O₂ (-; 3400). Naphthacene in benzene is strongly decomposed in the presence of bromobenzene, but it also enhances the decomposition of the latter.     

Crystal structures of synthetic analgetics. IV. Dextropropoxyphene.

The molecular and cystal structure of dextropropoxyphene has been determined by X-ray methods. The crystals are monoclinic, space group P21, with unit cell dimensions a=9.257(2) A; b=9.048(3) A; c=12.074(7) A; beta=93.01(4)degrees. The phase problem was solved by direct methods and the model refined to an R-value of 0.038 for 1799 observed reflections. E.s.d's are, in average, 0.004 A and O.3 degrees in interatomic distances and angles, respectively. The propylamine chain in nearly fully extended, the dihedral angel C4-C5-C7-N being -174.2 degrees. The conformation of this side chain is similar to that in the hydrochloride of the title compound. Thus the proposed bioactive conformation is not preferred by propoxyphene in the crystalline state, as was the case for the free base of methadone.     

Eine neue Fulvensynthese. 4. Mitteilung

Fulvenes are prepared by condensation of sodium cyclopentadienide with x-acetoxy-x-chloro-hydrocarbon derivatives, followed by elimination of acetic acid with triethylamine. The yields are approximately 60% for 6-alkylfulvenes and similar to those of the classical synthesis for 6, 6-polymethylenefulvenes. The reaction is carried out at low temperatures and under water-free conditions. The purification of the fulvenes is simple.     

Phosphorus-31 Fluorine-19 N.M.R. Through-Space Coupling

Abstract

Through-space coupling, which may be observed when NMR active nuclei are close in space, is additive to any through-bond coupling. The magnitude of the coupling via the through-space mechanism varies according to the element, its valency and the distance between the coupled atoms-independently of the number of bonds separating the coupled atoms. The couplings between carbon-bound fluorine and phosphorus (in its three valent three coordinate state) have been studied using a series of 0-(trifluoromethyl)phenylphosphanes (1). The phosphorusfluorine coupling is lowest (29. 6Hz) for the primary phosphine (1, Y = H). It is 43 Ha for the diethylamino derivative (1, R = Et₂N), rising to 53–56 Ha when Y is phenyl, heteroaromatic, alkyl and ethoxy groups, and then to 63 and 68 Hz for the phenoxy and fluoro derivatives. The PF coupling is largest (85–88 Hz) for the dichloro and dibromo compounds. The coupling constants are zero or close to aero for the corresponding salts, oxides and sulphides. The changes in the magnitude of the phoaphane couplings are discussed in terms of conformational and electronic influences on a through-space spin-spin coupling mechanism.     

铵梯脲混合炸药中改性硝酸脲和硝酸铵含量的测定

论述了铵梯脲混合炸药中改性硝酸脲和硝酸铵组分含量的一种快速准确的化学分析测定方法。该法在研制和生产铵脲类炸药的过程中,对选择最佳配比,控制生产和质量把关等有着重要的指导作用。同时笔者对测定方法,反应原理,影响因素等作了深入的探讨与研究。     

Azinyl Sulfides. LXVII.

The title compound, C₆H₇NS, is planar, with endo‐C—N—C bond angles of 118.7 (2) and 118.8 (2)°, and C—S bond lengths of 1.697 (2) and 1.692 (2) Å for the two symmetrically independent mol­ecules. 1‐Methylpyridinium‐4‐thiol­ate is the major contributor to the molecular structure in the solid state.     

Comparative gas chromatographic analysis of narcotics. III. Phenmetrazine hydrochloride.

Chemical signatures of phenmetrazine hydrochloride were studied by gas chromatography. The inter-batch variations of the signatures were found to be large whereas the intra-batch variations were usually small. The method is used for the tracing of seized phenmetrazine hydrochloride samples to common sources, which in turn may permit further tracing back to chains of illicit distribution of this drug. The applicability of the method to other narcotics is also discussed.     

Azole. 44.

The structure analyses of racemic 3‐chloro‐1‐(4‐morpholino‐5‐nitro­imidazol‐1‐yl)­propan‐2‐ol, C₁₀H₁₅ClN₄O₄, (II), and 3‐chloro‐1‐(5‐morpholino‐4‐nitro­imidazol‐1‐yl)­propan‐2‐ol, C₁₀H₁₅ClN₄O₄, (III), have been undertaken in order to determine the position of the morpholine residue in these two isomers. The morpholine residue in (II) is connected at the 4‐position, while in (III), it is connected at the 5‐position of the imidazole ring. The morpholine mean planes and nitro groups in the two compounds deviate from the imidazole planes to different extents. The nitro groups in (II) and (III) take part in the conjugation system of the imidazole rings. In consequence, the exocyclic C—N bonds are significantly shorter than the normal single Csp²—NO₂ bond and the nitro groups in (II) and (III) show an extraordinary stability on treatment with morpholine and piperidine [Gzella, Wrzeciono & Pöppel (1999). Acta Cryst. C 55 , 1562–1565]. In the crystal lattice, the mol­ecules of both compounds are linked by O—H?N and C—H?O intermolecular hydrogen bonds.     

Cover Picture: Angew. Chem. Int. Ed. 6/2002

The cover picture shows the electric eel, Electrophorus electricus, a source for commercially available acetylcholinesterase. In an experiment described by K. B. Sharpless and M. G. Finn and co‐workers on pp. 1053–1057, a femtomolar inhibitor was assembled by the enzyme from a collection of building blocks containing azide and alkyne functional groups, shown floating in solution. The templated 1,3‐dipolar cycloaddition reaction, producing the inhibitor, is represented by the flare of light at the center of the image.     

Laser Doppler anemometry under plasma conditions. Part I. Measurements in a d.c. plasma jet

A study is presented on the use of laser Doppler anemometry (LDA) techniques for the measurement of the gas and particle velocities under plasma conditions. Experimental data is presented for a d.c. plasma jet in which alumina particles are injected under different operating conditions. The results reveal that the plasma velocity at the exit of the jet is of the order of 200–300 m/s. The intensity of turbulence is as high as 30 to 40% in the free shear layer and the particle velocity distribution is shown to be asymmetric, with particle dispersion in the plane of injection considerably more important than that in the perpendicular direction. The average particle velocity depends on the composition of the plasma gas, the torch current, and power.