Preparation, characterization and photocatalytic activity of the neodymium-doped TiO2 hollow spheres

Nd-doped titania hollow spheres were prepared using carbon spheres as template and Nd-doped titania nanoparticles as building blocks. The Nd-doped titania nanoparticles were synthesized at low temperature. The prepared hollow spheres were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS) and UV-vis diffuse reflectance spectrum (DRS). The effects of Nd content on the physical structure and photocatalytic activities of doped titania hollow sphere samples were investigated. Results showed that there was an optimal Nd-doped content (3.9 at.%) for the photocatalytic degradation of dye X-3B (C.I. Reactive Red 2). The apparent rate constant of the best one was almost 9 times as that of P25 titania. The mechanism of photocatalytic degradation of dyes under visible light irradiation was also discussed.     

硫和银共掺杂介孔TiO2的制备、表征及其对染料的光催化降解活性

以P123为模板,以钛酸四正丁酯、硝酸银和硫脲为原料采用模板法制备了一系列硫和银共掺杂介孔TiO₂光催化材料．利用SEM、XRD、BET和紫外-可见光谱等技术对其形貌、晶体结构及表面结构、光吸收特性等进行了表征．以甲基橙溶液的光催化降解为模型反应,考察了不同掺杂量的样品在紫外和可见光下的光催化性能．结果表明,用模板法制备的共掺杂介孔TiO₂光催化材料在紫外和可见光条件下较纯介孔TiO₂和单掺杂介孔TiO₂对甲基橙溶液具有更好的光催化降解效果, 且硫和银的掺杂量及样品焙烧温度显著影响该材料的催化性能．当硫掺杂量为2mol%和银掺杂量为1mol%,在500 oC 焙烧2 h所得光催化材料的催化性能最佳,4 h即可使甲基橙的降解率达98.8%,重复使用4次仍可使甲基橙的降解率保持在87.5%以上     

Properties of carbon and iron modified TiO2 photocatalyst synthesized at low temperature and photodegradation of acid orange 7 under visible light

The nanoparticles of TiO₂ modified with carbon and iron were synthesized by sol-gel followed solvothermal method at low temperature. Its chemical composition and optical absorption were investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), photoluminescence emission spectroscopy (PL), UV-vis absorption spectroscopy, and electron paramagnetic resonance (EPR). It was found that carbon and iron modification causes the absorption edge of TiO₂ to shift the visible light region. Fe(III) cation could be doped into the matrix of TiO₂, by which could hinder the recombination rate of excited electrons/holes. Superior photocatalytic activity of TiO₂ modified with carbon and iron was observed for the decomposition of acid orange 7 (AO7) under visible light irradiation. The synergistic effects of carbon and iron in modified TiO₂ nanoparticles were responsible for improving visible light photocatalytic activity.     

Visible-light-driven titania photocatalyst co-doped with nitrogen and ferrum

Nitrogen and ferrum co-doped titania photocatalyst was prepared by the sol-gel route. The prepared photocatalyst was characterized by various techniques including X-ray diffraction (XRD), UV-vis diffusive reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), and N₂ adsorption-desorption isotherm. The photocatalytic activity of the co-doped titania photocatalyst was evaluated by the degradation of methyl orange (MO) from aqueous solution under visible light irradiation and was compared with that of the commercial TiO₂ photocatalyst (Degussa P25). The results revealed that the nitrogen doping could lead to the response to visible light and that the ferrum doping could improve the photocatalytic performance. The effects of the component and the annealing temperature of the co-doped titania photocatalyst on the photocatalytic activity were investigated.     

Synthesis of nanocrystalline titania in pure water by pulsed Nd:YAG Laser

Synthesis of titania (TiO₂) nanoparticles (NPs) has been performed with pulsed laser ablation (PLA) approach by irradiating a 1064 nm Nd:YAG laser pulses on the titanium target immersed in pure water. A systematic characterization on the products, synthesized in different laser pulse energies, illustrated the conspicuous dependence of crystalline phase and size distribution of the NPs on this parameter. Emission spectroscopy of the induced plasma was exploited to justify the formation of titania NPs through the synthesis process, as well as the emergence of rutile phase beside the anatase by increasing the laser pulse energies. In addition, UV-vis optical absorption and Raman spectroscopy, associated with X-ray diffraction (XRD) were employed to quantitatively determine the crystalline phases of the products. Morphological observations by means of transmission electron microscopy (TEM), demonstrating the spherical shape of the synthesized NPs, was utilized to investigate the variation of particle size distribution with the laser pulse energy.     

氧化铁掺杂TiO_2和TiO_2/SiO_2的Raman光谱(英文)

采用Sol Gel法制备氧化铁掺杂TiO2 和TiO2 /SiO2 纳米粒子及在玻璃表面的涂膜 ,并用Raman光谱研究氧化铁含量对TiO2 和TiO2 /SiO2 结构的影响。该产物对水和大气中的有机污染物有催化降解作用。     

Visible-light-driven titania/silica photocatalyst co-doped with boron and ferrum

The sol-gel route was employed to prepare a titania/silica photocatalyst co-doped with boron and ferrum. The microstructure and the optical property of the photocatalyst were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV-vis diffusive reflectance spectroscopy (DRS), Fourier transform infrared spectroscopy (FT-IR), and N₂ adsorption-desorption isotherm. The decomposition of phenol under visible light irradiation was used as probe reaction to evaluate the photocatalytic activity. The results revealed that the dopants could inhibit phase transformation of TiO₂, and that there were intimate molecule-level interactions between titania and silica. The doping boron led to the response to visible light. The doping ferrum, which existed in the form of Fe₂O₃ and dispersed on the surface of TiO₂, increased photoquantum efficiency and resulted in the enhancement of catalytic performance. The photocatalytic activity related to the annealing temperature and component. The synergistic effects of co-doping and intimate interaction between titania and silica were responsible for the increase of photoactivity.     

Removal of chromium(VI) and dye Alizarin Red S (ARS) using polymer-coated iron oxide (Fe3O4) magnetic nanoparticles by co-precipitation method

The present research was conducted with an aim to develop such adsorbent system: polymer-coated magnetic nanoparticles which can remove heavy metal and dye from water of different concentration. Synthesis of magnetic iron oxide nanoparticles for contaminated water purification has been one of the outcomes of application of rapidly growing field of Nanotechnology in Environmental Science. In the present study, the efficiency of magnetic nanoparticles for removal of Cr(VI) and dye (alizarin) from water solutions of known concentrations were evaluated. The nanoparticles were prepared by co-precipitation method and characterized by X-ray photoelectron spectroscopy, transmission electron microscopy, and Fourier transform infrared spectroscopy. Polymer-coated magnetic iron oxide nanoparticles carrying functional groups on their surface were synthesized by different methods for permanent magnet-assisted removal of heavy metal (chromium) and dye (Alizarin Red S) from water. The characterization showed that synthesized nanoparticles were in the size range of 10–50 nm. The adsorption capacities of the Fe₃O₄ using polyMETAC-coated particles for dye (Alizarin Red S) removal were 80–96 % and chromium 62–91 %. The chromium concentration was determined after magnetic separation using atomic absorption spectrophotometer and dye concentration was estimated with UV–visible spectrophotometer. Nanoparticles of polymer coated showed the highest removal capacity from water for metal and dye. The developed adsorbents had higher capacity for removal of heavy metal ions and dye.     

A one-pot method to prepare N-doped titania hollow spheres with high photocatalytic activity under visible light

N-doped titania hollow spheres (NTHS) were prepared by a one-pot hydrothermal method using urea as precursor of nitrogen. The prepared hollow spheres were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectroscopy (XPS) and UV-vis diffuse reflectance spectrum (DRS). The photocatalytic activity of as-prepared titania hollow spheres was determined by degradation of Reactive Brilliant Red dye X-3B (C.I. reactive red 2) under visible light irradiation, and was compared to non-doped titania hollow spheres and commercial P25 titania. Results indicated that the as-prepared NTHS showed highest photocatalytic activity.     

Visible-light-induced degradation of formaldehyde over titania photocatalyst co-doped with nitrogen and nickel

Titanium isopropoxide, ammonium carbonate and nickelous nitrate were used as the sources of titanium, nitrogen, and nickel to prepare titania photocatalyst co-doped with nitrogen and nickel by means of the modified sol-gel method. The photocatalyst was characterized by X-ray diffraction (XRD), UV-vis diffusive reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM). The prepared N-Ni co-doped photocatalyst showed optical absorption in the visible light area and exhibited excellent photocatalytic ability for the degradation of formaldehyde under visible light irradiation. The effects of annealing temperature and component on the phase composition and photocatalytic activity were investigated. The results demonstrated that nitrogen atoms was weaved into the structure of titania and led to the response to visible light. However, nickel atoms existed in the form of Ni₂O₃, dispersed on the surface of TiO₂, suppressed the recombination of photo-induced electron-hole pairs, raised the photo quantum efficiency, and led to the enhancement of photocatalytic performance. The increase of photoactivity was attributed to the synergistic effects of co-doping.     

Eu-doped ZnO nanoparticles: Sonochemical synthesis,characterization, and sonocatalytic application

Undoped and europium (III)-doped ZnO nanoparticles were prepared by a sonochemical method. The prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) analysis. The crystalline sizes of undoped and 3% Eu-doped ZnO were found to be 16.04 and 8.22 nm, respectively. The particle size of Eu-doped ZnO nanoparticles was much smaller than that of pure ZnO. The synthesized nanocatalysts were used for the sonocatalytic degradation of Acid Red 17. Among the Eu-doped ZnO catalysts, 3% Eu-doped ZnO nanoparticles showed the highest sonocatalytic activity. The effects of various parameters such as catalyst loading, initial dye concentration, pH, ultrasonic power, the effect of oxidizing agents, and the presence of anions were investigated. The produced intermediates of the sonocatalytic process were monitored by GC–Mass (GC–MS) spectrometry.     

Synthesis, characterization and degradation of Bisphenol A using Pr, N co-doped TiO2 with highly visible light activity

Praseodymium and nitrogen co-doped titania (Pr/N-TiO₂) photocatalysts, which could degrade Bisphenol A (BPA) under visible light irradiation, were prepared by the modified sol-gel process. Tetrabutyl titanate, urea and praseodymium nitrate were used as the sources of titanium, nitrogen and praseodymium, respectively. The resulting materials were investigated by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), UV-vis absorbance spectroscopy, X-ray photoelectron spectroscopy (XPS), N₂ adsorption-desorption isotherm and Fourier transform infrared spectra (FTIR). It was found that Pr doping inhibited the growth of crystalline size and the transformation from anatase to rutile. The degradation of BPA under visible light illumination was taken as probe reaction to evaluate the photo-activity of the co-doped photocatalyst. In our experiments, the optimal dopant amount of Pr was 1.2 mol% and the calcination temperature was 500 °C for the best photocatalytic activity. Pr/N-TiO₂ samples exhibited enhanced visible-light photocatalytic activity compared to N-TiO₂, undoped TiO₂ and commercial P25. The nitrogen atoms were incorporated into the crystal of titania and could narrow the band gap energy. Pr doping could slow the radiative recombination of photogenerated electrons and holes in TiO₂. The improvement of photocatalytic activity was ascribed to the synergistic effects of nitrogen and Pr co-doping.     

Continuous one-step synthesis of N-doped titania under supercritical and subcritical water conditions for photocatalytic reaction under visible light

N-doped titania was prepared continuously by one-step synthetic method under supercritical and subcritical water conditions using titanium(IV)tetraisopropoxide (TTIP) and nitric acid as a titania precursor and nitrogen source, respectively. The synthesized N-doped titania particles were characterized by XRD, N₂-adsorption, TEM, XPS, UV-vis diffuse reflectance spectroscopy. N-doped titania was successfully synthesized and its crystalline structure was homogenous anatase phase with high surface area. The absorption edge of synthesized N-doped titania shifted into the visible light region compared with commercial titania P25. All synthesized N-doped titania have higher photocatalytic activity than P25 under visible light irradiation. The photocatalytic activity of N-doped titania synthesized under supercritical water condition was the highest for the degradation of methyl orange under visible light due to the larger crystallite size compared with the N-doped titania synthesized under subcritical water condition.     

Electron microscopy and EXAFS studies on oxide-supported gold-silver nanoparticles prepared by flame spray pyrolysis

Gold and gold-silver nanoparticles prepared by flame spray pyrolysis (FSP) were characterized by electron microscopy, in situ X-ray absorption spectroscopy (XANES and EXAFS), X-ray diffraction (XRD) and their catalytic activity in CO oxidation. Within this one-step flame-synthesis procedure, precursor solutions of dimethyl gold(III) acetylacetonate and silver(I) benzoate together with the corresponding precursor of the silica, iron oxide or titania support, were sprayed and combusted. In order to prepare small metal particles, a low noble metal loading was required. A loading of 0.1-1 wt.% of Au and Ag resulted in 1-6 nm particles. The size of the noble metal particles increased with higher loadings of gold and particularly silver. Both scanning transmission electron microscopy (STEM) combined with energy dispersive X-ray spectroscopy (EDXS) and X-ray absorption spectroscopy (XAS) studies proved the formation of mixed Au-Ag particles. In case of 1% Au-1% Ag/SiO₂, TEM combined with electron spectroscopic imaging (ESI) using an imaging filter could be used in addition to prove the presence of silver and gold in the same noble metal particle. CO oxidation in the presence of hydrogen was chosen as a test reaction sensitive to small gold particles. Both the influence of the particle size and the alloying of gold and silver were reflected in the CO oxidation activity.     

Preparation and characterization of visible-light-driven titania photocatalyst co-doped with boron and nitrogen

In order to improve the photocatalytic performance of titania under visible light, a boron and nitrogen co-doped titania photocatalyst was prepared. Its photoabsorbance was measured by UV-vis diffusive reflectance spectroscopy (DRS). The microstructure of photocatalyst was characterized using X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The microcrystal of the co-doped photocatalyst consisted of anatase phase and was approximately present in the form of spherical particle. The particle size was in correlation with the calcination temperature. Degradation of phenol under visible light illumination was used to evaluate the photocatalytic performance. The calcination temperature and the component influenced the photoactivity. The results showed that the co-doping of boron and nitrogen played an important role in the band gap decrease, which led to the rise of the photocatalytic activity.     

Synthesis of fluorine-doped titania-coated activated carbon under low temperature with high photocatalytic activity under visible light

Fluorine-doped anatase titania sols were synthesized by hydrolysis of titanium-n-butoxide in the presence of abundant acidic aqueous solution and using ammonium fluoride as fluorine precursors, under mild condition. The prepared fluorine-doped titania nanoparticles were loaded on activated carbon in a rotatory evaporator under vacuum to form a composite photocatalyst. X-ray diffraction, Fourier transform infrared spectrum analysis, UV-visible spectroscopy, scanning electron microscope and Brunauer-Emmett-Teller adsorption measurement were used to characterize these as-prepared powders. The photocatalytic activity of the sample was evaluated by degrading phenol under visible light. Results showed that the composite photocatalyst was porous due to its nano-microstructure. The number of hydroxyl groups on the titania surface was enhanced after fluorine doping. Compared with pure titania-activated carbon and Degussa P25, the as-prepared composite powders exhibited much higher photocatalytic activity, although absorption response range into the visible region was not detected by diffuse reflection spectra.     

Observation of carbon‐facilitated phase transformation of titanium dioxide forming mixed‐phase titania by confocal Raman microscopy

Confocal Raman microscopy, a relatively new and advanced technique, is found to be suitable for imaging the chemical morphology below the submicrometer scale. It has been employed to probe the phase transformation of carbon‐containing titania (TiO₂) nanopowder and titania thin film subjected to laser annealing. The observation of phase transformation from the anatase phase to the rutile phase at high laser power annealing is attributed to carbon inclusion inside or on the surface of titania. Upon annealing, carbon could react with the oxygen of titania and create oxygen vacancies favoring the transformation from the anatase to the rutile phase. This study provides evidence for the carbon‐assisted phase transformation for creating carbon‐containing mixed‐phase titanium dioxide by laser annealing. We explicitly focus on the presence of carbon in the phase transformation of TiO₂ using confocal Raman microscopy. In all of the investigated samples, mixed anatase/rutile phases with carbon specifically was found at the rutile site. X‐ray diffraction (XRD), scanning electron microscopy (SEM) and energy‐dispersive spectroscopy (EDS) studies have been performed in addition to Raman mapping to verify the mixed‐phase titania formation. Copyright © 2010 John Wiley & Sons, Ltd.     

Photopatternable and refractive-index-tunable sol–gel-derived silica–titania nanohybrid materials

Silica–titania nanohybrid materials were synthesized using functionalized organosilanes and organically chelated titanium alkoxide in a simple sol–gel process. The synthesized silica–titania nanohybrid materials exhibited good solution processability and homogeneous dispersion without any phase separation regardless of the ratio of the mixture of the two components. The silica–titania nanohybrid materials exhibited good photoinitiator solubility and effective photocurability with a high degree of degree under ultraviolet (UV) exposure. Because of their high photocurability and solution processability, the silica–titania nanohybrid materials were readily converted into silica–titania nanohybrid films and were used for direct photopatterning without requiring the developing process used in the photomask method. In particular, the refractive indices of the silica–titania nanohybrid materials could be decreased by decreasing the content of chelated titanium alkoxide in the materials. Moreover, the silica–titania nanohybrid films exhibited high transmittance in the visible wavelength range, and their surface roughnesses were very smooth, exhibiting values <1 nm. On the basis of these observations, the fabricated silica–titania nanohybrid materials can be used in solution-processable materials for producing optical and electro-optical elements.     

Tin-Platinum catalysts interactions on titania and silica

Pt-Sn was supported on titania and silica, and the resulting interactions between the components in prepared samples and the resulting interactions between the components before and after treatment with hydrogen were characterized by Mössbauer spectroscopy, X-ray diffraction, Rietveld refinement, high-resolution transmission electron microscopy (HRTEM) and catalytic tests data. Results show the presence of Pt and SnO₂ after calcinations, and Pt₃Sn, PtSn and PtSn₃ after reduction. Rietveld analysis shows that some Ti⁴⁺ are replaced by Sn⁴⁺ atoms in the titania structure. Finally, HRTEM and the practically absence of activity observed confirms that metallic platinum is encapsulated.     

The removal of sodium dodecylbenzene sulfonate surfactant from water using silica/titania nanorods/nanotubes composite membrane with photocatalytic capability

This paper reports experimental results on removal of sodium dodecylbenzene sulfonate (SDBS), using silica/titania nanorods/nanotubes composite membrane with photocatalytic capability. This multifunctional composite membrane has been successfully prepared from colloidal X-silica/titania sols (X denotes molar percent of silica) by the sol-gel technique. The prepared nanorods/nanotubes composite membranes were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), scanning probe microscope (SPM) and UV-vis diffuse reflectance spectra (DRS). XRD patterns confirmed that the embedding of amorphous silica into nanophase titania matrix helped to increase the thermal stability of titania and control the size of titania particles. The small size titania particles with anatase phase played an important role in formation of silica/titania nanorods/nanotubes composite membranes with photocatalytic capability. The percentage of anatase phase titania reached 93% when 20%-silica/titania nanorods/nanotubes composite membrane calcined at 400 °C for 2 h. Most (95%) of the pore volume was located in mesopores of diameters ranging from 1.4 to 10 nm. The experimental results showed that the removal of SDBS achieved 89% after 100 min by combining the photocatalysis with membrane filtration techniques. Although the SDBS was not completely decomposed by photocatalysis, the degradation of the SDBS helped to enhance composite membrane flux and prevent membrane fouling. It was possible to treat successfully surfactant wastewater using multifunctional silica/titania nanorods/nanotubes composite membrane by means of a continuous process; this could be interesting for industrial applications.