Shape variation of cross-linked liquid-crystalline polymers by electric fields

First experiments show that cross-linked liquid-crystalline polymers, which are swollen with nematic low molar mass liquid crystals and freely dispersed in this liquid crystal, change their shape if an electic field is applied. This shape variation depends on the degree of swelling.     

Cholesteric polymers in electric fields

Abstract

The main peculiarities of electric field-induced structural transformations in cholesterol containing comb-shaped polymers are discussed. As for low molar mass cholesterics both the changes in the texture and the untwisting of the helix can be observed. In cholesteric copolymers with a layered order of the side chains the untwisting of the helix results in the formation of a smectic-like structure. The dynamics of the helix untwisting is shown to be controlled by the mobility of the backbone.     

Cholesteric polymers in electric fields

The main peculiarities of electric field-induced structural transformations in cholesterol containing comb-shaped polymers are discussed. As for low molar mass cholesterics both the changes in the texture and the untwisting of the helix can be observed. In cholesteric copolymers with a layered order of the side chains the untwisting of the helix results in the formation of a smectic-like structure. The dynamics of the helix untwisting is shown to be controlled by the mobility of the backbone.     

Adhesive liquid-crystalline polymers

The synthesis and characterization of liquid-crystalline polymers with possible good adhesive properties is reported. These polymers are prepared by alternating copolymerization of maleic anhydride and mesogenic alkenes. The spacer length m is varied (m = 2, 3, 4, 6, 8 and 9) and methoxybiphenyl is used as the mesogenic group. The glass transition temperature decreases and the isotropization temperature increases with spacer length. Depending on the spacer length and temperature, S_B and S_Ad mesophases can be observed. After annealing, spin-coated films of these polymers show very regular layered structures with a layer spacing similar to that in the bulk.     

Mixtures of liquid-crystalline polymers

A density-functional expansion method is used to derive the free energy of a polymer mixture. The expression obtained includes the entropy of mixing, the entropy of configuration of the chains and the interactions (both isotropic and anisotropic ones). The chains are modelled as interacting elastic lines (bend curvature). The method is very general, and we only focus our attention on binary mixtures. The phase diagram and the order parameters are calculated. We show some results for two types of mixtures: a nematic polymer in a non-mesomorphic particle (polymer or solvent) and in another nematic liquid crystal (small-molecule or polymer). We discuss the influence of the molecular weights, the persistence length and the interactions on the phase separation.     

Untwisting of the helical superstructure in the cholesteric and chiral smectic C*phases of cross-linked liquid-crystalline polymers by strain

It is possible to untwist reversibly the helical superstructure of elastomers with cholesteric and chiral smectic C*phases by using strain. In that way a cholesteric structure can be transformed into a nematic structure and a chiral smectic C*into a smectic C structure. The latter case is especially interesting because a structure without a macroscopic polarization (chiral smectic C*) is transformed into one with a macroscopic polarization (smectic C like arrangement).     

Rheology of rodrun liquid-crystalline polymers

The rheological characterization of two commercial thermotropic liquid crystalline polymers based on poly(ethylene terephthalate) (PET) and para-hydroxybenzoic acid (PHB) is carried out. The thermal transitions determined by DMTA are explained by the random character of these copolyesters, in comparison with non-random copolyesters synthesized by Jackson and Kuhfuss. The evolution of the dynamic viscoelastic functions with time in the nematic state is concave in shape for the 20%PET/80%PHB copolymer, a result that leads us to treat this system as a suspension of solid spheres (unmolten crystals) where the volume fraction of crystals increases with time according to an Avrami equation. The response of 40%PET/60%PHB copolymer is similar to a chemical or physical gelation and the hypothesis that the polydomain structure gives rise to a network is considered. Continuous flow, time-independent viscosity results reveal the existence of a three-region flow curve for 40%PET/60%PHB copolymer, but a Newtonian zone followed by a shear thinning region for 20%PET/80%PHB sample. At high temperatures the isotropization of the samples leads to a very strong decrease of the activation energy of flow, which becomes zero for 40%PET/60%PHB. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 253–263, 1998     

Fast switching ferroelectric liquid-crystalline polymers

Ferroelectric liquid-crystalline side chain polymers containing polyacrylate or polysiloxane main chains, a mesogenic unit of three aromatic cores and chiral end groups were synthesized and characterized by D.S.C., optical microscopy, and X-ray diffraction. Polyacrylates with a flexible spacer of eleven methylene groups exhibit fast bistable switching in oriented samples (2 to 4μm cells) with response times of some ms at low D.C. voltages, making these polymers interesting for the fabrication of electrooptical devices. Somewhat longer response times were found for the first switchable polysiloxanes. In this case some problems in obtaining well orientated samples have to be solved.     

Swelling effects in cross-linked polymers by thermogravimetry

A Brazilian coal power plant generates a waste composed by the fly and bottom ashes produced from coal combustion and by a spent sulfated lime generated after SO₂ capture from combustion gases. This work presents a study of the early stages of the hydration of composites formed by this waste and a type II Portland cement, which will be used for CO₂ capture. The cement substitution degrees in the evaluated composites were 10, 20, 30 and 40%, and the effect of the coal power unit waste on the hydration reaction was analyzed on real time by NCDTA, during the first 40 h of hydration. The results show that the higher is the substitution degree, the higher is the retarding effect on the cement hydration process. Actually, by respective thermogravimetric (TG) and derivative thermogravimetric (DTG) analysis on initial cement mass basis, this effect is caused by double exchange reactions among Ca and Mg components of the waste, during the first 4 h of hydration, which promote a much higher exothermic effect in the NCDTA curve, simultaneously to respective induction periods. The pozzolanic reactions, due to the presence of the waste silica and alumina containing amorphous phases, consume part of the original Ca(OH)₂ content existent in the waste in the case of 30 and 40% substituted pastes, and also from part of the Ca(OH)₂ produced in cement hydration reactions, in the case of the 10 and 20% substituted pastes.     

Fast switching ferroelectric liquid-crystalline polymers

The principles of ferroelectricity, especially in liquid crystals (FLC) and polymers, are briefly presented. In a liquid-crystalline side chain polyacrylate electro-optical switching with response times of 200–400 μs was measured. Besides the ferroelectric switching an even shorter electroclinic switching process was detected. The influence of the spacer length and the molecular weight on the ferroelectric properties is discussed. The kind and number of chiral centers and their location in the side group strongly affects the electrooptical properties. In one polymer a change of the optical contrast caused by a sign reversal of the spontaneous polarization was found. In another FLC polymer three switching states (antiferroelectric behaviour) were detected. With coloured and fluorescent FLC polymers, obtained by mixing or by copolymerization new promising applications in electrooptical devices are expected.     

New liquid-crystalline polymers with chiral phases

Liquid-crystalline polyesters with cholesteric and probably chiral smectic C* phases were prepared using combined liquid-crystalline polymers (that is polymers with the mesogenic groups in the main chain as well as in the side groups). Copolyesters of these polymers and polymers with olefinic double bonds could be cross-linked retaining the liquid-crystalline phases. This resulted in cross-linked polymers with elastic properties.     

Multimonomer and cross-linked polymers formed by its copolymerization

Differential scanning calorimetry (DSC) and thermogravimetry (TG) were used to examine the thermal behavior of the multimonomer poly[2-(10-undecenoyloxy)ethyl methacrylate] (PUDEM) within the temperature range from -80 to 400°C. DSC measurements indicated that the polymer side chains were able to crystallize in paraffinic phase. PUDEM, added to methyl methacrylate (MM), can effectively copolymerize with essentially no homopolymer produced as shown by DSC (single T _g). The value of T _g depends on the PUDEM content, degree of cross-linking and the presence of free MM in the cross-linked product. This revised version was published online in August 2006 with corrections to the Cover Date.     

Relaxation of a liquid-crystalline order induced by an electric field

The influence of a strong electric field on isotropic melts of 6-cyanobiphenyl and comb-shaped polyacrylate with mesogenic groups in its side chains is investigated. It is established that the electric field induces the isotropic liquid-nematic liquid crystal phase transition in melts of these compounds. A relaxation process was discovered that destroys the nematic ordering induced in substances by electric fields. It was established that, for polymer liquid crystals, the time of transition from the ordered state to the isotropic phase is several orders longer then that for low-molecular liquid crystal.     

Thermotropic liquid-crystalline polymers. XXVII. Reentrant nematic phase of side chain liquid-crystalline polymers and their optical properties

The phase diagrams of side chain liquid-crystalline acrylic copolymers with cyanobiphenyl mesogenic groups are described. These copolymers are shown to form a reentrant nematic phase. The main regularities of the reentrant behaviour of polymer systems are studied. Certain peculiarities of the electric field induced orientation phenomena are discussed.